}

Proposed High Level Rcc Bridge At T03-T03 To Dhangarah Near Dhangarh Tola At Ch- 4.500 Km Under Dighalbank Block, KISHANGANJ-Bihar

Rural Works Department has published Proposed High Level Rcc Bridge At T03-T03 To Dhangarah Near Dhangarh Tola At Ch- 4.500 Km Under Dighalbank Block. Submission Date for this Tender is 18-01-2021. Bridge Work Tenders in KISHANGANJ Bihar. Bidders can get complete Tender details and download the document.




Tender Notice

26582434
Proposed High Level Rcc Bridge At T03-T03 To Dhangarah Near Dhangarh Tola At Ch- 4.500 Km Under Dighalbank Block
Open Tender
Indian
Bihar
KISHANGANJ
18-01-2021

Tender Details

Proposed High Level Rcc Bridge At T03-T03 To Dhangarah Near Dhangarh Tola At Ch- 4.500 Km Under Dighalbank Block

Key Value

Document Fees
INR 10000 /-
EMD
INR 675240.0 /-
Tender Value
INR 3.37 Crore /-

BOQ Items

Name of Work: PROPOSED HIGH LEVEL RCC BRIDGE AT T03-T03 TO DHANGARAH NEAR DHANGARH TOLA AT CH- 4.500 KM UNDER DIGHALBANK BLOCK
Sl. No. Item Description Item Code / Make Quantity Units
1 1 Pile Load Test on single Vertical Pile in accordance with IS:2911(Part-IV) including dynamic load test for its integrity , length & capacity
2 2 a) Initial and routine load test 1968 MT
3 3 b) Lateral load test 51.2 MT
4 4 Upto 3.000 M Depth 446.48 Cum
5 5 Providing service road etc. all complete job as per specifications and direction of E/I. 57.6 RM
6 6 Providing Steel Liner 6 mm thick for Piles including Fabricating and Setting out as per Detailed Drawing. 8.84 MT
7 7 Bored cast-in-situ M35 grade R.C.C. Pile excluding Reinforcement complete as per Drawing and Technical Specifications and removal of excavated earth with all lifts and lead upto 1000 m. 517.8 RM
8 8 Dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of masonry, cement concrete, wood work, steel work, including T&P and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material and stacking the serviceable material with all lifts and lead of 1000 metres(Extra Pile Length). Stripping off RCC M35 in the pile up to cut off level and disposal of debris with all leads and lifts. 472.59 Cum
9 9 Sand Filling in Foundation Trenches as per Drawing & Technical Specification 18.92 Cum
10 10 Providing and laying of PCC M15 levelling course 100mm thick below the pile cap. 18.92 Cum
11 11 Cement Concrete for Reinforced Concrete M - 35 in Pile Cap complete as per Drawing and Technical Specification 320.38 Cum
12 12 Supplying, Fitting and Placing un-coated HYSD bar Reinforcement in Foundation complete as per Drawing and Technical Specifications. 69 MT
13 13 Upto 5 m Hieght 110.84 Cum
14 14 Beyond 5 m and upto 10m Hieght 13.36 Cum
15 15 Upto 5 m Hieght 88.94 Cum
16 16 Beyond 5 m and upto 10m Hieght 16.1 Cum
17 17 Supply Fitting & Fixing Elasto-Meric Bearing & seismic Pad :-- Supplying, fitting and fixing in position true to line and level elastomeric bearing conforming to IRC: 83 (Part-II) section IX and clause 2005 of MoRTH specifications complete including all accessories as per drawing and Technical Specifications. Elastomeric Bearing & Pad 234630 CuCm
18 18 Providing Weep Holes in Abutment Cap with 100mm dia AC Pipe:-- Providing weep holes in Brick masonry/Plain/ Reinforced concrete abutment, wing wall/ return wall with 100 mm dia AC pipe, extending through the full width of the structure with slope of 1V :20H towards drawing foce. Complete as per drawing and Technical Specifications. 110 No
19 19 Supplying, fitting and placing HYSD Bar reinforcement in substructure complete as per Drawing and Technical Specification. 28.88 Mt
20 20 Back filling behind abutment, wing wall and return wall, complete as per Drawing and \technical Specification.(Sandy Material ) 235.71 Cum
21 21 Providing and laying of filter media with granular materials/stone crushed aggregate satisfying the requirement laid down in CI. 2504.22 of MORTH Specification of not less than 600mm behind abutment, wing and return wall to the full height compacted. 102.53 Cum
22 22 Above 10m Hieght (Solid Slab)
23 23 Beyond 5 m and upto 10m Hieght (T Beam Slab) 249 Cum
24 24 Providing HYSD Bar in all types of RCC work:-- Supplying, fitting and placing HYSD bar reinforcement in super-structure complete as per drawing and technical specifications . 36.24 MT
25 25 Wearing Coat :-- Providing and laying Cement concrete wearing coat M-30 grade including reinforcement complete as per drawing and Technical Specifications 37.54 Cum
26 26 Providing RCC M30 Grade In Railing:-- Construction of precast RCC railing of M30 Grade, aggregate size not exceeding 12 mm, true to line and grade, tolerance of vertical RCC post not to exceed 1 in 500, centre to centre spacing between vertical post not to exceed 2000 mm, leaving adequate space between vertical post for expansion, complete as per approved drawings and technical specifications. 135.08 M
27 27 Providing Drainage spout:-- Drainage Spouts complete as per drawing and Technical specification 18 No.
28 28 Providing PCC M15 grade Below Approach Slab:-- PCC M15 Grade leveling course below approach slab complete as per drawing and Technical specification 7.93 Cum
29 29 Providing PCC / RCC M30 in Approach Slab:-- Reinforced cement concrete approach slab including reinforcement and formwork complete as per drawing and Technical specification 15.86 Cum
30 30 Providing and laying of a strip seal expansion joint catering to maximum horizontal movement upto 70 mm, complete as per approved drawings and standard specifications to be installed by the manufacturer/supplier or their authorised representative ensuring compliance to the manufacturer's instructions for installation. 33.8 m
31 31 Providing and applying two coats of water based cement paint to unplastered concrete surface after cleaning the surface of dirt, dust, oil, grease, efflorescence and applying paint @ IL per sq.m. 1000 Sqm
32 32 Numbering & writing Bridge details with 2 coats of enamel paint of approved shade & make including cost of all materials, labour, tools etc. as per SOR Item 8.3 3000 Each Letter X 10Cm Ht
33 33 Providing and Painting of flood gauge on substructure to full height and 500mm wide including cost of all materials, labour, tools etc. 1 L.S
34 34 Providing and erecting direction and place identification retro- reflectorised sign as per IRC :67 made of high intensity grade sheeting vide clause 801.3, fixed over aluminium sheeting, 2 mm thick with area exceeding 0.9 sqm supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm, 2 Nos. firmly fixed to the ground by means of properly designed foundation with M 15 grade cement concrete45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing 1.8 Sqm
35 35 Construction of embankment with material obtained from borrow pits vide S.O.R. item No. 3.16 MOST CI. 305. 1674.77 cum
36 36 Granular sub base Gr-I with close graded material as per MORTH CL. 401. 45 cum
37 37 Laying Reinforced Cement Concrete Pipe NP3 / Prestressed Concrete Pipe on First Class Bedding . 22.5 Rm
38 38 Providing and laying boulders apron on river bed for protection against scour with stone boulders weighing not less than 40 kg each complete as per drawing and Technical specification. 167.97 Cum
39 39 Providing and laying pitching on slopes laid over prepared filter media including boulder apron laid dry in front of toe of embankment complete as per Drawing & Technical Specifications. SOR Item-15.4A (Ref. MORTH CI.2504) 96.08 Cum
40 40 Providing and laying filter materials underneath pitching in slopes complete as per Drawing & Technical Specifications. SOR Item-15.5 48.04 Cum
41 41 Earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with approved material. 199.35 Cum
42 42 Providing PCC M-15 Plain/Reinforced cement concrete in Foundation complete as per drawing and Technical Specifications 190.53 Cum
43 43 Supplying, fitting and placing HYSD Bar reinforcement in Foundation complete as per Drawing and Technical Specification. 2.33 MT
44 44 Providing Weep Holes in Abutment Cap with 100mm dia AC Pipe:-- Providing weep holes in Brick masonry/Plain/ Reinforced concrete abutment, wing wall/ return wall with 100 mm dia AC pipe, extending through the full width of the structure with slope of 1V :20H towards drawing foce. Complete as per drawing and Technical Specifications. 40 No
45 45 Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, up to a lead of 1000 metres including removal and disposal of top organic soil not exceeding 150 mm in thickness. 0.04 Hect.
46 46 Construction of embankment with material obtained from borrow pits vide S.O.R. item No. 3.16 MOST CI. 305. 4278.76 Cum
47 47 Construction of sub-grade and earthen shoulders with approved material obtained from borrow pits with all lifts & leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table No. 300-2 165.6 Cum
48 48 Construction of granular sub-base by providing coarse graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with vibratory roller to achieve the desired density, complete as per clause 401. (Grading-I) 81.6 Cum
49 49 Water Bound Macadam :- Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with 3 wheeled steel/ vibratory roller 8-10 tonnes in stages to proper grade and camber, applying and brooming requisite type of screening/ binding Materials to fill up the interstices of coarse aggregate, watering and compacting to the required density. Grade - III 29.25 Cum
50 50 Providing and applying primer coat with bitumen emulsion on prepared surface of granular Base including clearing of road surface and spraying primer at the rate of 0.60 kg/sqm using mechanical means. 390 Sqm
51 51 Providing and applying Tack coat with bitumen emulsion as per T.S Clause 503 & Direction of E/I. 390 Sqm
52 52 Providing, laying and rolling of close-graded premix surfacing material of 20 mm thickness composed of 13.2 mm to 0.9 mm (Type-B) aggregates using penetration grade bitumen to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 8-10 kN static roller and finishing to required level and grades as per Technical Specification Clause 509 390 Sqm
53 53 Hectometer stone
54 54 Providing boundary pillars and F.I Posts as per S.O.R. Item 8.16, MORTH CL. 806. 48 Each
55 55 ADD FOR LABOUR CESS @ 1% 1 RS.
56 56 ADD FOR GST @ 12% 1 RS.
57 57 ADD SEIGNIORAGE FEE 1 RS.
58 58 Supplying, fitting and fixing in position true to line and level elastomeric bearing conforming to IRC: 83 (Part-II) section IX and clause 2005 of MoRTH specifications complete including all accessories as per drawing and Technical Specifications. & Elastomeric seismic strainer 23463 CuCm
59 59 Providing and laying pitching on slopes laid over prepared filter media including boulder apron laid dry in front of toe of embankment complete as per Drawing & Technical Specifications. SOR Item-15.4A (Ref. MORTH CI.2504) 9.61 Cum
60 60 Providing and laying filter materials underneath pitching in slopes complete as per Drawing & Technical Specifications. SOR Item-15.5 4.8 Cum
61 61 Providing PCC / RCC M30 in Approach Slab:-- Reinforced cement concrete approach slab including reinforcement and formwork complete as per drawing and Technical specification 3.17 Cum
62 62 Wearing Coat :-- Providing and laying Cement concrete wearing coat M-30 grade including reinforcement complete as per drawing and Technical Specifications 7.51 Cum
63 63 Providing and laying of a strip seal expansion joint catering to maximum horizontal movement upto 70 mm, complete as per approved drawings and standard specifications to be installed by the manufacturer/supplier or their authorised representative ensuring compliance to the manufacturer's instructions for installation. 6.76 m
64 64 FIRST YEAR 1 Rs.
65 65 SECOND YEAR 1 Rs.
66 66 THIRD YEAR 1 Rs.
67 67 FORTH YEAR 1 Rs.
68 68 FIFTH YEAR 1 Rs.
69 69 ADD FOR LABOUR CESS @ 1% 1 RS.
70 70 ADD FOR GST @ 12% 1 RS.
71 71 ADD SEIGNIORAGE FEE 1 RS.
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail