Military Engineer Services-MES has published Repair To Misc Wooden/Steel Furniture Items And Polishing/Painting Of Furniture For Charduar Area Under Ge ( N ) Tezpur. Submission Date for this Tender is 30-01-2021. Paint Supply Tenders in GE (N) Tezpur Assam. Bidders can get complete Tender details and download the document.
Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
1 | 23-Jan-2021 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 30-01-2021 |
Name of Work: Repair to misc wooden/Steel furniture items and polishing/painting of furniture for Charduar area under GE (N) Tezpur | |||||
---|---|---|---|---|---|
Sl. No. | Item Description | Item Code / Make | Quantity | Units | |
1 | 0 | Note 1: (Applicable for all parts/items) : The bidders/contractors are advised to read tender document, all drawings & all corrigendum/amendments and general condition of contracts before entry/quoting the rates.\nNote 2:- Attention to bidder is hereby invited to upload revised BOQ if published during their bid submission. Uploading of incorrect/ pre-revised BOQ shall be treated as non bonafide and rejected. Fixed credit has been given in technical documents which shall be taken into account during acceptance of bid/tender. | |||
2 | 1 | Chair Dining :- M & L for removing of the following UNSV parts from chair dining and S&F new parts made out of well seasoned Ist class hard wood teak made to shape and size all as specified and directed.\nDrg No. FD-279 | |||
3 | 1.01 | S&F Front leg | 35 | Each | |
4 | 1.02 | S&F Rear leg | 30 | Each | |
5 | 1.03 | S&F Front rail | 25 | Each | |
6 | 1.04 | S&F Rear rail | 20 | Each | |
7 | 1.05 | S&F Side rail | 15 | Each | |
8 | 1.06 | S&F Stiffener 'H' type | 60 | Each | |
9 | 1.07 | S&F Back Rest | 35 | Each | |
10 | 2 | Chair Easy :- M & L for removing of the following UNSV parts from chair Easy and S&F new parts made out of well seasoned Ist class hard wood teak made to shape and size all as specified and directed.\nDrg No. FD-229 | |||
11 | 2.01 | S&F Front leg | 20 | Each | |
12 | 2.02 | S&F Rear leg | 20 | Each | |
13 | 2.03 | S&F Arm Rest | 24 | Each | |
14 | 2.04 | S&F Front rail of seat frame | 20 | Each | |
15 | 2.05 | S&F Rear rail of seat Frame | 20 | Each | |
16 | 2.06 | S&F Side rail of seat frame | 20 | Each | |
17 | 2.07 | S&F Side rail of back frame | 20 | Each | |
18 | 2.08 | Lower back frame | 20 | Each | |
19 | 2.09 | Upper Rail of back frame | 20 | Each | |
20 | 3 | Chair writing : M & L for removing of the following UNSV parts from chair writing and S&F new parts made out of well seasoned Ist class hard wood teak made to shape and size all as specified and directed.\nDrg No. FD-20, 202, 250 & 280 | |||
21 | 3.01 | S&F Front leg | 35 | Each | |
22 | 3.02 | S&F Rear leg | 21 | Each | |
23 | 3.03 | S&F Front rail | 25 | Each | |
24 | 3.04 | S&F Rear rail | 26 | Each | |
25 | 3.05 | S&F Side rail | 25 | Each | |
26 | 3.06 | S&F Stiffener 'H' type | 45 | Each | |
27 | 3.07 | S&F Back Rest | 30 | Each | |
28 | 3.08 | S&F Arm Rest | 25 | Each | |
29 | 4 | Caning of Chair all type : M& L for removing UNSV cane plastic from chair easy, chair dinning, chair writing etc and cleaning the surfaces and recaning the chair with 2mm wide 0.4 thick new plastic cane in godrej pattern and perimeter woven with 3 mm wide half round cane of approved make. Rest all as directed. \nDrg No. FD-279, 229, 202,250 & 280 | 46 | Sqm | |
30 | 5 | Bed Plywood Top : M & L for removing UNSV parts from Bed Ply top and S&F new parts made out of well seasoned Ist class hard wood teak made to shape and size all as specified and directed.\nDrg No. FD-246 | |||
31 | 5.01 | S&F of Ply wood 12 mm thick commercial BWR grade of approved make with appropriate screw. | 30 | Each | |
32 | 5.02 | S&F of ply wood 4 mm thick one side teak face on both side of head board with plywood of approved make beaded with 4 mm thick teak wood beading. | 25 | Each | |
33 | 5.03 | All as per item No 5.02 above but foot board. | 25 | Each | |
34 | 5.04 | S&F of leg of head board made out of Ist class hard wood. | 12 | Each | |
35 | 5.05 | All as per item No 5.04 above but for leg of foot board | 12 | Each | |
36 | 5.06 | All as per item No 5.04 above but for long rail | 15 | Each | |
37 | 5.07 | All as per item No 5.04 above but for short rail | 16 | Each | |
38 | 5.08 | All as per item No 5.04 above but for stiffner | 35 | Each | |
39 | 6 | Sofa Set 5 Seater/4 Seater/single seater : - M & L for removing of the following UNSV parts from Sofa set 5 Seater/4 seater/single seater and S&F new parts made out of well seasoned Ist class hard wood teak made to shape and size all as specified and directed.\nDrg No. FD-281,373 | |||
40 | 6.01 | Arms rest | 8 | Each | |
41 | 6.02 | Batten | 15 | Each | |
42 | 6.03 | Front Long Rail of 3 Seater Seat frame | 2 | Each | |
43 | 6.04 | Rear Long Rail of 3 Seater Seat frame | 2 | Each | |
44 | 6.05 | Upper Long Rail of 3 seater back frame | 2 | Each | |
45 | 6.06 | Lower long Rail of 3 seater back frame | 2 | Each | |
46 | 6.07 | Replacing of existing old cushion foam size 22”x21”x4” from seat and back of Sofa set and supply and fixing of new cushion foam 22”x21”x4” (U Foam) 32 density of sleep well OR Godrej PURITO or ,kurlon & covered with cloth tapestry as per sample approved by GE (Cost of tapestry cloth not less than Rs 250/- per meters). The tapestry cushion cover shall have zip arrangement to accomodate the cushion all as specified and directed by Engineer-in-charge. | 60 | Each | |
47 | 6.08 | Removing unsv Tapestry cloth cover and M&L for new Tapestry cloth cover of approved quality with zip for sofa seat (or)back as per drawing and as approved by GE Cloth shall be of approved quality and cost not less than 250.00 per meter | 40 | Each | |
48 | 7 | Table Centre :M & L for removing of the following UNSV parts from Table centre and S&F new parts made out of well seasoned Ist class hard wood teak made to shape and size as per drg all as specified and directed.\nDrg No. FD-29,235 & 274,375 | |||
49 | 7.01 | Leg | 8 | Each | |
50 | 7.02 | Short rail. | 8 | Each | |
51 | 7.03 | Long rail. | 6 | Each | |
52 | 7.04 | Stiffener. | 8 | Each | |
53 | 7.05 | M & L for removing of UNSV top from table centre and S & F top made out of 18mm thick prelaminated particle board exterior grade of approved make and beaded with 4 mm thick teak wood beading duly polished all round the top complete all as shown on drg and directed. | 10 | Each | |
54 | 8 | Table Peg : M & L for removing of the following UNSV parts from peg table and S&F new parts made out of well seasoned Ist class hard wood teak made to shape and size as per drg all as specified and directed.\nDrg No. FD-46,236 & 277 | |||
55 | 8.01 | Leg | 10 | Each | |
56 | 8.02 | Side rail. | 10 | Each | |
57 | 8.03 | Stiffener. | 8 | Each | |
58 | 8.04 | M & L for removing UNSV Top of peg table and S & F Top made out of 18mm thick prelaminated particle board exterior grade approved make and beaded with 4 mm thick teak wood beading duly polished all round the top. | 12 | Each | |
59 | 9 | Teapoy - M & L for removing of the following UNSV parts from teapoy wooden and S&F new parts made out of well seasoned Ist class hard wood teak made to shape and size as per drg all as specified and directed.\nDrg No. FD-34(m), 278 | |||
60 | 9.01 | Leg | 10 | Each | |
61 | 9.02 | Long rail. | 10 | Each | |
62 | 9.03 | Short rail. | 8 | Each | |
63 | 9.04 | Stiffner 'H' Type | 8 | Each | |
64 | 9.05 | M & L for removing of U/S top from teapoy and S&F top made of 18mm thick prelaminated particle board exterior grade approved make and beaded with 4 mm thick teak wood beading duly polished all round the top. | 12 | Each | |
65 | 10 | Table Writing :M&L for removing of the following UNSV parts from table writing and S&F new parts made out of well seasoned Ist class hard wood teak made to shape and size as per drg all as specified and directed.\nDrg No. FD-249 & 275 | |||
66 | 10.01 | Stiffener | 10 | Each | |
67 | 10.02 | Leg | 10 | Each | |
68 | 10.03 | Long Rail | 10 | Each | |
69 | 10.04 | Short Rail | 10 | Éach | |
70 | 10.05 | M&L for removing U/S Top from Table writing and S&F of top made out of 18mm thick prelaminated particle board exterior grade approved make and beaded with 4 mm thick teak wood beading duly polished all round the top. | 12 | Éach | |
71 | 10.06 | M&L for removing U/S Door of cup boards from Table writing and S&F of new door made out of 18mm thick prelaminated particle board exterior grade approved make and beaded with 4 mm thick teak wood beading and fixed with piano hinges. | 6 | Each | |
72 | 10.07 | All as per item No 11.06 above but for side. | 5 | Each | |
73 | 10.08 | All as per item No 11.06 above but for drawer. | 5 | Each | |
74 | 10.09 | M&L for removing U/S ply wood from back side of Table writing and S&F plywood 6mm thick commercial, BWR grade of approved make with appropriate screws. | 5 | each | |
75 | 10.1 | M&L for removing U/S Knob from table writing and S&F new knob best quality all as specified and directed. | 15 | Each | |
76 | 11 | Table Dining 6 Pers- : M & L for removing the following UNSV parts from table dining 6 pers and S&F new parts made out of well seasoned Ist class hard wood teak made to shape and size as per drg all as specified and directed.\nDrg No. FD-46,236,273 & 277 | |||
77 | 11.01 | Legs. | 10 | Each | |
78 | 11.02 | Long rail. | 10 | Each | |
79 | 11.03 | Short rail. | 10 | Each | |
80 | 11.04 | M & L for removing UNSV corner and S & F new corner made out of 100x100x25mm 4 Nos each made to shape and fixed with appropriate screws. | 40 | Each | |
81 | 11.05 | M & L for removing of UNSV top from Table ding 6 pers and S&F top made out of 18mm thick prelaminated particle board exterior grade approved make and beaded with 4 mm thick teak wood beading duly polished all round the top. | 9 | Each | |
82 | 12 | Table Dining 8 Pers : M&L for removing of the following UNSV parts from table dining 8 pers and S&F new parts made out of well seasoned Ist class hard wood teak made to shape and size as per drg all as specified and directed.\nDrg No. FD-46,236,273 & 277 | |||
83 | 12.01 | Legs. | 4 | Each | |
84 | 12.02 | Long rail. | 4 | Each | |
85 | 12.03 | Short rail. | 4 | Each | |
86 | 12.04 | S & F corner made out of 100x100x25mm 4 Nos each made to shape and fixed with appropriate screws. | 4 | Each | |
87 | 12.05 | M & L for removing of U/S top from Table dining 8 Pers and S&F top made out of 18mm thick prelaminated particle board exterior grade approved make and beaded with 4 mm thick teak wood beading duly polished all round the top. | 2 | Each | |
88 | 13 | Almirah large steel with shelves : M & L for removing UNSV shelves from almirah large steel and S&F of new shelves made of 1.6 mm thick MS sheet all as specified and directed.\nDrg No. FD-351,104(m),1031,1033 | 8 | Each | |
89 | 13.01 | All as per item No 13.00 above but lock cover. | 4 | Each | |
90 | 13.02 | All as per item No 13.00 above but leg. | 12 | Each | |
91 | 13.03 | M& L for spot welding to almirah large steel complete all as specified and directed. | 30 | Each | |
92 | 13.04 | M & L for removing UNSV 3 way locking device from almirah large steel and S&F new 3 way locking device all as specified and directed. | 5 | Each | |
93 | 13.05 | M & L for removing UNSV lock from almirah large steel and S& F new lock 6 lever of approved make rest all as specified and directed. | 35 | Each | |
94 | 13.06 | M & L for removing UNSV handle from steel almirah and S&F of new handle of chromium plated all as specified and directed. | 20 | Each | |
95 | 13.07 | M & L for removing UNSV door hinges from steel almirah and S&F of new door hinges 75/80 mm duly welded all as specified and directed. | 20 | Each | |
96 | 14 | Almirah Med steel with shelves : - M & L for removing unserviceable shelves from almirah med steel and S&F of new shelves made of 1.6 mm thick MS sheet all as specified and directed.\nDrg No. FD-243,114(M),1032,1034 | 20 | Each | |
97 | 14.01 | All as per item No 14.00 above but lock cover. | 5 | Each | |
98 | 14.02 | All as per item No 14.00 above but leg. | 30 | Each | |
99 | 14.03 | M& L for spot welding to almirah Med steel complete all as specified and directed. | 40 | Each spot | |
100 | 14.04 | M & L for removing UNSV 3 way locking device from almirah med steel and S&F new 3 way locking device all as specified and directed. | 5 | Each | |
101 | 14.05 | M & L for removing UNSV lock from almirah large med and S& F new lock 6 lever of approved make rest all as specified and directed. | 80 | Each | |
102 | 14.06 | M & L for removing UNSV handle from almirah med steel and S&F of new handle of chromium plated mild steel all as specified and directed. | 50 | Each | |
103 | 14.07 | M & L for removing UNSV door hinges from almirah med steel and S&F of new door hinges 75/80 mm duly welded all as specified and directed. | 20 | Each | |
104 | 15 | Chair Varandah : -M& L for spot welding to chair varandah complete all as directed.\nDrg No. FD-256 | 7 | Each | |
105 | 15.01 | M & L for removing UNSV cane plastic from chair varandah and smooth the surface and apply two coats of white synthetic enamel paint complete all as specified and directed. | 12 | Each | |
106 | 15.02 | M&L for Re-canning of Chair Varandah in mat pattern with 4 mm wide 0.5 mm thick half round plastic cane of approved make all as specified and directed. | 12 | Each | |
107 | 15.03 | M & L for removing UNSV hard PVC shoes from chair verandah and S&F new PVC shoes four Nos each chair complete all as specified and directed. | 48 | Each spot | |
108 | 16 | Table Office Officer steel :- M & L for removing UNSV top from table office officers steel and S&F of new top made out of Pre laminated particle board 18/19mm thick exterior grade of approved make with 4mm thick teak wood beading around the top complete all as specified and directed.\nDrg No. FD-1003 | 5 | Each | |
109 | 16.01 | M & L for removing UNSV drawer from table office officers steel and S&F new drawer made of 1mm thick PBI sheet and all as specified and as directed. | 5 | Each | |
110 | 16.02 | M&L for removing UNSV leg and S & F New leg made of MS square pipe 25mm and 1.6mm thick 04 Nos in each table rest all as specified and directed. | 5 | Each | |
111 | 16.03 | M& L for spot welding to Table office offrs steel all as directed. | 20 | Each | |
112 | 16.04 | M & L for removing UNSV stiffener and S & F new stiffener made out of MS square pipe 25mm and 1.6mm thick of Qty 03 Nos in each table rest all as per drg and as directed. | 5 | Each spot | |
113 | 16.05 | Removing UNSV hard PVC shoes from Table office offrs and S&F new PVC shoes four Nos each table and all as specified and directed. | 10 | Each | |
114 | 17 | Table office Clk steel -: M & L for removing UNSV top from table office clk steel and S&F of new top made out of Pre laminated particle board 18/19mm thick exterior grade of approved make and beaded with 4mm thick teak wood beading complete all as specified and directed.\nDrg No. FD-84(m),1004 | 10 | Each | |
115 | 17.01 | M & L for removing UNSV drawer from table office clk steel and S&F new drawer made of 1mm thick PBI sheet and all as specified and as directed. | 5 | Each | |
116 | 17.02 | M & L for removing UNSV leg and S & F New leg made of MS square pipe 25mm and 1.6mm thick rest all as specified and as directed. | 5 | Each | |
117 | 17.03 | M & L for removing UNSV hard PVC shoes from table office clk and S&F new PVC shoes four Nos in each table and all as specified and directed. | 20 | Each | |
118 | 17.04 | M & L for removing UNSV stiffener and S & F new stiffener made out of MS square pipe 25mm and 1.6mm thick of Qty 03 in each table rest all as per drg and as directed. | 5 | Each | |
119 | 17.05 | M& L for spot welding to Table office clk complete all as directed | 20 | Each | |
120 | 18 | Table Steel 3'X2' with & w/o drawer :- M & L for removing UNSV top from Table Steel 900X600X760mm with and without drawer and S&F of new top made out of Pre laminated particle board 18/19mm thick exterior grade of approved make and beaded with 4mm thick teak wood beading complete all as specified and directed.\nDrg No. FD-1007,1008 | 30 | Each | |
121 | 18.01 | M & L for removing UNSV drawer from table 900x600'x760mm steel with drawer and S&F new drawer made of 1mm thick PBI sheet all as specified and as directed. | 4 | Each | |
122 | 18.02 | M&L for removing UNSV leg and S & F New leg made of MS square pipe 25mm and 1.6mm thick rest all as specified and as directed. | 8 | Each | |
123 | 18.03 | M& L for spot welding to Table Steel 900x600x760mm complete all as specified and directed. | 20 | Each | |
124 | 18.04 | M & L for removing UNSV hard PVC shoes from Table Steel 900x600x760mm and S&F new PVC shoes four Nos in each table all as specified and directed. | 48 | Each | |
125 | 18.05 | Removing UNSV stiffener and S & F new stiffener made out of MS square pipe 25mm and 1.6mm thick of Qty 03 in each table rest all as specified and as directed. | 3 | Each | |
126 | 19 | Chair CBA Steel with Arms M & L for removing UNSV seat from chair steel tubular and S&F new seats made out of 2nd class seasoned teak wood duly Canned with half round plastic cane 2mm wide 0.4mm thick and perimeter woven with 3mm wide 0.5mm thick cane and painting with black synhetic enamel paint rest all as specified and directed.\nDrg No. FD-75 | 100 | Each | |
127 | 19.01 | All as per item No. 19.00 above but back. | 100 | Each | |
128 | 19.02 | M & L for removing UNSV MS cleats from chair CBA steel and S & F new MS cleats of size 50 X 25 X3mm, 4 Nos each chair on seat and back by welding to rest the seat complete all as specified and directed. | 50 | Each | |
129 | 19.03 | M & L for removing of old UNSV arms rest from chair CBA steel and S&F new arms rest made out of 2nd class seasoned hard wood duly painted with synthetic enamel paint fitted with appropriate screws all as specified and directed. | 80 | Each | |
130 | 20 | Locker Bed Side Steel : M & L for removing UNSV handle from locker bed side steel and S&F stainless steel chromium plated handle 100mm of approved quality 2 Nos each all as specified and directed.\nDrg No. FD-257,1029 | 90 | Each | |
131 | 20.01 | M & L for removing UNSV hasp and staple from locker bed side steel and S&F new Aluminium hasp and staple 100mm with appropriate screws all as specified and directed. | 90 | Each | |
132 | 20.02 | M & L for removing UNSV shelf from locker bed side steel and S&F new shelf made out of MS sheet 1.6mm thick all as specified and directed. | 16 | Each | |
133 | 20.03 | M & L for removing UNSV hanging rod from locker bed side steel and S & F CP Hanging rod 19mm dia 1.6 mm thick as approved and all as specified and directed. | 50 | Each | |
134 | 20.04 | M & L for removing UNSV legs from locker bed side steel and S&F of new leg made of 1.6mm thick MS sheet made to shape duly painted with two coats of OG synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. | 50 | Each | |
135 | 21 | Charpoy MS Tubular with ply top : M & L for Removing UNSV Head/ foot Board from charpoy tubular steel and S&F new foot/ head board made out of 18mm thick pre-laminated particle board exterior grade of approved make and all as specified and as directed.\nDrg No. FD-CWE/Tez/FD-04 | 60 | Each | |
136 | 21.01 | M&L for removing of UNSV Stiffeners from charpoy tubular steel and S&F 2 Nos new stiffener made out of 25 x 25 x 900 x 16 Gauge MS Tube welded in between long rail complete all as specified and as directed. | 60 | Each | |
137 | 21.02 | M & L for removing of UNSV ply wood from charpoy MS tubular and S&F ply wood 12mm thick commercial BWR of approved make with appropriate nut and bolt with washer complete all as specified and as directed. | 120 | Each | |
138 | 21.03 | M& L for spot welding to Charpoy Tublar with ply top complete all as specified and directed. | 50 | Each | |
139 | 22 | Charpoy GI pipe plywood top : - M & L for Removing UNSV three Nos MS flats Iron size 25x5x850mm long for each charpoy to be fixed by welding in between long rail in equal distance and two holes in each flate iron and apply black synthetic enamel paint over a coat of primer rest all as directed. \nDrg No. FD-220(M) | 150 | Each | |
140 | 22.01 | M & L for Removing UNSV flat iron size 25x5x220mm long four number in each charpoy to be fixed by welding in each corner in between long rail and short rail and one hole on each flate iron of charpoy with long rail & short rail and apply black synthetic enamel paint over a coat of primer rest all as directed. | 150 | Each | |
141 | 22.02 | S&F ply wood 12mm commercial BWR grade of approved make on top of charpoy GI pipe with appropriate nut and bolt headless 6mm with washer complete all as specified and directed. | 300 | Each | |
142 | 22.03 | M&L for removing of UNSV long rail from charpoy GI Pipe 32mm and S&F long rail made of GI tubing 32mm dia medium grade heavy duty of approved make duly threaded on both ends all as specified and directed. | 30 | Each | |
143 | 22.04 | M&L for cutting of dismantled old UNSV long rail from charpoy GI Pipe 32mm dia modifying into short rail by threading both ends and fixing the same to charpoy GI pipe all as specified and as directed. | 60 | Each | |
144 | 22.05 | M&L for cutting of dismantled old UNSV short rail from charpoy GI Pipe 32mm dia and modifying into legs and threading of end and M&L for welding the clamps for FMN set and fixing the same to charpoy GI pipe all as specified and as directed. | 120 | Each | |
145 | 22.06 | M & L for removing of UNSV elbow from charpoy GI pipe and S&F new GI three way elbow 32mm dia med grade of approved make and all as specified and directed. | 90 | Each | |
146 | 22.07 | M & L for removing of old UNSV check nut from charpoy GI pipe and S&F new GI check nut 10mm thick complete all as specified and directed | 60 | Each | |
147 | 23 | Table Dressing Ladies - : M & L for removing UNSV top from table dressing ladies and S & F new top made of 18mm thick pre laminated particle board exterior grade of approved make and all as specified and directed.\nDrg No. FD-32,251 & 378 | 4 | Each | |
148 | 23.01 | All as per item No 24.00 above but for side. | 4 | Each | |
149 | 23.02 | All as per item No 24.00 above but for drawer. | 6 | Each | |
150 | 23.03 | M & L for removing UNSV mirror from Table dressing ladies and S & F new 5 mm thick mirror of approved make and remove back ply and fix new ply 6mm thick commercial type BWR with appropriate screw all as specified and directed . | 3 | Each spot | |
151 | 23.04 | M & L for removing UNSV knob and S&F new knob best quality all as specified and directed. | 6 | Each | |
152 | 23.05 | M&L for removing UNSV leg from table dressing ladies and S&F new legs of made out of Ist class hard wood teak all as specified and directed. | 2 | Each | |
153 | 23.06 | (g) M&L for removing UNSV Glass sliding shutter with aluminium channel from table dressing ladies and S&F new Glass shutter made out of 5mm thick glass pan with aluminium channel 20 mm width with appropriate screw all as specified and directed. | 2 | Each | |
154 | 24 | Table Dressing Gents : (a) M & L for removing UNSV mirror of Table dressing gents and S & F of new 5 mm thick mirror of approved make with new teak wood frame and fix plywood 6mm commercial type BWR on back with appropriate screw all as specified.\nDrg No. FD-31 & 230 | 15 | Each | |
155 | 24.01 | M & L for removing UNSV top from table dressing gents and S & F new top made of 18mm thick veneered teak face pre laminate particle board exterior grade all as specified. | 15 | Each | |
156 | 24.02 | All as per item No 25.00 above but drawer. | 15 | Each | |
157 | 24.03 | All as per item No 25.00 above but side. | 15 | Each | |
158 | 24.04 | M & L for removing UNSV knob from Table Dressing gents and S&F new knob best quality all as specified. | 25 | Each | |
159 | 24.05 | M&L for removing UNSV ply wood from box back side of Table Dressing gents and S&F plywood 6 mm thick commercial BWR grade with appropriate screw all as specified . | 15 | Each | |
160 | 25 | Painting :- M&L for removing the rusty surfaces, denting and applying putty to smoothen the surfaces and apply paint synthetic enamel OG of approved make all as specified and as directed for following:- | |||
161 | 25.01 | Almirah large steel (Drg No. FD,1031,1033) | 40 | Each | |
162 | 25.02 | Almirah med steel (Drg No. FD- 1032, 1034) | 140 | Each | |
163 | 25.03 | Chair CBA Steel with arms (Drg No. FD-75) | 120 | Each | |
164 | 25.04 | Charpoy MS Tubing with ply top (Drg No. CWE/Tez/FD-04) | 120 | Each | |
165 | 25.05 | Locker bed side steel (Drg No. FD-1029) | 350 | Each | |
166 | 25.06 | Rack side 3/4 space steel (Drg No. FD-1023) | 20 | Each | |
167 | 25.07 | Table 3'x2' with or without drawer steel (Drg No. FD-1007, 1008) | 25 | Each | |
168 | 25.08 | Table office clk steel (Drg No. FD-1004) | 15 | Each | |
169 | 25.09 | Table offie offrs steel (Drg No. FD-1003) | 15 | Each | |
170 | 26 | Polishing : M&L for removing old polish from the surfaces by scrubbing with emery paper, cleaning all dust, filling bore holes with pasty filter prepared by mixing plaster of paris with water to a creamy consistence and adding raw in quantity to obtain the desired colour to the base and to allow the surface to be dried up and set aside for 24 hrs for the surfaces to harden, rub the surface with sand paper it is thoroughly smooth and dried to receive a coat of acrylic wood finish polish of approved make complete all as specified and as directed for the following:-\n | |||
171 | 26.01 | Chair dining (Drg No. FD- 279) | 100 | Each | |
172 | 26.02 | Chair Easy (Drg No. FD- 229) | 40 | Each | |
173 | 26.03 | Chair writing/CBA (Drg No. FD-250, 280) | 60 | Each | |
174 | 26.04 | Bed Ply wood top (Drg No. FD-245, 246, 247) | 50 | Each | |
175 | 26.05 | Table center(Drg No. FD-235, 274) | 15 | Each | |
176 | 26.06 | Table peg (Drg No. FD-46,236 & 277) | 15 | Each | |
177 | 26.07 | Table writing (Drg No. FD- 275 , DB-3902) | 15 | Each | |
178 | 26.08 | Teapoy (W) (Drg No. FD-232 & 284) | 20 | Each | |
179 | 26.09 | Sofa Set 5 Seater (Drg No. FD-281, 373) | 4 | Each | |
180 | 26.1 | Sofa Set 4seater (Drg No. FD-281, 373) | 1 | Each | |
181 | 26.11 | Sofa Set single seater (Drg No. FD-281, 373) | 8 | Each | |
182 | 26.12 | Table Dining 6 Pers (Drg No. FD-236, 277) | 10 | Each | |
183 | 26.13 | Table Dining 8 Pers (Drg No. FD-236 , 277) | 2 | Each |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail