Mathura Vrindavan Development Authority has published Work No 01 , Proposed Development Of Annapurna Block Opposite Jaipur Mandir At Vrindavan , Mathura. Submission Date for this Tender is 28-01-2021. Temple Tenders in MVDA Mathura Uttar Pradesh. Bidders can get complete Tender details and download the document.
Name of Work: Work No 01, Proposed development of Annapurna Block opposite Jaipur Mandir at Vrindavan, Mathura | |||||
---|---|---|---|---|---|
Sl. No. | Item Description | Item Code / Make | Quantity | Units | |
1 | 1 | Building Work | BI01010001010000000000000515BI0100001112 | ||
2 | 1.1 | Civil Work | BI01010001010000000000000515BI0100001113 | ||
3 | 1.101 | Earth work in excavation in foundation in ordinary soil (loam, clay, or sand) including lift upto 1.5 m and lead up to 30 m and including filling watering ramming of excavated earth in to the trenches or in to the space between the building and the sides of the foundation trenches or into the space between the building and the side of the foundation or in the plinth and removal of surplus earth as directed by E/I upto a distance of 30m.from the foundation trenches | BI01010001010000000000000515BI0100001114 | ||
4 | 1.102 | 0.00 to 1.50m | BI01010001010000000000000515BI0100001115 | 1340 | Cum |
5 | 1.103 | Provides & laying cement concrete in 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) & curing complete, including cost of form work in foundation and under floors. | BI01010001010000000000000515BI0100001116 | 110 | Cum |
6 | 1.104 | Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge. (Note :- Cement content considered in this item is @ 330 kg/cum. Excess/ less cement used as per design mix is payable/recoverable separately). | BI01010001010000000000000515BI0100001117 | ||
7 | 1.105 | All works upto plinth level | BI01010001010000000000000515BI0100001118 | 274 | Cum |
8 | 1.106 | All works above plinth level pto floor V level | BI01010001010000000000000515BI0100001119 | 582 | Cum |
9 | 1.107 | Centering and shuttering including strutting, propping etc. and removal of form for Foundations, footings, bases of columns, etc. for mass concrete | BI01010001010000000000000515BI0100001120 | 302 | sqm |
10 | 1.108 | Centering and shuttering including strutting, propping etc. and removal of form for Suspended floors, roofs, landings, balconies and access platform. with water proof ply 12 mm thick | BI01010001010000000000000515BI0100001121 | 2227 | sqm |
11 | 1.109 | Centering and shuttering including strutting, propping etc. and removal of form for Lintels, beams, plinth beams, girders, bressumers and cantilevers. with water proof ply 12 mm thick | BI01010001010000000000000515BI0100001122 | 1277 | sqm |
12 | 1.11 | Centering and shuttering including strutting, propping etc. and removal of form for Columns, Pillars, Piers, Abutments, Posts and Struts | BI01010001010000000000000515BI0100001123 | 1193 | sqm |
13 | 1.111 | Reinforcement of Reinforced concrete or reinforced brick work brought to required shape as necessary including bending for proper completion of the work and including the supply of steel and its waistage Bend, hooks, Binding wire and authorized over lapping shall be measured upto floor two level etc complete as per MoRT&H Specifications 12.40 (1600) as per Analysis | BI01010001010000000000000515BI0100001124 | 1134 | Qtl |
14 | 1.112 | Earth work in 3 km cartage & cutting or in embankment in ordinary soil excavation to be in the form of a regular pits not exceeding 0.50m in depth and earth work in embankment to be in 20cm layers including ramming and dressing the surface to required levels and slopes and also including 1.5 m lift and 30m lead. The earth in form of cutting (b) to be used as spoil banks within 50m distance as directed by the Engineer-in-Charge. | BI01010001010000000000000515BI0100001125 | 280 | Cum |
15 | 1.113 | Sand filling in plinth including supply of necessary quantity of local sand from the site of work and including watering dressing etc. required for proper completion of work. | BI01010001010000000000000515BI0100001126 | 16 | Cum |
16 | 1.114 | Class M150 (non Modular) brick work in 1:4 cement and coarse sand mortar in foundation and plinth including supply of all material, labour and T&P etc. required for proper completion of the work. | BI01010001010000000000000515BI0100001127 | 40 | Cum |
17 | 1.115 | Class-150 (non Modular) brick work but in in 1:4 cement and coarse sand mortar super structure above plinth level upto floor five level (upto five stories) including necessary cutting and moulding of brick work as required and also including honey combed brick work in thickness of wall more than 12 cm. | BI01010001010000000000000515BI0100001128 | 24 | Cum |
18 | 1.116 | Brick work with non modular fly ash bricks conforming to IS:12894, class designation 10 average compressive strength in super structure above plinth level up to floor V level in : Cement mortar 1:4 (1 cement : 4 coarse sand) | BI01010001010000000000000515BI0100001129 | 332 | Cum |
19 | 1.117 | 6mm ceiling plaster 1:3 (1 cement : 3 fine sand in F.M. not less than 1.25, 1:3 including chipping of RCC surafce before ceiling plaster. The cost of including all material, labout T&P and scaffolding etc. complete. | BI01010001010000000000000515BI0100001130 | 2214 | sqm |
20 | 1.118 | 12mm cement plaster with cement mortar in proportion of 1:4 cement & coarse sand of single coat for interior plastering upto floor two level including internal rounded angles chamfers and rounded angles not exceeding 80mm. In girth and finished even and smooth | BI01010001010000000000000515BI0100001131 | 2050 | sqm |
21 | 1.119 | 15mm cement plaster with cement mortar in proportion of 1:4 cement & coarse sand of single coat for interior plastering upto floor two level including internal rounded angles chamfers and rounded angles not exceeding 80mm. In girth and finished even and smooth | BI01010001010000000000000515BI0100001132 | 54 | sqm |
22 | 1.12 | Red Sand Stone work for wall lining etc. (Veneer work) 30mm thick in cement mortar 1:3 (cement:coarse sand) includingcamping jointing in white cement mortar 1:2 (white cement:stone dust)with an admixtureof pigment matching the stone shade | BI01010001010000000000000515BI0100001133 | 408 | sqm |
23 | 1.121 | Stone work (machine cut edges) for wall lining etc. (veneer work) upto 10 metre height, backing filled with a grout of average 12 mm thick cement mortar 1:3 (1 cement : 3 coarse sand) including pointing in white cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment matching the stone shade : (To be secured to the backing and the sides by means of cramps and pins which shall be paid for separately) : White sand stone - Exposed face machine cut and table rubbed with rough backing. 30 mm thick | BI01010001010000000000000515BI0100001134 | 252 | sqm |
24 | 1.122 | Providing and fixing 10 mm thick acid and/or alkali resistant tiles 300x300 mm size of approved make and colour using acid and/or alkali resisting mortar bedding, and joints filled with acid and/or alkali resisting cement as per IS : 4457, complete as per the direction of Engineer-in- Charge In dado/skirting on 12 mm thick mortar 1:4 (1 acid proof cement : 4 coarse sand) Acid and alkali resistant tiles , | BI01010001010000000000000515BI0100001135 | 318 | Sqm |
25 | 1.123 | Providing and fixing stainless steel cramps of required size and shape for anchoring stone wall lining to the backing or securing adjacent stones in stone wall lining in cement mortar 1:2 (1 cement : 2 coarse sand), including making the necessary chases in stone and holes in walls wherever required. | BI01010001010000000000000515BI0100001136 | 713 | kg |
26 | 1.124 | Providing and fixing expansion hold fasteners on C.C. /R.C.C./Brick masonry surface backing including drilling necessary holes and the cost of bolt etc complete. Fastener with threaded dia 6mm | BI01010001010000000000000515BI0100001137 | 5280 | nos |
27 | 1.125 | 40 mm thick rubbed stone flooring over 20 mm (average) thick base of cement mortar 1:5 (1 cement : 5 coarse sand) with joints 3 mm thick, side buttered with cement mortar 1:2 (1 cement : 2 stone dust) admixed with pigment to match the shade of stone and pointing with same mortar. 40 mm thick rubbed stone flooring over 20 mm (average) thick base of cement mortar 1:5 (1 cement : 5 coarse sand) with joints 3 mm thick, side buttered with cement mortar 1:2 (1 cement : 2 stone dust) admixed with pigment to match the shade of stone and pointing with same mortar. As per Bansiphadpur / Dholpur Pink complete as per direction of Engineer-in-charge. | BI01010001010000000000000515BI0100001138 | ||
28 | 1.126 | Red sand stone | BI01010001010000000000000515BI0100001139 | 87 | sqm |
29 | 1.127 | White sand stone | BI01010001010000000000000515BI0100001140 | 64 | sqm |
30 | 1.128 | Providing edge moulding to 18 mm thick marble stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. (MARBLE WORK) | BI01010001010000000000000515BI0100001141 | ||
31 | 1.129 | For Marble Stone Work | BI01010001010000000000000515BI0100001142 | 359 | rmt |
32 | 1.13 | For Granite Work | BI01010001010000000000000515BI0100001143 | 197 | rmt |
33 | 1.131 | Providing and laying Vertified Tiles in floor of 600x600mm sizes (thickness 10mm) with water absorption less than 0.08% and confirming to IS: 15622, of approved brand manufacture, in desired colour and shades, laid with cement based high polymer modified quit set tile adhesive (water based) confirming to IS :15477, including grouting of joints including preparation of 75mm thick base with concrete 1:4:8 complete as per E/I | BI01010001010000000000000515BI0100001144 | 453 | sqm |
34 | 1.132 | Providing and laying Vertified Tiles in floor of 600x600mm(anti skid tile) sizes(thickness 10mm) with water absorption less than 0.08% and confirming to IS: 15622, of approved brand manufacture, in desired colour and shades, laid with cement based high polymer modified quit set tile adhesive (water based) confirming to IS :15477, including grouting of joints. | BI01010001010000000000000515BI0100001145 | 46 | Sqm |
35 | 1.133 | (a) P/L 18mm Black Granite stone (super quality) flooring over 20mm thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with white cement slurry including rubbing and polishing complete. | BI01010001010000000000000515BI0100001146 | 142 | sqm |
36 | 1.134 | Extra for fixing marble /granite stone, over and above corresponding basic item, in facia and drops of width upto 150 mm with epoxy resin based adhesive, including cleaning etc. complete. | BI01010001010000000000000515BI0100001147 | 9 | sqm |
37 | 1.135 | Extra for providing opening of required size & shape for wash basin/ kitchen sink in kitchen platform, vanity counter and similar location in marble/ Granite/ stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete. | BI01010001010000000000000515BI0100001148 | 7 | No. |
38 | 1.136 | Kota stone slab flooring over 20mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1:4 (1 cement : 4 coarse sand) - 25mm thick | BI01010001010000000000000515BI0100001149 | 666 | sqm |
39 | 1.137 | Kota stone slab 20mm thick in risers of steps, skirting dado and pillairs laid on 10mm thick cement mortar 1:3 (1 cement : 3 coarse sand) jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete. | BI01010001010000000000000515BI0100001150 | 53 | sqm |
40 | 1.138 | (a) P/L 20 mm Rajnagar Stone / Katni Stone (super quality) flooring as per sample of marble approved by Engineer-in-charge, over 20mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with grey cement slurry including rubbing and polishing complete. | BI01010001010000000000000515BI0100001151 | 875 | sqm |
41 | 1.139 | Washed stone grit plaster on exterior walls height upto 10 metre above ground level, in two layers, under layer 12 mm cement plaster 1:4 (1 cement : 4 coarse sand ), furrowing the under layer with scratching tool, applying. cement slurry on the under layer @ 2 Kg of cement per square metre, top layer 15 mm cement plaster 1:1/ 2:2 (1 cement: 1/2 coarse sand : 2 stone chipping 10 mm nominal size), in panels with groove all around as per approved pattern, including scrubbing and washing the top layer with brushes and water to expose the stone chippings ,complete as per specification and direction of Engineer-in- charge (payment for providing grooves shall be made separately) | BI01010001010000000000000515BI0100001152 | 625 | sqm |
42 | 1.14 | Providing and fixing tiled false ceiling of approved materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main "T" runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm centre to centre and cross "T" of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main "T" at 600 mm centre to centre to form a grid of 1200x600 mm and secondary cross "T" of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24X0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main "T" runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge. GI metal ceiling lay in plain tegular edge global white color tiles of size 596 x 596 mm and 0.5 mm thick with 8 mm drop, made of GI sheet having galvanizing of 100 gm/sqm (both side inclusive) and electro statically polyster powder coated of thickness 60 micrones (minimum), including factory painted after bending. | BI01010001010000000000000515BI0100001153 | 570 | sqm |
43 | 1.141 | Mild steel or iron work in Small sizes such as trusses, built up gates record rack, roof work, gates etc. brought to required form including drilling holes revitting or welding where necessary, and also including supply of steel bolts, nuts, wastage etc. and their fixing require for proper completion of the work. | BI01010001010000000000000515BI0100001154 | 54 | Qtl |
44 | 1.142 | Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-incharge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). | BI01010001010000000000000515BI0100001155 | 504 | kg |
45 | 1.143 | Providing and fixing ISI marked flush door shuttrs conforming to IS : 2202 (Part-1) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veenering with vertical grains or cross bands and face veneers on both faces of shutters including ISI marked stainless steel butt hinges with necessary screws, steel handles sliding bolt, door stopper and tower bolt. 35 mm thick | BI01010001010000000000000515BI0100001156 | 66 | sqm |
46 | 1.144 | Providing and fixing 12mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top and bottom pivot & spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-in-Charge (Door Handle, lock and stopper etc. to be paid separately) | BI01010001010000000000000515BI0100001157 | 8 | sqm |
47 | 1.145 | "Providing and fixing factory made uPVC white colour casement/casement cum fixed glazed windows comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, stainless steel (SS 304 grade) friction hinges, zinc alloy (white powder coated) casement handles, G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes and silicon sealant shall be paid separately) Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable." | BI01010001010000000000000515BI0100001158 | ||
48 | 1.146 | Casement window double panels with S.S. friction hinges (350 x 19 x 1.9 mm) made of (big series)frame 67 x 60 mm & sash / mullion 67 x 80 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead/ double glazing bead of appropriate dimension. (Area of window above 1.50 sqm). | BI01010001010000000000000515BI0100001159 | 171 | sqm |
49 | 1.147 | Casement window single panel with S.S. friction hinges (300 x 19 x 1.9 mm), made of (small series) frame 47 x 50 mm & sash 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glass pane glazing bead of appropriate dimension. (Area of window upto 0.75 sqm.) | BI01010001010000000000000515BI0100001160 | 5 | Sqm |
50 | 1.148 | Providing and fixing bright finished brass 100 mm mortice latch and lock, ISI marked, with six levers and a pair of anodised (anodic coating not less than grade AC 10 as per IS : 1868) aluminium lever handles of approved quality with necessary screws etc. complete | BI01010001010000000000000515BI0100001161 | 29 | nos |
51 | 1.149 | Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete. Single rubber stopper | BI01010001010000000000000515BI0100001162 | 3 | nos |
52 | 1.15 | Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than. grade AC 10 as per IS : 1868 ), transparent or dyed to required colour or shade, with necessary screws etc. complete: | BI01010001010000000000000515BI0100001163 | ||
53 | 1.151 | 250x10mm | BI01010001010000000000000515BI0100001164 | 3 | nos |
54 | 1.152 | Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete: | BI01010001010000000000000515BI0100001165 | ||
55 | 1.153 | 125mm | BI01010001010000000000000515BI0100001166 | 3 | nos |
56 | 1.154 | Providing and fixing aluminium extruded section body tubular type universal hydraulic door 'closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete. | BI01010001010000000000000515BI0100001167 | 29 | nos |
57 | 1.155 | Providing and laying integral cement base water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc. consisting of following operations: (a) Applying a slurry coat of neat cement using 2.75 kg/sqm ofcement admixed with water proofing compound conforming to IS 2645 and approved by Engineer-in-charge over the RCC slab adjoining wall upto 300 mm height including cleaning the surface before treatment. (b) Laying brick bats with mortar using broken brick bats 25mm to 115 mm size with 50% of cement mortar 1:5 (1 cement : 5 coarse sand) admixed with water proofing compound conforming to IS: 2645 and approved by Engineer-in-charge to required slope and treating similarly the adjoining heights upto 300mm height including rounding of junctions of walls and slabs. (c) After two days of propoer curing applying a second of cement slurry using 2.75 kg/sqm of cement admixed with water proofing compound conforming to IS 2645 and approved by Engineer-in-charge. (d) Finishing the surface with 20mm thick jointless cement mortar of mix 1:4 (1 cement : 4 coarse sand) admixed water proofing compound conforming to IS 2645 and approved by Engineer in charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300 x 300 mm square 3 mm deep. (e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test . All above operations to be done in order and as directed and specified by the Engineer-in-charge with average thickness of 120 mm and minimum thickness at khurra as 86mm | BI01010001010000000000000515BI0100001168 | 1032 | sqm |
58 | 1.156 | Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10 mm and down gauge), including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design : In 75x75 mm deep chase | BI01010001010000000000000515BI0100001169 | 215 | metre |
59 | 1.157 | Providinf & fixing 30 mm thick plain factory made panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19mm x 19mm for styles and 15mm x 15mm for top and bottom rails. M.S. frame shall have a cost of steel primers of approved make and manufacture. M.S. frame covered with 5mm thick heat moulded PVC "C' channel of size 30mm thickness, 70mm width out of which 50mm shall be flat and 20mm shall be tapered in 45 degree angle on both sides forming styles and 5mm thick, 95mm wide PVC sheet out of which 75mm shall be flat and 20mm shall be tapered in 45 degree on the inner side to form top & bottom rail and 115mm wide PVC sheet out of which 75mm shall be flat and 20mm shall be tapered on both sides to form lock rail. Top, bottom and lock rails shall be provided both sides of the panel. 10mm (5mm x 2) thick, 20mm wide cross PVC sheet be provided as gap insert for top & bottom rail. panelling of 5mm thick both side PVC sheet to be fitted in the M.S. frame welded/ sealed to the styles & rails with 7mm (5mm + 2mm) thick x 15mm wide PVC sheet beading on inner side, and joined together with solvent cement adhesive. An additional 5mm thick PVC strip of 20mm width is to be stuck on the interior side of the C channel using pVC solvent adhesive etc. complete as per direction of Engineer-in-charge, manufacturers specification and drawing | BI01010001010000000000000515BI0100001170 | 10 | sqm |
60 | 1.158 | Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x 1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement, rounding the edges, making and finishing the outlet complete. | BI01010001010000000000000515BI0100001171 | 8 | Nos |
61 | 1.159 | Finishing walls with putty approved brand and manufacture and of required shade on undacorated wall surface to give even shade over including curing and cost os all material, labour, T&P etc. required for proper completion of work. | BI01010001010000000000000515BI0100001172 | 3654 | sqm |
62 | 1.16 | Distempering (Two coat) with oil bound distemper of approved brand and manufacture and of required shade and undecorated wall surface to give and even shade over & including a priming coat with cement primer of approved brand and manufacture such as Berger. J&N Shalimar, Asian paints after thoroughly brushing surface free from mortar droppings and other foreign matter and also including preparing the surface even with plaster of approved synthetic material and sand papered smooth including cost of all materials. | BI01010001010000000000000515BI0100001173 | 3654 | Cum |
63 | 1.161 | Painting two coat over priming coat on Wooden surfaces up to 10 cm width or girth or small articles not exceeding 0.10 sq.m in area with superior synthetic enamel such as luxol-3, Hi-gloss, apcolite, Superior, Duplex specified brushing to give an even shade and including cleaning the srface of all dirt, dust and other foreign matter sand papering and scrapping including cost of all material, labor, tools and plants etc, required or proper completion of the work. | BI01010001010000000000000515BI0100001174 | 140 | sqm |
64 | 1.162 | Painting two coat over priming coat on Steel and other metal surfaces up to 10 cm width or girth or small articles not exceeding 0.10 sq.m in area with superior synthetic enamel such as luxol-3, Hi-gloss, apcolite, Superior, Duplex specified brushing to give an even shade and including cleaning the srface of all dirt, dust and other foreign matter sand papering and scrapping including cost of all material, labor, tools and plants etc, required or proper completion of the work. | BI01010001010000000000000515BI0100001175 | 442 | Sqm. |
65 | 1.163 | Finishing walls with exterior emulsion paint (Apex) of approved brand and manufacture and of required shade and undacorated wall surface to give even shade over @ 1.25 Ltr/10sqm including one coat of primer applid @ 0.75Ltr/l0sqm coat curing and cost of all material; labour, T&P etc. required for proper completion of work.for two coat. | BI01010001010000000000000515BI0100001176 | 400 | sqm |
66 | 1.164 | Providing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 0.80 mm thick with zinc coating not less than 275 gm/m² | BI01010001010000000000000515BI0100001177 | 617 | Sqm |
67 | 1.165 | Providing, laying spreading & compacting of granular sub-base by providing coarse graded (Gr-1) materials, spreading in uniform layers with Motor Grader on prepared surface on prepared surface, mixing by mix in placed method with Rotovator at OMC and compacting with in layers with smooth wheeled Vibratory Roller to achieve the desired density, complete as per MoRT&H clause 401 & as directed by Engineer Incharge including all machinery charges & including all labour, T&P etc required for proper completion of the work.. | BI01010001010000000000000515BI0100001178 | 150 | Cum |
68 | 1.166 | Laying of I shaped precast Rouble Moulded Interlocking tiles of thickness 80mm (Compressive strength not less then 30Mpa and weight 4.50kg) Including 25mm thick local sand base levelling and dressing of surface to required level and slope, filling joints with local sand all complete work. | BI01010001010000000000000515BI0100001179 | ||
69 | 1.167 | 80 mm Coloured Tile | BI01010001010000000000000515BI0100001180 | 240 | Sqm |
70 | 1.168 | 80 mm Rubber molded Tile | BI01010001010000000000000515BI0100001181 | 960 | Sqm |
71 | 1.169 | Dismantling of flexible pavement and disposal of dismantle material upto a lead of 1000 meters, stacking serviceable and unserviceable materials separately. | BI01010001010000000000000515BI0100001182 | 48 | cum |
72 | 1.17 | Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/ bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer-in-charge, upto 90 metre depth below ground level. For all types of soil 300mm dia | BI01010001010000000000000515BI0100001183 | 160 | metre |
73 | 1.171 | Supplying, assembling, lowering and fixing in vertical position in bore well unplasticized PVC medium well screen (RMS) pipes with ribs, conforming to IS: 12818, including hire & labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer-in-charge. 100 mm nominal size dia | BI01010001010000000000000515BI0100001184 | 160 | metre |
74 | 1.172 | Supplying, filling, spreading & leveling stone boulders of size range 5 cm to 20 cm, in recharge pit, in the required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge. | BI01010001010000000000000515BI0100001185 | 16 | cum |
75 | 1.173 | Supplying, filling, spreading & leveling gravels of size range 5 mm to 10 mm, in the recharge pit, over the existing layer of boulders, in required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge. | BI01010001010000000000000515BI0100001186 | 16 | cum |
76 | 1.174 | Supplying, filling, spreading & leveling coarse sand of size range 1.5 mm to 2 mm in recharge pit, in required thickness over gravel layer, for all leads & lifts, all complete as per direction of Engineer -incharge. | BI01010001010000000000000515BI0100001187 | 11 | cum |
77 | 1.175 | Laying at or near ground level kerb stone of size 12"x18"x6" types in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement : 3 coarse sand), including making joints with or without grooves (thickness of joints, except at sharp curve, shall not be more than 5mm) including making drainage opening wherever required etc. complete as per direction of Engineer-in-charge. (Length of finished edging shall be measured for payment). | BI01010001010000000000000515BI0100001188 | 120 | Rmt |
78 | 1.176 | Extra for stone work ashlar sunk or moulded or sunk and moulded or carved in : Circular or polygonal pillars | BI01010001010000000000000515BI0100001189 | 14 | cum |
79 | 1.177 | Extra for stone work (veneer work) curved on plan with a mean radius not exceeding 6 m. | BI01010001010000000000000515BI0100001190 | 25 | cum |
80 | 1.178 | Extra for stone work ashlar sunk or moulded in cornices. | BI01010001010000000000000515BI0100001191 | 100 | metre |
81 | 1.179 | 30 mm red sand stone sun shade (chisel dressed) supported on red sand stone brackets, fixed in walls with cement mortar 1:4 (1 cement : 4 coarse sand), including finishing complete. | BI01010001010000000000000515BI0100001192 | 164 | sqm |
82 | 1.18 | Providing and fixing stone jali 40 mm thick throughout in cement mortar 1:3 (1 cement : 3 coarse sand), including pointing in white cement 1:2 (1 white cement : 2 stone dust) with an admixture of pigment, matching the stone shade, jali slab without any chamfers etc. | BI01010001010000000000000515BI0100001193 | 230 | sqm |
83 | 1.181 | Providing selection of Red Sand Stone Chatri Octagon 8 x 8 x 15 ft. Having coverage area 64 sqft stone finish complete as per direction of Engineer-in-Charge. | BI01010001010000000000000515BI0100001194 | 1 | set |
84 | 1.182 | Providing and laying water proofing treatment to vertical and horizontal surfaces of depressed portions of W.C., kitchen and the like consisting of: (i) Ist course of applying cement slurry @ 4.4 kg/sqm mixed with water proofing compound onforming to IS 2645 in recommended proportions including rounding off junction of vertical and horizontal surface. (ii) IInd course of 20 mm cement plaster 1:3 (1 cement : 3 coarse sand) mixed with water proofing compound in recommended proportion including rounding off junction of vertical and horizontal surface.(iii) IIIrd course of applying blown or residual bitumen applied hot at 1.7 kg.per sqm of area (iv) IVth course of 400 micron thick PVC sheet. (Overlaps at joints of PVC sheet should be 100 mm wide and pasted to each other with bitumen @ 1.7 kg/sqm) | BI01010001010000000000000515BI0100001195 | 102 | sqm |
85 | 1.183 | Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design | BI01010001010000000000000515BI0100001196 | 1 | No. |
86 | 1.184 | Constructing soak pit 1.20x1.20x1.20 m filled with brickbats including S.W. drain pipe 100 mm diameter and 1.20 m long complete as per standard design. | BI01010001010000000000000515BI0100001197 | 1 | No. |
87 | 1.185 | Antitermite treatment along external wall where the appron is not provided using chemical emulsion @ 7.5 ltr/sqm of the vertical surface of the substructure to a depth of 300 mm including excavation channel along the wall and rodding etc. complete. Chlorpyriphos / lindane EC 20% with 1% concentration | BI01010001010000000000000515BI0100001198 | 921 | sqm |
88 | 1.2 | Plumbing | BI01010001010000000000000515BI0100001199 | ||
89 | 1.201 | Providing and fixing water closet squatting pan (Europen type W.C. pan ISI mark) with seat and lid 10 litre low level white P.V.C. flushing cistern, including flush pipe, manually controlled device (handle lever) conforming to IS :7231, with all fitting and fixtures complete, including cutting and making good the walls and floors wherever required. white vitreous china orissa pattern W.C. pan of size 580x440mm with integral type foot rests including stop cock complete in all respect. | BI01010001010000000000000515BI0100001200 | 5 | nos |
90 | 1.202 | Providing and fixing water closet squatting pan (indian type W.C. pan ISI mark) with seat and lid 10 litre low level white P.V.C. flushing cistern, including flush pipe, manually controlled device (handle lever) conforming to IS :7231, with all fitting and fixtures complete, including cutting and making good the walls and floors wherever required. white vitreous china orissa pattern W.C. pan of size 580x440mm with integral type foot rests including stop cock complete in all respect. | BI01010001010000000000000515BI0100001201 | 4 | nos |
91 | 1.203 | Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350 mm with white PVC automatic flushing cistern, with fittings, standard size C.F. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap .with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and making good the walls and floors wherever required: range of four half stall urinal with 10 litre PVC. automatic flushing cistern | BI01010001010000000000000515BI0100001202 | 4 | nos |
92 | 1.204 | Providing and fixing wash basin (ISI mark) with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require. White vitreous china chine wash basin size (630X450) mm with single 15mm cp brass pillar tap. | BI01010001010000000000000515BI0100001203 | 5 | nos |
93 | 1.205 | P/f flexible waste pipe 40mm dia | BI01010001010000000000000515BI0100001204 | 11 | nos |
94 | 1.206 | P/f 100x75mm/ 100 mm dia PVC nehani trap | BI01010001010000000000000515BI0100001205 | 22 | nos |
95 | 1.207 | P/f Stainless Steel jali of 100x100mm sqm / 100 mm dia | BI01010001010000000000000515BI0100001206 | 22 | nos |
96 | 1.208 | Providing & fixing P.V.C. pipe fittings T bend sockets, M.S. holdler clamp all complete. | BI01010001010000000000000515BI0100001207 | ||
97 | 1.209 | 140mm dia | BI01010001010000000000000515BI0100001208 | 180 | RMT |
98 | 1.21 | 110mm dia | BI01010001010000000000000515BI0100001209 | 200 | RMT |
99 | 1.211 | 90 mmm | BI01010001010000000000000515BI0100001210 | 160 | RMT |
100 | 1.212 | Providing and fixing chlorinated polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply, including all CPVC plain and brass threded fittings including fixing with clamps at 1m spacing. This includes jointing of pipes and fittings, with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in-charge. Concealed work, including cutting chases and making good the wall etc. | BI01010001010000000000000515BI0100001211 | ||
101 | 1.213 | 20mm dia | BI01010001010000000000000515BI0100001212 | 300 | RMT |
102 | 1.214 | 32mm dia | BI01010001010000000000000515BI0100001213 | 200 | RMT |
103 | 1.215 | Providing & fixing gun metal gate valve with C.I. wheel of approved quality (screwed end). | BI01010001010000000000000515BI0100001214 | ||
104 | 1.216 | 32mm dia | BI01010001010000000000000515BI0100001215 | 10 | nos |
105 | 1.217 | Providing and fixing PTMT bib cock of approved quality and colour, 15mm nominal bore, 86 mm long, weighing not less than 88 gm | BI01010001010000000000000515BI0100001216 | 12 | nos |
106 | 1.218 | Providing and fixing PTMT long body bib cock of approved quality and colour, 15mm nominal bore, 122 mm long, weighing not less than 88 gm | BI01010001010000000000000515BI0100001217 | 12 | nos |
107 | 1.219 | Providing and fixing PTMT stop cock of approved quality and colour 15 mm nominal bore, 86 mm long, weighing not less than 88 gms | BI01010001010000000000000515BI0100001218 | 12 | nos |
108 | 1.22 | Providing and fixing PTMT swivelling shower, 15 mm nominal bore,weighing not less than 40 gms | BI01010001010000000000000515BI0100001219 | 8 | nos |
109 | 1.221 | Constructing brick masonry chamber for underground C.I. inspection chamber and bends with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. cover with frame (light duty) 500 x 700 mm internal dimension 45 cm deep for pipe line with one or two inlets : with common burnt clay F.P.S. (non modular bricks of class designation M-150, total weight of cover with frame to be not less than 38kg ( weight of cover 23 kg and weight of frame 15kg), RCC top slab with 1:2:4 mix (1 cement : 2 coarse sand : graded stone aggregate 20 mm nominal size) foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregaet 40 mm nominal size) inside plastering 12mm thick with cement mortar 1:3 (1 cement : 3 coarse sand), finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design. | BI01010001010000000000000515BI0100001220 | 6 | nos |
110 | 1.222 | extra for depth beyond 45cm of brick masonry chamber | BI01010001010000000000000515BI0100001221 | 6 | rmt |
111 | 1.223 | S/F Water storage tank P.V.C syntax or equivalent make including float value, connecting Rod of brass, etc all complete. | BI01010001010000000000000515BI0100001222 | 12001.4 | Ltr |
112 | 1.224 | Making connection of drain or sewer line with existing manhole including breaking into and making good the walls, floors with cement concrete 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) cement plastered on both sides with cement mortar 1:3 (1 cement : 3 coarse sand), finished with a floating coat of neat cement and making necessary channels for the drain etc. complete : For pipes 100 to 250 mm diameter | BI01010001010000000000000515BI0100001223 | 3 | nos |
113 | 1.225 | P/f mirror of superior glass and of rectangle 453 x357mm in size with plastic moulded frame of approved make and shade with 6mm thick hard board backing . | BI01010001010000000000000515BI0100001224 | 5 | nos |
114 | 1.226 | Supply and making connection of 25mm nominal bore in water line including ferrul, clamp, excavation all complete | BI01010001010000000000000515BI0100001225 | 7 | nos |
115 | 1.227 | Providing and fixing 16 mm M.S. Fan clamps of standard shape and size in existing R.C.C. slab, including cutting chase, anchoring clamp to reinforcement bar, including cleaning, refilling, making good the chase with matching concrete, plastering and painting the exposed portion of the clamps complete | BI01010001010000000000000515BI0100001226 | 35 | nos |
116 | 1.228 | Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required: Kitchen sink without drain board(i) 610x510 mm bowl depth 200 mm | BI01010001010000000000000515BI0100001227 | 3 | nos |
117 | 1.229 | Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making" channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) Fisnihed with a floating coat of neat cement complete as per standard design : (b) Inside size 1200 x 1200mm and 1.0meter deep including C.I. Cover frame. | BI01010001010000000000000515BI0100001228 | 2 | Nos |
118 | 1.23 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 15mm nominal bore | BI01010001010000000000000515BI0100001229 | 4 | Nos |
119 | 1.231 | Providing and fixing C.P. Brass extension nipple (size 15mmx50mm) of approved make and quality as per direction of Engineer-in-charge. | BI01010001010000000000000515BI0100001230 | 4 | Nos |
120 | 1.3 | Electrical | BI01010001010000000000000515BI0100001231 | ||
121 | 1.301 | S & F surface/Flush mounting 12 ways TPN distribution board with additional metal door without MCB complete in all respect, as directed at site by Engineer in charge. CAT A | BI01010001010000000000000515BI0100001232 | 11 | nos |
122 | 1.302 | S & F of 100 Amp 4 pole MCCB (25 KA) Thermal Magnetic release | BI01010001010000000000000515BI0100001233 | 11 | nos |
123 | 1.303 | S&F of 0.5 Amp to 5 Amp. SP MCB (10KA) C Curve | BI01010001010000000000000515BI0100001234 | 83 | nos |
124 | 1.304 | S&F of 6 Amp to 32 Amp. SP MCB (10KA) C Curve | BI01010001010000000000000515BI0100001235 | 38 | nos |
125 | 1.305 | Supply and wiring of submain with two number 6 Sq.mm FRLSH PVC insulated 1100V grade multistrand single core copper conductor cable in 20 mm dia heavy guage rigid steel conduit concealed in wall, complete with one number 14 SWG copper earth continuity wir etc. complete in all respect. | BI01010001010000000000000515BI0100001236 | 400 | mtr |
126 | 1.306 | Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. | BI01010001010000000000000515BI0100001237 | ||
127 | 1.307 | 5/6 A Switch | BI01010001010000000000000515BI0100001238 | 30 | nos |
128 | 1.308 | 15/16 A Switch | BI01010001010000000000000515BI0100001239 | 15 | nos |
129 | 1.309 | 3 Pin 5/6A Socket | BI01010001010000000000000515BI0100001240 | 30 | nos |
130 | 1.31 | 6 Pin 15/16A Socket | BI01010001010000000000000515BI0100001241 | 15 | nos |
131 | 1.311 | Supply & burring of Safe Earthing Electrode T-19, (Hot Dip Galvanized), length upto 3000mm, outer dia 50mm, inner dia 25 mm, terminal dia 12mm, outer GI pipe of 16 SWG and inner GI pipe of 12 SWG with Hot Dip Galvanization upto 100 micron filled with crystalline conductive mixture (CCM) having anti corrosive & conductive property with 50 kgs activated soil (BFC) capable of reducing the soil resistivity with good mixture of retaining capacity and one earthing lead of 25mm x 3mm GI strip, upto switch board (from apron to switch board, the cost of GI strip will be extra) along with 30 cm square CI frame with hinged cover & masonry housing. Make : As approved in UP PWD & CPRI certified. | BI01010001010000000000000515BI0100001242 | 4 | nos |
132 | 1.312 | Wiring point for light in 1.5 sq mm FRLSH PVC insulated multistrand single core copper conductor cable in heavy guage rigid PVC conduit pipe concealed in the wall complete with 14 SWG copper earth continuity wire, GP Box, piano type switch & ceiling rose /angle/batten holder on 3 mm thick phenolic laminated backelite sheet etc., complete in all respect, as directed including matching colour wash. | BI01010001010000000000000515BI0100001243 | 95 | nos |
133 | 1.313 | Add for light/fan points with modular type switch in place of piano type switch. | BI01010001010000000000000515BI0100001244 | 95 | nos |
134 | 1.314 | Wiring point for fan with 1.5 sqmm. P.V.C. insulatled single core copper conductor cable in heavy gauge rigid P.V.C. conduit pipe partially laid in slab and partlly conceled in wall complete with 8 SWG GI earth continuity wire, piano type switch and ceiling rose on 3 mm thick phenolic laminated backlite sheet etc complete in all respect, including matching colour wash. | BI01010001010000000000000515BI0100001245 | 34 | nos |
135 | 1.315 | Add for light/fan points with modular type switch in place of piano type switch. | BI01010001010000000000000515BI0100001246 | 34 | nos |
136 | 1.316 | Wiring point for plug with 1.5 sqmm. FRLSH P.V.C. insulatled multistrand core copper conductor cable as earthwire drawn in the conduit complete with 14 SWG copper earth continuity wire, GP box piano type switch and socket etc. complete in all respect including matching colour wash. | BI01010001010000000000000515BI0100001247 | 40 | nos |
137 | 1.317 | Add for plug points with modular type switch and socket in place of piano type switch and socket | BI01010001010000000000000515BI0100001248 | 40 | nos |
138 | 1.318 | Supply and fixing of power plug with 15A/250 volt flush type switch and 5 pin 15A/250V flush type universal socket in suitable M.S. box of 175 mm x 100 mm x 50 mm size with phenolic laminated bakelite sheet cover 3mm thick fixed brass machine screw and cup washer. | BI01010001010000000000000515BI0100001249 | 21 | nos |
139 | 1.319 | Supply and wiring of submain with two number 4 sq. mm FRLSH P.V.C. insulated 1100 V grade multistrand single core copper conductor cable in 20mm dia heavy duty 2mm thick PVC conduit partly concled in wall and partly laid in slab along with Reinforcement before concreting with one no. 14 SWG GI earth contunity wire including colour wash etc. Completed in all Respects. | BI01010001010000000000000515BI0100001250 | 400 | Rmt |
140 | 1.32 | Supply and fixing hexagonal fan box with hexagonal side of approx 80 mm in length fabricated from 16 SWG MS sheet incorporating 10 mm dia. M.S. round bar duly bent for supproting fan hanger duly painted with red oxide and screwing arrangement with wiring | BI01010001010000000000000515BI0100001251 | 40 | nos |
141 | 1.321 | S/F of 16 Amp. 240 volt D.P. metal clad rewireable type switch fuse unit of M.D.F.E.G./Teak wood board complete in all respects. | BI01010001010000000000000515BI0100001252 | 6 | nos |
142 | 1.322 | Supply and wiring of submain with two number 2.5 sq. mm FR P.V.C. insulated 1100 V grade multistrand single core copper conductor cable in 20mm dia heavy duty 2mm thick PVC conduit partly concled in wall and partly laid in slab along with Reinforcement before concreting with one no. 14 SWG GI earth contunity wire including colour wash etc. Completed in all Respects. | BI01010001010000000000000515BI0100001253 | 500 | rmt |
143 | 1.323 | Supply and fixing of recess/Surface/Pendent mounting round 10 Watt 15 Watt LED Down Lighter having Power coated die, cast aluminium housing with heat sink, diffuser/Reflector and driver set comlete in all respect. CAT- AAA | BI01010001010000000000000515BI0100001254 | 95 | nos |
144 | 1.324 | Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required. | BI01010001010000000000000515BI0100001255 | ||
145 | 1.325 | 3 Module | BI01010001010000000000000515BI0100001256 | 30 | Nos |
146 | 1.326 | 6 Module | BI01010001010000000000000515BI0100001257 | 18 | Nos |
147 | 1.327 | 8 Module | BI01010001010000000000000515BI0100001258 | 13 | Nos |
148 | 1.328 | Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required. | BI01010001010000000000000515BI0100001259 | 40 | Nos |
149 | 1.329 | Supply of Ceiling Fan with fan motor of AC permanent insulation, capacitor rating conforming BEE 5 star rating and IS:374/79 and also comply with IS:1709?1984 with latest amendment. The rated voltage 220/240 volts, 50Hz, 1-ph AC the fan assemble should consists of down rod blades, shackle canopies etc and with double ball bearing system. (BEE 5 Star rated - 1200mm sweep) | BI01010001010000000000000515BI0100001260 | 40 | Nos |
150 | 1.33 | Supply and fixing of Exhaust Fans Sweep 300mm, Specially designed metal blade Powder coated metallic finish sturdy steel bird guard\n( Havells , Modle No.- Ventilair Ds ) Catlog -Technology & Beauty that bring winds of change , Page No.- 39 Company Sale Rate - 1940.00/- | BI01010001010000000000000515BI0100001261 | 7 | nos |
151 | 1.331 | Wiring point for exhaust fan with 1.5 sqmm. FRLSH P.V.C. insulatled multistrand core copper conductor cable as earthwire drawn in the conduit complete with 14 SWG copper earth continuity wire, GP box, 15 A piano type switch and ceiling rose on 3 mm thick phenolic laminated bakelite sheet etc complete in all respect including matching colour wash. | BI01010001010000000000000515BI0100001262 | 7 | nos |
152 | 1.332 | Add for Exhaust fan points with modular type switch in place of piano type switch | BI01010001010000000000000515BI0100001263 | 7 | nos |
153 | 1.333 | Wiring point for call-bell with 1.5 sqmm. P.V.C. insulatled single core copper conductor cable in heavy gauge rigid P.V.C. conduit pipe partially laind in slap and partlly conceled in wall complete with 8 SWG GI earth continuity wire, piano type switch a | BI01010001010000000000000515BI0100001264 | 2 | nos |
154 | 1.334 | Add for call bell point with modular type bell push in place piano type bell push | BI01010001010000000000000515BI0100001265 | 2 | nos |
155 | 1.335 | Supply and installations of split direct expansion AC suitable for operation on A/C supply single phase 50Hz 230volts with hermetically sealed compressor with air cooled condensor, motor capacitor and start run capacitor, relay and over load protector internal unit, with one indoor and one outdoor unit. the condensor unit will be placed outside the room on the terrace to avoid noise including standard length of suitable size copper tubing covered with insulation tube (high wall chorded/cordless) suitable capacity 3 core sheathed/ PVC copper cable and a battery operated wireless remote unit. (1.5 TR) (BEE star rated : 5 star, EER 3.4) | BI01010001010000000000000515BI0100001266 | 12 | No. |
156 | 1.336 | Providing and installing 5KVA stabilizer with 20' piping, installation and wall broken | BI01010001010000000000000515BI0100001267 | 12 | No. |
157 | 1.337 | S&F of 40 Amp. D.P. Isolator. (CAT-A) | BI01010001010000000000000515BI0100001268 | 5 | Nos |
158 | 1.338 | Providing, installing, testing and commissioning of solar water heater (ETC type) of 500 litre capacity having 50 no. of tubes of size 1800 x 58 mm. The hot water tank is of grade SS-304, having 50mm PUF of tank insulation. The outer tank is GI power coated. The water heater has complete 2 year warranty and 10 years warranty for solar collector complete in all respect as per direction of Engineer-in-charge. | BI01010001010000000000000515BI0100001269 | 1 | Nos |
159 | 1.339 | RO & WATER CHILLER | BI01010001010000000000000515BI0100001270 | ||
160 | 1.34 | Providing & installing RO having 500 ltr/hp capacity with specifications RO+UV+UF and having TDS reduction upto 90% (TDS upto 3000ppm), double filtration unit and water recovery upto 40-45% all complete as per direction of Engineer in charge. | BI01010001010000000000000515BI0100001271 | 1 | each |
161 | 1.341 | Providing & installing Water chiller tailor with tank of capacity 1000 ltr | BI01010001010000000000000515BI0100001272 | 1 | each |
162 | 1.342 | Centering and shuttering including strutting, propping etc. and removal of form for Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc. | BI01010001010000000000000515BI0100001273 | 714 | each |
163 | 1.343 | Centering and shuttering including strutting, propping etc. and removal of form for Edges of slabs and breaks in floors and walls Under 20 cm wide | BI01010001010000000000000515BI0100001274 | 70 | each |
164 | 1.344 | Extra for Earth work in embankment mechanically compacted to 98% proctor density in ordinary soil, excavation to be done form of regular pits not exceeding 0.5m in depth and work in embankment to be in 20cm layer including ramming and dressing pulverization surfacing including supply of labour, T&P, roller and water sprinkler. | BI01010001010000000000000515BI0100001275 | 277 | cum |
165 | 1.345 | Providing and applying integral crystalline slurry of hydrophilic in nature for waterproofing treatment to the RCC structures like retaining walls of the basement, water tanks, roof slabs, podiums, reservior, sewage & water treatment plant, tunnels / subway and bridge deck etc., prepared by mixing in the ratio of 5 : 2 (5 parts integral crystalline slurry : 2 parts water) for vertical surfaces and 3 : 1 (3 parts integral crystalline slurry : 1 part water) for horizontal surfaces and applying the same from negative (internal) side with the help of synthetic fiber brush. The material shall meet the requirements as specified in ACI212-3R-2010 i.e by reducing permeability of concrete by more than 90% compared with control concrete as per DIN 1048 and resistant to 16 bar hydrostatic pressure on negative side. The crystalline slurry shall be capable of self-healing of cracks up to a width of 0.50mm. The work shall be carried out all complete as per specification and the direction of the engineer-in-charge. The product performance shall carry guarantee for 10 years against any leakage. For vertical surface two coats @ 0.70 kg per sqm | BI01010001010000000000000515BI0100001276 | 52 | sqm |
166 | 2 | INTERIOR WORK | BI01010001010000000000000515BI0100001277 | ||
167 | 2.001 | Providing & fixing plywood 10mm thick (ISI marked) as per specification complete in all respect. (Boards and doors (ISI marked) with water proof and anti termite treated) | BI01010001010000000000000515BI0100001278 | 19 | Sqm. |
168 | 2.002 | Providing & fixing 1mm thick decorative high pressure laminated sheet of plain / wood grain in gloss / matt / suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality. | BI01010001010000000000000515BI0100001279 | 20 | Sqm. |
169 | 2.003 | Providing teak wood beading of size 20 x 45 mm as per specification complete in all respect. | BI01010001010000000000000515BI0100001280 | 66 | Rmt |
170 | 2.004 | Providing aluminium curtain rod having 20mm dia as per specification complete in all respect. | BI01010001010000000000000515BI0100001281 | 45 | Rmt |
171 | 2.005 | Providing curtain rod bracket for 20mm dia as per specification complete in all respect. | BI01010001010000000000000515BI0100001282 | 30 | pair |
172 | 2.006 | Providing and fixing Toughened glass 12mm thickness with side chamfer as specified | BI01010001010000000000000515BI0100001283 | 3 | sqm |
173 | 2.007 | Providing and fixing of Iron Screws, nuts & bolts complete in all respect | BI01010001010000000000000515BI0100001284 | ||
174 | 2.008 | Screws | BI01010001010000000000000515BI0100001285 | ||
175 | 2.009 | 25mm - 200 Nos | BI01010001010000000000000515BI0100001286 | 1 | Nos |
176 | 2.01 | 30mm - 100 Nos | BI01010001010000000000000515BI0100001287 | 1 | Nos |
177 | 2.011 | 35mm - 100 Nos | BI01010001010000000000000515BI0100001288 | 1 | Nos |
178 | 2.012 | 40mm - 100 Nos | BI01010001010000000000000515BI0100001289 | 1 | Nos |
179 | 2.013 | Bolts & nuts | BI01010001010000000000000515BI0100001290 | ||
180 | 2.014 | Upto 13mm dia | BI01010001010000000000000515BI0100001291 | 1 | kg |
181 | 2.015 | Above 13mm dia but upto 18mm | BI01010001010000000000000515BI0100001292 | 1 | kg |
182 | 2.016 | Providing , fixing of Nails (wire galvanized) | BI01010001010000000000000515BI0100001293 | 1 | kg |
183 | 2.017 | Pasting of Fevicol & sand paper with material | BI01010001010000000000000515BI0100001294 | ||
184 | 2.018 | Fevicol SH | BI01010001010000000000000515BI0100001295 | 10 | kg |
185 | 2.019 | Fevicol SR | BI01010001010000000000000515BI0100001296 | 10 | kg |
186 | 2.02 | Sand paper | BI01010001010000000000000515BI0100001297 | 50 | Nos |
187 | 2.021 | Masking tape | BI01010001010000000000000515BI0100001298 | 16.05 | Metre |
188 | 2.022 | Providing 2 seater sofa (Eezy Catelogue, Model No. EEZY 253B, Page no. 3) | BI01010001010000000000000515BI0100001299 | 4 | Nos |
189 | 2.023 | Providing centre table (Eezy Catelogue, Model No. EEZY 312, Page no. 5) Size - 24 x 24 x 18 inch | BI01010001010000000000000515BI0100001300 | 2 | Nos |
190 | 2.024 | Providing Stainless Steel Grade 304 Galvanized table-10 with sitting of 10 persons per table having width of table 2430 x 815 x 750 mm and chair have 300mm width and 485 mm height. Wall thickness of support material for both table and chair is 1mm. The product has 1 year warranty complete in all respect as per direction of Engineer-in-Charge. | BI01010001010000000000000515BI0100001301 | 42 | Nos |
191 | 3 | EXTERNAL ELECTRICAL WORK | BI01010001010000000000000515BI0100001302 | ||
192 | 3.101 | Main LT Panel | BI01010001010000000000000515BI0100001303 | ||
193 | 3.102 | SITC of LT switchgear panels suitable for 433 V, 3 phase, 4 wire, 50 Hz power distribution system. The panel shall be Indoor, free standing, floor mounting, sheet metal clad, cubicle, dead front, dust and vermin proof type compartmentalised design fabricated out of 14 SWG CRCA sheet steel, complete with colour coded, heat shrinkable PVC insulated, aluminium bus bars and separate earth bus bar of adequate cross section through out the length of the panel. The incoming and outgoing feeders shall be accommodated in a fully segregated, modular multitier arrangement with adequate size and distinct cable alley, bus bar alley/chamber. The panel shall be complete with name plate, earthing, numbering, danger plate etc. as per specifications and drawings as required. The panel shall withstand the fault level of 35kA as per Single Line Diagram. The Panel shall also be capable to communicate status like ON/OFF/ Trip through Modbus/Ethernet for major component like ACB, MCCB, MCB & Multifunation meters. | BI01010001010000000000000515BI0100001304 | ||
194 | 3.103 | The Main LT Panel shall use all fix type breakers suitable for 415 V AC, 3 phase, 50 Hz, 3 phase 4 wire supply system. Air Circuit Breakers,microprocessor release for overload, short circuit, instantaneous & earthfault protection with Current & Voltage metering & LCD display & should have capability to communicate ON /OFF/ Trip Status on Modbus/Ethernet and as per the detail specification of ACB (Icu=Ics=Icw=50 kA (1 sec) | BI01010001010000000000000515BI0100001305 | ||
195 | 3.104 | INCOMING | BI01010001010000000000000515BI0100001306 | ||
196 | 3.105 | 1 Nos. 160 Amp FP MCCB 25KA SC/UV/EF | BI01010001010000000000000515BI0100001307 | ||
197 | 3.106 | BUSBARS | BI01010001010000000000000515BI0100001308 | ||
198 | 3.107 | 1 Nos. 200 Amp TPN busbars of COPPER as per SLD. | BI01010001010000000000000515BI0100001309 | ||
199 | 3.108 | OUTGOING | BI01010001010000000000000515BI0100001310 | ||
200 | 3.109 | 1 Nos. 63 Amp FP MCCB 25 kA For Fire Pump | BI01010001010000000000000515BI0100001311 | ||
201 | 3.11 | 5 Nos. 32 Amp FP MCB 10 kA For Light, RO & Spares | BI01010001010000000000000515BI0100001312 | ||
202 | 3.111 | 4 Nos. 63 Amp FP MCB 10 kA For Power, AC, Street Light & Spares | BI01010001010000000000000515BI0100001313 | ||
203 | 3.112 | 3 Nos. 63 Amp FP MCCB 25 Ka Spare | BI01010001010000000000000515BI0100001314 | ||
204 | 3.113 | INSTRUMENTS | BI01010001010000000000000515BI0100001315 | ||
205 | 3.114 | 1 sets of multifunction meter with parameter current,voltage,KWH,KVAH,Power factor on incoming from transformers. Class Accuracy 0.5 with RS485 Port. | BI01010001010000000000000515BI0100001316 | ||
206 | 3.115 | 1 Sets of phase indicating lights (RYB) with protection fuses (one set for each incoming breaker). | BI01010001010000000000000515BI0100001317 | ||
207 | 3.116 | 1 Sets breaker 'ON' & 'OFF' indicating lamp (one set for each incoming breaker). | BI01010001010000000000000515BI0100001318 | ||
208 | 3.117 | 1 Sets auto trip indicating lamp . | BI01010001010000000000000515BI0100001319 | ||
209 | 3.118 | Short Circuit Breaking capacity should not less than 25KA. | BI01010001010000000000000515BI0100001320 | ||
210 | 3.119 | RELAYS AS PER SLD | BI01010001010000000000000515BI0100001321 | 1 | set |
211 | 3.12 | Floor Panel | BI01010001010000000000000515BI0100001322 | ||
212 | 3.121 | The Main LT Panel shall use all fix type breakers suitable for 415 V AC, 3 phase, 50 Hz, 3 phase 4 wire supply system. Air Circuit Breakers,microprocessor release for overload, short circuit, instantaneous & earthfault protection with Current & Voltage metering & LCD display & should have capability to communicate ON /OFF/ Trip Status on Modbus/Ethernet and as per the detail specification of ACB (Icu=Ics=Icw=50 kA (1 sec) | BI01010001010000000000000515BI0100001323 | ||
213 | 3.122 | INCOMING | BI01010001010000000000000515BI0100001324 | ||
214 | 3.123 | 1 Nos. 100 Amp FP MCCB 25KA SC/UV/EF | BI01010001010000000000000515BI0100001325 | ||
215 | 3.124 | BUSBARS | BI01010001010000000000000515BI0100001326 | ||
216 | 3.125 | 1 Nos. 150 Amp TPN busbars of COPPER as per SLD. | BI01010001010000000000000515BI0100001327 | ||
217 | 3.126 | OUTGOING | BI01010001010000000000000515BI0100001328 | ||
218 | 3.127 | 1 Nos. 32 Amp FP MCB 10 kA For Fire Pump | BI01010001010000000000000515BI0100001329 | ||
219 | 3.128 | 2 Nos. 32 Amp FP MCB 10 kA For Light & Spares | BI01010001010000000000000515BI0100001330 | ||
220 | 3.129 | 2 Nos. 63 Amp FP MCB 10 kA For Power & Spares | BI01010001010000000000000515BI0100001331 | ||
221 | 3.13 | INSTRUMENTS | BI01010001010000000000000515BI0100001332 | ||
222 | 3.131 | 1 Sets breaker 'ON' & 'OFF' indicating lamp (one set for each incoming breaker). | BI01010001010000000000000515BI0100001333 | ||
223 | 3.132 | Short Circuit Breaking capacity should not less than 25KA. | BI01010001010000000000000515BI0100001334 | ||
224 | 3.133 | RELAYS AS PER SLD | BI01010001010000000000000515BI0100001335 | 2 | set |
225 | 3.134 | Supply and laying of aluminium conductor PVC insulated armoured served sheathed cables 1100Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S.clamps etc. of suitable size or as directed by the Engineer-Incharge, complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc. | BI01010001010000000000000515BI0100001336 | ||
226 | 3.135 | 6 sqmm 4 core | BI01010001010000000000000515BI0100001337 | 120 | metre |
227 | 3.136 | 10 sqmm 4 core | BI01010001010000000000000515BI0100001338 | 100 | metre |
228 | 3.137 | 16 sqmm 4 core | BI01010001010000000000000515BI0100001339 | 75 | metre |
229 | 3.138 | 95 sqmm 3.5 core | BI01010001010000000000000515BI0100001340 | 75 | metre |
230 | 3.139 | 150 sqmm 3.5 core | BI01010001010000000000000515BI0100001341 | 80 | metre |
231 | 3.14 | Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc. in the existing trench, complete as required. | BI01010001010000000000000515BI0100001342 | ||
232 | 3.141 | 63 mm dia (OD-63 mm & ID-51 mm nominal) | BI01010001010000000000000515BI0100001343 | 100 | metre |
233 | 3.142 | 120 mm dia (OD-120 mm & ID-103 mm nominal) | BI01010001010000000000000515BI0100001344 | 80 | metre |
234 | 3.143 | 160 mm dia (OD-160 mm & ID-135 mm nominal) | BI01010001010000000000000515BI0100001345 | 80 | metre |
235 | 3.144 | Supply & fixing of 7m GI Octagonal Pole of approved make (top dia 70mm, bottom dia 130mm and base plate 12mm thick) having 3mm thickness with single arm bracket (1m length) on RCC foundation including the cost of foundation, foundation bolts, excavation & back filling and required T&P complete in all respect. | BI01010001010000000000000515BI0100001346 | 7 | Nos |
236 | 3.145 | Supply and fixing of LED street light fitting having die cast aluminium body and diffuser with driver set suitable for 90 watt. Conforming to IP 66 protection complete in all respect. CAT-AAA | BI01010001010000000000000515BI0100001347 | 7 | Nos |
237 | 3.146 | Supply and fixing of brass nickle plated compression gland for PVC insulated & armoured served sheathed, underground cable including rubber ring etc. complete in all respect. The armouring of the cable shall be properly connected with the earth as per direction of Engineer-Incharge. | BI01010001010000000000000515BI0100001348 | ||
238 | 3.147 | 6 sq.mm 4 core | BI01010001010000000000000515BI0100001349 | 8 | Nos |
239 | 3.148 | 10 sqmm 4 core | BI01010001010000000000000515BI0100001350 | 8 | Nos |
240 | 3.149 | 16 sqmm 4 core | BI01010001010000000000000515BI0100001351 | 18 | Nos |
241 | 3.15 | 95 sqmm 3.5 core | BI01010001010000000000000515BI0100001352 | 2 | Nos |
242 | 3.151 | 150 sqmm 3.5 core | BI01010001010000000000000515BI0100001353 | 1 | Nos |
243 | 3.152 | Supply and fixing of plain or pin type copper tin plated cable socket (lug) to the cable leads, insulating with tape and making connection, etc. complete in all respect as per direction of the Engineer-in-charge. | BI01010001010000000000000515BI0100001354 | ||
244 | 3.153 | 6 sqmm | BI01010001010000000000000515BI0100001355 | 56 | Nos |
245 | 3.154 | 10 sqmm | BI01010001010000000000000515BI0100001356 | 32 | Nos |
246 | 3.155 | 16 sqmm | BI01010001010000000000000515BI0100001357 | 72 | Nos |
247 | 3.156 | 95 sqmm | BI01010001010000000000000515BI0100001358 | 8 | Nos |
248 | 3.157 | 150 sqmm | BI01010001010000000000000515BI0100001359 | 4 | Nos |
249 | 3.158 | Supply & burring of Safe Earthing Electrode T-19, (Hot Dip Galvanized), length upto 3000mm, outer dia 50mm, inner dia 25 mm, terminal dia 12mm, outer GI pipe of 16 SWG and inner GI pipe of 12 SWG with Hot Dip Galvanization upto 100 micron filled with crystalline conductive mixture (CCM) having anti corrosive & conductive property with 50 kgs activated soil (BFC) capable of reducing the soil resistivity with good mixture of retaining capacity and one earthing lead of 25mm x 3mm GI strip, upto switch board (from apron to switch board, the cost of GI strip will be extra) along with 30 cm square CI frame with hinged cover & masonry housing. Make : As approved in UP PWD & CPRI certified. | BI01010001010000000000000515BI0100001360 | 8 | nos |
250 | 3.159 | Supply and laying of 32 mm X 6 mm G.I. strip from earth electrode diretly in the ground as required complete in all respect. | BI01010001010000000000000515BI0100001361 | 63.63 | nos |
251 | 3.16 | Supply and fixing following capacity of automatic street light cubicle control panel painted with anti corrosive alkali and acid proof paint consisting of time switch TSO 100 series with contactoresm HRC fuses, isolating switch metering instrument & instrument box with CTs etc. in case of TPN, complete in all respect. | BI01010001010000000000000515BI0100001362 | 1 | nos |
252 | 3.161 | Less | BI01010001010000000000000515BI0100001562 | 10 | Percentage |
253 | 3.2 | Installation of Solar Power Plant | BI01010001010000000000000515BI0100001363 | ||
254 | 3.201 | Providing & installating of 25KW solar power plant having battery backup of 6 hrs and inclusive of all system cost and its installation, commissioning, transportation, inssrance, five year AMC/CMC, complete in all respect as per direction of Engineer-in-Charge. (including GST and other taxes) Battery make should be Exide or Amron only (Tubular) | BI01010001010000000000000515BI0100001364 | 12000 | Watt |
255 | 4 | FIRE FIGHTING WORK | BI01010001010000000000000515BI0100001365 | ||
256 | 4.001 | Providing laying, testing & commissioning of 'C' class heavy duty MS Pipe conforming to IS 1239/3589 i/c fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. in ground including welding, excavation & providing cement concrete blocks as supports, anticorrosive treatment with coaltar/asphalt tape as per IS 10221, refilling the trench etc. of following sizes complete as required. Make TATA /SAIL /JINDAL | BI01010001010000000000000515BI0100001366 | ||
257 | 4.002 | 150 mm dia | BI01010001010000000000000515BI0100001367 | 50 | Rmt |
258 | 4.003 | Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required :. Make TATA/SAIL/JINDAL | BI01010001010000000000000515BI0100001368 | ||
259 | 4.004 | 150 mm dia | BI01010001010000000000000515BI0100001369 | 10 | Rmt |
260 | 4.005 | 100 mm dia | BI01010001010000000000000515BI0100001370 | 20 | Rmt |
261 | 4.006 | 65 mm dia | BI01010001010000000000000515BI0100001371 | 15 | Rmt |
262 | 4.007 | 32 mm dia | BI01010001010000000000000515BI0100001372 | 30 | Rmt |
263 | 4.008 | 25 mm dia | BI01010001010000000000000515BI0100001373 | 80 | Rmt |
264 | 4.009 | Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required Make CASTLE/C&R/ADVANCE/KIRLOSKAR | BI01010001010000000000000515BI0100001374 | ||
265 | 4.01 | 150 mm | BI01010001010000000000000515BI0100001375 | 2 | Each |
266 | 4.011 | 100 mm | BI01010001010000000000000515BI0100001376 | 1 | Each |
267 | 4.012 | Providing, installation, testing and commissioning of non-return valve of following sizes confirming to IS: 5312 complete with rubber gasket, GI bolts, nuts, washers etc.as required Make : CASTLE/C&R/ADVANCE/KIRLOSKAR | BI01010001010000000000000515BI0100001377 | ||
268 | 4.013 | 150 mm | BI01010001010000000000000515BI0100001378 | 1 | Each |
269 | 4.014 | 100 mm | BI01010001010000000000000515BI0100001379 | 1 | Each |
270 | 4.015 | Providing, installation, testing and commissioning of stainless steel Y-strainer fabricated out of 1.6 mm thick stainless steel, Grade 304, sheet with 3 mm dia holes with stainless steel flange.Make : DS ENGG/SANT/EMERALD | BI01010001010000000000000515BI0100001380 | ||
271 | 4.016 | 150 mm | BI01010001010000000000000515BI0100001381 | 1 | Each |
272 | 4.017 | 100 mm | BI01010001010000000000000515BI0100001382 | 1 | Each |
273 | 4.018 | Supplying & fixing 63 mm dia gun metal short branch pipe with 20 mm nominal internal diameter size nozzle conforming to IS 903 suitable for instantaneous connection to interconnect hose pipe coupling as required Gun metal Make :NEWAGE/CEASEFIRE/MINIMAX | BI01010001010000000000000515BI0100001383 | 2 | Each |
274 | 4.019 | Supplying and fixing 63 mm dia, 15 m long RRL hose pipe with 63 mm dia male and female couplings duly bound with GI wire, rivets etc. conforming to IS 636 (type-A) as required Gun Metal Make NEWAGE/CEASEFIRE/MINIMAX | BI01010001010000000000000515BI0100001384 | 2 | Each |
275 | 4.02 | Supplying and fixing first-aid 30 mtr Hose Reel with MS construction spray painted in post office red, conforming to IS 884 complete with the following as required. 20 mm nominal internal dia water hose thermoplastic (Textile reinforced) type -2 as per IS: 12585 20 mm nominal internal dia gun metal globe valve & nozzle. Drum and brackets for fixing the equipmets on wall. Connections from riser with 25 mm dia stop gun metal valve & M.S. Pipe and socket. Make EWAGE/CEASEFIRE/MINIMAX | BI01010001010000000000000515BI0100001385 | 2 | Each |
276 | 4.021 | Supplying and fixing of fire brigade connection of cast iron body with gun metal male instantaneous inlet couplings complete with cap and chain as reqd. for suitable dia MS pipe connection conforming to IS 904 as required- 4 WAY Make NEWAGE/CEASEFIRE/MINIMAX | BI01010001010000000000000515BI0100001386 | 1 | Each |
277 | 4.022 | Supplying and fixing air vessel made of 250 mm dia, 8 mm thick MS sheet, 1200 mm in height with air release valve on top and flanged connection to riser, drain arrangement with 25 mm dia gun metal wheel valve with required accessories, pressure gauge and paintingwith synthetic enamel paint of approved shade as required. | BI01010001010000000000000515BI0100001387 | 1 | Each |
278 | 4.023 | Supplying, installation, testing and commissioning of electric driven pressurisation pump at terrace OF 450LPM AT 35MTR HEADsuitable for automatic operation and consisting of following, complete in all respects, as required : (terrace Pump) centrifugal pump of cast iron body and bronze impeller with stainless steel shaft, mechanical seal conforming to IS : 1520. Suitable HP squirell cage induction motor TEFC type suitable for operation on 415 volts, 3 phase 50 Hz AC supply with IP 55 class of protection for enclosure, horizontal foot mounted type with Class-'F' insulation, conforming to IS : 325. M.S.fabricated Common base plate, coupling, coupling guard, foundation bolts etc. as required. Suitable cement concrete foundation duly plastered and with anti vibration pads.. Make MATHER & PLATT/KIRLOSKAR/GRINDFOSS | BI01010001010000000000000515BI0100001388 | 1 | Set |
279 | 4.024 | Fabrication, supply, Insallation testing & commissioning of Electrical control panel of cubical construction, floor mounted type, fabricated out of 2mm thick CRCA sheet, compartmentalised with hinged lockable doors, dust and vermin proof, powder coated of approved shade after 7 tank treatment process, cable alley, interconnection with suitable size copper conductor cable/solid copper strip, having switchgears and accessories, mountings and internal wiring, earth terminals, numbering etc. complete in all respect, suitable for main fire pump, pressurisation pump & diesel pump set complete as per CPWD specification with following in coming and Outgoings, suitable for operation on 415V, 3 phase, 50Hz Ac Supply with enclosure protection class IP 42 as required MAKE-ALLIED ENGINEERS/MAK ENGINEERS/CPRI APPROVED | BI01010001010000000000000515BI0100001389 | ||
280 | 4.025 | Incomings\n250A, 50kA 4 Pole MCCB, Ics=100% Icu rating Digital Voltmeter 0-500V with selector switch Digital Ammeter (0-250 A) with selector swtich & CTs etc. LED type RYB phase indicating lamps, ON, OFF, trip indicating lamps Set of Copper Bus Bar 300A\nOutgoings\n( Note : All outgoing feeders for pumps should have digital Ammeter with selector switches, and LED type ON, OFF, trip indicating lamps)\nMain Fire Pump\n125 A, 50kA TPN MCCB, Ics=100% Icu, with fully automatic Star/Delta starter suitable for 60 HP pump with overload protection, current sensing type single phase preventor complete with all acceessories and internal wiring required for automatic operation, selector switch for local/remote, auto/manual/OFF operation.\nJockey Pump\n63 A, 50kA TPN MCCB, Ics=100% Icu, with suitable HP fully automatic Star/Delta starter with overload protection, current sensing type single phase preventor complete with all acceessories and internal wiring required for automatic operation, selector switch for local/remote, auto/manual/OFF operation. | BI01010001010000000000000515BI0100001390 | ||
281 | 4.026 | Diesel Engine Control\nControl for diesel engine comprising -\nAutomatic/Manual selctor switch & 3 attempts starting device, timers and relays as required, push buttons, start/stop in manual mode Indicating lamp for high/ Low Lub. Oil pressure, High Water Temp and Engine on indication Battery charger suitbale for 12V/24 V DC with boost and trickle selector switch, 0-30 V DC volt meter, and 0-20 A DC Ammeter All standard relays and accessories for automatic operation of diesel engine\nSystem Controller\nDesigning, Supply, Installation, Testing and commissioning of system controller to control operation of main electric fire pump, diesel pump, Pressurization pump, Terrace pump in sequence as per specification consisting of relays, timers. Sensors, annunciation window for fault indication, complete as per specifications | BI01010001010000000000000515BI0100001391 | 1 | Each |
282 | 4.027 | Providing & fixing of pressure switch in M.S. pipe line including connection etc. as required. | BI01010001010000000000000515BI0100001392 | 1 | Each |
283 | 4.028 | Providing & fixing flow switch in following sizes M.S. pipe including connection etc as required.-100 mm dia | BI01010001010000000000000515BI0100001393 | 1 | Each |
284 | 4.029 | Supply and laying of aluminium conductor PVC insulated armoured served sheathed cables 1100Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S.clamps etc. of suitable size or as directed by the Engineer-Incharge, complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc. Make : Rallision/ Polycab/ Gloster/ National/ Universal/ Havells or Equivalent | BI01010001010000000000000515BI0100001394 | ||
285 | 4.03 | 70 sq. mm 3.5 core from main panel to starter | BI01010001010000000000000515BI0100001395 | 50 | Rmt |
286 | 4.031 | 16 sq. mm 4 core from main panel to starter | BI01010001010000000000000515BI0100001396 | 90 | Rmt |
287 | 4.032 | Supply and wiring of submain with two number 2.5 sq. mm FR P.V.C. insulated 1100 V grade multistrand single core copper conductor cable in 20mm dia heavy duty 2mm thick PVC conduit partly concled in wall and partly laid in slab along with Reinforcement before concreting with one no. 14 SWG GI earth contunity wire including colour wash etc. Completed in all Respects. Make : Rallision/ Polycab/ loster/ National/ Universal/ Havells or Equivalent | BI01010001010000000000000515BI0100001397 | 100 | Rmt |
288 | 4.033 | Supplying and fixing of fire brigade connection of cast iron body with gun metal male instantaneous inlet couplings complete with cap and chain as reqd. for suitable dia MS pipe connection conforming to IS 904 as required : 2 way-100 mm dia M.S. Pipe | BI01010001010000000000000515BI0100001398 | 1 | Each |
289 | 4.034 | Providing, fixing, testing & commissioning of 15mm dia quartzoid bulb type sprinklers of rating 68 degree centigrade with required accessories. Make Newage/Tyco/MINIMAX | BI01010001010000000000000515BI0100001399 | ||
290 | 4.035 | Pendent type | BI01010001010000000000000515BI0100001400 | 40 | Nos. |
291 | 4.036 | upright sprinkler | BI01010001010000000000000515BI0100001401 | 15 | Nos. |
292 | 4.037 | Supplying, installation, testing & commissioning of sprinkler flexible pipe (UL Listed) of stainless steel complete with 15 NPT on reducer thread with maximum working pressure of 175 PSI test pressure of 875 PSI (Burst) with branch line (Inlet) 25mm NPT male thread to sprinkler head (Outlet) 15mm NPT female thread with reducer, nipple, 2 side brackets, center bracket, stockbar of following sizes complete as required. 1000mm | BI01010001010000000000000515BI0100001402 | 10 | Nos. |
293 | 4.038 | Providing, fixing, testing & commissioning of installation control valve of cast iron body, brass/bronze working parts comprising of water motor alarm, bronze seat clapper, clapper arm and hydraulically driven mechanical gong bell to sound continuous alarm when the wet riser/sprinkler system activates, pressure gauges, emergency releases, strainer, pressure switch, cock valve complete with drain valve and bypass, test control box, ball valves, MS pipe of required size, flanges, orifice plate, gasket etc of follwing sizes as required MAKE- TYCO/MINIMAX/CEASEFIRE. (Pressure etc. to complete the system as required) | BI01010001010000000000000515BI0100001403 | 1 | Nos. |
294 | 4.039 | SITC of fire extinguisher | BI01010001010000000000000515BI0100001404 | ||
295 | 4.04 | Supply and fixing of fire extinguisher, ABC Type 4.00kg capacity (ISI marked IS : 15683 & TAC approved) complete with initial charge and wall bracket, along with supply of all materials and labour for proper completion of work. | BI01010001010000000000000515BI0100001405 | 8 | Nos. |
296 | 4.041 | Supply and fixing of fire bucket, round bottom made of GI sheet 9-11 litres capacity duly painted as per fire brigade design, supported on hanging bracket chained amd locked, initially filledwith fine river sand, water as per direction of Engineer-in-charge. | BI01010001010000000000000515BI0100001406 | 2 | Nos. |
297 | 4.042 | Supplying, installation, testing & commissioning of smoke detector with builtin LED and mounting base complete with all connections etc. as required. | BI01010001010000000000000515BI0100001407 | 4 | Each |
298 | 4.043 | Supplying, installation, testing & commissioning of heat detector operating at 54ºC/57ºC with rate of rise cum fixed temperature (dual thermistor) type with mounting base complete with all connection etc. as required. | BI01010001010000000000000515BI0100001408 | 4 | Each |
299 | 4.044 | Supplying, installation, testing & commissioning fire alarm sounder with facility to make announcement, mounted in M.S. box (16 SWG) with hinged cover plate & suitable for operation with amplifier i/c line matching transformer etc. complete as required. | BI01010001010000000000000515BI0100001409 | 2 | Each |
300 | 4.045 | Supplying, installation, testing & commissioning of fault isolator complete with base as required. | BI01010001010000000000000515BI0100001410 | 1 | Each |
301 | 4.046 | Supplying, installation, testing & commissioning of fire fighter phone jack complete as required. | BI01010001010000000000000515BI0100001411 | 1 | Each |
302 | 4.047 | Supplying, installation, testing & commissioning of fire fighter telephone handset complete as required. | BI01010001010000000000000515BI0100001412 | 1 | Each |
303 | 4.048 | Supplying, installation, testing & commissioning of addressable phone control module complete as required. | BI01010001010000000000000515BI0100001413 | 1 | Each |
304 | 4.049 | Supplying and drawing of cable Fire Retardant PVC insulated copper conductor cable in the existing surface / recessed steel conduit of following pairs, cores and size including connections and interconnections etc. as required. speaker cable Two pair, 2-core, 1.5 sqmm | BI01010001010000000000000515BI0100001414 | 56 | RM |
305 | 4.05 | Supplying and drawing following pair 0.5 mm dia FRLS PVC insulated annealed copper conductor, unarmored telephone cable in the existing surface/ recessed steel/ PVC conduit as required. 2 Pair | BI01010001010000000000000515BI0100001415 | 71 | RM |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail