}

Construction Of G-2 Barrack With Attached Bathroom Having Capacity Of 20-25Personal With Dining Cum Recreation Hall , Kitchen Store Etc At Police Station Diskit Nobra . , Nobra-Jammu And Kashmir

Public Works Department-PWD has published Construction Of G-2 Barrack With Attached Bathroom Having Capacity Of 20-25Personal With Dining Cum Recreation Hall , Kitchen Store Etc At Police Station Diskit Nobra . . Submission Date for this Tender is 28-01-2021. Barrack Tenders in Nobra Jammu And Kashmir. Bidders can get complete Tender details and download the document.




Tender Notice

26529081
Corrigendum : Construction Of G-2 Barrack With Attached Bathroom Having Capacity Of 20-25Personal With Dining Cum Recreation Hall , Kitchen Store Etc At Police Station Diskit Nobra .
Open Tender
Indian
Jammu And Kashmir
Nobra
28-01-2021

Tender Details

Construction Of G-2 Barrack With Attached Bathroom Having Capacity Of 20-25Personal With Dining Cum Recreation Hall , Kitchen Store Etc At Police Station Diskit Nobra .

Corrigendum Details

Sr No CorrigendumDate Corrignedum CorrigendumType NewSubmissionDate
1 11-Jan-2021 corrigendum NIT Other 28-01-2021

Key Value

Document Fees
INR 3500 /-
EMD
INR 270000.0 /-
Tender Value
INR 1.35 Crore /-

BOQ Items

Name of Work: Construction of G-2 Barrack with attached bathroom having capacity of 20-25personal with dining cum recreation hall, kitchen, store etc at police station Diskit Nobra.
Sl. No. Item Description Item Code / Make Quantity Units
1 1 Earth work in excavation by mechanical means (Hydraulic excavator) over areas (Exceeding 30cm indepth, 1.5mtr in width as well as 10sqm on plan) including disposal of excavated earth, lead upto 50m and lift upto 1.50 m, disposed earth to be levelled and neatly dressed. All kinds of soil 113.16 Cum
2 2 Dry stone pitching (any thickness) including cost of stones 39.7 Cum
3 3 Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering- All work upto plinth level. 1:4:8 (1 cement: 4 fine sand : 8 graded stone aggregate 40mm nominal size) (Nallah) 20.29 Cum
4 4 Reinforced cement concrete work in walls (anythickness) including attached pilasters, buttresses,plinth and string courses, fillets, columns, pillars,piers, abutmen"ts, posts ans sturts, etc. upto floor five level excluding cost of centring, shuttering,fmishing and reinforcement. 1:1.5:3 (1 cement : 1.5 coarse sand : 3graded crushed stone aggregate 20mm nominal size) 208.7 Cum
5 5 Reinforcement for R.C.C. work including straightening,cutting, bending, placing in position and binding all complete. 31317 Kg
6 6 Centering and shuttering including strutting , propping etc and emoval of form for. foundation : footings, bases of columns etc for mass concrete. 87.12 Sqm
7 7 Lintels, beams, plinth beams, girders,\nbressumers and centilevers. 314.88 Sqm
8 8 Suspended floors, roofs, landings, balconies and access platform. 618.95 Sqm
9 9 Columns, Pillars, Piers, Abutments, Posts and Struts 260.86 Sqm
10 10 Edges of slabs and breaks in floors and walls. Under 20cms wide 79.16 Rm
11 11 Filling available excavated earth(excluding rock) in trenches,plinth,sides of foundation etc.Layers not exceeding 20cm in depth,consolidating each deposited layer by ramming and watering lead upto 50m and lift upto 1.5m 45.26 Cum
12 12 Earth work in rough excavation,banking excavated earth in layers not exceeding 20 cm in depth,breaking clods,watering, rolling each layer with half tonne roller or wooden or steel rammers, and rolling every third and top -most layer with power roller of minimun 8 tonnes and dressing up in embankments for roads, flood banks, marginal banks and guide banks or tilling up ground depressionslead upto 50 mtr and lift upto 1.5 mtr. in.All kinds of soil. 82.08 Cum
13 13 Random Rubble masonry with hard stone from nallah infoundation and plinth including levelling up with cement concrete1:6:12 (1 Cement: 6 coarse sand:12 graded stone aggregate\n20mm nominal size) at plinth level with cement mortar 1:6 (1 Cement: 6 coarse sand) 33.1 Cum
14 14 Providing and constructioncement stablized Mud Block masonry Mud Block made out of soil containing 60% to 70% of Sand 10% of Cly 5% ofcement pressed using manual machine in cement mortor 1:4 in wal. The size of block is 305X143X100mm laid in coarse cement mortor as per the direction of Engineer-in-charge. Including carriage Complete Job. 219.8 Cum
15 15 Providing and fixing upto floor five level precast cement concrete solid blocks including hoisting and setting inposition with cement mortar 1:3 (1 cement :3 coarsesand), cost of required centring, shuttering and complete.1:3:6 (1 cement:3coarse sand: 6 graded stone aggregate 20mm nominal size) (Crushed) 49.45 Cum
16 16 Providing wood work in frames of doors, windows,clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dashfasteners shall be paid for separately)Budloo wood. 5.85 Cum
17 17 Providing and fixing panelled or panelled and glazedshutters for doors,windows and clerestory windows including lSI marked M.S.pressed Butt hinges bright finished of required size with necessary screws excluding panelling which will be paid for separately,all complete as per direction of engineer- in charge. First class kail wood 35mm thick. 22.76 Sqm
18 18 12 mm thick prelaminated particle board (decorative lamination on both sides) grade-1, medium density flat pressed, three layer particle board FPT-1 or graded wood particle board FPT-1 , conforming to IS : 3087 marked bonded with BWP type synthetic resin adhesive as per IS : 848 and prelamination conforming to IS : 12823 Grade-1, Type II. marked. 34.14 Sqm
19 19 Providing and fixing glazed shutters for doors, windows and clerestory windows using 10kg/sqm (4mm thick) float glass panes including lSI marked M.S. pressed butt· \nhinf!eS bright finished of required size with necessary screws. First class kail wood 224.29 Sqm
20 20 Renewing glass panes, with wooden fillets wherever necessary. Glass panes weighing 10 kg /sqm 336.44 Sqm
21 21 Providing and fixing Ladakhi Ornamental Shingstak 2 feet height. 52 Rft
22 22 French spirit polishing with Two or more coats on new works including a coat of wood filler. 469.84 Sqm
23 23 Providing and fixing aluminium work for doors, windows,ventilators and partitions with extruded built up standard tubular sections/appropriate Z. sections and other sections of approved make conforming to IS : 733 and IS:1285, fixed with dash fastener of required dia. and size including necessary filling up of gaps at junctions i.e, at top, bottom and sides with required EPDM rubber I neoprene gasket felt etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle,Aluminium snap beading for glazing I panelling, C.P. brass I stainless steel screws, all complete as per architectural drawings and the directions of Engineer-inCharge (glazing, panelling and dash fasteners to be paid for separately) Powder coated aluminium (minimum thckness of powder coated 50 microns) 223.29 Kg
24 24 Providing and fixing 12mm thick prelaminated particle boardflat pressed three layer or graded wood particle board (conforming to IS: 12823 Grade-l type-11) in panelling fixed in aluminium doors, windows shutters and partition frames with C. P. brass I stainless steel screws etc.complete as per architectural drawings and directions of engineer-in-charge.Pre-laminated particle board with decorative lamination on both sides. 8.82 Sqm
25 25 Providing and fixing glazing in aluminium door, window,ventilator shutters and partitions etc. with EPDM rubber/neoprene gasket etc. complete as per the architecturaldrawings and the directions of engineer-in-charge. (Cost\nof aluminium snap beading shall be paid in basic item.) With floating glass panes of 4.0 mm thickness (weight not less than 10.00 kg/sqm) 59.06 sqm
26 26 15mm Cement plaster on the rough side of single or half brick wall of mix: 1 : 4 ( 1 cement : 4 fine sand) 1958.69 Sqm
27 27 Providing and applying white cement based putty of average thickness 2 mm, of approved brand and manufacture, over the plastered wall surface to preparethe surface even and smooth complete. 1678 Sqm
28 28 Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade New work (two or more coats) over and in-eluding priming coat with cement primer 1678 Sqm
29 29 Finishing walls with water proofing cement paint of required shade New work (two or more coats) applied @3.84 kg/10sqm 731.24 Sqm
30 30 Providing and fixing Ceramic gla.z:ed floor tiles 300x300mm (thickness to be specified by the manufacturers) of 1st quality conforming to IS: 13755 of NITC.O, ORIENT,SOMANY, KAJARIA or equivalent make in colour such as White, Ivory, Grey, Fume Red, Brown laid on 20 mm thick bed of Cement Mortar 1: 4 ( 1 cement : 4 coa.rse sand) including pointing the joints with white cement and matching pigment etc., complete. 210 Sqm
31 31 Providing and fixing thermal insulation with Resin Bonded Fibre glass wool conforming to IS: 8183 having density 24 kg/m3, 50 mm thick, wrapped in 200GVirgin Polythene Bags fixed to wall with screw, rawel plug & washers and held in position by criss crossing Gl wire etc. complete as per directions of Engineer-inCharge. 169 Sqm
32 32 6mm cement plaster to ceiling of mix 1 : 3 (1 cement: 3 fine sand) 450 Sqm
33 33 Providing and fixing water closet squatting pan ( Indian type W.C. pan) with 100 mm sand cast Iron P or Strap,10 litre low level P.V. C.flushing cisterincluding flush pipe (of approved make) "manually contro(led device (handle lever) conforming to IS:7231, with all fittings and fixtures complete, including cutting and making goodthe walls and floors wherever required. 7 Nos
34 34 Providing c;1nd fixing wash basin with C. I./M.S. brackets,15mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required:White Vitreous China Wash basin size\n630x450 mm with a pair of 15 mm C.P. brass\npillar taps. 10 Nos
35 35 Providing and fixing water closet squatting pan ( Indian type W.C. pan) with 100 mm sand cast Iron P or Strap,10 litre low level P.V. C.flushing cisterincluding flush pipe (of approved make) "manually contro(led device (handle lever) conforming to IS:7231, with all fittings and fixtures complete, including cutting and making goodthe walls and floors wherever required. 10 Nos
36 36 Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes SOR 7.4 UV stablized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropytene random fitings 1/C fixing the pipe with clamps at 1.00m spacing. This includes testing of joints complete as per direction of Engineer-in-charge. (Internal workexposed on wall) Pn-16 pipe, 25mm 00 150 Mtr
37 37 Pn-16 pipe, 32mm 00 50 Mtr
38 38 Providing and fixing PVC waste pipe of required dia including bends,Tee door bend,L bendtrap jointed withaddisive material ISI marked like prince,vector or equivalent brand all complete job. 100mm dia bore. 70 Mtr
39 39 75mm dia bore. 50 Mtr
40 40 Providing and fixing PTMT towel rail complete withbrackets fixed to wooden cleats with CP brass screws with concealed fitting arrangement of approved quality and colour:600 mm long towel rail with total length of 645 mm, 78 mm wide and effective height of 88 mm, weighing not less than190 gms. 10 Nos
41 41 Providing and fixing toilet paper holder C.P. brass 10 Nos
42 42 Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with brackets of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms. 8 Nos
43 43 Providing and fixing C.P. brass bib cock of approved quality conforming to IS : 8931\n15 mm nominal bore 7 Nos
44 44 Providing and fixing ball valve (PPR) of approved quality complete 32mm. 6 Nos
45 45 Providing and fixing C.P. brass close hole basin mixer piller tap of approved quality and make, weighing not less than1.970 kg.\n15 mm nominal bore of standard back type. 10 Nos
46 46 Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet 150 mm dia 6 Nos
47 47 Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing Rectangular shape 1500x450 mm 15 Nos
48 48 Providing and placing on terrace (at all floor levels)polyethylene water storage tank lSI : 12701 marked indicating the BIS License No. with cover and suitable locking arrangement and making necessary holes for inlet, outlet\nand overflow pipes but without fittings and the base supportfor tank [Sintex, Electroplast, Star, Lotus or equivalent having\nvalid lSI license]. \n 1500 Ltr
49 49 Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighingnot less than 810 gms.\n15 mm nominal bore. 6 Nos
50 50 Providing and fixing C.P. brass angle valve for basin mixer and gyser points _of approved make conforming to IS : 8931. 15 mm nominal bore 20 Nos
51 51 Providing and fixing of Brass fixtureof doors and Windows.Tower bolt door 150x10mm 44 Nos
52 52 Tower bolt window 100x10mm 150 Nos
53 53 Handle door 125mm 44 Nos
54 54 Handle Window 75mm 75 Nos
55 55 Latch 300x16x5mm 6 Nos
56 56 Latch 250x16x5mm 23 Nos
57 57 Cement concrete flooring 1:2:4 ( 1 cement: 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry, but excluding the cost of nosing of steps etc. complete. 50 mmthick with 20mm nominal size stoneaggregate.Crushed. 364 Sqm
58 58 Carriage of material by MT. a) Cement/Steel an avg. lead of 120 kms 151.02 MT.
59 59 b) Sand an average lead of 10 Kms 168.78 Cum
60 60 c) Stone aggregate an avg. lead of 15 kms 218.11 Cum
61 61 Stone an avg. lead of 18 kms 72.8 Cum
62 62 Earth an avg. lead of 1 kms. 82.08 Cum
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail