}

Wbphed/Ee/Cmd/Enit15/20-21 Supply-Delivery-Installation-Of-Submersible-Pumping-Machinery-Along-With-Allied-Accessories-Voltage-Stabiliser-And-Chlorinator-For-Tube-Well-No-4-Of-Koyrapur-Water-Supply-Scheme-Under-Cmd-Phed, KOYRAPUR, PURBA BARDHAMAN-West Bengal

Public Health Engineering Department-PHED has published Wbphed/Ee/Cmd/Enit15/20-21 Supply-Delivery-Installation-Of-Submersible-Pumping-Machinery-Along-With-Allied-Accessories-Voltage-Stabiliser-And-Chlorinator-For-Tube-Well-No-4-Of-Koyrapur-Water-Supply-Scheme-Under-Cmd-Phed. Submission Date for this Tender is 08-02-2021. Voltage Stabiliser Tenders in KOYRAPUR, PURBA BARDHAMAN West Bengal. Bidders can get complete Tender details and download the document.




Tender Notice

26589386
Wbphed/Ee/Cmd/Enit15/20-21 Supply-Delivery-Installation-Of-Submersible-Pumping-Machinery-Along-With-Allied-Accessories-Voltage-Stabiliser-And-Chlorinator-For-Tube-Well-No-4-Of-Koyrapur-Water-Supply-Scheme-Under-Cmd-Phed
National Competitive Bid
Indian
West Bengal
KOYRAPUR, PURBA BARDHAMAN
08-02-2021

Tender Details

Supply-Delivery-Installation-Of-Submersible-Pumping-Machinery-Along-With-Allied-Accessories-Voltage-Stabiliser-And-Chlorinator-For-Tube-Well-No-4-Of-Koyrapur-Water-Supply-Scheme-Under-Cmd-Phed

Key Value

Document Fees
Refer document
EMD
INR 20500.0 /-
Tender Value
Refer document

BOQ Items

Name of Work: Supply , delivery & Installation of Submersible Pumping Machinery alongwith allied accessorries , voltage stabiliser and chlorinator for Tube well No. 4 of Koyrapur Water Supply Scheme under CMD, PHE Dte., Dist.- Purba-Bardhaman.
Sl. No. Item Description Item Code / Make Quantity Units
1 1 Supply & delivery of the following Pumping machinery, Electrical accessories etc. at site.\na) Submersible Pumping Machinery, directly coupled with suitable size water proof motor having following specifications.\n P U M P\nDISCHARGE ( 50.00 M3/H // 833 LPM)\nH E A D (53 mtr.)\nS H A F T. Stainless Steel.\nOUTLET SIZE. 80mm. \nPUMP EFFICIENCY IN PERCENTAGE: Minimum 65. \nM O T O R (15 H.P.)\nSubmersible type, 3ph.50Hz, A.C.- 400Volt +10%,\nwet type winding, RPM-2900.\nSIZE OF TUBEWELL : (200mm. x 150mm.dia). and length of Housing pipe 39.84mtr.\nPump motor set must be BEE standard energy star rating (3-5) as per IS – 8034:2002\nMake-KSB/PLUGA/B.G./TEXMO.\nN.B.;- (I) H/Q Characteristic Curve of pump set should be submitted before delivery.\n (II) Test certificate of pump & motor should be submitted during delivery & G.C.\n BI01010001010000000000000515BI0100001113 1 Set
2 1.1 b) 4.0 sq.mm.3core, water proof flat cable, suitable for above pump set. (Make-FINOLEX /GLOSTER /MESCAB /CURRENCY/Crystal /Polycab) BI01010001010000000000000515BI0100001114 90 Mtr
3 1.2 c) 100 A 4 way 415 V wall mounted Busbar Chamber (make (Havels/Standard/Approved Make) BI01010001010000000000000515BI0100001115 1 Each
4 1.3 d) 100 A TPN Main Switch with re-wirable fuse link within sheet steel enclosure(make (Havels/Standard/Approved Make) BI01010001010000000000000515BI0100001116 2 Each
5 1.4 e) Supply and Delivery of 25 mm², 1.1 KV grade. 3.5 core Al Armoured XLPE conform to IS 1554/7098(part-I) 1998 (Make : Gloster /HAVELLS /MESCAB/ CURRENCY/POLYCAB/ CRYSTAL/ Approved Make) BI01010001010000000000000515BI0100001117 20 Mtr.
6 2 Supply & delivery of following materials of best quality. \na) 80mm. N.B. U.P.V.C. column pipe 7.1mm. thick having 70mm. long 8TPI threaded both side with heavy type socket & O ring biax technology with wiring lock system non corrosive high tensile having I.S.O. 9001 standard. (Make : Ashirbad/Raksha). BI01010001010000000000000515BI0100001118
7 2.01 i) 10ft. long (3mtrs) BI01010001010000000000000515BI0100001119 8 Each
8 2.02 ii) 5ft. long (1.5mtrs) BI01010001010000000000000515BI0100001120 2 Each
9 2.03 iii) 80mm. dia. top & bottom adaptor BI01010001010000000000000515BI0100001121 1 Each
10 2.04 iv) 3 " dia. X 5 ft long M.S. (7.1 mm Thick) Column pipe having both side 11 TPI Thread and Socket. BI01010001010000000000000515BI0100001122 1 set
11 2.05 b) Heavy type M.S. Suspension clamp of suitable dia. made of 80mm×10mm M.S. flat with nuts, bolts, washer etc.( suitable for 80mm. dia. column pipe) BI01010001010000000000000515BI0100001123 2 Pair
12 2.06 c) Split type M.S. fabricated tube well cover for 300mm dia. tube well housing pipe with necessary fitting arrangement along with of column pipe, Air pipe, rope of anti snapping device & cable entry gland etc. BI01010001010000000000000515BI0100001124 1 Set
13 2.07 d) 102 mm. dia. 0-7 Kg./sq.cm. range, wall mounted pressure gauge. BI01010001010000000000000515BI0100001125
14 2.08 i) Tube well outside the pump house. (This cost includes 15mm. dia. G.I. pipe Tata medium of appx. 30ft. length & specials) BI01010001010000000000000515BI0100001126 1 Set
15 2.09 e) Depth gauge (Make: H. Guru/Febig) of 102mm. dia. with steel Air pipe of reqd. length (85ft) with all others fittings & accessories for the above work including supplying in one good quality hand pump. \n i) Tube well outside the pump house.(This cost includes 15mm. dia. G.I pipe of appx. 30ft length & Specials) BI01010001010000000000000515BI0100001127 1 Set
16 2.1 f) Anti snapping safety device made of suitable size & heavy type M.S. fabricated busket for resting the above pump set, with eye bolt/H. bolt 25.mm.dia. arrangement (4 ends), clamps for holding pump motor, Nuts & bolts etc. complete as per direction EIC. BI01010001010000000000000515BI0100001128 1 LS
17 2.11 h) 80mm.dia. CIDF Non Rising Spindle Sluice Valve (IS: 14846) with PN1.0 Pressure Rating as per I.S. specification & other required materials for the job i.e for completing the construction of delivery and wash out line.(Make:- IVI / UPADHYA / KIRLOSKAR/Durga/ Jupiter/MAGNET/CAIR) \nN.B: I) Test certificates for both valves should be submitted at the time of delivery.\n II) M. S. Specials should have minimum 7mm.Thickness. BI01010001010000000000000515BI0100001129 1 Each
18 2.12 i) Ø80 mm CIDF single door swing Non Return Valve (IS: 5312, Part-I) with PN1.0 Pressure Rating, (Make:- IVI / UPADHYA / KIRLOSKAR/Durga/ Jupiter /CAIR /MAGNET) BI01010001010000000000000515BI0100001130 1 Each
19 2.13 j) 80mm dia. Three phase, (415V), Actuator operated Wafer type Butterfly Valve (BS: 5155) with PN1.0 Pressure Rating, having valve body of CI(IS: 210, Gr. FG: 260). & shaft of stainless steel (AISI- 410).\n(Make- Actuator- ROTORK/ CAIR/ Limitorque/AUMA,\n Valve – IVI/ UPADHYAY / AUDCO / KBL /Jupiter /CAIR/MAGNET/DURGA(T.C. Needed). BI01010001010000000000000515BI0100001131 1 Set
20 2.14 k) Ø3 " X 2.75 mtr CIDF Pipe BI01010001010000000000000515BI0100001132 2 Each
21 2.15 l) Ø3 " X 1.0 mtr CIDF Pipe BI01010001010000000000000515BI0100001133 2 Each
22 2.16 m) Ø 3 " X 2'-6" CIDF Pipe BI01010001010000000000000515BI0100001134 2 Each
23 2.17 n) Ø 3 " X 2 ft CIDF Pipe BI01010001010000000000000515BI0100001135 4 Each
24 2.18 o) Ø 3 "Flanged tail piece BI01010001010000000000000515BI0100001136 1 Each
25 2.19 p) Ø 3"CIDF Bend BI01010001010000000000000515BI0100001137 5 Each
26 2.2 q)Steel Plug, M. S. Nipple, Flange, Nuts, Bolts etc BI01010001010000000000000515BI0100001138 1 LS
27 2.21 r) Ø 3 "M. S. Cross BI01010001010000000000000515BI0100001139 1 Each
28 3 Supply, delivery & fitting fixing of wall mounted 2mm.thick, CRCA sheet steel, powder coating finish painted, dust & vermin proof, generally conforming to IP-54 Degree of protection front open fully automatic ( PLC operated ) cum manual Motor Control Centre along with electrically operated valve unit complete with following components suitable for pump, 15 H.P. in S / D operating mode, Three phase Butterfly Valve Actuator, 0.5 H.P Chlorinator, Auto Lighting Arrangement & internal wiring.\nThe panel shall be equipped by complete wiring with following devices.\n I. 1) Incomer \na) Suitable capacity MCCB, TPN (63 Amp) (L&T/HAVELLS). \nb) 96Sqmm. (0-30/63), Digital Ammeter with selector switch & C.T .s (AE). \nc) 96Sq.mm.(0 – 600 Volt) Digital Voltmeter with selector switch. (AE) \n d) Red, Yellow & Blue (LED type) Phase indicator lamps.- (KAYCEE) - 3nos.\n2) Outgoing \nAuto/Manual Star- Delta Starter with MPCB along with Actuator operated Butterfly Valve. \na) Suitable capacity, TP, Air Break type Power Contactor with 240 Volt A. C. Coil for Pump Motor. – 3nos. \nb) Micro Processor based Digital Motor Protection Relay with Over load, Locked Rotor & Phase Reversal/ Single Phase protection for Pump Motor. Make:BCH(BOCR-DSB) BI01010001010000000000000515BI0100001140
29 3.1 c) Electronic Stat-Delta timer 0-30sec.(range) -1no.\nd) Programmable logical control (PLC) with suitable i/p & o/p for sequence of automatic operation of Pump-Motor & Valves actuator with 24V D.C power supply unit -1no. \ne) Over Voltage/ Under Voltage Protection Relay. 1 no.\nf) Auxiliary Contactor & Timers for Auto Manual Control Logic.-1set\ng) Suitable capacity Capacitor. -1set\nh) TP, MCB for Capacitor back up protection. -1no\ni) Suitable capacity TP, Air Break Contactor for switching of Capacitor. \nj) Electronic ON Delay Timer for delayed switching of Capacitor. -1no.\nk) Auto/Manual Selector Switch. -1no.\nl) 16Amp, SP, MCB for Control Circuit. -1no.\nm) Suitable capacity contractor for forward & reversed movement of single phase actuator including overload relay. – 1 set. \nII. Starter for1.0 H. P. to 2.0 H. P. Chlorine Machine. \na) 16Amp, TP, 240 Volt, A. C. Coil, Contactor, for Chlorinator. – 1no. BI01010001010000000000000515BI0100001141
30 3.2 b) Metallic Over load Relay of Range 1.5 to 3.0 Amp for Chlorinator.\nc) Level Controller Circuit for Chlorine Tank.\nIII. Yard Lighting Arrangement.\na) 16 Amp, TP, 240Volt A.C. Coil Contactor. -1no.\nb) Programmable Digital Timer for Auto/Manual operation.\nNote : The following 3 items ( a, b & c) are common for above I,II & III \na) ON/OFF/ Trip Indicating Lamp for Pump Motor/Valve Actuator/Chlorinator. – 1set.\nb) Start/Stop, Forwarded/Reverse Push Button for Manual operation of Pump Motor, Actuator & Chlorinator. \nc) Power Terminals for Pump Motor/TPN Yard Lighting/ Chlorine Motor along with Level Controller/SPN internal wiring/Valve Actuator -1set. \n(Make: RNR/ECS/PCF Project/OTHER APPROVED ) BI01010001010000000000000515BI0100001142 1 Set
31 4 Making Brick Pillar for Supporting pipe line (10" X 10 " X 4 ft) by 1st class brick work with 4 :1 plaster and net cement punning complete including earth cutting, supplying necessary materials , ramming as per direction of EIC. BI01010001010000000000000515BI0100001143 3 Each
32 5 Installation of the item no. (1) to (3) with necessary connection complete including supply 12core 1.5sq.mm. copper control cable compensating MS flange nut and Bolts Gasket & other fixing materials to complete the job and making platform of required size around T.W. with bricks, cement , sand stone chips etc(4:2:1) including plastering and net cement complete as per direction and entire satisfaction of the E.I.C. BI01010001010000000000000515BI0100001144 1 LS
33 6 Supplying & fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of 25Sq.mm. XLPE Armoured cables BI01010001010000000000000515BI0100001145 4 Each
34 7 Finishing the end of 25Sq.mm. 31/2 core XLPE Armoured cables by crimping method including supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials with including proper sealing of cable entry point BI01010001010000000000000515BI0100001146 4 Set
35 8 Making necessary non metalic pipe IS-14930 (80mm. dia.) protection for submersible cable from Tube well cover to inside of the pump house including supplying pipe, Elbow, Union, short piece, socket etc. complete for the job as per direction. BI01010001010000000000000515BI0100001147 10 Mtr.
36 9 Double eathing with 50mm. dia. TATA – Medium G.I. pipe 3.64mm. thick × 3.04Mtr. long and 2×4SWG GI (Hot Dip) wire (4Mtr. long), 13mm. dia. × 80mm. long GI bolts, double nuts, double washers including supply & fitting 15mm. dia. G.I. pipe protection (1Mtrs. Long) to be filled with bitumen partly under the ground level and partly above ground level driven to an overage depth of 3.65Mtrs. below the ground level & restoring surface duly rammed. BI01010001010000000000000515BI0100001148 1 L.S.
37 10 Supply, delivery and storage at site of automatically controlled diaphragm type chlorinator dosing pump with flow rate 100 LPH and maximum pressure of 10Kg/CM2 with all accessories for pump & motor, foundation bolt, suction and discharge Flange and with storage tank of dosing solution of 100Ltr. Capacity and the prime mover to be coupled with pump of 0.5 H.P. 3 Phase, 1450 RPM squirrel cage TEFC induciton motor, Motor will be IE2/IE3 (Make of Machine : Swelore/Any other approved, Make of Motor : ABB / CGL /KEC / Any other approved make) BI01010001010000000000000515BI0100001149 1 Each
38 11 Installtion and commissioning of above supplied chlorinator with all accessories, PVC tank and drawing of power line as per IE rules by supplying of necessary wire and continuous earthing. This include the cost of all necessary CC foundation [at least 200mm height] with concrete mixture [sand, cement, stone chips] and neat cement finish by supplyig of all required materials and testing the entire set as per direction of EIC [power will be feed from PLC Panel of pumping machinery] BI01010001010000000000000515BI0100001150 1 Each
39 12 Distribution wiring in 1.1KV. Grade, (2X1.5mm2) single core stranded 'FR' PVC insulated & unsheathed copper wire (approved make) in suitable size PVC casing capping (Precision make) with (1.5 Sqmm) single core stranded 'FR' PVC insulted & unsheathed copper wire for ECC, including necessary PVC clips, fittings etc. to light/fan point with piano key type switch (anchor make) fixed on sheet steel fabricated switch board with Perspex/bakelite top cover on wall including necessary connections and making earthing attachment and mending good damages to building works. [PVC casing-capping and Switch board both on surface] BI01010001010000000000000515BI0100001151
40 12.1 a) average run 4. 5 mtr. - BI01010001010000000000000515BI0100001152 6 Point
41 13 Supply and fitting fixing of 40A DP Isolator (Make : Havells/Standard/ approved make) BI01010001010000000000000515BI0100001153 1 Each
42 14 Supply and delivery of CFL , 23 watt, (Make-phillips/ other approved make) BI01010001010000000000000515BI0100001154 2 Each
43 15 Supply and fitting fixing of Ceiling fan (Make: Usha /Crompton/Havels/ other approved make) 1200mm. sweep complete with blade, rubber bush etc. including supply and fixing 2×1/1.4 PVC copper wire for down rod with making necessary connection complete. BI01010001010000000000000515BI0100001155 1 Each
44 16 Supply & fitting fixing of 10 watt, LED Fixture set ----------for Phillips Model no. BRP 020/10 LED (Make: Phillps/ Other Approved Make) with 40mm. dia. × 2.5mtr. long G.I pipe bracket fixing on wall of the Pump House with 3nos. M. S. clamp properly grouting including making power connection with supply and drawing 2.5sq.mm. copper flexible cable wire with controlling sub switch and continuous earthing from nearest junction board all complete as per direction of E.I.C. BI01010001010000000000000515BI0100001156 3 sets
45 17 Supply of 4ft. 36W Double Fluorescent light fittings complete with all accessories including 2nos. 36W tube light incl. fixing light fitting on wall by means L clamp, nipple, suitable size fastner and connection by 1.5 sqmm PVC/Cu wire as to G S. Model :- TMC0552XTLD36WEBT ( Make- Philips/Havells/Bajaj/ other approved make) BI01010001010000000000000515BI0100001157 1 Set
46 18 Supply and fixing bulkhead light fittings on wall incl. connection. As to Gs .Make -Bajaj/Havells/ other approved make) BI01010001010000000000000515BI0100001158 1 LS
47 19 Supply and delivery at site A.C. 3 ph. Dry type Voltage Stabilizer suitable for unbalanced input voltage (Make: AE/Sen & Pandit / Opto Elec. / ECS/Fizi/other Approved Make)\na) Input:250-500 V 3ph. 50HZ, 4 wire\nb) Output, 415V + 1% 3ph.,50HZ.\nc) Capacity: 20 KVA.\nd) Auto manual switch IS - 9815 (I). \ne) Raise/lower push Button.\nf) Single lamps to indicate and limits of input.\ng) Voltmeter for input and output Voltage. (Manufacturing test certificate should be produced at the time of delivery)\nh) With U/V.O./V.O./L protection with contractor at output side, input MCB & Ammeter etc. ( TC /GC Needed ) BI01010001010000000000000515BI0100001159 1 each
48 20 Supply and delivery the following Electrical Accessories at site BI01010001010000000000000515BI0100001160
49 20.1 A) 25mm²., 1.1KV grade, 3.5 Core, Aluminum Conductor, Armored, XLPE Cable. The material must be confirmed to IS: 1554/7098(PART-1)1988(Make-GLOSTER /Currency / NICCO) BI01010001010000000000000515BI0100001161 15 Mtr.
50 20.2 B) 100 A , 4 pole , 415 V , TPN , OFF load Change Over Switch ( Make -standard/ Havells/ ABB/ Siemens) BI01010001010000000000000515BI0100001162 1 Each
51 21 Installation of the above Voltage stabiliser of above (item No.-I to 2 ) on the foundation incl. Interconnection complete & testing the voltage stabiliser along with other electrical equipments to ensure performance of the equipments in running satisfactorily as per IE Rules & as per direction of E.I.C. incl. testing commissioning complete. BI01010001010000000000000515BI0100001163 1 Each
52 22 Add. GST@12% BI01010001010000000000000515BI0100001164 1 M
53 23 Add. Cess@1% BI01010001010000000000000515BI0100001165 1 M
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail