}

High Performance Thin Layer Chromatography System ( Hptlc ), KFRI, Peechi-Kerala

Kerala State Council For Science Technology And Environment-KSCSTE has published High Performance Thin Layer Chromatography System ( Hptlc ). Submission Date for this Tender is 27-01-2021. High Pressure Liquid Chromatograph Tenders in KFRI, Peechi Kerala. Bidders can get complete Tender details and download the document.




Tender Notice

26575199
High Performance Thin Layer Chromatography System ( Hptlc )
Open Tender
Indian
Kerala
KFRI, Peechi
27-01-2021

Tender Details

Supply Of High Performance Thin Layer Chromatography System ( Hptlc )

Key Value

Document Fees
INR 7500 /-
EMD
INR 50000.0 /-
Tender Value
Refer document

BOQ Items

Name of Work: Supply of High Performance Thin Layer Chromatography System (HPTLC)
Sl. No. Item Description Item Code / Make Quantity Units
1 1 High Performance Thin Layer Chromatography System (HPTLC) BI01010001010000000000000515BI0100001112
2 1.01 Technical Specifications\n\nI. Sample application\nI.A. Sample applicator – For applying sample to TLC plates \nAutomatic/semi-automatic Spot and band application – Software controlled with method storage facility\nModes for sample application: Different modes should available for sample application based on the requirement as given below\n1) Quantitative analysis \n2) Micro-preparative chromatography (minimum 180mm band length & 500µl sample in one go) \n3) Superimpose – Internal standard or derivatization reagent in same method \n4) In – situ clean-up (sample application at 110mm on y axis). \nSample volumes – Max up to 500 µl \nSample position selection – Both on X & Y axis \nRate of sample dispensing - Automatic \nI.B. Sample syringes – 100µl - 2 Nos \n 500µl - 2 Nos \nI.C. Nitrogen Cylinder with regulator - 1 each\n\nII. Development\nII.A. Development chambers – 3 Nos for 3 sizes of plates \n- 20x20 cm, 20x10 cm and 10 x 10 cm)\nOne-piece joint less moulded glass bubble free chambers\nBottom divided into two equal halves with a sloping divider (Twin Trough).\nStainless steel rust proof lid completely seals the chamber\nII.B. Solvent front monitoring device\nTo alertwith audible alarm& visually that the mobile phase has reached the desired developing distance during chromatogram development.\nCompatible with Development chambers 20 x 20 cm, 20 x 10 cm, 10 x 10 cm.\nII.C. TLC/HPTLC Plate Heater \n Scratch and break free ceramic surface\n Heating area – minimum 20 x 20 cm\n Grid for positioning TLC plats\n Temperature range: 25-200OC\n Digital Temperature display\n Over heat protection \nII.D. Manual Derivatization chamber\nDip tank (sintered sheet glass) with lid\nSize 20 x 20 cm \nII.E. Automatic Reagent Sprayer - Pneumatic cordless TLC sprayer with rechargeable batteries and produce non-clogging fine uniform spray. \nIII. Documentation\nIII.A. TLC Visualizer -PROFESSIONAL PHOTODOCUMENTATION SYSTEM\nIllumination unit with UV254 and UV366 epi-UV and White light both epi and transilluminator \nCamera:48-bit RGB digital CCD sensor industrial camera with 12 mm lens.\nSuited for object formats up 20x20 cm TLC plates.\nCamera head built in IR & UV filters. \nFixed focus \nTrue colours capture and high-quality images \nVery linear response Camera controlled only by s/w.\nAutomatic software control of illumination and camera. \nViewing window for plates inside hood \nBuilt in slider to accommodatedifferent plate sizes. \nCover for Camera head. \n Flicker less illumination\n \nVisualizer Software requirements\nAutomatic image capturing up to 120 sequences. \nAutomatic image optimization \nAutomatic exposure time to suit brightest zone withindynamic range of CCD. \nFull function annotation. \nRf scale. \nSpot application tool detects smallest fractions. \nHigh speed data transfer.\nNoise reduction facility. \nFully GLP compliant. \nOptions for 21 CFR 11 compliance & IQ-OQ.\n\nIII.B. Computer controlled Scanner/Densitometer \nAutomatic spectrum scanning for identification and purity check. \nAutomatic quantitative measurement by absorbance & fluorescence. \nOptions for different plate sizes \nScan speed 100 mm/sec @ 25 um resolution,\nWavelength range 190-900 nm. \nSpectrum scan speed 100 nm/sec. \nMax 999 spectra/plate. \nData sampling rate - 4000/sec. \nDeuterium, mercury, W lamps self-diagnostic and Service dialog\nBuilt-in Universal filter for fluorescence \nVariable scan slit size \nMinimum two bandwidth options - 5& 20nm. \nMulti-wave length scanning above 30 wavelengths with storing and plotting\nAuto calculation at ? in Multi-wave length scanning.\n\nScanner Software requirements\n64 bit software, \nAutomatic/Manual data integration, \nAuto baseline correction. \nSpot check facility. \n3D display with data storage. \nVariable Calibration options - single level, multilevel, linear/non-linear. \nOptions for statistics evaluation\nReproducibility check facility. \nAuto calculation of data from wts and dil. factors \nLamp use tracking. \nGLP compliant \n\nIV. Software’s : Software upgradations should be free of cost\n\nIV.A. HPTLC system manager software\nAccess and control of electronic instruments viz. applicator, Scanner and Photo-documentation. \nServer - client access. \nIncluding downloadable HPTLC method libraries above 250 herbal analysis methods from United States Pharmacopeia (USP) /European Pharmacopoeia (PhEur)\nSearch options with text and date, samples, methods and analysis files.\nSecure data handling data security and Auto back up facility.\ncGLP compliant. \n\nIV.B. Visualizer \nImage enhancement tool, \nHigh-dynamic-range imaging (HDRI) \nComparison Viewer\n\nIV.C. Scanner Package software\nMulti Wavelength Feature, \nSpectrum Scanning \nQuantification options,\n\nV. Adapters(USB-RS 232, 4 Port) \n\nVI. Branded compatible desktop Computersystem\nFor complete HPTLC system and software’s\n\nVII. LaserJet Printer\n\nVIII. Comprehensive maintenance contract -5 year with preventative maintenance kits \n\nGeneral conditions: - \n\n1. The system should be complete functional unit in terms of hardware and software to demonstrate the intended specifications and applications to be supplied with all necessary ancillaries.\n2. Specifications should be confirmed from the Technical Brochure and website of the manufacturer. \n3. Good Service and Technical support are essential. Please provide testimonials form three reputed customers. \n4. Training:2 levels – 5 days during installation in our lab and subsequently at supplier’s application lab for 2 persons at suppliers’ cost, two times in a duration of 5 years. \n5. A compliance statement of the specifications should be provided along with the quote before placing order.\n6. The list of installations and users of complete system in India & abroad should be provided for reference. The company must have at least five working installations of complete system (HPTLC) globally. User list for this period, current contact details of users, Supply Orders and certificates of successful completion issued by the clients must be enclosed.\n7. Installation, calibration, standardization and commissioning shall be the responsibility of the vendor.\n8. Pre-installation requirements, including requirement for water/power supply, should be enclosed along with the tender.\n BI01010001010000000000000515BI0100001113 1 Nos
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail