}

Fabrication , Transportation And Erection Of Gate And Hoisting System Of Escape At Rd 210M Of Darpani Branch Canal Of Right Bank Canal Of Rengali Irrigation Project Under Rengali Right Canal Division No-Iii , Khuntuni . , DARPANI, KHUNTUNI-Odisha

Water Resources Department-WRD has published Fabrication , Transportation And Erection Of Gate And Hoisting System Of Escape At Rd 210M Of Darpani Branch Canal Of Right Bank Canal Of Rengali Irrigation Project Under Rengali Right Canal Division No-Iii , Khuntuni . . Submission Date for this Tender is 18-01-2021. Irrigation Work Tenders in DARPANI, KHUNTUNI Odisha. Bidders can get complete Tender details and download the document.




Tender Notice

26533886
Fabrication , Transportation And Erection Of Gate And Hoisting System Of Escape At Rd 210M Of Darpani Branch Canal Of Right Bank Canal Of Rengali Irrigation Project Under Rengali Right Canal Division No-Iii , Khuntuni .
Open Tender
Indian
Odisha
DARPANI, KHUNTUNI
18-01-2021

Tender Details

Fabrication , Transportation And Erection Of Gate And Hoisting System Of Escape At Rd 210M Of Darpani Branch Canal Of Right Bank Canal Of Rengali Irrigation Project Under Rengali Right Canal Division No-Iii , Khuntuni .

Key Value

Document Fees
INR 4000 /-
EMD
INR 8307.0 /-
Tender Value
Refer document

BOQ Items

Name of Work:-Fabrication, Transportation & Erection of Gate & Hoisting system of Escape at RD 210m of Darpani Branch Canal of Right Bank Canal of Rengali Irrigation Project under Rengali Right Canal Division No-III, Khuntuni.
Sl. No. Item Description Item Code / Make Quantity Units
1 1 Supply of structural steel materials of different section and sizes (IS:2062), stainless steel flats of different section and sizes (04 Cr 19 Ni of IS :1570 (Part-5), fabrication including machining and assembly of second stage embedded parts consisting of sill beam, side seal SS seat,SS track ,wall liner and gate consisting of skin plate, horizontal girder,end vertical girder , lifting bracket, seal seat, seal flats, diaphrgm etc., Single stem worm & worm wheel hoisting arrangements consisting of , base plate, ladder, supporting beam, cross beam, anchor bar,chequered plate etc. of total weight about 2.523 MT for 2 Nos. of gates (size-2000 x 3475) mm as per specification and approved drawings with all accessories including machinery, fixtures, labour, cutting, welding, drilling, boring, cleaning, finishing, consumables with lead & lifts all complete as per instruction of Engineer-in-charge. BI01010001010000000000000515BI0100001112 1 Set
2 2 Supply of following Boughtout materials for 2 nos of gates:\n Nut, bolt, stud and washer etc. 92.4 kg, Bronzepad 8 nos, Anchor bar-32 nos, Lifting Pin dia 60 mm & length 170 mm material-45 C8 of IS:1570 (part-II) 2 nos, Bottom Rubber seal 4.753 m, Ø32 Side seal 9.505 m, worm & worm gear set R4/39/8/8.5-200mm- 2 set of IS:3734 material:cast steel worm gear, 55C8 worm & shaft phosphorous bronze nut suitably square threaded all including cost of material, machining etc., Ø80mm screw rod with square thread 4m- 2 nos, Ø80mm screw rod with square thread 1.275m- 2 nos, 51220 SKF or equivalent bearing- 4 nos, operating handle 2 nos, grease MP-3 & gearoil 20 kg, stainless steel flat 213.19 kg, stainless steel electrode 938 nos, Bronze bush for worm shaft having OD- 45mm and ID-35mm, collar size Ø 70 x 6 mm total length 45 mm material LTB-1 of IS:318- 2set and Ø80/Ø40 mm- 84mm long hub 2 nos as per specification and approved drawings with all accessories complete as per instruction of Engineer-in-charge. BI01010001010000000000000515BI0100001113 1 Set
3 3 Erection, positioning, alligning, fixing, trial, commissioning, testing etc. of second stage embedded parts consisting of sill beam, side seal, track , guide etc., gate consisting of skin plate , horizontal girder,end vertical girder, seal flats etc., single stem worm gear box hoisting arrangements consisting of hoist bridge, single stem worm gear box, supporting beams, cross beam base plate, fixing of anchor bolts, laying of chequered plate etc. of total weight about 2.523 MT for 2 Nos. of gates as per specification with all accessories including machinery, fixtures, labour, cutting, welding, drilling, boring, cleaning, finishing, consumables with lead & lifts, concrete cutting and 2nd stage concreting as per requirement, transportation charges with labour charges for loading and unloading all complete as per instruction of Engineer-in-charge. BI01010001010000000000000515BI0100001114 1 Set
4 4 Painting of 2nd stage embedded parts (exposed portion) ,sluice gate and its components in both upstream side and downstream side including cleaning, degreasing, handling, cost of paint, applying of one coat Zinc primer of 40micron thick and three coats of coal tar epoxy paint of 100 micron each, of approximately 2.523 MT for 2 Nos. of gates all inclusive of labour, materials and consumables as per relevant IS Code specifications with all lead & lifts as per instruction of Engineer-In-Charge. BI01010001010000000000000515BI0100001115 1 Set
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail