Food Corporation Of India-FCI has published Special Repair To Roofing Of Godowns With Iron Profile Sheets At Fsd Samana Under District Patiala. Submission Date for this Tender is 20-01-2021. Godown Tenders in FSD Samana Chandigarh. Bidders can get complete Tender details and download the document.
| Name of Work: Special repair to roofing of godowns with profile sheet at FSD Samana under District Patiala | |||||
|---|---|---|---|---|---|
| Sl. No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Dismantling roofing including ridges, hips, valleys and gutters etc.,and stacking the material within 50 metres lead of :: Asbestos sheet. | Item 1 | 9458 | sqm |
| 2 | 2 | Taking out wind ties from roof including cutting out rusted bolts, nuts etc. and removing materials to any distance within compound and stacking. | Item 2 | 3675 | kg |
| 3 | 3 | Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes | Item 3 | 2386.4 | kg |
| 4 | 4 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge)0.50 mm + 0.05 %, total coated thickness with zinc coating 120 gsm as per IS: 277 in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches while transportation and should be supplied in single length upto 12metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces excluding the cost of purlins, rafters and trusses | Item 4 | 9315 | sqm |
| 5 | 5 | Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm + 0.05 % total coated thickness, Zinc coating120gsm as per IS: 277 in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete : ridges same profile sheet (500-600mm), | Item 5 | 385 | metre |
| 6 | 6 | Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10 mm and down gauge), including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design : In 75x75 mm deep chase | Item 6 | 738 | metre |
| 7 | 7 | Fixing of old wind tie with new fittings including painting two or more coats with anticorrosive bitumastic paint of approved brand & manufacturer over and including priming coat of ready mixed zinc chromate yellow primer of approved brand. | Item 7 | 1934 | metre |
| 8 | 8 | Extra for providing and fixing wind ties of 40x 6 mm flat iron section. | Item 8 | 74.4 | metre |
| 9 | 9 | Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level. | Item 9 | 115 | sqm |
| 10 | 10 | 12 mm cement plaster of mix : (1 cement: 4 fine sand) | Item 10 | 115 | sqm |
| 11 | 11 | Supply , installation, testing & commissioning of turbo ventilators size 22” in stainless steel 430 grade with approximate weight 4.85kg .The ventilator should have air absorption of 7 kg per hour 2440 CFM with blade length 369mm wings of 80mm,outer wings := 22”24nos inner wings 22”-6Nos, with self lubricating ball bearing etc.complete as per manufacture's specification and as per direction of Engineer-in-charge | Item 11 | 48 | each |
| 12 | 12 | Deduct old ACC sheets received from dismantling roof (Market Rate) | Item 12 | 9458 | sqm |
| 13 | 13 | Deduct J hooks available from dismantling of roof of godown and veranda. (Market rate) | Item 13 | 2289 | kg |
| 14 | 14 | Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. | Item 14 | 50 | cum |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
