}

Outsourcing And Maintenance Of Swimming Pool At Vsn Nagpur, GE AF NAGPUR-Maharashtra

Military Engineer Services-MES has published Outsourcing And Maintenance Of Swimming Pool At Vsn Nagpur. Submission Date for this Tender is 04-02-2021. Swimming Pool Construction Tenders in GE AF NAGPUR Maharashtra. Bidders can get complete Tender details and download the document.




Tender Notice

26550027
Corrigendum : Outsourcing And Maintenance Of Swimming Pool At Vsn Nagpur
Open Tender
Indian
Maharashtra
GE AF NAGPUR
04-02-2021

Tender Details

Outsourcing And Maintenance Of Swimming Pool At Vsn Nagpur

Corrigendum Details

Sr No CorrigendumDate Corrignedum CorrigendumType NewSubmissionDate
1 21-Jan-2021 Corrigendum No 1 BOQ 28-01-2021
2 28-Jan-2021 Bid Auto Extn Corrigendum Bid Auto Extn Corrigendum 04-02-2021

Key Value

Document Fees
INR 500 /-
EMD
INR 30000.0 /-
Tender Value
Refer document

BOQ Items

Name of Work: OUT SOURCING AND MAINTENANCE OF SWIMMING POOL AT VSN NAGPUR
Sl. No. Item Description Item Code / Make Quantity Units
1 1 Out Sourcing and maintenance of swimming pool (Size25mx13.5m) including filtration plant,LT control panel etc. at command swimming pool , diving pool and baby pool daily with one operator (skilled) continuous Eight hours in two shift a day (first shift i.e. 0600 hrs to 1400 hr) second shift i.e.(1400 hrs to 2200 hrs) including Sundays and Closed Holidays and making arrangements for reliever.The operator shall properly record the log book and cleaning of installation including toilet which is the responsibility of the contractor all as specified . 330 Each Day
2 1.01 Note: Log Book, Log Sheet & Chemical Consumption records shall be in contractor scope & testing of water through reputed/NABL Lab and the same shall be produced & recorded by department & needs to be approved by Engineer-in-charge on quarterly basis.(Contractor will provide chlorine testing kit and OT solution for testing of water and cost of the same shall be deemed to be included in the quoted rate of the respective item.
3 2 Testing of potable water sample collected from Vayusena Nagar Nagpur swimming pool and testing report required through reputed laboratory as per BIS - 10500-2012 for drinking water of following tests: -\n(i) Tempetature (ii) Turbidity (iii) Colour (iv) Total hardness \n (v) Calcium (vi) Magnesium (vii) Total Alkalinity (viii) Chloride\n (ix) Total disolved solids (x) Flouride. COD , BOD 5 Each Job
4 3 Supply Supply and make liquid form and pore to dosing plant of Bleaching powder Note: Mixing & dosing will be in Contractor scope as directed. 350 KG
5 4 Supply only copper sulphate (BLUE STONE) CuSO4 Note: Mixing & dosing will be in Contractor scope as directed 200 KG
6 5 Supply and make liquid form and pore to dosing plant alum(AL2O3) superior grade with aluminium percentage not less than 17% insolube matter percentage maximum 0.30 % Ph of 5% solution should not be less than 2.80 and iron percentage by maximum 0.01% Note: Mixing & dosing will be in Contractor scope as directed 400 KG
7 6 Material and labour for cleaning of swimming pool (size 25mx13.5m) by cleaning entire internal surface by removing dirt, sludge etc with wire brush by applying bleaching power and fresh water and clean entire surface repeatedly with fresh water and draining out soiled water including using pressure jet pump and suction pump capacity of pool surface complete in all in as specified and directed.using acid and other suitable methods before filling as required at site all as specified and directed by Engineer-In-Charge for the following Note -Quoted rates shall include for filling the swimming pool with water and de-watering as per requirement the water supply provided by department. 1 Each JOB
8 7 Material and labour for cleaning of level tank for swimming pool using acid and other suitable methods before filling as required at site all as specified and directed by Engineer-In-Charge for the following Note -Quoted rates shall include for filling the level tank for pool with water and de-watering as per the water supply provided by department. 1 Each JOB
9 8 Material and labour for cleaning of Baby pool tank for swimming pool using acid and other suitable methods before filling as required at site all as specified and directed by Engineer-In-Charge for the following Note -Quoted rates shall include for filling the level tank for pool with water and de-watering as per the water supply provided by department. 1 Each JOB
10 9 M&L for opening pump set split case centrifugal type 3 of capacity 15 HP, make Kirloskar make from motor coupling after isolating the electric and earth lead connections opening the pump set for repair/overhauling & proper alignment of shaft etc including replacing the items with new items given vide item No 09 below, reassemblying the pumpset greasing connecting, testing and commissioning complete including necessary Lathe works all as specified at Swimming Pool 2 Job
11 10 Supply only spare parts for pump set for fixing against item No.8 follows:-
12 10.01 a) pump shaft sleeve made out of gun metal 2 Each
13 10.02 b) key for main shaft/impeller 2 Each
14 10.03 c) check nut for pump set shaft 2 Each
15 10.04 d) stuffing box bush 1 Each
16 10.05 e) motor pump coupling complete with nut, bolts etc 2 Each
17 10.06 f) water seal 4 Each
18 10.07 g) stuffing box packing 2 Each
19 10.08 h) rubber tyre coupling complete make Fenner/Unique/Unimac 2 Each
20 10.09 i) pump set bearing housing 1 Each
21 10.1 j) pump Shaft 1 Each
22 10.11 k) ball/roller bearing complete 4 Each
23 10.12 l) Air relase valve 1 Each
24 11 Taking down electric motor 15 KW 415 volt coupled to pump after disconnecting the electrical connection, and earth connections from its foundation and transportation to work shop , checking the serviceability of ball bearing gboth side of motor , greasing of bearing up to free rotation of shaft of motor complete, greasing on reassemblying the motor to reinstallation on foundation, reconnecting back the cable and earth connections etc complete in all respect and starting the pump all as directed.\n 2 Each
25 12 M & L for Rewinding of pump motor 415 Volt 3 phase after disconnecting electric cable and eath lead, suction and delivery pipes, shifting to work shop, dismantling the motor assembly and removing the burnt out copper winding of stator and cleaning the stator slots and core assembly, rewinding to stator with suitable gauge super enamelled copper wire with insulating papers and insulation cloths, varnishing the winding and baking heating for achieving the required insulation resistance, re-assembling the motor and testing complete, incl transporting back to site and fixing motor to its original place, reconnecting electric cable and earth leads etc testing and commissioning complete in all respect all as specified and as directed for capacity: 15 KW Motor 1 Each
26 13 M & L for Rewinding of pump motor 415 Volt 3 phase after disconnecting electric cable and eath lead, suction and delivery pipes, shifting to work shop, dismantling the motor assembly and removing the burnt out copper winding of stator and cleaning the stator slots and core assembly, rewinding to stator super enamelled copper wire with insulating papers and insulation cloths, varnishing the winding and baking heating for achieving the required insulation resistance, re-assembling the motor and testing complete, incl transporting back to site and fixing motor to its original place, reconnecting electric cable and earth leads etc testing and commissioning complete in all respect all as specified and as directed by Engr-in-charge for the following capacity: 01 hp Motor 2 Each
27 14 M&L for opening Suction Sweeper having discharge of 2 LPS of 20 Mtr. head complete with suction head, brush, flexible hose pipe & maninal pulling rope, suction pipe with inlet valve, nozzles including electrical connections. isolating the electric and earth lead connections opening the suction sweeper set for repair/overhauling & proper alignment etc including replacing the items with new items given vide item below, reassemblying the suction sweeper greasing connecting, testing and commissioning complete including necessary works all as specified at Swimming pool 1 Job
28 15 Supply only spare parts for pump set for fixing against item No.13 above.
29 15.01 (a) Pump Bearing 1 Each
30 15.02 (b) Pump Shaft Sleev, Gland Packng & Oil Seal 1 Each
31 15.03 (c) shaft 1 Each
32 16 Supply only flexible pipe 1/2 inchs dia for priming to pump 60 RM
33 17 Taking out unserviceable & Supply and fix CI body foot valve ISI marked of size 150 dia complete with nuts,bolts,rubber gaskets etc including ,testing all as specified 2 Each
34 18 Taking out unserviceable butter fly valve of size 150 mm bore and supply and fix new butter fly valve wafer type in CI Body with integrally moulded liner of nitrile or EPDM stainless steel Disc & stem, Liver operated as per IS 13095 in PN 1.0 in including jointing material such as rubber gasket,bolts,nuts,etc direct integrally all as specified and as directed by Eng-in-Charge Make: Kirloskar/ISI MARK or kARTAR , 2 EACH
35 19 Taking out unserviceable butter fly valve of size 100 mm bore and supply and fix new butter fly valve wafer type in CI Body with integrally moulded liner of nitrile or EPDM stainless steel Disc & stem, Liver operated as per IS 13095 in PN 1.0 in including jointing material such as rubber gasket,bolts,nuts,etc direct integrally all as specified and as directed by Eng-in-Charge Make: Kirloskar/ISI MARK or kARTAR , 1 EACH
36 20 Supply only filter media sand 16/32" Mesh size 3000 Kgs
37 21 Supply only filter media sand 1/8" Mesh size 600 Kgs
38 22 Supply only filter media sand 1/4" Mesh size 650 Kgs
39 23 Supply only filter media sand 1/2" Mesh size 750 Kgs
40 24 Supply only 1-1.5" Gravel 'for filter media 2000 Kgs
41 25 (i) Servicing of existing filters and opening of manholes of pressure Sand filters & provide open back wash for dirt removal, Removal of complete media from pressure sand filter and refilling of filter media in filters with given item above No 20 to 24 \n(ii) Inspection of internal strainers, closing of main holes, servicing of inlet.outlet , backwash , & air release diaphragm valve \n(iii) Testing trail run for pressure sand filter\n(iv) Testing of water sample through reputed laboratory for inlet & out let water \n(v) Supply for cleaning chemical as per OEM recommendation for cleaning of existing sand filters\nThe rate quoted shall be deemed to include the cost of material & labour for item No 25 (i) to 25 (v) 2 Job
42 26 Supply and fix Jeep leather 150 mm suitable for CI foot valve including nut bolts washer rate included for removing and refixing foot valve in to the pipe in sump make ISI MARK 4 Each
43 27 Taking out unservicable cable of size 2.5 sqmm and Supply and fix flexible flate submersiblrcable 2.5 sqmm 3core PVC insulated and sheathed submersible type with stranded copper conductore 50 RM
44 28 Taking out unservicable & S & F MCCB 3 pole 100 amps breaking capacity 25 Ka, 415 volts, 50 Hz including necessary incoming and out going electric connection with suitable size of copper lugs etc. Make : Legrand / Hager, L&T. 1 Each
45 29 Taking down U/S & M&L switch fuse unit rated current capacity 63 amps with 32 amp hrc fuses 4 pole with advance system and with on off indication accessories 1 Each
46 30 Taking down U/S & M&L switch fuse unit rated current capacity 32 amps with 6 amp hrc fuses 4 pole with advance system and with on off indication accessories 1 Each
47 31 M&L Chlorine test kit with coloured ample complete with all testing \nfitments and OT solution in Rexene finished box Note Sample avaiable in AGE E/M office 1 Each
48 32 Supply & fix HDPE tank of 50 ltr HDPE Hypochlorite dosing tank with 50 ltr hypo solution (NAOCL), 4 Each
49 33 Dismantling of soda ash / copper sulphate solution preparation tank with agitator 1 hp high speed motor and dozing pump complete 3 phase 415 V from base plate after the electric onnections, suction and delivery pipes etc opening the pump set, motor rotor and stator etc for repair/overhauling and warnishing and baking the stator winding to enhance the insulation level including replacing the unserviceable parts with new items and reassemblying the motor/ pumpset and reinstalling on foundation frame connecting, testing and commissioning complete all as specified. 3 Each
50 34 Taking out U/S and S&F Power contactor 3 pole 415 V AC type MNX 50, Make : L&T Cat No . ST19001 or equivalent in Siemens, C&S. 1 EACH
51 35 Taking out U/S S&F electronic timer type ET 100 with time range 0 to 60 seconds, 360 Volt Make : L&T Cat No SE92003 or equivalent in Siemens, C&S. 1 Each
52 36 Supply and fill in to the connected plant after making in liquid form of granual of Trichloroisocyanuric Acid (90%) (C3CI3N303) Chlorine Granuals (90%) Size 5-8 Mesh Appearance : White Granuals Ef pH : 2.7 to 3.3fective Chlorine : 90% NOTE Rate deemed to be included labour and material of chemical 600 kg
53 37 Supply and fix MS ERW pipe nominal dia 150 mm as per IS 3589 (1981) , including special joints complete for delivery and side including necessary nuts bolts and rubber etc, all as specified and directed. 12 RM
54 38 Painting work:\nPainting of Installed Machineries at Swmming Pool Pump House : by scrapping existing paint and spraying one coat of synthetic enamel paint for follwing items with using Asian/Berger paint manufacturer all as directed\nPump Set :- 02 Nos.\nPressure Filter :- 02 Nos.\nDosing Pumps :- 03 Nos. including dosing tanks\nSuction Sweeper :- 01 No. 1 Job
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail