}

Accessible India Campaign In Sub Tehsil Building Kalanaur In Rohtak Distt . , Kalanaur-Haryana

Public Works Department-PWD has published Accessible India Campaign In Sub Tehsil Building Kalanaur In Rohtak Distt . . Submission Date for this Tender is 27-01-2021. Training Service Tenders in Kalanaur Haryana. Bidders can get complete Tender details and download the document.




Tender Notice

26500694
Accessible India Campaign In Sub Tehsil Building Kalanaur In Rohtak Distt .
Open Tender
Indian
Haryana
Kalanaur
27-01-2021

Tender Details

Accessible India Campaign In Sub Tehsil Building Kalanaur In Rohtak Distt .

Key Value

Document Fees
INR 5000 /-
EMD
INR 62000.0 /-
Tender Value
INR 30.98 Lakhs /-

BOQ Items

Name of Work: Accessible India Campaign in Sub Tehsil building at Kalanaur in Rohtak District.
Sl. No. Item Description Item Code / Make Quantity Units
1 1 HSR items\nEarth work in excavation in foundations, trenches, etc. in all kinds of soils, not exceeding 2 metres depth including dressing of bottom and sides of trenches, stacking the excavated soil, clear from the edge of excavation and subsequent filling around masonry, in 15cm layers with compaction, including disposal of all surplus soil, as directed within a lead of 30 metres. (HSR 6.6) 25.51 Cum
2 2 Earth filling under floors with surplus soil, excavated from foundation and taken only from outside the building plinth, in 15 cm layers, including ramming watering and consolidating lead upto 30 metres. (HSR 6.13 (a) 12.75 Cum
3 3 Dismantling Concrete. (d) cement concrete plain 1:2:4 mi. (HSR 8.6 (d) 12.97 Cum
4 4 Cement concrete 1 : 8 : 16 with brick ballast 40 mm nminal size in foundation and plinth. (HSR 10.30) 0.27 Cum
5 5 Cement concrete 1 : 4 : 8 with stone aggregate 20mm Nominal size in foundation and plinth. (HSR 10.38) 2.55 Cum
6 6 Cement concrete 1 : 3 : 6 with stone aggregate 20 mm Nominal size in foundation and plinth. (HSR 10.40) 4.29 Cum
7 7 Cement concrete 1:2:4 with stone aggregate 20mm nominal size in first storey upto 4 metres above plinth level. (HSR 10.59) 7.64 Cum
8 8 Cement concrete 1:1.5:3 with stone aggregate 20mm nominal size for reinforced concrete work in shelves excluding steel reinforcement, but including centring and shuttering, laid in position, complete in all respect. (HSR 10.81 + 10.95 (a) 1:11/2:3 mix is used, instead of 1:2:4. 0.04 Cum
9 9 Cement concrete 1:1.5:3 with stone aggregate 20mm nominal size for reinforced concrete work in slabs with inclination not exceeding 25 degree with horizontal, excluding steel reinforcement, but including centring and shuttering, laid in position, complete in all respect. (HSR 10.82 + 10.95 (a) 1:11/2:3 mix is used, instead of 1:2:4. 3.78 Cum
10 10 Damp proof course 40 mm thick of cement concrete 1:2:4 using stone aggregate with 2 coats of bitumen 20/30 penetration, at 1.65 kg per sqm laid hot and sanded. (HSR 10.114) 7.04 Sqm
11 11 Cement concrete 1:2:4 with stone aggregate 20mm nominal size in pavements, roads, taxi-tracks and runways, laid to required slope and camber, including consolidation, finishing and tamping complete. (HSR 10.132) 0.27 Cum
12 12 First class brick work laid in cement sand mortar 1:6 in foundation and plinth. (HSR 11.2) 12.53 Cum
13 13 First class brick work laid in cement sand mortar 1:6 in first storey upto 4 metres above plinth level. (HSR 11.7) 21.58 Cum
14 14 Terracing consisting of tiles 22.86cm x 11.43cm x 3.81cm, laid over 87.50mm mud filling on a layer of 25mm mud plaster and another layer of mud mortar for laying the tiles, including two coats of bitumen laid hot at 1.65 Kg per Sqm on top of R.C.C. slab including grouting with cement sand mortar 1:3 and top surface to be left clean etc. (HSR 13.13) 34.48 Sqm
15 15 Top khurra 0.6m x 0.6m for rain water pipe in 25mm thick cement concrete 1:2:4 over 50mm thick cement concrete 1:8:16. (HSR 13.50) 2 Nos.
16 16 Bottom khurra on ground 1.2m x 0.6m consisting of brick-on-edge laid in cement mortar 1:3 over 75mm cement concrete 1:8:16 including 12mm thick cement plaster 1:3. (HSR 13.57) 2 Nos.
17 17 Cement concrete 1:2:4 gola 10cm x 10cm quardrant along junction of roof with parapet wall finished smooth, where specially specified. (HSR 13.64) 23.77 Mtr.
18 18 Providing & fixing PVC Rainwater Pipe 6 kg. pressure of ISI mark in cement mortar during masonry work. (b) 150mm dia PVC pipe 6 kg. pressure (Note:- Reputed make PVC Pipe such as Supreme, Finolex, Prince will be used as approved by Engineer-in-charge. (HSR 13.89 (b)\nNote:- The Agency to whom the work is alloted will have to produce original bill/voucher for all quantity in token of proof of purchase of material. 5.49 Mtr.
19 19 Providing and fixing PVC Bend ISI mark. (b) 150mm dia PVC Bend (Note:- Reputed make PVC Bend such as Supreme, Finolex, Prince will be used as approved by Engineer-in-charge. (HSR 13.90 (b)\nNote:- The Agency to whom the work is alloted will have to produce original bill/voucher for all quantity in token of proof of purchase of material. 2 Nos.
20 20 Base course of floors consisting of 100mm thick cement concrete 1:8:16 and 100mm sand or stone filling. (HSR 14.1) 24.7 Sqm
21 21 Providing & fixing 1st quality ceramic tiles/ anti skid tile of size 400mm x 400mm of approved make in flooring laid in any pattern as specified over base of 20mm thick cement coarse sand mortar 1:3 and jointed with white cement slurry mixed with pigment to match the shade to tiles. \nNote: - Tile shall be premium quality (first quality) of reputed manufacturer like NITCO, KAJARIA, SOMANI, ORIENT BELL, JOHNSON, RAK AND SIMPOLO. (HSR 14.91)\nNote:- The Agency to whom the work is allotted will have to produce original bill/voucher for all quantity in token of proof of purchase of material. 24.7 Sqm
22 22 Providing & fixing 1st quality ceramic glazed wall tiles confirming to I.S. 15622 (thickness to be specified by the manufacturer) of approved make in all colors, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12mm thick bed of cement mortar 1:3 coarse and jointed with grey cement slurry, including pointing in white cement mixed with pigment of matching shades complete. (b) Size of ceramic Glazed Tiles 300 x 450mm of reputed manufacturer like: - RAK, NITCO, KAJARIA shall be used as approved by Engineer-in-charge. (HSR 14.92 (b)\nNote: - The agency to whom the work is allotted will have to produce original bill/ voucher for all quantity in token of proof of purchase of material. 72.56 Sqm
23 23 12mm thick cement plaster 1:6. (HSR 15.7) 42.95 Sqm
24 24 15mm thick cement plaster 1:6 on the rough side of single of half brick wall. (HSR 15.12) 54.55 Sqm
25 25 Plastering on under side of ceiling 10mm thick cement plaster 1:4. (HSR 15.52) 29.78 Sqm
26 26 Applying priming coat with cement primer in all shades on newly plastered or concrete exterior surfaces. (Note:- First quality paint of reputed make firm such as Goodlass-Nerolac, Berger, Garware, Jenson, Nicholson, Asian & Shalimar Shall be used as approved by Engineer-in-charge in writing, Drum of paint shall be opened in presence of Engineer-in-charge). (HSR 16.25) 72.73 Sqm
27 27 Distempering with washable oil bound distemper (of approved manufacture) two coats over one priming coat on new work. (Note:- First quality paint of reputed make firm such as Goodlass-Nerolac, Berger, Garware, Jenson, Nicholson, Asian & Shalimar Shall be used as approved by Engineer-in-charge in writing, Drum of paint shall be opened in presence of Engineer-in-charge). (HSR 16.58) 72.73 Sqm
28 28 Providing two coats of exterior acrylic emulsion paint. (Note:- First quality paint of reputed make firm such as Goodlass-Nerolac, Berger, Garware, Jenson, Nicholson, Asian & Shalimar Shall be used as approved by Engineer-in-charge in writing, Drum of paint shall be opened in presence of Engineer-in-charge). (b) 1st Quality. (HSR 16.79 (b) 54.55 Sqm
29 29 Providing and fixing flat pressed singled Or 3 layers particle board of B.W.R. grade (medium density) in plain lining butt jointed, including wooden plugs (Teak), placed at 45 cm to 60 cm centres, complete with necessary nails (frame work shall be payable extra)- (a) 25mm thick. (HSR 17.48 (a) + Note-I 23.78 Sqm
30 30 Providing and fixing 12mm thick prelaminated particle board flat pressed three layer or graded wood particle board confirming to IS; 12823 grade 1 type II in panelling fixed in aluminium doors. Windows shutters and partition frames with C.P. brass/ stainless steel screws etc. complete. (b) Pre-laminated particle board with decorative lamination on both sides. (HSR 17.97 (b) 9.23 Sqm
31 31 Providing & fixing aluminium round shape handle of oputer dia 100mm with screws etc. complete. (iii) Polyester powder coated minimum thickness 50micron aluminium. (HSR 17.102 (iii) 12 Nos.
32 32 Steel reinforcement TMT bars FE-500 EQR/FE-500 D grade or more for RCC work, where no included in the complete rate of RCC including straightening, bending, binding, wastage, overlaps, welded joints, spacer bars, chairs, stays, hangers and annealed steel wire etc. and placing in position complete in all respects for all heights/ depths/ storeys/ basements etc. (HSR 18.22)\nNote:- Reinforcement shall be measured in length including hooks, if any, separately for different diameters as actually used in work, excluding overlaps, Wastage, overlaps, couplings, welded joints, spacer bars, chairs, stays, hangers and annealed steel wire or other methods for binding and placing shall not be measured and cost of these items shall be deemed to be included in the rates for reinforcement. 5.73 Qtl.
33 33 Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). (DSR 10.28) 1436 Kg.
34 34 NS items\nProviding and fixing coloured self addhesive PU-Tactile tile, ground surface indicators (made of Polyurethane) of size 300mmx300mm for guiding/direction/warning to the visually impaired visitors in the centre/side of the pedstrain/approach pathway as per design/specification and guidelines complete in all respect to the entire satisfaction of Engineer-in-charge. Note:- The tile shall be premium quality (1st quality) of reputed manufacture like NITCO, KAJARIA, SOMANI, ORIENT BELL & JONHONSONS. (NS) 1097.36 Sft
35 35 Providing and fixing coloured ceremic (Tactile) tile, ground surface indicators of size 300 x 300mm of approved make for guiding/direction/warning to the visually impaired visitors, in the centre/side of the pedstrain/approach pathway as specified over base of 20mm thick cement coarse sand mortar 1:3 and jointed with white cement slurry mixed with pigment to match the shade to tiles as per design/specification and guidelines complete in all respect to the entire satisfaction of Engineer-in-charge.\nNote: - The tile shall be premium quality (1st quality) of reputed manufacturer like NITCO, KAJARIA, SOMANI, ORIENT & JONHONSONS (NS) 199.49 Sft
36 36 Providing and fixing of acrylic, non-glare, tactile audio pictorial building layout as per the approved size, design and make, having 6mm thick acrylic non glare base plate of the approved color and non-glare acrylic cut out symbols and upper case Sans Serif letters of 12mm height, raised 3mm above base plate and Grade 2/ Grade 1 Braille to be integral with the sign face and be raised 0.5mm above base plate. The map to be installed at the specified location as per accessibility standards, shall be oriented to the position of the viewer and to be installed at a height of 800 mm from the finished ground/ floor level and using the necessary hardware specified by the manufacturer and to be installed up to the height of 800 mm from the finished ground/ floor level and using the necessary hardware specified by the manufacturer and to be installed complete as per design/specificaitons and guidelines as per the entire satisfaction of the the Engineer-in-charge (NS) 2 each
37 37 Providing and fixing Multilingual and tactile Emergency evacuation map of each floor indicating the current position of the viewer saying "YOU ARE HERE" of 15mm height letters in red with white background, indicating the emergency exits, locations of fire extinguishers etc. Signs shall have a solid header with the text “EVACUATION PLAN” in contrasting uppercase letters no less than 3/4" in height. The size of the board shall be 2ft x 2ft and shall be installed at a height of 1200mm from FFL and shall be oriented to the position of the viewer as per the direction of the site engineer complete as per design/specificaitons and guidelines as per the entire satisfaction of the the Engineer-in-charge (NS) 6 each
38 38 Providing and fixing of SS, non-glare multilingual Braille (raised dots) ENTRANCE SIGNAGE (size 1 ft x 1 ft) as per the approved design and make, indicating the name of the building having 1.2mm thick SS non glare blue colored base plate with the 'Universal Accessibility Symbol' and Upper case Sans Serif words of height 15mm engraved on it along with the equivalent word/ s written in Hindi using Devanagari script of height 15mm in white color Grade 2/ Grade 1 Braille to be etched/ engraved and be raised 0.5mm above base plate. The signage to be installed at the specified location on the compound wall near the site entrance gate installed at a height of 1200 mm from the finished ground/ floor level, using the necessary hardware specified by the manufacturer and to be installed complete as per design/specificaitons and guidelines as per the entire satisfaction of the the Engineer-in-charge (NS) 4 each
39 39 Providing and fiixing acrylic multilingual Braille (raised dots) DIRECTIONAL SIGNBOARDS of size 6" x 9" designed as per accessibility standards and having 4mm thick acrylic base plate with Upper Case San Serif words made of white acrylic non glare cut out letters of height 15mm raised not less than 0.8mm above base plate and the equivalent word written in Hindi with Devanagari non glare acrylic letters of height 15mm raised not less than 0.8mm above base plate and having a non-glare acrylic cut arrow pointing in the required direction. Each signboard to be fixed as per manufacturers specifications on the wall at the approved location and at a height of 1200mm from FFL complete as per design/specificaitons and guidelines as per the entire satisfaction of the the Engineer-in-charge (NS) 20 each
40 40 Providing and fixing acrylic multilingual Braille (raised dots) signboards (DOOR SIGNBOARDS) of size 6"x 9" for room titles, designed as per the drawings issued and having 4mm thick blue acrylic base plate with Upper Case San Serif words made of white acrylic non glare cut out letters of height 15mm raised not less than 0.8mm above base plate and the equivalent word/s written in Hindi with Devanagari non glare acrylic letters of height 15mm raised not less than 0.8mm above base plate. Grade 2/ Grade 1 Braille to be integral with the sign face and be raised 0.5mm above base plate. Each signboard to be fixed as per manufacturers specifications on the wall adjoining the respective room door at a height of 1200mm from FFL complete as per design/specificaitons and guidelines as per the entire satisfaction of the the Engineer-in-charge (NS) 29 each
41 41 Providing and fixing of SS, non-glare Signage board (2 ft. x 2 ft.- 1 no.) for the accessible parking, as per the approved design and make, having 1.2mm thick SS non glare base plate and Grade 2/Grade 1 Braille (raised dots)to be etched/engraved and be raised 0.5mm above base plate and Upper Case San Serif words and Universal Accessibility Symbol to be etched/engraved and signage to be installed at a height of 2100mm from the ground level using a post of MS hollow square section (50mm x 50mm) as per the installation procedure specified by the manufacturer and as per accessibility standards complete as per design/specificaitons and guidelines as per the entire satisfaction of the the Engineer-in-charge (NS) 3 each
42 42 Providing and laying road marking with Hot Applied Thermoplastic Compound with Reflectorizing Glass Beads on Bituminous Surface- Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorizing glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC: 35 .The finished surface to be level, uniform and free from streaks and holes complete in all respect to the entire satisfaction of Engineer-in-charge (NS) 18.75 Sqm
43 43 Providing and fixing 2mm DND plane profile sheet of any single colour UV stablized material, with 1" x 1" MS pipe coating geage welding job work, canon fastner, Asian Paint & Primer, Fastner & complete job work etc. (size of block 2'x2') and fitting of sheet & water proofing complete in all respect to the entire satisfaction of Engineer-in-Charge of work (NS) 4200 Sft
44 44 Providing 3" Round Support Pipe and Plate complete in all respect to the entire satisfaction of Engineer-in-Charge of work (NS) 720 Rft
45 45 Providing and fixing 50mm wide colour contrast 'EDGE STRIPS' self addhesive on treads of stair cases to help people with visual diabilities and elederly even in dim light condition complete in all respect to the entire satisfaction of Engineer-in-charge (NS) 42.98 Rmt
46 46 Providing and fixing of high intensity reflective conspicuity tape 25 to 50mm width, on edges of treads in staircase including, cutting, pasting etc. of make 3M or equivalent brand complete in all respect to the entire satisfaction of Engineer-in-charge (NS) 42.98 Rmt
47 47 Providing and fixing acrylic Aluminium/ Braille indicators of size 170mm x 35mm for handrails of the approved design and make having Braille dots raised 0.5mm above base plate, to be installed at the specified locations as per the directions of the engineer in charge complete as per design/specificaitons and guidelines as per the entire satisfaction of the the Engineer-in-charge (NS) 10 each
48 48 Earth work non plastic or Tibba Sand under floors taken from outside of campus area with all lead and lift including loading, unloading, laid in 15cm layer including ramming, watering, consolidating, compaction and compensation of earth etc., complete in all respect as per the direction of Engineer-in-Charge. (NS) 27.21 Cum
49 49 Providing and fixing 'L' shaped 'Grab Bar' 600mm long and 30mm-40mm thick diameter of 18-gauge made up of 'stainless steel' of International Standard in the toilets to make them 'Unisex Toilet' for visually impaired visitors as per design / specification and guidelines complete in all respect to the entire satisfaction of Engineer-in-charge (NS) 2 Nos.
50 50 Providing and fixing 'U' shaped 'Flip Bar' 650mm long and 30mm-40mm thick diameter of 18-gauge with hinge made up of 'stainless steel' of International Standard in the toilets to make them 'Unisex Toilet' for visually impaired visitors as per design / specification and guidelines complete in all respect to the entire satisfaction of Engineer-in-charge (NS) 2 Nos.
51 51 OVERHEAD SIGNS: - Providing and errecting overhead signs including gantry using non-metallic micro prismatic retro reflective sheet conforming to IRC: 67-2012 Type IV specification fixed on 4mm thick Aluminium Composite Panels as base board with pressure-sensitive adhesive having 0.5mm thick Aluminium on both side supported by M.S. Pipe Structure complete as per drawings, Technical specification and as directed by Engineer-in-Charge. (NS)\nCantilever Overhead Sign (Single sided) including gantry - sheet on one face (T/L Shaped) Size 5000x1500. 1 No.
52 52 P.H. Civil\nProviding & fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. Internal Work - Exposed on Wall. (DSR 18.10)
53 53 (i) 15 mm internal diameter of pipeline 10 Mtr.
54 54 (ii) 20 mm internal diameter of pipeline 20 Mtr.
55 55 Providing & fixing gun metal gate valve with C.I. Whel of approved quality (Screwed end). (DSR 18.17)
56 56 (ii) 20 mm internal diameter of pipeline 2 Nos.
57 57 Providing & fixing G.I. Union in G.I. pipe including cutting and threading the pipe making long screws etc. complete (New Work). (DSR 18.46)
58 58 (i) 15 mm internal diameter of pipeline 2 Nos.
59 59 (ii) 20 mm internal diameter of pipeline 3 Nos.
60 60 Cutting holes upto 23cm square through brick work in mud walls for pipes and making good including repointing replastring and finishing according to existing finish where required. (HSR 28.23)
61 61 (a) 11.43cm thickness of walls. 2 Nos.
62 62 (b) 22.86cm thickness of walls. 3 Nos.
63 63 Constructing brick masonry inspection chamber sizes as given below upto 0.60 meters average depth in cement mortar 1:5 lime concrete with 40 percent lime mortar 2:3 in foundation cement concrete 1:2:4 benching 12mm thick cement plaster 1:2 with a floating coat of 1 mm thick of neat cement RCC 1:2:4 slab 100mm thick/C.C. topping 50mm thick with 455mm x 455mm / 455mm x 610mm inside light duty C.I inspection chamber cover and frame weight as per I.S.I specification painted with 3 coats of black bitumastic superior paint complete as per standard design. (a) Size 450mm x 450mm inside (with 455mm x 455mm cover and frame light duty single seal weighing 40 kg with C.C. topping). (HSR 29.84 (a) 2 Nos.
64 64 PROVIDING AND FIXING IN POSITION BEST INDIAN MAKE ANGLO INDIAN WATER CLOSET SUIT (as approved by the Engineer-in-charge) consisting of:- (i) Wash down closet set VITREOUS CHINA WARE (to the approval of the Engineer-in-charge) WITH,’P’ OR ‘S’ TRAP WITH or without vent as required and Suitable joint for closet inlet;. (ii) One piece SEAT AND LID IN HOLLOWBLACK OR WHITE PLASTIC fitted with chromium plated brass Hinges and rubber buffers; (to the approval of the Engineer-in-charge). (iii) 12.5 LITRES capacity mosquito proof C.I. FLUSHING CISTERN of best Indian make and all other necessary Fittings complete as fully described in item no.30.1 above;. (iv) 32 MM DIAMETER TELESCOPIC 1.25 MM THICK GALVANIZED inside and outside STEEL FLUSH PIPE with clips;COMPLETE in all respects INCLUDING CUTTING AND MAKING. (i) White. (HSR 30.3 (i) 4 Nos.
65 65 Providing and fixing in position best Indian make (as approved by the Engineer-in-charge) European type water closet suite, Syphonic type, Consisting of- (i) Vitreous chinaware Syphonic Suite with 15 litres capacity matching chinaware cistern and all internal brass fittings complete with ‘P’ or ‘S’ trap with or without vent (as approved by the Engineer-in-charge). (ii) One piece Seat and lid in hollow black or white plastic fitted with chromium plated hinges and rubber buffers, (to the approval of the Engineer-in-charge). complete in all respects including cutting and making good the walls and floors. (a) Single trap symphonic W.C. Suite. (i) White. (HSR 30.5 (a) (i) 4 Nos.
66 66 Extra over item nos. 30.3 to 30.6 for providing and fixing best Indian make plastic Hygenic seat with lid complete instead of hollow Black or white plaster seat and lid. (i) White plastic seat (Solid). (HSR 30.13 (i) 4 Nos.
67 67 Providing and fixing in position Indian make (Ordinary) Lavatory Suites Consisting of Lavatory in Vitreous China Ware size as given Below (to the approval of the Engineer-in-charge) including china plug for tap hole where necessary; R.S or C.I Brackets for building into wall including Painting; 32mm C.P Brass Waster with C.P brass chain and rubber plug; 15mm C.P Brass Screw down pillar tap with Jamnuts or couplings best design (as approved by the Engineer- In-charge). All fittings best Indian make and to the approval of the Engineer-in-charge. All brass work chromium plated and complete in all respects including cutting and making good the walls floors and painting of fittings etc. (a) White. (iv) Size 550 mm x 400 mm with one no. Tap. (HSR 30.41 (a) (iv) 7 Nos.
68 68 Providing and fixing in position best Indian make Soap dish fixed into wall with C.P brass screws and complete in all respects including cutting and making good the wells etcs. (a) C.P Brass. (i) Soap dish 160mm. (HSR 30.70 (a) (i) 1 No.
69 69 Providing and fixing in position best Indian make bevelled edge 5.5mm thick Mirror mounted on Asbestos sheet ground fixed in position by means of 4 Nos. chormium plated brass screws and washers over rubber washers and rawl plug embedded in the wall or chromium plated brass clamps with C.P brass screws (as required by the Engineer-in-charge) complete including cutting and making good the walls etc. (a) Indian make. (i) 600mm x 450mm. (HSR 30.71 (a) (i) 1 No.
70 70 Providing and fixing in position 15mm i/d C.P brass bib Cocks of best quality (as required by the Engineer-in-charge). (HSR 30.75)
71 71 (a) Bib cock long body 1 No.
72 72 (c) Bib cock. 1 No.
73 73 Providing and fixing in position C.P brass stop cocks (as Approved by the Engineer-in-charge). (a) 15 mm Stop cock. (i) Stop cock male and female end (HSR 30.76 (a) (i) 2 Nos.
74 74 Providing and fixing in position best Indian make flexible tube connection. (b) C.P. Brass (ii) 15 mm x 375 mm. (HSR 30.82 (b) (ii) 2 Nos.
75 75 Providing and fixing HDPE Water Storage Tanks of Sintex, Diplast, O.K. supreme make with covers/ lids marked with IS: 12701 on roof top of buildings including cost of hoisting and placing in position, making connections with inlet and outlet pipes, providing overflow & scour provisions with suitable plug on scour pipe including cost of nipples, washers, flanges for connections in tanks complete in all respect to the satisfaction of Engineer-in-Charge. (except civil work). (c) 500 Ltr. Capacity. (HSR 30.119 (c) 1 No.
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail