}

Repair To Joinery , Cupboard , Chowkhats , Pvc , Doors , Pvc , Cabinets , Almirah And Termite Works Under Age B/R-Ii At Ge Jhansi, JHANSI-Uttar Pradesh

Military Engineer Services-MES has published Repair To Joinery , Cupboard , Chowkhats , Pvc , Doors , Pvc , Cabinets , Almirah And Termite Works Under Age B/R-Ii At Ge Jhansi. Submission Date for this Tender is 01-02-2021. Civil Work Tenders in JHANSI Uttar Pradesh. Bidders can get complete Tender details and download the document.




Tender Notice

26524320
Corrigendum : Repair To Joinery , Cupboard , Chowkhats , Pvc , Doors , Pvc , Cabinets , Almirah And Termite Works Under Age B/R-Ii At Ge Jhansi
Open Tender
Indian
Uttar Pradesh
JHANSI
01-02-2021

Tender Details

Repair To Joinery , Cupboard , Chowkhats , Pvc , Doors , Pvc , Cabinets , Almirah And Termite Works Under Age B / R-Ii At Ge Jhansi

Corrigendum Details

Sr No CorrigendumDate Corrignedum CorrigendumType NewSubmissionDate
1 22-Jan-2021 Postpone Date 01-02-2021

Key Value

Document Fees
INR 500 /-
EMD
INR 40000.0 /-
Tender Value
INR 20 Lakhs /-

BOQ Items

Name of Work: REPAIR TO JOINERY, CUPBOARD, CHOWKHATS, PVC DOORS, PVC CABINETS, ALMIRAH AND TERMITE WORKS UNDER AGE B/R-II AT GE JHANSI
Sl. No. Item Description Item Code / Make Quantity Units
1 1 Taking down chowkhats with shutters (without taking off shutters from the frame) area not exceeding 1.5 Sqm each, and removing from site complete all as specified and directed. 40 Each
2 2 Taking down chowkhats with shutters (without taking off shutters from the frame) but area exceeding 1.5 Sqm but not exceeding 4 Sqm each and removing from site complete all as specified and directed. 50 Each
3 3 Taking down shutters n.exc 1.00 Sqm each complete all as specified and as directed. 80 Per Leaf
4 4 All as per item No. 3 above but n.exc 2.00 Sqm in each complete all as specified and as directed. 80 Per Leaf
5 5 S&F rolled mild steel sections as in doors/windows chowkhats/ frame of steel gate and hold fasts, fixed in position of grade Fe-410-0 or Fe-310-0 including all necessary welding etc complete all as specified and directed. 1450 Kg
6 6 M&L for cutting holes in to brick wall built in cement mortar for inserting hold fast exc hlaf brick and n.exc one brick and making good to dismantled portion with PCC 1:2:4 type B1 or CM 1:3 complete as specified and as directed 300 Each
7 7 M&L for treating small articles such as stops, covers, gully gratings, holdfasts, ends of post, back of chowkhats etc with tar, coal tar black paint area exc 0.1 Sqm and n.exc 0.5 Sqm each complete all as directed 4 Per 100 Nos
8 8 M&L for Kitchen cabinets, made of 18 to 20mm thick PVC solid sheet with one side of wooden texture decorative surface, including necessary cutting of sheet in to size, joining with screwes and adhesive fixing to wall with screws, with and including necessary fitting i.e. self closing type hydraulic hinges, SS handle, telescopic type ball bearing slide & runner suitable for drawers and megnetic lock for Kitchen cabinets, PVC bidding tape, complete cabinet(s) make in full width of plateform (max 600mm width), consist of min 05 Nos of kitchen cabinets complete all as specified and as directed by the for following :- (a) Minimum Two nos cabins, completely (all around) covered with PVC sheet with one door with one or two leaf shutter and one shelf in full depth made out of same materials. (b) One No cabin, completely (all around) covered with PVC sheet with three drawers in full depth made out of same materials, The size of drawers will be decided accordingly to site dimension and requirement.(c) Two Nos cabin completely (all around) covered with PVC sheet with front door having one or two leaf shutter or only with front door.Note : (i) The size of cabins/drawers will be decided accordingly to site dimension and requirement. (ii) The complete work will be carried out in line, level and proper finished manner and without any gap in joints. (iii) The area will be calculated from length and height of front face and payment will be made accordingly). \n 160 Sqm
9 9 M&L for kitchen cabinets, wall hanging type, made of 18 to 20 mm thick PVC solid sheet with one side of wooden texture decorative surface, including necessary cutting of sheet in to size joining with screwes and adhesive fixing to wall with screws, with and including necessary fitting like self closing type hydraulic hinges, SS handle, PVC bidding tape, kitchen cabinets consists of No of cabins having depth of 350mm of required size, All cabins having door(s) with one or two leaf shutter of same materials, complete all as specified and as directed . \nNote : (i) The size of cabins/drawers will be decided accordingly to site dimension and requirement. (ii) The complete work will be carried out in line, level and proper finished manner and without any gap in joints. (iii) The area will be calculated from length and height of front face and payment will be made accordingly \n 80 Sqm
10 10 S&F for 30mm thick 2nd class Hard wood glazed/gauze skelton shutters as in windows open rebated and prepare to receive glass, gauze etc (without sash bars) edges of framing plain chamfered or rounded, fitted with cut and mitred beads for securing glass etc size of members of shutter as specified in SSR Part-I section 8 clause 8.24 (b) complete all as specified and as directed. 45 Sqm
11 11 S&F for 35mm thick 2nd class Hard wood glazed and skelton shutters as in Doors open rebated and prepare to receive glass, gauze etc (without sash bars) edges of framing plain chamfered or rounded, fitted with cut and mitred beads for securing glass etc size of members of shutter as specified in SSR Part-I section 8 clause 8.24 (a) complete all as specified and as directed. 25 Sqm
12 12 M&L for 30mm thick flush shutters, solid core construction with particle board core and plywood face panels, commercial type on both sides complete all as specified and as directed. 25 Sqm
13 13 All as per item no 12 above but 25mm thick as in cup boards/shelves complete all as specified and directed 20 Sqm
14 14 S&F solid PVC door frame of size 50 mm x 47mm made out of 5 mm plain colour PVC sheet reinforced with M.S. square tube, in opening as per specification & drawing complete all as specified and as directed.. 125 RM
15 15 S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails, MS frames shall be covered with heat moulded plain colour PVC "C" channel having a PVC sheet strips of 20mm width struck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail panelling of plain colour PVC sheet to be fitted in the MS frame welded/or sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement, complete all as specified and directed. 60 Sqm
16 16 S&F 18/19 mm thick pre-laminated particle board one side with decorative choice lamination and other side balancing white lamination fixed with 19 mm wide and 6 mm thick 1st class hard wood beading all around for shutter of cupboard complete all as specified and directed. 15 Sqm
17 17 S & F anodised aluminium powder coating frame for Doors, partitions, windows, ventilators with one or more rebates including joining cleats for fixing etc complete all as specified and directed. 290 Kgs
18 18 S&F anodised aluminium powder coated door shutters, aluminium section weighing 0.55 kg/m including necessary cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminium snap beading screws etc., complete all as specoified and directed 24 Sqm
19 19 M&L for powder coated aluminum window shutters, sliding type, without sash bars, having three track section, aluminium sections for frame weighing 0.55 kg/m incl necessary joining cleats, glazing clips, powder coated aluminum snap beading, screws, powder coated aluminum fittings such as suitable flush type handles, complete all as specified and directed. 15 Sqm
20 20 S&F of aluminium Decco grill with 10 mm dia and 75 mm mesh size of design and pattern as approved by Engr-in-Charge, complete all as specified and directed. 15 Sqm
21 21 S&F 5.5 mm thick tinted glass fixing in aluminium door/window/ partion/ ventilator complete all as specified and directed. 13 Sqm
22 22 S & F mortice lock 100mm brass 4 levers verticle type suitable for aluminium door complete all as specified and directed. 10 Each
23 23 S & F body door closer hydraulically regulated designation No3, universal type, suitable for door shutters of 851 to 1000 mm in width and between 61 to 80 Kg complete all as specified and directed.. 10 Each
24 24 S&F MS Butt hinges 100 mm size as in door chowkhats complete all as specified and directed. 240 Each
25 25 S&F MS Butt hinges 75 mm size as in windows chowkhats complete all as specified and directed. 280 Each
26 26 S&F MS Butt hinges 50 mm size as in Cleats/stops complete all as specified and directed. 280 Each
27 27 S&F mild steel 300mm sliding door bolts plate type stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, complete all as specified and directed. 80 Each
28 28 S&F 150mm Aluminum handle cast type anodized complete all as specified and directed. 100 Each
29 29 S&F 150mm Mild steel pressed handle oval type stove enamelled black complete all as directed 100 Each
30 30 S&F 125mm Mild steel pressed handle oval type stove enamelled black complete all as specified and directed. 280 Each
31 31 S&F aluminium anodized barrel tower bolts of extruded section of length 150mm and fixed with cadymium plated wood series, complete all as specified and directed. 160 Each
32 32 S&F 200 mm long Mild steel barrel tower bolts stove enamelled black with bright bolt and fixed complete all as specified and directed. 100 Each
33 33 S&F 150 mm long Mild steel barrel tower bolts stove enamelled black with bright bolt and fixed complete all as specified and directed. 70 Each
34 34 S&F mild steel 300mm ordinary rat tail rod pattern springs including roller, roller plate, complete all as specified and directed. 30 Each
35 35 S&F galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm, complete all as specified and directed. 60 Sqm
36 36 M&L for ATT along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear meter including drilling and plugging holes etc in apron complete all as specified and directed 1500 RM
37 37 M&L for treatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement : 2 coarse sand) to match the existing floors complete all as specified and directed 950 Sqm
38 38 M&L for ATT at points of contact of wood work by chemical emulsion (in oil or kerosene based solution) @ 0.5 litre/hole by drilling 6mm dia holes at a downward angle of 45 degree at 150mm centre to centre and sealing the same complete all as specified and directed 450 RM
39 39 M&L for preparing new surfaces of wood or wood based materials of any description not otherwise described over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed. 85 Sqm
40 40 M&L for preperation of old surfaces of wood or wood base materials of any description not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed. 20 Sqm
41 41 M&L for preparing new steel surfaces of any description not otherwise described over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed. 40 Sqm
42 42 Welding thickness of metal n.exc 6mm in repairs exc 2.5 cm but n.exc 5cm in length including taking down, cleaning, preparing the surfaces to be welded and refixing in position in same opening after welding complete all as specified and directed 150 Each
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail