}

Design , Construction And Retrofitting Of Pwss Under Jjm At Village 1 . Brahmankheda 2 . Dhablasia 3 . Petlavad 4 . Kanthariya 5 . Kadai 6 . Devali Block Mahidpur Including Construction Of Overhead Tanks , Sumpwells And Laying And Jointing Of Pipe Line , Mahidpur-Madhya Pradesh

Public Health Engineering Department-PHED has published Design , Construction And Retrofitting Of Pwss Under Jjm At Village 1 . Brahmankheda 2 . Dhablasia 3 . Petlavad 4 . Kanthariya 5 . Kadai 6 . Devali Block Mahidpur Including Construction Of Overhead Tanks , Sumpwells And Laying And Jointing Of Pipe Line . Submission Date for this Tender is 28-01-2021. Design Consultancy Tenders in Mahidpur Madhya Pradesh. Bidders can get complete Tender details and download the document.




Tender Notice

26468735
Corrigendum : Design , Construction And Retrofitting Of Pwss Under Jjm At Village 1 . Brahmankheda 2 . Dhablasia 3 . Petlavad 4 . Kanthariya 5 . Kadai 6 . Devali Block Mahidpur Including Construction Of Overhead Tanks , Sumpwells And Laying And Jointing Of Pipe Line
Open Tender
Indian
Madhya Pradesh
Mahidpur
28-01-2021

Tender Details

Design , Construction And Retrofitting Of Pwss Under Jjm At Village 1 . Brahmankheda 2 . Dhablasia 3 . Petlavad 4 . Kanthariya 5 . Kadai 6 . Devali Block Mahidpur Including Construction Of Overhead Tanks , Sumpwells And Laying And Jointing Of Pipe Line Etc . Comple

Corrigendum Details

Sr No CorrigendumDate Corrignedum CorrigendumType NewSubmissionDate
1 19-Jan-2021 Date Date 28-01-2021

Key Value

Document Fees
INR 12500 /-
EMD
INR 174589.0 /-
Tender Value
Refer document

BOQ Items

Name of Work: - Design and Construction of Retrofitting work of water supply schemes under jal Jivan Mission at Village 1.BRAHMANKHEDA 2.DHABLASIA 3.PETLAVAD 4.KANTHARIYA 5.KADAI 6.DEVALI of Block MAHIDPUR Distt. UJJAIN based on underground sources including construction of R.C.C. sump wells, R.C.C. over head tanks, providing and installation of pumps at under ground sources and sumps, providing, laying & jointing of pumpingmain and distribution pipe lines, household tap connections and electric power connections including cost of all material & labour alongwith 90 days successful trial run of all schemes as per detailed scope of work.
Sl. No. Item Description Item Code / Make Quantity Units
1 1 Demolishing cement concrete manually / by mechanical means including disposal of material within 50 m lead as per direction of engineer-in- charge. Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) USOR. Item.no.16.15.1-P.no.209 60 Cum
2 2 Dismantling of Cement Concrete Pavment by mechanical means using pneumatic tools, cutter breaking to pieces not exceeding 0.02 cum in volume and stock piling at designated locations and disposal of dismantled materials up to a lead of 1000 metres, stacking serviceable and unserviceable materials separately. USOR. Item.no.16.15.3-P.no.209 175 Cum
3 3 Earth work in Excavationby mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead up to 50 m and lift up to 1.5 m, disposed earth to be leveled and neatly dressed. All Kind of Soil. USOR. Item.no. 16.4 -P.no.207 2015.25 Cum
4 4 Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead up to 50 m and lift up to 1.5 m, disposed earth to be leveled and neatly dressed. Soft rock with or without blasting or bituminous pavement / cement concrete road. USOR. Item.no.16.6(a)-P.no.207 1011.85 Cum
5 5 Providing, Laying, Jointing & field testing of HDPE pipes, (High Density Polyethylene pipes) confirming to IS 4984/ 14151/ 12786/ 13488 with necessary jointing material like mechanical connector of jointing pipes by heating to the ends of pipes with the help of Teflon coated electric mirror/ heater to the required temperature and then pressing the ends together against each other, to form a monolithic & leak proof joint by thermosetting process. It may be required to be done with Jack/Hydraulic Jacks/ Butt fusion machine. (50 mm & above fusion jointed & below 50mm mechanical jointed) 90mm dia HDPE 6 Kg/cm² USOR.Item.no. 9.1 -P.no.122 5500 Mtr
6 6 Providing, Laying, Jointing & field testing of HDPE pipes, (High Density Polyethylene pipes) confirming to IS 4984/ 14151/ 12786/ 13488 with necessary jointing material like mechanical connector of jointing pipes by heating to the ends of pipes with the help of Teflon coated electric mirror/ heater to the required temperature and then pressing the ends together against each other, to form a monolithic & leak proof joint by thermosetting process. It may be required to be done with Jack/Hydraulic Jacks/ Butt fusion machine. (50 mm & above fusion jointed & below 50mm mechanical jointed) 110 mm dia HDPE 6 Kg/cm² USOR.Item.no. 9.1 -P.no.122 600 Mtr
7 7 Providing, Laying, Jointing & field testing of HDPE pipes, (High Density Polyethylene pipes) confirming to IS 4984/ 14151/ 12786/ 13488 with necessary jointing material like mechanical connector of jointing pipes by heating to the ends of pipes with the help of Teflon coated electric mirror/ heater to the required temperature and then pressing the ends together against each other, to form a monolithic & leak proof joint by thermosetting process. It may be required to be done with Jack/Hydraulic Jacks/ Butt fusion machine. (50 mm & above fusion jointed & below 50mm mechanical jointed) 90 mm dia HDPE 10 Kg/cm² SOR.Item.no. 9.1 -P.no.122 2000 Mtr
8 8 Providing, Laying, Jointing & field testing of HDPE pipes, (High Density Polyethylene pipes) confirming to IS 4984/ 14151/ 12786/ 13488 with necessary jointing material like mechanical connector of jointing pipes by heating to the ends of pipes with the help of Teflon coated electric mirror/ heater to the required temperature and then pressing the ends together against each other, to form a monolithic & leak proof joint by thermosetting process. It may be required to be done with Jack/Hydraulic Jacks/ Butt fusion machine. (50 mm & above fusion jointed & below 50mm mechanical jointed) 160 mm dia HDPE 6 Kg/cm² USOR.Item.no. 9.1 -P.no.122 100 Mtr
9 9 Installation of HDPE pipe by Horizontal Direction Drilling Method including preparing and setting up the plant and equipment , making string of new pipe material, installing new pipe string and making the system ready for commissioning by HDD operation including drilling, stringing,reaming and pulling back the new pipe on the designed bore path alignment , proper disposal of drilling fluid, as per code of practice for horizontal direction drilling technique suiting Indian conditions. Required pipes/specials and other civil work shall be paid separately - In all types of soils. HDPE pipes of any class 90 mm outer dia.(USOR No 16.3 page 207) 850 Mtr
10 10 Installation of HDPE pipe by Horizontal Direction Drilling Method including preparing and setting up the plant and equipment , making string of new pipe material, installing new pipe string and making the system ready for commissioning by HDD operation including drilling, stringing,reaming and pulling back the new pipe on the designed bore path alignment , proper disposal of drilling fluid, as per code of practice for horizontal direction drilling technique suiting Indian conditions. Required pipes/specials and other civil work shall be paid separately - In all types of soils. HDPE pipes of any class 110 mm outer dia.(USOR No 16.3 page 207) 200 Mtr
11 11 Providing and laying HDPE Bend 90º confirming to IS specifications. 90 mm - 6 Kg / cm² USOR.Item.no.9.2 -P.no.122 33 Each
12 12 Providing and laying HDPE Bend 90º confirming to IS specifications. 110 mm - 6 Kg / cm² USOR.Item.no.9.2 -P.no.122 7 Each
13 13 Providing and laying HDPE Bend 90º confirming to IS specifications. 160 mm - 6 Kg / cm² USOR.Item.no.9.2 -P.no.122 2 Each
14 14 Providing and laying HDPE Bend 45º confirming to IS specifications. 90 mm - 6 Kg / cm² USOR.Item.no.9.2 -P.no.123 15 Each
15 15 Providing and laying HDPE Bend 45º confirming to IS specifications. 110 mm - 6 Kg / cm² USOR.Item.no.9.2 -P.no.123 7 Each
16 16 Providing and laying Equal HDPE Tee confirming to IS specification 90 mm-6 Kg/cm² USOR Item.no.9.4 -P.no.123 34 Each
17 17 Providing and laying Equal HDPE Tee confirming to IS specification 110 mm - 6 Kg / cm² USOR Item.no.9.4 -P.no.123 10 Each
18 18 Providing and laying Equal HDPE Tee confirming to IS specification 160 mm - 6 Kg / cm² USOR Item.no.9.4 -P.no.123 2 Each
19 19 Providing and laying HDPE Reducer: confirming to IS specifications. 160 mm USOR Item.no. 9.6 -P.no.124 2 Each
20 20 Providing and laying HDPE Reducer: confirming to IS specifications. 110 mm USOR Item.no. 9.6 -P.no.124 8 Each
21 21 Providing and laying HDPE End Cap confirming to IS specifications. 90 mm USOR Item.no. 9.8 -P.no.124 35 Each
22 22 Providing and laying HDPE End Cap confirming to IS specifications. 110 mm USOR Item.no. 9.8 -P.no.124 6 Each
23 23 Providing and laying including testing Pipe end confirming to IS specification. 90 mm - 6 Kg / cm² USOR Item.no. 9.5 -P.no. 123 30 Each
24 24 Providing and laying including testing Pipe end confirming to IS specification. 110mm-6 Kg /cm² USOR Item.no. 9.5 -P.no. 123 10 Each
25 25 Providing and laying including testing Pipe end confirming to IS specification. 160mm-6 Kg /cm² USOR Item.no. 9.5 -P.no. 123 2 Each
26 26 Providing and laying including testing Pipe end confirming to IS specification. 90mm-10 Kg / cm² USOR Item.no. 9.5 -P.no. 123 12 Each
27 27 Providing and fixing G. I. threaded Flange in G.I. Pipe line i/c cutting threading testing etc. complete (New work) confirming to IS 1879 80 mm dia USOR Item.no. 6.39 -P.no.99-100 12 Each
28 28 Providing & Supply of Electro Fusion Fittings in accordance with BS EN 12201 : Part-3 suitable for drinking water with in black/blue color manufactured from compounded PE80/PE100 virgin polymer and compatible with PE80/PE100 pipes, in pressure rated SDR 11 with min PN 12.5 rated for water application and shall be inclusive of all cost such as testing, all taxes related to central state & municipal, inspection charges, transportation up to site, transit insurance, loading, unloading, stacking etc. complete. Electro Fusion Coupler 90mm USOR Item.no.9.14.1.8 -P.no.129 25 Each
29 29 Providing & Supply of Electro Fusion Fittings in accordance with BS EN 12201 : Part-3 suitable for drinking water with in black/blue color manufactured from compounded PE80/PE100 virgin polymer and compatible with PE80/PE100 pipes, in pressure rated SDR 11 with min PN 12.5 rated for water application and shall be inclusive of all cost such as testing, all taxes related to central state & municipal, inspection charges, transportation up to site, transit insurance, loading, unloading, stacking etc. complete. Electro Fusion Coupler 110mm USOR Item.no.9.14.1.9 -P.no.129 8 Each
30 30 Providing & Supply of Electro Fusion Fittings in accordance with BS EN 12201 : Part-3 suitable for drinking water with in black/blue color manufactured from compounded PE80/PE100 virgin polymer and compatible with PE80/PE100 pipes, in pressure rated SDR 11 with min PN 12.5 rated for water application and shall be inclusive of all cost such as testing, all taxes related to central state & municipal, inspection charges, transportation up to site, transit insurance, loading, unloading, stacking etc. complete. Electro Fusion Coupler 160mm USOR Item.no.9.14.1.12 -P.no.129 2 Each
31 31 Providing & Supply of Electro Fusion Fittings in accordance with BS EN 12201 : Part-3 suitable for drinking water with in black/blue color manufactured from compounded PE80/PE100 virgin polymer and compatible with PE80/PE100 pipes, in pressure rated SDR 11 with min PN 12.5 rated for water application and shall be inclusive of all cost such as testing, all taxes related to central state & municipal, inspection charges, transportation up to site, transit insurance, loading, unloading, stacking etc. complete.Electro Fusion Equal Tee 90mm USOR Item.no.9.14.2.8 -P.no.130 12 Each
32 32 Providing & Supply of Electro Fusion Fittings in accordance with BS EN 12201 : Part-3 suitable for drinking water with in black/blue color manufactured from compounded PE80/PE100 virgin polymer and compatible with PE80/PE100 pipes, in pressure rated SDR 11 with min PN 12.5 rated for water application and shall be inclusive of all cost such as testing, all taxes related to central state & municipal, inspection charges, transportation up to site, transit insurance, loading, unloading, stacking etc. complete.Electro Fusion Equal Tee 110mm USOR Item.no.9.14.2.9 -P.no.130 6 Each
33 33 Providing & Supply of Electro Fusion Fittings in accordance with BS EN 12201 : Part-3 suitable for drinking water with in black/blue color manufactured from compounded PE80/PE100 virgin polymer and compatible with PE80/PE100 pipes, in pressure rated SDR 11 with min PN 12.5 rated for water application and shall be inclusive of all cost such as testing, all taxes related to central state & municipal, inspection charges, transportation up to site, transit insurance, loading, unloading, stacking etc. complete. Electro Fusion Elbow 90 Degree 90mm USOR Item.no.9.14.3.8 -P.no.130 12 Each
34 34 Providing & Supply of Electro Fusion Fittings in accordance with BS EN 12201 : Part-3 suitable for drinking water with in black/blue color manufactured from compounded PE80/PE100 virgin polymer and compatible with PE80/PE100 pipes, in pressure rated SDR 11 with min PN 12.5 rated for water application and shall be inclusive of all cost such as testing, all taxes related to central state & municipal, inspection charges, transportation up to site, transit insurance, loading, unloading, stacking etc. complete. Electro Fusion Elbow 90 Deg.110mm USOR Item.no.9.14.3.9 -P.no.130 6 Each
35 35 Providing & Supply of Electro Fusion Fittings in accordance with BS EN 12201 : Part-3 suitable for drinking water with in black/blue color manufactured from compounded PE80/PE100 virgin polymer and compatible with PE80/PE100 pipes, in pressure rated SDR 11 with min PN 12.5 rated for water application and shall be inclusive of all cost such as testing, all taxes related to central state & municipal, inspection charges, transportation up to site, transit insurance, loading, unloading, stacking etc. complete. Electro Fusion Elbow 90 Deg.160 mm USOR Item.no.9.14.3.12 -P.no.130 2 Each
36 36 Providing & Supply of Electro Fusion Fittings in accordance with BS EN 12201 : Part-3 suitable for drinking water with in black/blue color manufactured from compounded PE80/PE100 virgin polymer and compatible with PE80/PE100 pipes, in pressure rated SDR 11 with min PN 12.5 rated for water application and shall be inclusive of all cost such as testing, all taxes related to central state & municipal, inspection charges, transportation up to site, transit insurance, loading, unloading, stacking etc. complete. Electro Fusion Reducer110 x 90mm USOR Item.no.9.14.4.8 -P.no.131 6 Each
37 37 Providing & Supply of Electro Fusion Fittings in accordance with BS EN 12201 : Part-3 suitable for drinking water with in black/blue color manufactured from compounded PE80/PE100 virgin polymer and compatible with PE80/PE100 pipes, in pressure rated SDR 11 with min PN 12.5 rated for water application and shall be inclusive of all cost such as testing, all taxes related to central state & municipal, inspection charges, transportation up to site, transit insurance, loading, unloading, stacking etc. complete. Electro Fusion Reducer160 x 110mm USOR Item.no.9.14.4.8 -P.no.131 2 Each
38 38 Providing & Supply of Electro Fusion Tapping Ferrule (Branch Tapping Saddle) female BSP Threaded with SS 304 insert fittings in accordance with BS EN 12201 :Part-3 suitable for drinking water with in black/blue colour manufactured from compounded PE80/PE100 pipes, in pressure rating SDR 11 with min PN 12.5 rated to central, state & municipal, inspection charges, transportation up to site, transit insurance, loading, unloading, stacking etc. complete. Electo Fusion Tapping Ferrule Saddle 110mmX20mm /110mmX25mm & 90mmx20mm / 90x25mm USOR Item.no.9.10.14, 9.10.15,9.10.8, 9.10.9 Page No.125 8 Each
39 39 Providing & Supply of Electro Fusion Tapping Ferrule (Branch Tapping Saddle) female BSP Threaded with SS 304 insert fittings in accordance with BS EN 12201 :Part-3 suitable for drinking water with in black/blue colour manufactured from compounded PE80/PE100 pipes, in pressure rating SDR 11 with min PN 12.5 rated to central, state & municipal, inspection charges, transportation up to site, transit insurance, loading, unloading, stacking etc. complete. Electo Fusion Tapping Ferrule Saddle110mmX32mm/110mmX40mm & 90mmx32mm / 90x40mm USOR Item.no.9.10.1.16,1.17,1.10 & 1.11-P.no.125 8 Each
40 40 Providing & fixing following cast iron double flanged single door reflux (non return) valves including jointing & testing with cost of jointing material such as bolts,nuts and rubber insertion all complete as per IS : 5312 (Part I) 80 mm dia USOR Item.no.8.4a -P.no 113 8 Each
41 41 Providing and fixing of Ductile iron double flanged sluice valves as per IS : 14846-2000 fittesd with cap including jointing & testing with cost of jointing material such as bolts, nuts, rubber insertions etc. all complete 80 mm USOR Item no. 4.41 page 71 39 Each
42 42 Providing and fixing of Ductile iron double flanged sluice valves as per IS : 14846-2000 fittesd with cap including jointing & testing with cost of jointing material such as bolts, nuts, rubber insertions etc. all complete 100 mm USOR Item no. 4.41 page 71 9 Each
43 43 Providing and fixing of Ductile iron double flanged sluice valves as per IS : 14846-2000 fittesd with cap including jointing & testing with cost of jointing material such as bolts, nuts, rubber insertions etc. all complete 150 mm USOR Item no. 4.41 page 71 2 Each
44 44 Construciton of Brick masonary valve chamber with 20 cm thick wall in 1:6 CM with 12 mm thick 1:4 Cement Plaster and base cource10 cm thick M-15 PCC. Inside Dimentions 90x60x100cm with ; Heavy Duty SFRC chamber cover with frame size 130x100 cm 10 cm thick.as per aproved specification. .USOR 2nd ADDENDUM OF Issued vide order no. 254 dt 06.08.2020. Item.no.17.46.2 -P.no. 7 50 No
45 45 Fabrication of M.S. pipes & specials as per relevant IS specifications inclusive of cost of all materials taxes and duties inspection charges, transit insurance, loading/unloading FOR site and stacking etc. complete as for direction of Engineer-in-Charge.Fabricating pipes and specials from Steel plates (all thickness as per design) USOR Item.no.10.2 -P.no 139 160 Kgs
46 46 Filling available excavated earth in trenches, lead up to 50m and lift upto 1.5 m in all kind of soil excluding watering and ramming. USOR. Item.no. 16.10b -P.no 208 3027.1 Cum
47 47 Providing and laying mechanically mixed cement concrete with crushed stone aggregate excluding centering and shuttering (with 20 mm nominal sizegraded stone aggregate) M-20 USOR. Item.no.16.23a.iii.-P.no. 210 235 cum
48 48 Providing and placing in position cold twisted steel and hot rolled deformed steel reinforcement for R.C.C. work i/c cutting, bending, binding etc. complete i/c cost of binding wire and wastage. USOR. Item.no.16.25a.-P.no. 211 220 kg
49 49 Providing and making Consumer Service Connection (Functional House Hold Taps Connection) from HDPE pipe with the help of electro fusion machine including all labour and material such as Electro fusion Saddle, brass ferrule (Not less than 100 gm in weight)/MDPE ferrule/flow control valve, double compression elbow, male/female threaded adopter with metal insert, sockets, MDPE union 20mm dia/GI union 15 mm dia (medium class), brass/SS tap etc all complete and all items/fittings shall be complying with the relevant BIS Codes. Rates also include excavation, cutting of road if required, refilling the trenches and restoration of road with minimum M20 (1:1.5:3) grade CC or equivalent grade of existing CC cutting for providing tap connection (whichever is richer), construction of Platform and grouting of circular post neat finished as per the drawing attached, testing all complete items USOR 2nd ADDENDUM OF Issued vide order no. 254 dt 06.08.2020 Item.no.17.41 -P.no. 4 \nFor connection with 20 mm dia MDPE pipe upto 5 meter and CONCRETE ROAD CROSSING is necessary.USOR 2nd ADDENDUM OF Issued vide order no. 254 dt 06.08.2020 Item.no.17.41.1 -P.no. 4 153 Each
50 50 Providing and making Consumer Service Connection (Functional House Hold Taps Connection) from HDPE pipe with the help of electro fusion machine including all labour and material such as Electro fusion Saddle, brass ferrule (Not less than 100 gm in weight)/MDPE ferrule/flow control valve, double compression elbow, male/female threaded adopter with metal insert, sockets, MDPE union 20mm dia/GI union 15 mm dia (medium class), brass/SS tap etc all complete and all items/fittings shall be complying with the relevant BIS Codes. Rates also include excavation, cutting of road if required, refilling the trenches and restoration of road with minimum M20 (1:1.5:3) grade CC or equivalent grade of existing CC cutting for providing tap connection (whichever is richer), construction of Platform and grouting of circular post neat finished as per the drawing attached, testing all complete items USOR 2nd ADDENDUM OF Issued vide order no. 254 dt 06.08.2020 Item.no.17.41 -P.no. 4 \nFor connection with 20 mm dia MDPE pipe more than 5 meter & upto 10 meter and CONCRETE ROAD CROSSING is necessary..USOR 2nd ADDENDUM OF Issued vide order no. 254 dt 06.08.2020 Item.no.17.41.2 -P.no. 4 153 Each
51 51 Providing and making Consumer Service Connection (Functional House Hold Taps Connection) from HDPE pipe with the help of electro fusion machine including all labour and material such as Electro fusion Saddle, brass ferrule (Not less than 100 gm in weight)/MDPE ferrule/flow control valve, double compression elbow, male/female threaded adopter with metal insert, sockets, MDPE union 20mm dia/GI union 15 mm dia (medium class), brass/SS tap etc all complete and all items/fittings shall be complying with the relevant BIS Codes. Rates also include excavation, cutting of road if required, refilling the trenches and restoration of road with minimum M20 (1:1.5:3) grade CC or equivalent grade of existing CC cutting for providing tap connection (whichever is richer), construction of Platform and grouting of circular post neat finished as per the drawing attached, testing all complete items USOR 2nd ADDENDUM OF Issued vide order no. 254 dt 06.08.2020 Item.no.17.41 -P.no. 4 \nFor connection with 20 mm dia MDPE pipe upto 5 meter and road crossing is not required. (Distribution pipe line is on the same side of house) .USOR 2nd ADDENDUM OF Issued vide order no. 254 dt 06.08.2020 Item.no.17.41.3 -P.no. 5 157 Each
52 52 Providing and making Consumer Service Connection (Functional House Hold Taps Connection) from HDPE pipe with the help of electro fusion machine including all labour and material such as Electro fusion Saddle, brass ferrule (Not less than 100 gm in weight)/MDPE ferrule/flow control valve, double compression elbow, male/female threaded adopter with metal insert, sockets, MDPE union 20mm dia/GI union 15 mm dia (medium class), brass/SS tap etc all complete and all items/fittings shall be complying with the relevant BIS Codes. Rates also include excavation, cutting of road if required, refilling the trenches and restoration of road with minimum M20 (1:1.5:3) grade CC or equivalent grade of existing CC cutting for providing tap connection (whichever is richer), construction of Platform and grouting of circular post neat finished as per the drawing attached, testing all complete items USOR 2nd ADDENDUM OF Issued vide order no. 254 dt 06.08.2020 Item.no.17.41 -P.no. 4 \nFor connection with 20 mm dia MDPE pipe upto 5 meter and road (OTHER THAN CONCRETE ROAD) crossing is necessary..USOR 2nd ADDENDUM OF Issued vide order no. 254 dt 06.08.2020 Item.no.17.41.4 -P.no. 5 58 Each
53 53 Providing and making Consumer Service Connection (Functional House Hold Taps Connection) from HDPE pipe with the help of electro fusion machine including all labour and material such as Electro fusion Saddle, brass ferrule (Not less than 100 gm in weight)/MDPE ferrule/flow control valve, double compression elbow, male/female threaded adopter with metal insert, sockets, MDPE union 20mm dia/GI union 15 mm dia (medium class), brass/SS tap etc all complete and all items/fittings shall be complying with the relevant BIS Codes. Rates also include excavation, cutting of road if required, refilling the trenches and restoration of road with minimum M20 (1:1.5:3) grade CC or equivalent grade of existing CC cutting for providing tap connection (whichever is richer), construction of Platform and grouting of circular post neat finished as per the drawing attached, testing all complete items USOR 2nd ADDENDUM OF Issued vide order no. 254 dt 06.08.2020 Item.no.17.41 -P.no. 4 \nFor connection with 20 mm dia MDPE pipe more than 5 meter & upto 10 meter and road (OTHER THAN CONCRETE ROAD) crossing is necessary..USOR 2nd ADDENDUM OF Issued vide order no. 254 dt 06.08.2020 Item.no.17.41.5 -P.no. 5 58 Each
54 54 Supplying & Installation of Energy efficiant five star BEE rating ISI Marked required capacity of Three Phase, 50 Hz, 415V, deep well submersible pump Steel body, suitable for 6"tube well with Control Panel Starter suitable for Submersible pump with dry run protection, single phase preventer, connections, including clamps, bore cap etc. as required as per specifications but excluding pipe and connection cable. 10 H.P. with 20 stages, Head Mt. 184-80 Discharge LPM 60-270 USOR. Item.no.24.20.106(ix)-P.no. 267 7 No
55 55 Supplying & Installation of Five star BEE rating ISI Marked required capacity of Three phase, 50 Hz, 415V, Open well Submersible pump, with Control Panel Starter with Dry Run Protection, single phase preventer, connections, etc. as required as per specifications but excluding pipe and connection cable.3.0 H.P. Head Mt.15-24, Discharge LPM 615-195 USOR. Item.no.24.20.113(ii)-P.no. 268 9 No
56 56 Supplying and laying of submersible flat cable ISI marked 3 core copper wire of suitable size with proper clamping of approved make. 4 Sq mm Multi Strand USOR. Item.no.24.20.107(ii)-P.no. 267 2490 mtr
57 57 Providing only of following galvanised Iron (MS) Pipes with specials (such as bends, elbows, tees etc) class light, medium & heavy including testing of joints, cost of pipes,specials and jointing materials all complete. Pipes and sockets conforming to IS-1239/2011 Part-II (A) 50 mm nominal bore USOR 2nd ADDENDUM OF Issued vide order no. 254 dt 06.08.2020 . Item.no.17.38.1-P.no. 3 1200 Mtr
58 58 Providing laying and jointing of following galvanized Iron (MS) Pipes with specials (such as bends, elbows, tees etc) class light, medium & heavy including testing of joints, cost of pipes, specials and jointing materials all complete. Pipes and sockets conforming to IS- 1239/2011 Part- II 65mm dia USOR 2nd ADDENDUM OF Issued vide order no. 254 dt 06.08.2020 Item.no.17.38.2-P.no. 3 54 Mtr
59 59 Providing laying and jointing of following galvanized Iron (MS) Pipes with specials (such as bends, elbows, tees etc) class light, medium & heavy including testing of joints, cost of pipes, specials and jointing materials all complete. Pipes and sockets conforming to IS- 1239/2011 Part- II 80mm dia ( Pg.no. 86 I.No.6.1) 48 Mtr
60 60 Labour only for lowering of three phase submersible pumping set in the tube well with pipe line assembly, electrical cable, testing etc. complete i/c connecting the electrical cable from pump & starter. Above 7.5 HP to 12.5 HP - Depth up to 150 mtr. ( Pg.no. 258 I.No. 24.18.3) 6 Nos.
61 61 Labour only for taking out of three phase submersible\npumping set from the tube well with pipe line assembly, electrical cable, testing etc. complete i/c disconnecting the electrical cable from pump & starter . Above 7.5 HP to 12.5 HP - Depth up to 150 mtr. ( Pg.no. 258 I.No. 24.18.3) 6 Nos.
62 62 Supply & errection of ready made mini pump house (control pannel box) GI sheet of 18 gauge of size 90cmx90cmx60cm with 40x40x5mm angle Iron frame to fix it 200 mm below ground level with hold fasts grouted in foundation and 300 mm above ground level for clearance suitable for fixing of conrol pannel, fuse unit, main switch etc. as per aproved specification. 7 Each
63 63 Providing and installation of automatic water level indicator for supervisory control cum auto on/off of motor pump assembly inclusive of control panel ,500 mtr long 2 core, 4 pair cable for small rural water supply scheme, having source within 500mtr as per approved specification and as directed by Engineer in charge. (In case of lesser length of cable,equivalent amount @ Rs 12 /- per meter of short length will be deducted from above rate) USOR. Item.no.17.11.-P.no. 226 8 Each
64 64 Providing and installation of automatic water level indicator for supervisory control cum auto on/off of motor pump assembly inclusive of control panel ,500 mtr long 2 core, 4 pair cable for small rural water supply scheme, having source more than 500 mtr within 10 km as per approved specification and as directed by Engineer in charge. (In case of lesser length of cable,equivalent amount @ Rs 12 /- per meter of short length will be deducted from above rate) USOR. Item.no.17.12.-P.no. 226 1 Each
65 65 Providing and Installation of sensor based auto cutoff system for dry run condition of submerssible pump as per approved specification and as directed by Engineer incharge Ammendment no. 33 dt. 07/02/2013 Item no. 17.16 (if applicable)\n 10 Nos.
66 66 Provision for inter connection of old to new pipe line with excavation of trench as per requirement of any diameter & type of pipe line in muddy area i/c dewatering the trench laying & jointing of pipe and specials, back filling the trench i/c testing of joints cost of labour & specials such as D- Joins couplers, solvent cement etc, complete job work as per approved specification and as directed by Engineer in charge . 90 mm / 110 mm 45 Nos.
67 67 Design, drawing, construction, testing and commissioning of Elevated Service Reservoir/ Over Head Tank (ESR/OHT) with all necessary fitting as mentioned in relevant chapter of USOR, IS codes and departmental guidelines. Complete turn key job for following capacities with 9/12/15 meter staging height from GL :- 50 Kilo Leters /12 meter Staging ( Item No. 26.1.2) 2 Job
68 68 Design, drawing, construction, testing and commissioning of Elevated Service Reservoir/ Over Head Tank (ESR/OHT) with all necessary fitting as mentioned in relevant chapter of USOR, IS codes and departmental guidelines. Complete turn key job for following capacities with 9/12/15 meter staging height from GL :- 100 Kilo Leters /12 meter Staging ( Item No. 26.1.2) 1 Job
69 69 Design, construction, testing and commissioning of underground GRS/ RCC sumpwell of 40 KL with Brick masonary pumphouse over this sumpwell (Specifications of Sumpwell and pump house are mentioned in Annexure-E) payment of this item shall be made according to the payment schedule given in SCC.USOR 2nd ADDENDUM OF Issued vide order no. 254 dt 06.08.2020 Item.no.26.2.1-P.no. 17 2 Job
70 70 Design, construction, testing and commissioning of underground GRS/ RCC sumpwell of 20 KL with Brick masonary pumphouse over this sumpwell (Specifications of Sumpwell and pump house are mentioned in Annexure-E) payment of this item shall be made according to the payment schedule given in SCC.USOR 2nd ADDENDUM OF Issued vide order no. 254 dt 06.08.2020 Item.no.26.2.1-P.no. 17 1 Job
71 71 Design and Construction of RCC framed brick masonry pump house over the sump with all necessary fitting and requirement as mentioned in relevant chapter of USOR, IS codes and departmental guidelines. Complete turn key job. This item will only be used with item no 26.2 only in cases where pumphouse to be constructed above the proposed sumpwell ..USOR 2nd ADDENDUM OF Issued vide order no. 254 dt 06.08.2020 Item.no.26.3 -P.no. 18 3 Job
72 72 Supply, delivery, erection and commissioning of the micro processor based water disinfection equipment using silver ionization process based on Oligodynamic technology as per detailed specifications mentioned in the NIT, Capacity 15000 LPH. 3 Nos.
73 73 Supply, delivery, erection and commissioning of the micro processor based water disinfection equipment using silver ionization process based on Oligodynamic technology as per detailed specifications mentioned in the NIT, Capacity 10000 LPH. 3 Nos.
74 74 Provision for Jointing of TW to Rising Main with cost of material / Specials such as GI Union /CI Flange, GI Reducer,50 mm NRV, UPVC MTA,FTA etc as per requirement of Site i/c cost of labour etc complete.as per approved specification and as directed by engineer incharge. USOR. Item.no.17.19-P.no. 228 9 Job
75 75 Provision for Jointing of Rising Main to Sumpwell/ OHT and OHT to Distribution Pipe Line with cost of material / Specials such as Bends,MTA,FTA,Tee,flange,etc as per requirement of Site with excavation , labour as per requirement complete.as per approved specification and as directed by engineer incharge. USOR. Item.no.17.20-P.no. 229 8 Job
76 76 Fabrication, providing and fixing of typical information board of size 2.40 m x 1.80 m made out as detailed below -\n1. Three vertical support made out from 100 mm x 50 mm , 6.0 mm thick channel. This shall be minimum 1.0 m below GL and 3.00 m above GL. The Channel shall be erected on 600 mm x 600 mm x 1000 mm foundation blocks at appropriate depth made of cement concrete 1:2:4.\n2.The board shall be fabricated from 1.6 mm thick MS sheet of size 2.40 m x 1.80 m, The frame of board shall be fabricated with 50 mm x 50 mm x 5 thick angle with one horizontal additional support in center with same angle.\n3. Whole structure shall be painted by standard color with lettering border, heading and logo etc using synthetic enamel paint of superior quality including welding, excavation,concreting , painting of base, border and lettering, painting and other required details etc complete as directed by Engineer in charge.USOR Amdt II 17.47/Page 7 6 Job
77 77 Earth work in excavation by mechanical means (Hydraulic excavator )/ manual means over areas (exceeding 30cm in depth. 1.5m in width as well as 10 sqm on plan) including dressing of\nsides and ramming of bottom disposal of excavated earth, lead upto 50m and lift upto 1.5m, disposed earth to be levelled and neatly dressed. (No extra lift is payable if work is done by mechanical means) - All kinds of soil. MPPWD SOR Item 2.6 page 22 \n 79.2 Cum
78 78 Earth work in excavation/ by mechanical means (Hydraulic Excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5m in width as well as 10 sqm on plan) including dressing of sides and ramming of bottom disposal of excavated earth, lead upto 50 m and lift upto 1.5 m, disposed earth to be levelled and neatly dressed. - Ordinary rock MPPWD SOR Item 2.7.1 page 22 \n 19.8 Cum
79 79 Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding including cost of binding wire up to floor two level including all wastage etc. complete.Thermo-Mechanically Treated bars.(TMT) MPPWD SOR Item 5.16.6 page 68 2407.17 Kg
80 80 Finishing walls with Acrylic Smooth exterior paint of required shade :Old work ( two or more coats applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/ 10sqm) 786.86 Sqm
81 81 Water proofing treatment over roof.wall.chajjas balcony with diamond shield and sealer coat or equivelent at leakage/seepage area consisting of(i) surface preparation roughening of surface,opening of cracks in 'V' groove in size of 5mmx100mm (WxD),filling of cracks with putty of Diamond shield with laying fiver glass mesh,Cleaning of surface by scrubbing with steel wier/ Nylon brush.Removing all dust particles and washing with adequate water to clean completly.(ii) Providing and applying 1st coat of diamond shield or equivelent (mini. thickness 70-80 micron) (a two component flexible waterproof and protective modified mortar,dry powder 80% chemical 20% acrylic resign having 30% solid contents) with mix proportion of part1 and 2 with proper mixing with laying of fiber glass mesh (of weaving size of 10x10 yarn/inch duly coated with alkaline resistant polymer). Allow the coating to air cure for minimum 2 Hrs.(Diamond Shield or equivelent.After two hours minimum of 1st coat applying 2nd coat (minimum thickness 100 micron) of diamond shield or equivelent with mix proportion of part 1 and part 2 with proper mixing.Allow the coating to air cure for minimun 2 Hrs.Consumption of the diamond shield or equivelent should be @ 17.90 kg for 10sqm area.(After two coats of diamond shield,surface is to be cured properly minimum for 4 Hrs,before application of third coat).(iii) Providing and applying 1st coat of sealer coat 50-60 micron (single component High Build elastometric,flexible,pure acrylic waterproofing membrans having solid content of 65% and allow it to air cure for 4 Hrs minimum.After two hours minimum of 1st coat applying 2nd and final coat 120-140 micron of sealer coat and allow it to air cure for 4 Hrs minimum.Consumption of sealer coat should be @5.40 kg per 10 sqm area.(iv) The treated area should ne cure with water for 48 Hrs by flooding the surface.(v) The final appearance of the coating will be milky white.All above operations to be done in order. 150.63 Sqm
82 82 Reinforced cement concrete work (with 20mm nominal size graded stone aggregate) in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, posts and struts etc. above plinth level and up to floor two level excluding cost of centering, shuttering, finishing and reinforcement : M 20 -Grade Concrete MPPWD SOR Item 5.2.1 page 65 33.59 Cum
83 83 Centering and shuttering including strutting, propping etc. and removal of form for : Walls (any thickness) including attached pilasters butteresses, plinth beams and string courses etc.up to plinth level. MPPWD SOR Item 5.9 page 66 134.4 Sqm
84 84 Lintels, beams, girders, bressumers and cantilevers. - Coping sides MPPWD SOR Item 5.9.5 page 66 31.8 Sqm
85 85 Foundations, footings, bases of columns, etc. for concrete up to plinth level. MPPWD SOR Item 5.9.1 page 66\n 94.8 Sqm
86 86 Columns, Pillars, Piers, Abutments, Posts and Struts. MPPWD SOR Item 5.9.6 page 66 74.52 Sqm
87 87 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :With 20mm nominal size graded stone aggregate.Nominal Mix -1 Cement : 3 sand : 6 graded stone aggregate (M 10)\nMPPWD SOR Item 4.1.1.4 page 45\n 6.6 Cum
88 88 Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters,columns, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets etc. up to floor two level, excluding the cost of centering, shuttering and finishing : With 20mm nominal size graded stone aggregate.M 20 - Grade concrete - Coping MPPWD SOR Item 4.2.1.2 page 45 3.18 Cum
89 89 Brick work with well brunt open bhatta, bricks, crushing strength not less than 25kg / cm2 and water absorpt ion not more than 20% in superstructure above plinth level and up to floor two level i/c curing etc complete.Cement Mortar 1:6 (1 cement : 6 sand) MPPWD SOR Item 6.6.2 page 85 42.93 Cum
90 90 12 mm cement plaster of mix :1:6 (1 cement : 6 sand) MPPWD SOR Item 13.1.2 page 244 632.7 Sqm
91 91 Filling available excavated earth (excluding hard rock/Ordinary rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. MPPWD SOR Item 2.25 page 26\n 73.34 Cum
92 92 Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting,hoisting, fixing in position and applying a priming coat of approved steel primer all complete. MPPWD SOR Item 10.2 page 178\n 450 Kg
93 93 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade:Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture. MPPWD SOR Item 13.69.1 page 252\n\n 13.5 Sqm
94 94 Providing and laying 60 mm thick factory made cement concrete interlocking paver block of M-30 grade made by block making machine with strong vibratory compaction, of approved size, design and shape, laid in required colour and pattern over and including 50 mm thick compacted bed of stone dust, filling the joints with sand etc. all complete as per the direction of Engineer-in charge . MP PWD SOR No. 11.75 P. NO. 210 675 Sq.M.
95 95 11 KV line on 140 kg. 8.0 Mtrs. long PCC Poles with rabbit conductor average span of 70 mtr. in rural area. (Schedule Ref. C-1.2 of MPMKVVCL for SOR - 2019-20) 1.1 Km
96 96 11 KV D.P. Structures on 140 kg. 8.0 mtr. long PCC poles for tapping DP. (Schedule Ref. C-5.2 of MPMKVVCL for SOR - 2019-20) 6 Each
97 97 11 KV D.P. Structures on 140 kg. 8.0 mtr. long PCC poles for straight line. (Schedule Ref. C-5.1 of MPMKVVCL for SOR - 2019-20) 5 Each
98 98 L.T. Line 1 phase 3 wire on PCC support using Aerail Bunched XLPE cable with maximum span of 50 Meter. 2 x 35+ 1 x 16 sq. mm (Insulated nuetral massenger) (Schedule Ref. D-3.2 of MPMKVVCL for SOR 2019-20) 1.2 Km
99 99 11/0.4 KV out-door type transformer sub-station. (Schedule Ref. E-1.1 of MPMKVVCL for SOR 2019-20) 25 KVA on 140 kg. 8.0 meter long PCC Pole 6 Each
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail