}

Provision Of Light At Certain Locations In Tech And Domestic Area At Afs Bihta Under Ge ( Af ) Bihta, Bihta-Bihar

Military Engineer Services-MES has published Provision Of Light At Certain Locations In Tech And Domestic Area At Afs Bihta Under Ge ( Af ) Bihta. Submission Date for this Tender is 01-02-2021. LED Light Tenders in Bihta Bihar. Bidders can get complete Tender details and download the document.




Tender Notice

26590293
Corrigendum : Provision Of Light At Certain Locations In Tech And Domestic Area At Afs Bihta Under Ge ( Af ) Bihta
Open Tender
Indian
Bihar
Bihta
01-02-2021

Tender Details

provision Of Light At Certain Locations In Tech And Domestic Area At Afs Bihta Under Ge ( Af ) Bihta

Corrigendum Details

Sr No CorrigendumDate Corrignedum CorrigendumType NewSubmissionDate
1 14-Jan-2021 Corrigendum No 1 Other 01-02-2021

Key Value

Document Fees
INR 500 /-
EMD
INR 28000.0 /-
Tender Value
Refer document

BOQ Items

Name of Work : Provn of light at certain locations in Tech and Domestic Area at AFS Bihta under GE (AF) Bihta
Sl. No. Item Description Item Code / Make Quantity Units
1 1 M&L for Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m deep for laying of cable/foundation of street light pole including getting out in soft/loose soil complete all as specified and directed. 268 Cum
2 2 M&L for returning filling in, including spreading, leveling,watering and well ramming in layers n.exc 25mm thick in soft/loose soil, complete all as specified and directed . 147.69 Cum
3 3 M&L for removing surplus soil to distance not exceeding 50 M and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed. 120.31 Cum
4 4 M&L for sand cushioning to cable with layer of 8 cm deep before laying the cable and 15 cm depth after laying the cable,and punned down to 10 cm complete all as specified and as directed by Engr-in-Charge. Note : Only punned volume of sand will be measured and paid. 73 Cum
5 5 M&L for laying brick, subclass 'B' well burnt bricks, laid dry flat in trenches for protection of cable with a maximum gap of 10 mm between two consecutive brick over LT cable for protection of cable complete all as specified and as directed. 7.2 Per 1000 Nos.
6 6 M&L for cement concrete 1:4:8 type D-2 using 40mm graded stone aggregates, as in foundation, filling and mass concrete complete all as specified and directed.. 17 Cum
7 7 M&L for cement concrete1:2:4 type B-1 using 20mm graded stone aggregate as in foundations, fillings, mass concrete and as in coping of pole including necessary form work complete all as specified and as directed. 5 Cum
8 8 S&F Steel tubular swaged poles complete with cast iron base plate, finial taper plug, bolts, nuts and screws as specified type 410 SP-31 (9.00 metres long) complete all as specified and directed. Make:National Tubing co.Kanpur/BCW Kanpur/Jindal steel products Howraha/Bombay tube and poles,Mumbai/ 23 Each
9 9 Supply, laying ,jointing & testing of cable XLPE insulated screened PVC bedded, galvanised steel strip or wire armoured, electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of 16 sqmm 4 core, laid in trenches ,ducts,encased in GI pipes,fixed to pole /wall,laid under roads ,path,drains,culverts including all necessary electrical connection with suitable size of Aluminium lugs / gland as required including taking ou/down old u/s cableete all as specified and directed.Make: Havells/Polycab/RR Kable/Nicco/Plaza/Finolex/RPG 1000 RM
10 10 S & F 2.5 sqmm twin core round cable made of PVC insulated and FR PVC round sheathed, copper conductor industrial ,1100 Volt conforming to IS 694 and making necessary connections from Junction box to street light and testing etc complete all as specified and as directed. Make: HAVELLS Cat Pat No. WHMFDSKB22X5 or equivalent make and model of Polycab/KEI/Plaza/ 300 RM
11 11 M&L for GI pipe (light grade) with all fittings laid in trenches/wall complete for protection UG cable when crossing the road of size 40 mm bore complete all as specified and directed. Make: Jindal/swastik/Prakash/Tata 110 RM
12 12 M& L for fixing junction box made of plastic material of size 239X328X129 mm with opaque cover ,conical cable gland aluminium lugs, Protection Class IP 65, 04 nos aluminium bus bar of size 25x4 mm for three phase and neutral including 01 no MCB SP 6 Amps for controlling street light and 2 Nos MS clamp of size 30x5 mm complete with nut, bolt and washers for mounting the junction box on street light pole complete all as specified and directed 23 Each
13 13 M&L for boring of holes manually / machine under road, pavement, hard standing by trenches for laying of 40 mm GI pipe for cable laying, complete all as specified and directed . Note : Cost of GI pipe 40 mm bore light grade demmed to be included in the quoted rate. 40 RM
14 14 M&L for earthing complete with galvanized steel earth plate 600x600x6 mm thick, buried directly in ground (earth pit not less than 2.25 mtr deep below ground level ) with top edge of the plate not less than 1.5 meters below normal ground level, connected to galvanised earth lead wire of 4 mm dia as earthing lead by means of bolts, nuts, check-nuts, and washers of galvanised iron or steel besides welding at all joints as shown in drawings and including excavation and earth work, GI pipe light grade 15 mm bore for protection of GI wire from earth electrode to test point /machinery / equipment. supplying and laying charcoal dust comman salt PCC (1:2:4) type B1 using 20 mm graded stone agregrate chamber and RCC cover 54 cm X 54cm x50 mm thick (1:2:4) type B-1 using 20 mm stone agrigrtae ) reinforced with 8 mm dia TMT bars @ 75mm C/C both ways with mild steel handle 12 mm dia, using round bar ,PGI funnel with wire mesh, 20 mm dia GI pipe medium grade for watering all as shown in electrical plate No-3 of SSR part-1 including testing and taking out the old one complete all as specified and directed Note - Cost of GI wire and GI protection pipe up to a distance 7.5mtr shall be included in quated rate of above Items. 4 Each
15 15 S&F LED Light fitting complete 45 Watt With high power,lower consumption and energy saving,eco friendly,moisture proof having pressure die cast aluminium IP 65 roadway luminaries heat resistant toughened glass with frame better optics for uniform distribution with high power LED as Ligh source complete all as specified and directed. Make - CG Cat Pat No LSTS-45-CDL-M or equivalent make and model of PHILIPS/Havells/Bajaj 26 Each
16 16 S&F street light bracket made out of GI pipe light grade 40mm bore approx length not less than 120cm bend to shape without wielding including new clamps made out of MS flat of size 40x5mm thick, cutting, welding, drilling holes, including nut bolts, washer, etc and applying two coats of aluminium paint over one coat of red oxide primer on MS work complete all as specified and as directed 26 Each
17 17 S & F rectangular LED Flood light 120 Watt having IP 65 protection, eco friendly,lower consumption and energy saving complete all as specified and directed. Make-CG Cat Ref LHB-120-CDL/60-M or equivalent make and model in Philips/Havells.Bajaj 5 Each
18 18 S & F in replacement of old unsv Street light controller of any type into Single phase 3 KW (Swadeep-66-3 KW 1P) with contactor, Incoming MCB & Outgoing MCB rating of 20-25 Amps & main load circuit wiring (copper) of min size 10 Sqmm. The Automatic street light control switch using Infrared sensor based NATURE SWITCH for automatic switching of street lights. Nature switch operation should be based on natural light lux level. Required illuminance level for switching ON is =30 Lux and for switching OFF =Lux. The sensor should also have part night operation facility of minimum 4 hrs to max 12 hrs. The sensor alongwith suitable power contactor(s) and incoming and outgoing MCBs should be enclosed in a pole /wall mountable Rust Proof, Electric shock proof, Terminate proof and FR grade IP66 protection class 2 Enclosure made of thermoplastic polycorbonate and protected against weather influences. The circuit should have provision for manual operation (i,e Sensor By-Pass option). Make of panel consisting of (i) Nature switch - Kakatiya Energy System/Bajaj/Healer (ii) Contactors - BCH/L&T/Schneider (iii) MCBs - Schneider/Hager/L&T(Exora) (iv) Enclosure - Hensel, (v) Circuit wiring - Polycab/Finolex or equivalent. (vi) Contactor should confirm to IEC-60947-4-1/IS-13947-4-1 and MCBs should conform to IEC-60898/IS-8828. 4 Each
19 19 All as per item Ser No 18 here-in-before but for 3 phase Swadeep 66 Series of Max load 8 KW (32 Amps/Phase) Model SWADEEP-66-8KW3P 1 Each
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail