}

Construction Of Chiplay Surface Flow Minor Irrigation Scheme ( Sfmi ) At G . P-Samsing . , Block- Garubathan In District Kalimpong Under Dpmu , Derjeeling , Wbadmi Project, G.P-Samsing., Block- Garubathan-West Bengal

Water Resources Department-WRD has published Construction Of Chiplay Surface Flow Minor Irrigation Scheme ( Sfmi ) At G . P-Samsing . , Block- Garubathan In District Kalimpong Under Dpmu , Derjeeling , Wbadmi Project. Submission Date for this Tender is 29-01-2021. Irrigation Work Tenders in G.P-Samsing., Block- Garubathan West Bengal. Bidders can get complete Tender details and download the document.




Tender Notice

26531702
Construction Of Chiplay Surface Flow Minor Irrigation Scheme ( Sfmi ) At G . P-Samsing . , Block- Garubathan In District Kalimpong Under Dpmu , Derjeeling , Wbadmi Project
Open Tender
Indian
West Bengal
G.P-Samsing., Block- Garubathan
29-01-2021

Tender Details

Construction Of Chiplay Surface Flow Minor Irrigation Scheme ( Sfmi ) At G . P-Samsing . , Block- Garubathan In District Kalimpong Under Dpmu , Derjeeling , Wbadmi Project

Key Value

Document Fees
Refer document
EMD
INR 70000.0 /-
Tender Value
Refer document

BOQ Items

Name of Work: Constraction of Chiplay Surface Flow Minor Irrigation Scheme (SFMI) at G.P-Samsing., Block- Garubathan in District Kalimpong under DPMU,Derjeeling, WBADMI Project
Sl. No. Item Description Item Code / Make Quantity Units
1 1 CONSTRUCTION OF R.C.C. PRIMARY INTAKE TANK, SILTATION TANK, RESERVOIR TANK, DISTRIBUTION TANK, RCC COLUMN, CC STEP & GUARD WALL etc.
2 1.01 Surface Dressing of the ground in any kind of soil including removing vegetation inequalities not exceeding 15 cm depth and disposal of the rubbish within a lead upto 75 m as directed.\n(b) Removal of spoils within a lead of 50 m. 62 m2
3 1.02 Excavation in Hard Rock (blasting prohibited) Excavation for roadway in hard rock (blastingprohibited) with rock breakers including breakingrock, loading in tippers and disposal within all lifts andlead upto 1000 metres, trimming bottom and sideslopes in accordance with requirements of lines,grades and cross sections as per Clause 301 of Specifications for Road & Bridge Works of MoRT&H (5th Revision). \n(Mode of measurement: pre works and post works) 69 m3
4 1.03 Earth work in excavation of foundation trenches or drains in all sorts of soil (including mixed soil but excluding laterite or sandstone) including removing,spreading or stacking the spoils within a lead of 75m.as directed. The item includes necessary trimming the sides of trenches, levelling, dressing and ramming the bottom, bailing out water as required complete.\nDepth of excavation not exceeding 1500 mm.\nPlinth wall. 34.09 m3
5 1.04 Boulder soling in foundation of walls, or source, channels, pillars including supply of hard stones to worksite & laid properly in lev el as directed ramming filling interstices with stone pieces, all complete with tip blending of sand or earth as per direction of E - I - C all complete. ( Rate analysis enclosed ).\nPlinth wall 76.604 m2
6 1.05 Cement concrete with graded stone ballast (40 mm size) excluding shuttering.\n(B) In ground floor.\na) 1:3:6 proportion\nPlinth wall 17.054 m3
7 1.06 Rubble masonry in cement (6:1) with hard dressed stones from approved quarries and clean,coares and washed sand including carriage of all materials to site.\nii) In Road and Jhora work\nPlinth wall 8.18 m3
8 1.07 Ordinary cement concrete M-20 (mix 3:1.5:1) with graded stone chips (20 mm down) excluding shuttring and reinforcement, if any, in ground floor as per IS-456-2000.\nRiver bazree\n 36.145 m3
9 1.08 Hire and labour charge for shuttering with centreing and necessary staging upto 4 m. using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, columns, lintels curved or staight including fitting fixing and striking out after complection of works. (upto roof of ground floor)\na) 25 mm. to 30 mm. thick wooden shuttering.\n 330.773 m2
10 1.09 Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc. including supply of rods, initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at inter-section, complete as per drawing and direction.\na) For works in foundation, basement and upto roof of ground floor/upto 4m.\ni) Tor steel / Mild steel (SAIL/TATA/RINL)\n\n 2.28 MT
11 1.1 Plaster ( to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering conrners as directed and raking out joints or roughening of concrete surface, including throating, nosing and drip course where necessary (ground floor).\n(ii) With 4:1 cement mortar \na) 20 mm. thick plaster\n 189.437 m2
12 1.11 Neat cement punning about 1.5 mm. thick in wall, dado, window, sills, floor, drain etc. 189.09 m2
13 1.12 Construction of display board made with 250mm thick 1st class brick work in cement mortar (4:1) of size 1500mm x 1200mm,foundation consisting of 150mm thick sand filling below the jhama brick flat soling,13mm thick(4:1) both side cement plaster up to G.L,painting with best quality synthetic enamel paint of approved make & brand including painting block letters & digits(Size above 4 cm & up to 5cm) with black japan or any approved paint as per direction of E.I.C in accordance with supplied specific approved drawing including necessary earth work in excavation in all sorts of soil,filling in foundation with earth in all respect with all costs of labour and materials. 1 No
14 1.13 Labour charges for each addl. carriage of 50 m by head load (or part threreof) beyond the initial 100 m at loading or unloading points.\na) Cement 14.1 MT
15 1.14 Labour charges for each addl. carriage of 50 m by head load (or part threreof) beyond the initial 100 m at loading or unloading points.\nb) Steel materials 1.25 MT
16 2 CONSTRUCTION OF SAUSAGE WORK
17 2.01 Making rectangular sausage cage with 10 SWG galvanized iron wire of 125mmX125mm mesh wire netting with proper lapping of minimum 150mmincluding sewing the joints with 12 SWG G I wire and supply of all materials and equipments including placing the sausage cage in position, filling the same with boulder or lump agreegates complete as per direction of the engineer-in-Charge but excluding the cost of boulder / lump aggregate sand its carriage upto site. ( Cost is excluding the cost of end pieces ).\na) 1.20 metre X 0.90 metre nominal section sausage wall. 10 Meter
18 2.02 Making rectangular sausage cage with 10 SWG galvanized iron wire of 125mmX125mm mesh wire netting with proper lapping of minimum 150mmincluding sewing the joints with 12 SWG G I wire and supply of all materials and equipments including placing the sausage cage in position, filling the same with boulder or lump agreegates complete as per direction of the engineer-in-Charge but excluding the cost of boulder / lump aggregate sand its carriage upto site. ( Cost is excluding the cost of end pieces ).\nb) 0.75 metre X 0.45 metre nominal section sausage wall. 20 Meter
19 2.03 Supplying, fitting, fixing end pieces for rectangular/square/circular sausage at the end, with 10 SWG/8 SWG GI wire net of different mesh sizes tying & sewing the same maintaning a lap langth of 150 mm all around with 12 SWG G I wire complete, including the cost of supply of wiernetting, fitting etc, complete as per direction of the Engineer-in-charge.\nb) Mesh size 125mm X 125mm with 10 SWG wire. 159.25 m2
20 2.04 Quarrying, carrying, supplying ston boulders/ shingles from the Engineer-in-charge selected quarrying site to the site of work including cost of material, loading,unloading, stacking and carriage including all incidentel chargeslike royality etc. complete as per direction of the Engineer-in-charge. ( Quarry bed belongs to non forest area )\nBoulder above 30 kg. each.\nSausage step. 15.043 m3
21 3 MAIN WATER TRANSMISSION SYSTEM
22 3.01 Supplying , fitting and fixing of G.M. Gate Valve/ Throttle Valve as per IS:778. a) G. M. Valve 3” or 80 mm. 4 Nos
23 3.02 Supply of 4" M.S. Flanged Adaptor for Gate Valve (IS:1538/1993) of approved make with bolt, nut and gasket complete. (1Set=2Nos.) including fitting complete as per direction of EIC. 3 Set
24 3.03 Supplying, fitting and fixing G.I. pipes of TATA make with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, making threads, fitting, fixing etc. complete in all respect including cost of all necessary fittings as required,jointing materials and two coats of painting with approved paint in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, specials. Payment for painting will be made seperately)
25 3.031 (ix) 80 mm dia. medium quality 920 Meter
26 3.032 (x) 100 mm dia. medium quality 930 Meter
27 3.033 (xi) 150 mm dia. medium quality 80 Meter
28 4 Add GST @12% 1 LS
29 5 Add Labour Welfare Cess @1% 1 LS
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail