Uttar Pradesh Rajya Vidyut Utpadan Nigam Limited-UPRVUNL has published Maintenance And Repair Of Plant Boundary Wall And Cisf Watch Towers At Ptpp Parichha. Submission Date for this Tender is 02-02-2021. Tower Construction Tenders in Parichha Thermal Power Station Parichha Jhansi Uttar Pradesh. Bidders can get complete Tender details and download the document.
Name of Work: M&R of Plant Boundary wall and CISF watch towers at PTPP, Parichhaa. | |||||
---|---|---|---|---|---|
Sl. No. | Item Description | Item Code / Make | Quantity | Units | |
1 | 1 | Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m : All kinds of soil. | BI01010001010000000000000515BI0100001113 | 100 | Cum |
2 | 2 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:3:6(1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) | BI01010001010000000000000515BI0100001114 | 4 | Cum |
3 | 3 | Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. up to floor five level excluding cost of centering, shuttering, finishing and reinforcement: 1:2:4 (1 Cement 2 coarse sand :4 graded stone aggregate 20 mm nominal size) | BI01010001010000000000000515BI0100001116 | 10 | cum |
4 | 4 | Brick work with non modular fly ash lime bricks (FALG Bricks) conforming to IS:12894, class designation 10 average compressive strength in super structure above plinth level up to floor V level in : Cement mortar 1:6 (1 cement : 6 Coarse sand) | BI01010001010000000000000515BI0100001117 | 30 | Cum |
5 | 5 | Random rubble masonry with hard stone in superstructure above plinth level and upto floor five level, including leveling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) at window sills, ceiling level and the like : Cement mortar 1:6 (1 cement : 6 coarse sand) | BI01010001010000000000000515BI0100001118 | 10 | Cum |
6 | 6 | Same as Item No.5 but stone provided by department free of cost | BI01010001010000000000000515BI0100001119 | 5 | Cum |
7 | 7 | Demolishing stone rubble masonry manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge : In cement mortar | BI01010001010000000000000515BI0100001120 | 5 | cum |
8 | 8 | Steel Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete for TMT bars. | BI01010001010000000000000515BI0100001121 | 600 | Kg |
9 | 9 | Fencing with angle iron post placed at required distance embedded in cement concrete blocks, every 15th post, last but one end post and corner post shall be strutted on both sides and end post on one side only and provided with horizontal lines and two diagonals interwoven with horizontal wires, of barbed wire weighing 9.38 kg per 100 m (minimum), between the two posts fitted and fixed with G.I. staples, turn buckles etc. complete. (Cost of posts, struts, earth work and concrete work to be paid for separately). Payment to be made per metre cost of total length of barbed wire used. With G.I. barbed wire. | BI01010001010000000000000515BI0100001122 | 1500 | RM |
10 | 10 | Providing and fixing concertina coil fencing with punched tape concertina coil 600 mm dia 10 metre openable length ( total length 90 m), having 50 nos rounds per 6 metre length, upto 3 m height of wall with existing angle iron 'Y' shaped placed 2.4 m or 3.00 m apart and with 9 horizontal R.B.T. reinforced barbed wire, stud tied with G.I. staples and G.I. clips to retain horizontal, including necessary bolts or G.I. barbed wire tied to angle iron, all complete as per direction of Engineer-in-charge, with reinforced barbed tape(R.B.T.) / Spring core (2.5mm thick) wire of high tensile strength of 165 kg/ sq.mm with tape (0.52 mm thick) and weight 43.478 gm/ metre (cost of M.S. angle, C.C. blocks shall be paid separately) | BI01010001010000000000000515BI0100001126 | 400 | RM |
11 | 11 | Providing and fixing G.I. chain link fabric fencing of required width in mesh size 25x25 mm made of G.I. wire of dia 3 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer-in-charge. | BI01010001010000000000000515BI0100001127 | 20 | sqm |
12 | 12 | Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. | BI01010001010000000000000515BI0100001128 | 400 | Kg |
13 | 13 | As above Item No. 12 but structural steel shall be issued by the department free of cost. | 400 | Kg | |
14 | 14 | Centering and shuttering including shutting, propping etc. and removal of form work for : column and beams etc. including attached pilasters, buttresses, plinth and string courses fillets etc. | 200 | Sqm | |
15 | 15 | 12 mm thick cement plaster in 1:6 cement mortar. | 500 | sqm | |
16 | 16 | Renewing glass panes, with putty and nails wherever necessary: Float glass panes of thickness 4 mm | 15 | sqm | |
17 | 17 | Boring, Providing and installing cast in situ single under reamed piles of specified diameter and length below pile cap in M-25 cement concrete, to carry a safe working load not less than specified, excluding the cost of steel reinforcement but including the cost of boring with bentonite solution and the length of the pile to be embedded in pile cap etc. all complete. (Length of pile for payment shall be measured upto to the bottom of pile cap) : length of each pile 3.5 m and dia of pile 300 mm. | 10 | Rm | |
18 | 18 | Carriage, Laying, spreading and compaction of coal boulders from coal handling plant of PTPP including spreading in uniform thickness of 250mm, hand picking, rolling with 3 wheeled road/vibratory roller 8-10 tone in stages to proper grade. | 100 | sqm | |
19 | 19 | Hire charges of tyre mounted JCB etc including cost of fuel along with driver/operator | 60 | Hrs | |
20 | 20 | White washing with lime to give an even shade : Old work (two or more coats) | 120 | sqm | |
21 | 21 | Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete | 120 | sqm | |
22 | 22 | Distempering with dry distemper of approved brand and manufacture (one or more coats) and of required shade on old work to give an even shade. | 60 | sqm | |
23 | 23 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade : Old work (one or more coats) | 60 | sqm | |
24 | 24 | Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. | 60 | sqm | |
25 | 25 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work. | 120 | Sqm | |
26 | 26 | Supply & fixing Galvanized Mosquito proof heavy quality iron wire gauge with wire dia 0.63 mm over window and including supply of 2nd Class teack wood batten 62 mm x 19 mm and including making hole and supply and fixing of necessary screws, all material , labour and tools and plants etc. required for proper completion of the work. | 35 | sqm | |
27 | 27 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position: Sal wood. | 0.15 | Cum | |
28 | 28 | Providing and fixing aluminum work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS:733 and IS: 1285, fixed with raw plugs and screws or with fixing clips, or with expansion hold fasteners including necessary filling up of gaps at junctions, at top bottom and sides with required PVC /neoprene felt etc. Aluminum sections shall be smooth, rust free, straight, mitered and jointed mechanically wherever required including cleat angle, Aluminum snap beading for glazing /paneling, C.P. brass/stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing and paneling to be paid for separately).Anodized aluminum (anodized transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) | 80 | Kg | |
29 | 29 | Providing and fixing glazing in aluminum door, window, ventilator shutters and partitions etc. with PVC/neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminum snap beading shall be paid in basic item):With float glass panes of 5.50 mm thickness. | 10 | Sqm | |
30 | 30 | Cleaning of jungle by cutting grass vegetations, bushes above ground level including removal of rubbish up to a distance of 50 M out side the periphery of area cleaned. | 25000 | sqm | |
31 | 31 | Cleaning of jungle including uprooting of rank, vegetation grass, bush, wood trees and sapling of girth up to 30 cm. measured at a height of 1.0 M above G.L. and removal of rubbish up to distance of 50 M. out site the periphery of area cleared. | 6000 | Sqm | |
32 | 32 | Cartage of grass/malwa by tractor trally upto a distance of 1 km from periphery of area cleared, including cost of all labour, T&P etc. such as loading unloading & cartage, tractor trally, driver, fuel required for proper completion of work. | 300 | Cum |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail