}

Provision Of Energy Efficient Led Fittings As As Stair Case For Omq Post Top Lantern Led Fittings At Shopping Complex Transit Block At North Camp And Spl Repairs To Wiring In Single Living Accn For Officers At Tom Bldg P76 P77 To Tom Certain Sa, BAMRAULI-Uttar Pradesh

Military Engineer Services-MES has published Provision Of Energy Efficient Led Fittings As As Stair Case For Omq Post Top Lantern Led Fittings At Shopping Complex Transit Block At North Camp And Spl Repairs To Wiring In Single Living Accn For Officers At Tom Bldg P76 P77 To Tom Certain Sa. Submission Date for this Tender is 20-01-2021. Electrification Work Tenders in BAMRAULI Uttar Pradesh. Bidders can get complete Tender details and download the document.




Tender Notice

26458152
Provision Of Energy Efficient Led Fittings As As Stair Case For Omq Post Top Lantern Led Fittings At Shopping Complex Transit Block At North Camp And Spl Repairs To Wiring In Single Living Accn For Officers At Tom Bldg P76 P77 To Tom Certain Sa
Open Tender
Indian
Uttar Pradesh
BAMRAULI
20-01-2021

Tender Details

Provision Of Energy Efficient Led Fittings As As Stair Case For Omq Post Top Lantern Led Fittings At Shopping Complex Transit Block At North Camp And Spl Repairs To Wiring In Single Living Accn For Officers At Tom Bldg P76 P77 To Tom Certain Sa

Key Value

Document Fees
INR 500 /-
EMD
INR 92000.0 /-
Tender Value
Refer document

BOQ Items

Name of Work: PROVISION OF ENERGY EFFICIANT LED FITTINGS, AS & AS STAIR CASE FOR OMQ, POST TOP LANTERN LED FITTINGS AT SHOPPING COMPLEX & TRANSIT BLOCK AT NORTH CAMP AND SPL REPAIRS TO WIRING IN SINGLE LIVING ACCN FOR OFFICERS AT TOM, BLDG P76 & P77 TO TOM & CERTAIN SANCTIONED WORKS UNDER GE AF BAMRAULI
Sl. No. Item Description Item Code / Make Quantity Units
1 1 Dismantling floor any type, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and directed. 200 Sqm
2 2 Demolition of cement concrete (unreinforced ) in above ground floors exceeding 15 cm thickness complete all as specified and directed. 3 Cum
3 3 M&L for complete removing of existing treatment on wall surface and applying two coats of oild bound distemper including a coat of 1.5 mm thick white wall care putty on wall surfaces to obtain smooth finish as required complete all as specified and directed. 600 Sqm
4 4 M & L for preparation of old wooden surfaces and applying two coats of synthetic enamel paint of any description over 10 cm width or girth over a coat of pink primer complete all as specified and directed. 40 Sqm
5 5 M & L for preparation of new steel surfaces and applying two coats of synthetic enamel paint of any description over 10 cm width or girth over a coat of red oxide primer complete all as specified and directed. 170 Sqm
6 6 S & F non-skid heavy duty floor tiles of size 300mm x 300 mmx 110 mm thick, coloured joint free in floors etc set and jointed in neat cement slurry and pointed in coloured cement to match with the shade of tiles laid over and including 15 mm thick screed in cement mortar 1:6 complete all as specified and directed 200 Sqm
7 7 S&F non-skid heavy duty tiles of size 300mm x 300 mmx 10 mm thick, coloured, joint free as in vertical surfaces such as skirting/dado on riser of stair case etc set and jointed in neat cement slurry and pointed in coloured cement to match with the shade of tile fixed over and including 10 mm thick backing coat in cement mortar 1:4 complete all as specified and directed 50 Sqm
8 8 M & L for plain cement concrete 1:4:8 type D-2 (Using 40 mm graded stone aggregate) as in sub base / mass concrete complete all as specified and directed. 5 Cum
9 9 M&L for 40 mm thick PCC 1:2:4 type B-2 (Using 40mm graded stone aggregate) as in floorings, finished the concrete surface with spike rolling or making impressions of expanded metal, whilst the concrete is green complete all as specified and directed. 50 Sqm
10 10 Taking down chowkhat or frame with shutters (without taking off shutters from the frame) n. exc. 1.5 Sqm each complete all as specified and directed. 5 Each
11 11 Taking down chowkhat or frame with shutters (without taking off shutters from the frame) exceeding 1.5 Sqm but not exceeding 4.0 Sqm each complete all as specified and directed. 2 Each
12 12 S&F aluminium powder coated sliding window in three leaf sliding including aluminium powder coated frame, rollers, aluminium powder coated of section 62.5x37x2.5 mm thick shutter with bottom & middle rail of section 112.5x37x2.5mm and style & top rail of section 83x37x2.5mm thick with centrally locking arrangement with lock rail of rebate including jointing cleats, aluminium powder coated builder’s hardware as necessary and gazing with 5.5mm thick ordinary plain sheet glass including aluminium wire mesh shutter including all fittings/fixtures & aluminium snap beads etc complete all as specified and directed. 21 Sqm
13 13 Excavation in post holes (or similar holes) each not exceeding 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around in layers not exceeding 25cm as in hard/ dense soil complete all as specified and directed. 8 Each
14 14 S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering to wall fixed with self tapping screws complete all as specified and directed. 460 Sqm
15 15 S&F Pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws complete all as specified and directed. 20 Sqm
16 16 S&F structural steel work in tubular or angle as in purlins/rafters including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I.S 1161-1979 St grade St-240 complete all as specified and directed. 3100 Kg
17 17 M&L for rolled mild steel sections as plate girder or single stanchions, built up of one beam or channel section with flange plates, caps, bases splices angle brackets cleats and other connections confirming to Fe 410 -W (GdeE- 250) quality complete all as specified and directed. 460 Kg
18 18 M&L for plain cement concrete 1:2:4 type B-2 (Using 40mm graded stone aggregate) as foundation, filling and mass concrete for post holes complete all as specified and directed. 1.73 Cum
19 19 M&L for brick work with sub-class 'B' bricks, straight or curved on plan exceeding 6M mean radius, built in cement mortar 1:6 complete all as specified and directed. 5 Cum
20 20 M&L for 15mm thick rendering in CM 1:4 on fair faces of brick work/concrete surfaces finished even and smooth without using extra cement complete all as specified and directed. 50 Sqm
21 21 M&L for preparation of new plastered surfaces of walls and applying two coats of cement base paint over a coat of primer complete all as specified and directed. 50 Sqm
22 22 Demolition of brick work or stone masonry built in cement mortar including all quoins, arches, pillars etc complete. complete all as specified and directed. 2 Cum
23 23 Taking down carefully aluminium batten point, wiring for light/fan/socket/bell or power point including all fittings i.e. switches, sockets, ceiling rose, regulators, batten holders, etc complete and making good disturbed surfaces of wall/floor to match with the surroundings of wall/ceiling/floor etc including taking down old light fittings complete all as specified and as directed. Note :- (i) The unit rate quoted is deemed to be inclusive of unscrewing of the serviceable fittings and fixtures as directed and deposit in MES store yard and cost of cutting chases for taking out concealed conduit and ditch for terminal box. (iii) Decision of GE shall be final and binding in respect of serviceability of fittings/fixtures. (iv) Exhaust fan and ceiling fan shall be taken down separately under relevant item of this schedule. 871 Per point
24 24 M & L for point wiring complete with PVC insulated unsheathed stranded copper conductor cable 1.5 sqmm (FRLS)(nominal area) in and including PVC casing & caping not less than 20mm width heavy grade ISI marked complete with all the accessories including press fit PVC box for mounting switches & socket Two run of 1.5 Sqmm PVC insulated unsheathed stranded copper conductor cable as Phase & neutral and one run for continuous earth wire connected to common earth dolly complete all as specified and directed for the following : Note:- (i) The unit rate quoted is inclusive of cost of cutting chases on wall for concealing conduit, metal box, grid plate and base plate. (ii) Colour coding of wire shall be strictly adhered ie Red for phase black for neutral and green for earth wire.(a) One light/fluorescent tube light/fan/bell point controlled by one switch single pole one way complete all as specified and directed 490 Per point
25 25 All as per Sl Item No. 24 above but One 3 pin 5 amp switch socket out let on independent board complete all as specified and directed. 70 Per Point
26 26 All as per Sl Item No. 24 above but One 3 pin 5 amps socket outlet on the same board with other switch complete all as specified and directed. 30 Per Point
27 27 All as per Sl Item No. 24 above but One 3 pin 5 Amps socket out let independent but below the switch board of light point in the same vertical plane complete all as specified and directed. 30 Per Point
28 28 All as per Sl Item No. 24 above but One light point controlled by two 2-way switches complete all as specified and directed. 20 Per point
29 29 All as per item No. 24 above but using two runs 4.0 sq mm size for main cable and one run of 4.0 sq mm size as earth conductor for one 16 amps switch socket outlet on independent board complete all as specified and directed. 99 Per Point
30 30 S&F switch piano flush type, single pole one way, 5 Amp complete all as specified and directed. 588 Each
31 31 S&F socket out let 2/3 pin 5 Amps 240 volt flush type complete all as specified and directed. 130 Each
32 32 S&F socket outlet 3 pin, 15 amp 240 volt 50 Htz complete all as specified and directed. 80 Each
33 33 S&F switch piano 15 Amp 240 volt 50 Htz complete all as specified and directed. 99 Each
34 34 S&F ceiling rose, surface bakelite, 65 x 50 mm, three terminals complete all as specified and as directed. 318 Each
35 35 S&F calling bell AC ding dong 220 volt multi music on wooden board complete all as specified and directed. 43 Each
36 36 S&F modular bell push AC 220 volts single phase complete all as specified and directed. 43 Each
37 37 S&F in replacement Sub main wiring with 2 run of single core PVC insulated and PVC Unsheathed, multi stranded copper conductor of nominal area 6 Sqmm FRLS, 1100 Volts grade cable drawn into and including PVC casing caping including all fittings and one run of PVC insulated and PVC unsheathed, multi-stranded copper conductor of nominal area 4 Sqmm FRLS 1100 volts grade cable continuous earth wire of green colour code complete. Note:- (a) Two runs of 6.0 sqmm cable and one run of 4 Sq mm cable as earth lead with conduit shall be measured as one unit length for payment complete all as specified and directed.(b) Quoted rate shall deem to be included cost of cutting chases in wall for concealed conduit and making good to match with existing finish. 360 RM
38 38 S&F wall mounted LED batten with aluminum housing provided for heat dissipation & integrated electronic driver with polycarbonate diffuser 4 feet long 22 watt 240 volt prewired dimension (1182x23x37mm) complete all as specified and directed. Make :- Havells Cat part No-Endura liniar BS22WLED 840 PCSS [or] techno commercially equivalent model in Philips/Crompton/Wipro 178 Each
39 39 S&F wall mounted LED batten with aluminium housing & integrated electronic driver 2 feet long 10 watt 240 volt prewired dimension (600x108x62mm) complete all as specified and directed. Make:- Havells Cat Part No.Lumiline plus BS10WLED 840SPCWH [or] techno commercially equivalent equivalent model in Philips/Crompton/Wipro 60 Each
40 40 S&F wall mounted decorative fancy type bedroom light LED type with frosted glass mounted on metallic frame with holder including 12 watt LED bulb complete all as specified and directed. Make: Philips Cat Part No.31434 [or] techno commercially equivalent equivalent model in Bajaj/Havells/Crompton/Wipro 60 Each
41 41 S&F connecting and testing LED street light 25 watt 6000k new generation energy saving and environmental friendly long life versatile pressure die cast aluminum housing IP-66 roadway luminaries with high power LED as light source and electronic driver complete with connection and accessories for fixing with including grade 40mm dia GI pipe as bracket in appropriate length complete including taking down old light fitting complete all as specified and directed. Make : Philips/Havells/Wipro/Crompton 85 Each
42 42 S&F factory made sheet metal enclosure distribution boards, (protection class IP-42) double door, vertical type suitable for mounting MCCBS/ MCBs conforming to IS : 13032, IS : 8623, BS : 5484 with 200 Amps rating copper bus bar, triple pole and neutral, 8 ways, 415 volts complete all as specified and directed. \nNote :- MCBs and MCCBs will be measured and paid separately under respective item of this schedule. 2 Each
43 43 S&F factory made sheet metal enclosure distribution boards, (protection class IP-65) double door, vertical type suitable for mounting isolator fixing MCBs conforming to IS : 13032, IS : 8623, BS : 5484 with 200 Amps rating copper bus bar, SP and N, 12 ways, 240 volts, complete all as specified and directed.\nNote : MCBs shall be measured and paid for separately under respective item of this schedule.\n 15 Each
44 44 S&F MCB, SP, 6 to 32 Amp rating, 230 volt, 10 KA, 'C' series complete all as specified and directed. 70 Each
45 45 S&F MCB, SP, 230 volts, 35 to 63 Amp rating, 10 KA, C series complete all as specified and directed. 80 Each
46 46 S&F MCB, single pole and neutral, 230 volts, 35 to 60 Amp rating, 'C' series complete all as specified and directed. 15 Each
47 47 S&F MCCB, four pole, 415 Volt ,125 Amp rating, 25 KA ultimate breaking capacity complete all as specified and directed 2 Each
48 48 Earthing complete with galvanized steel earth plate electrode 60 x 60 cm x 6 mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to galvanized iron wire 4mm dia as earth lead wire by means of bolts, nuts, check nuts and washers of galvanized iron or steel all as shown in Electrical plate No. 3, MES SSR Part I- 2009 with 15 mm dia medium grade GI pipe as a protection to earthing lead and 20 mm dia medium grade GI pipe for watering purpose including excavation & earth work in any type of soil, funnel, wire mesh, RCC pit with cover, cast iron frame complete and connected to earthing test point all as specified or indicated including testing on completion. Notes (i) The concrete pit shall be PCC (1:3:6) type C-1, 40mm thick precast cover slab of RCC with suitable Mild steel handle in lieu of cast iron cover shown in electrical plate No 3 of MES SSR Part-I(ii) PCC pit shall be provide at least 500 mm away from the earth pit and not on just on the earth pit and extra cost of additional length of water pipes and fittings junction etc shall be deemed to be included in the rate. (iii) Item includes the cost of 7.5 metre earth lead wire and GI pipe for protection of earth wire. Any variation in quantity shall be adjusted. 10 Job
49 49 S&F in replacement of Exhaust fan, copper wound winding of 300mm sweep,1400 RPM, 230 volts,50 Hz, single phase complete with louvers, clamps, nuts and bolts and fan blades of suitable size including dismantling the defective exhaust fan from site and shifting the same to MES store yard all as specified and directed Make : Havells Model No Turbo Force SP (or) techno commercially equivalent model in Usha/Crompton Greaves/Orient 32 Each
50 50 S&F AC starter unit consisting of one 25 Amp capacity starter, one 240 volt 15 Amp 10KA SPN MCB one 25 Amp socket and one 15 Amp plug top prewired complete all as specified and directed. Make: L&T/ABB/schneider/Siemens/Legrand 32 Each
51 51 S&F ceiling fan 1200mm sweep with all standard accessories and necessary materials, erected in provided hook/clamp. Material : ceiling fan : electric Ceiling fan capacity type with double ball bearing complete with capacitor, 300 mm down rod, canopies, shackles, reel insulator, half threaded bolts of 9.53mm (3/8") dia 62.5 mm (2-1/2") to 88mm (3-1/2") long and 7.94 mm (5/16") dia 44.5 mm (1-3/4) to 57 mm (2-1/4") long with nuts, with lock type split pin spring & plate washers etc, three number blade made of Aluminium alloy suitable for single phase, AC 210 volts, 50 Hz supply and conforming to class I to IS : 374/1979 with amendment no 1 to 6 expect for performance parameters to the extent modified as details in general requirements > the down rod shall be capable to withstand a tensile load of 1000 kg without break down and a torsion load of 500 Kg/cm without breakage as per clause 10.14.1 of IS : 374/1979 with amendment no 1 to 6 Electrical motor should be single phase permanent capacitor type with no. of pole 12/14/16/18(as per sweep). Class-1 with basic insulation. class of insulation shall be B class. The binding wire used for fan should be copper wire, synthetic enameled of 30 to 38 SWG. Connection wire : Flat/round two core flexible stranded copper wire cord 23/0.2 mm ISI marked. Paint superior quality enamel paint of specified colour for marked Sr . No and date of erection of 1200mm sweep, maximum input power 50 watts air delivery 215 cubic meter per minute Make USHA/CROMPTON GREAVES/HAVELLS/BAJAJ/ORIENT. Old unserviceable fan shall be deposited in MES store 32 Each
52 52 Excavation in trenches not exceeding 1.5 mtr wide and not exceeding 1,5 mtrs in depth for laying of cables including getting out in any kind of soil complete all as specified and directed. 13 Cum
53 53 Returning filling in including spreading, leveling ,and well ramming, in layers not exceeding 25 cm each layer of any kind of soil complete all as specified and directed. 8 Cum
54 54 Removing surplus excavated soil/material from site not exceeding 50 mtrs from starting point and depositing where directed at level not exceeding 1.5 mtr above the starting point complete all as specified and directed. 5 Cum
55 55 Supply and lay clean dry river bed sand for sand cushioning for cables 8 cm below the cable and 15 cm above the cable complete all as specified and directed. Note : Punned thickness will be measured and paid. 4 Cum
56 56 Supply and lay old size brick well burnt, laid flat ,for cable protection complete all as specified and directed. 430 Each
57 57 M&L for replacement of GI tubing light grade 50 mm bore for passing through cables under the floor ,along the wall or along the pole complete all as specified and directed . 10 RM
58 58 Supply and laying in trenches 2 Core 10 Sqmm size, XLPE Insulated galvanized steel strip armoured electric power cables(heavy duty)1100 volts grade with stranded aluminum conductor complete all as specified and directed. 200 RM
59 59 S&F modular switch 2 way 6 Amp 240 volt one module complete all as specified and directed. 40 Each
60 60 S&F socket out let 2 in 1, 3 pin 5 & 15 Amps flush type complete all as specified and directed. 19 Each
61 61 S&F bulkhead fitting environmental friendly, ultra modern, energy saving, surface mounted, decorative oval bulkhead edge lit LED luminaire comprising of high brightness LEDs of 10 watt complete all as specified and directed. Make : Crompton Cat part No- LBHP-10-CDL [or] techno commercially equivalent model in Philips/Havells/Wipro 150 Each
62 62 S&F decorative LED fittings with LED lamp opal glass shade esthetic look with premium synthetic and metal combination including 10 watt LED bulb including connection and fixing arrangement complete all as specified and directed. Make : Philips Cat part No-45617/17 base colour chrome [or] techno commercially equivalent model in Crompton/Havells/Wipro 200 Each
63 63 Fixing only LED Tube rod fittings 4 feet long surface / wall mounted LED batten extruded aluminium housing provided for efficient heat dissipation with polycarbonate diffuser and integrated electronic driver 20 watt including tube rod. \nNote:- Tube rod 4 feet long will be issued under Sch 'B' free for fixing.\n 1000 Each
64 64 S&F LED batten extruded surface mounting fitting 2 feet long aluminium housing 10 watt input voltage 220 volt inbuilt LED and driver complete all as specified and directed. Make: Philips Cat Part No-BN021LED 10S [or] techno commercially equivalent model in Crompton/Havells/Wipro 200 Each
65 65 S&F surface mounted round 12 watts LED down lighter with dome shape opal diffuser suitable for indoor use 240 volts complete all as specified and directed. Make: LED Bajaj Cat No. BGCML 12W WH [or] techno commercially equivalent model in Crompton/Havells/Philips/Wipro 100 Each
66 66 Fixing only LED tube rod 4 feet long of 20 watt ultra bright polycarbonate/glass tube light with very high efficiency single side connection situated for installation in existing T5/T8 with G13 Lamp holder complete all as specified and directed.\nNote:- Item will be issued under sch 'B' free for fixing 700 Each
67 67 M & L for point wiring complete with PVC insulated unsheathed stranded copper conductor cable 1.5 sqmm (FRLS)(nominal area) in and including concealed PVC conduit not less than 20mm outer dia med grade ISI marked complete with all the accessories including pressed steel concealed terminal box suitable for Modular switch outlet 1.5 Sqmm PVC insulated unsheathed stranded copper conductor cable as continuous earth wire connected to common earth dolly complete all as specified and directed for the following :- One light point/fan/Exhaust fan point controlled by one switch complete all as specified and directed. 106 Per point
68 68 All as per Sl Item No. 67 above but one 3 pin 5 amps switch socket outlet on independent board. 11 Per point
69 69 All as per Sl Item No. 67 above but one 3 pin 5 amps switch socket outlet on the same board with other switch complete. 11 Per point
70 70 All as per Sl Item No. 67 above but 2 runs of 4 Sqmm copper conductor as main cable and 01 run of 4 Sqmm copper conductor as earth wire for one 16 Amps switch socket outlet on independent board. 22 Per point
71 71 S&F Modular Switch flush type single pole one way 6A, 230 Volts complete all as specified and directed. 238 Each
72 72 S&F Modular Switch flush type single pole one way 15/16A, 240 Volts complete all as specified and directed. 22 Each
73 73 S&F Modular Switch socket 6 Amps 2 in 1 2/3 pin combined (Two module) complete all as specified and directed. 77 Each
74 74 S&F Modular Switch socket 16 Amps 2 in 1 3/5 pin combined (Two module) complete all as specified and directed. 22 Each
75 75 S&F Modular type, Electronic step type fan regulator 240 Volts 50 Hz 120 watts (Swich/socket type in shape) complete all as specified and directed. 22 Each
76 76 S&F 2'x2' feet LED fitting of 36 watt 150 lumen/watt 6500k with white powder coated CRCA housing with high power LEDs with aluminium front frame with flat white high transmission acrylic cover complete all as specified and as directed. \nMake : Havells Cat No. LHECDIL7PP1W036/Crompton cat No. LCPL-36-CDL(2X2) or equivalent model in Philips/Wipro\n 18 Each
77 77 S&F in replacement of 15 Watts LED post top lantern new generation, post-top energy saving environmental, long life aesthetically designed with symmetrical light distribution spun aluminium landscape with high power LEDs as light source complete all as specified and as directed. \nMake : Havells Model No. CORALMINIPT15LED757PSYMTOPC (or) techno commercially equivalent model in Philips/Wipro/Crompton/Bajaj as approved by GE\n 20 Each
78 78 S&F in replacement of LED bulb 2 pin type 7 W complete all as specified and directed. Make : Philips/Havells/Wipro/Crompton/Bajaj\n\n 20 Each
79 79 S&F Junction box for sign board light control made of PVC/SMC/FRP box of size 300x2500x150 mm and connected MCB SP 40 Amps including necessary clamps, nuts, bolts etc as required complete all as specified and directed. \nMake :Sintex/Rajshree\n 20 Each
80 80 Fixing only window type AC unit of 1.5 ton capacity including necessary connections and making good the disturbed surfaces to match with the existing finish complete all as specified and directed .\nNote :- Window type AC unit will be issued under Sch 'B' free for fixing\n 2 Each
81 81 S&F Voltage stabilizer for automatic operation, single phase naturally air cooled indoor/outdoor type, Built-In thermal overload protection, low & high voltage cut-o? protection & designed for input variation between 150 V to 285 V with output voltage stabilized at 230 Volts with accuracy of ± 2.5% and of capacity 5 KVA complete all as specified and directed.\nMake:- V GUARD(Model No: VND500) / BLUEBIRD(Model No:BA514A) (or) equivalent make/model as approved by GE.\n 2 Each
82 82 S&F sheet metal enclosure with socket with two pin and earth plug, plug top and MCB SP 32 Amps, 230 volts, fixing to the wall surface or making suitable size of hole in the wall wherever its required and making good the disturbed surface as per existing finish complete all as specified and directed. Make : L&T/Havells/ABB/Seimens/C&S/Legrand\n\n\n 2 Each
83 83 S&F Sub main wiring with 2 run of single core PVC insulated and PVC Unsheathed, multi stranded copper conductor of nominal area 6 Sqmm FRLS, 1100 Volts grade cable drawn into and including rigid non-metallic PVC conduit including all fittings and one run of PVC insulated and PVC unsheathed, multi-stranded copper conductor of nominal area 4 Sqmm FRLS 1100 volts grade cable continuous earth wire of green colour code complete all as specified and directed. Note:- (a) Two runs of 6.0 sqmm cable and one run of 4 Sq mm cable as earth lead with conduit shall be measured as one unit length for payment (b) Quoted rate shall deem to be included cost of cutting chases in wall for concealed conduit and making good to match with existing finish. 60 RM
84 84 S&F Rigid non-metallic PVC conduit exclusive of boxes (junction/ terminal) but inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc. complete all as specified and directed. Note:- (b) Quoted rate shall deem to be included cost of cutting chases in wall for concealed conduit, laying existing copper wiring in conduit and making good to match with existing finish as specified and as directed by Engineer-in-Charge. 40 RM
85 85 S&F Modular white cover plate with frame for 02 Module complete all as specified and directed. 24 Each
86 86 S&F Modular white cover plate with frame for 04 Module complete all as specified and directed. 48 Each
87 87 S&F Modular white cover plate with frame for 08 Module complete all as specified and directed. 24 Each
88 88 S&F Modular metal flush box for 02 Module complete all as specified and directed. 24 Each
89 89 S&F Modular metal flush box for 04 Module complete all as specified and directed. 48 Each
90 90 S&F Modular metal flush box for 08 Module complete all as specified and directed. 24 Each
91 91 Taking down carefully by unscrewing from boards/ outlet boxes, fittings and fixtures such as switches, sockets, ceiling roses, lamp holders, brackets, ceiling fittings, bulk head fittings, tube light fittings and regulators, etc. for reuse at site or carrying to the store (To be measured only when found serviceable in all respects complete for reuse) complete all as specified and directed. 440 Per point
92 92 S&F LED fitting of 20 watt 4 feet long Decorative ultra slim round profile LED lighting fixture with extruded polycarbonate, environmental friendly, energy efficient ready to use pack including the taking down old u/s one complete all as specified and as directed Make : Havells Cat No LHEXAPP7IN1W020 (or) techno commercially equivalant model in Crompton/Bajaj/Philips. 55 Each
93 93 S&F LED fitting of 9/10 watt 2 feet long Decorative ultra slim round profile LED lighting fixture with extruded polycarbonate, environmental friendly, energy efficient ready to use pack including the taking down old u/s one complete all as specified and as directed Make : Havells Cat No. LHEXBLP7IN1W009 (or) techno commercially equivalant model in Crompton/Bajaj/Philips. 11 Each
94 94 S&F decorative LED fittings wall mounted with LED lamp opal glass shade esthatic look with premium synthatic and metal combination including 10 watt LED bulb including connection and fixing arrangement Make:Havells Cat No.LHFOECE1TZ1O014 techno commercially equivalant model in Crompton/Bajaj/Philips. 22 Each
95 95 S&F bulkhead fitting enviornmental friendly, ultra modern, energy saving, surface mounted, decorative oval bulkhead edgelit LED luminaire ,IP-66 protection comprising of highbrightness LED Make :Havells cat part No- LHEXCGP7IN5W006 or equivalent of other make Philips/Crompton 11 Each
96 96 S&F Factory made sheet metal enclosure distribution boards, double door, suitable for mounting isolator fixing MCBs conforming to IS & BS with 200 Amps rating copper bus bar, SP and N, 8 ways, 240 volts. \nNote : MCBs shall be measured and paid for separately under respective item of this schedule. 11 Each
97 97 S&F Factory made sheet metal enclosure distribution boards, (protection class IP-42) single door, suitable for mounting MCB conforming to IS & BS : 5484 with 200 Amps rating copper bus bar, triple pole and neutral, 6 ways, 415 volts\nNote :- MCBs shall be measured and paid for separately under respective item of this schedule. 1 Each
98 98 S&F MCB, four pole, 415 Volt ,100 Amp rating, 25 KA ultimate breaking capacity fixed in DBs catered herein before. 1 Each
99 99 S&F MCB, SP, 6 to 32 Amp rating, 230 volt, 10 KA, 'C' series fixed in DBs 66 Each
100 100 MCB, SPN, 230 volts, 35 to 63 Amp rating, 10 KA, C series fixed in DBs 22 Each
101 101 Supply and fixing of Exhaust fan, copper wound winding of 300mm sweep,1400 RPM, 750 CMH,230 volts,50 Hz, single phase complete with louvers, making of hole & grouting nut & bolts and connecting with 3 run of 1.5 sqm, multi core, PVC insulated copper cable from ceiling rose and making good the disturbed surface with existing colour matching complete all as specified and directed :Make :Bajaj Model No FRESHEE MK II or Equivalent in Usha/CG/Havells .\n 11 Each
102 102 S&F OF Fresh air fan, single phase 230 volts of size 200 mm sweep, plastic body with louvers and making of hole & grouting nut & bolts and connecting with 3 run of 1.5 sqm, multicore, PVC insulated copper cable from ceiling rose and making good the disturbed surface with existing colour matching complete. Note :- Fan shall be of Make-Bajaj Model: MAXIMA DX or equivalent model of Havells/CG/Usha 11 Each
103 103 Supply & fix ceiling Fan ,230 Volts, 1200mm sweep,340 RPM, 210 CMM,230 volts,50 Hz, single phase,star rated complete with all accessories for hang and connecting with 3 run of 1.5 sqm, multicore, PVC insulated copper cable from ceiling rose as specified and directed. Note :-i. Fan shall be of Make-Bajaj Model: EXCELSTAR or equivalent model of Havells/CG/Usha.ii. taking down old u/s one and depositing the same in MES store yard & Old unsv fan will be included in condemnation board.\n 11 Each
104 104 supply and fix connecting and testing LED street light 25 watt 6000k new generation energy saving and environmental friendly long life led street light made up of pressure die cast aluminium housing with high efficient led as lighting source and PC cover having toP opening seperate driver compartment with IP66 protection and impact resistance of IK07 roadway luminaries with high power LED as light source and electronic driver complete with connection and accessories for fixing with with including grade 40mm dia GI pipe as bracket in appropriate length complete including taking down old light fitting Note - fitting shall be make Crompton Model No:LSTS-25-CDL or equivalant in Philips/Bajaj/Havells 6 Each
105 105 Supply, laying and testing PVC insulated and FR PVC Round Sheathed, Copper Conductor (flexible) industrial cable, (heavy duty) 1100 Volts grade of size 6.0 sq mm 2 core fixed on wall/floor/roof/ground with conduit or MS clip as directed and specified 50 RM
106 106 Taking down carefully existing ceiling fan and M&L for rifixing the same with nuts, with lock type split pin spring & plate washers etc after paining and oiling/greesing as specified and directed. 11 Each
107 107 Taking down carefully existing storage type water heater(Gyser) and M&L for rifixing the same with nuts and fastners after cleaning and servicing with inlet and outlet pvc pipes as specified and directed. 11 Each
108 108 Note :- Credit shown in credit schedule of tender document shall be considered by the tenderer while quoting the rates of various items. The same shall be recovered from various payment to contractor before handing over old material.
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail