Military Engineer Services-MES has published Addn/ Altn Of Bldg No 22 And 23 For Creation Of Medical Facilities For Covid-19 At Cod Under Ge ( North ) Delhi Cantt-10. Submission Date for this Tender is 09-02-2021. Building Work Tenders in DELHI CANTT Delhi. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 20-Jan-2021 | Amendment No. 1 | Date | 30-01-2021 |
| 2 | 23-Jan-2021 | Amendment No 2 | Date | 04-02-2021 |
| 3 | 28-Jan-2021 | Amendment No 3 | Date | 09-02-2021 |
| 4 | 30-Jan-2021 | Amendment No 3 | BOQ | 09-02-2021 |
| 5 | 05-Feb-2021 | Amendment No 4 | Other | 09-02-2021 |
| Name of Work : ADDN/ ALTN OF BLDG NO 22 & 23 FOR CREATION OF MEDICAL FACILITIES FOR COVID -19 AT COD UNDER GE (NORTH) DELHI CANTT-10 | |||||
|---|---|---|---|---|---|
| Sl. No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | BUILBING WORKS PART-I | 1 | ||
| 2 | 2 | Dismantling of AC sheet roof corrugated/semi corrugated of any description including ridges/gutters etc at height upto 15 mtr complete all as specified and directed. | 2 | 7250 | Sqm |
| 3 | 3 | Demolition of reinforced cement concrete in roof floor (other than ground floors) beams staircase, landing chajja and similar work complete all as specified. | 3 | 5 | Cum |
| 4 | 4 | Demolition of brick/stone masonry built in CM. all as specified. | 4 | 10 | Cum |
| 5 | 5 | S&F 0.80 mm thick PGI sheet as in ridges, hips valley gutters drip and straight, flashing etc having 275 gm of zinc coating per sqm (both side inclusive) fixed with L or J hook or cranked hook bolts up to 15 mtr hight complete all as specified and directed. | 5 | 1430 | Sqm |
| 6 | 6 | M&L for Pre-painted 30 mm thick puf sandwich with density 40 Kg/cum corrugated galvalume aluminum zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws at height upto 15 mtr complete all as specified and directed. | 6 | 6550 | Sqm |
| 7 | 7 | M&L for 6 mm thick PVC ceiling board of prelaminated PVC sheets fixed or laid/ inserted to timber/GI/Aluminium frame work with screws complete all as per manufactureers nstructions and as directed. | 7 | 5800 | Sqm |
| 8 | 8 | S&F GI powder coated frame work of size 605 x 605 mm, for seamless celing comprising of GI perimeter chanel 0.55mm thick with two unequal flanges of 20 and 30 mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre/ intermediate channel 0.9mm thick having two equal flanges of 15mm each and web of 45mm suspended from soffit at approx 900mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exc 1.2m length) of 0.55mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.5mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre complete all as specified and as directed. | 8 | 5800 | Sqm |
| 9 | 9 | S&F structural steel work for rolled sections as in main and cross beams, hips and jack rafters, purlins, running rails and guides for sliding doors, fixed with angle cleats or other connecting plates gde Fe-410-Wat any height complete all as spd and directed. | 9 | 53000 | Kg |
| 10 | 10 | S&F 10 mm thick Toughned glass as in partition/ fixed window including diamond edging all sided , eatching , lining and momnograme area nexc 0.50 Sqm each by sand blasting , including CP " L" or " U" heavy duty clamps suitable for fixing of glass , min 4 mos per Sqm all as specified and directed. | 10 | 325 | Sqm |
| 11 | 11 | Providing and fixing of 140 mm breath hand rail made up of Aluminium retainer with 2mm PVC corner on the retainer along with bracket of 50mm away from the wall for hand rail with all accessories and end cap ( 1no each elbow for 1 meter ). The width of rail will be 38mm and total finish product from the wall of 76mm approx 3 inch. Make PROLAD / IONA / VEILS/ GMR | 11 | 400 | Rmt |
| 12 | 12 | Providing and fixing of 150 mm breath anti collision Guard made up of Aluminium 1.6mm retainer with 2 mm PVC corner on the retainer on walls to avoid collision of objects to wall. Anti collision guard to be finished on the wall straight on the wall where it is required with the help of self tapping screw on the wall. panel with weight 0.625 kg/m and endcap is required at every corner where guard is finished. color as per the request of architect / consultant MAKE Prolad / IONA/ VEILS/ GMR | 12 | 400 | Rmt |
| 13 | 13 | Providing and fixing of 50mm *50mm, 3mts with 1.2mm thickness Aluminium retainer breath hand rail made up of Aluminium retainer with 2mm PVC corner on the retainer along with bracket and all corner is enlosed with End cap on two sides. Aluminium retainer is screwed with self tapping screw on the wall. PVC corner is slided over Aluminium profile retainer to get the final finish of the corner Guard, color of guard tobe finalized by consultant make Prolad / IONA/ VEILS/ GMR | 13 | 60 | Rmt |
| 14 | 14 | Providing & fixing Prolad/ Hunter Douglas/ Saint GobainVertical Linear Baffle Box Curtain Closed Cmade out of Aluminium Extrusion of 1.2mm thickness. The baffle blade shall be in size of 30 x 200 x 3600mm in powder coated finish of approved shade. The baffle blade shall be suspended using Slotted U-profile powder coated to black colour at an on-center spacing of 200mm. Installation The C-Channel/U profile shall be suspended at every 1200mm intervals on MS frame. The baffle blades shall be suspended from the C-channel/U-profile carrier bars at the required intervals (200mm) using baffle hangers. Spacing between blades shall be adjusted using the slots in carrier on facade, | 14 | 983 | Sqm |
| 15 | 15 | Supply and installation of Cladage 6mm thick EXTERIOR grade UV protected for ceiling F- Quality panels of standard size with both side décor. Cladage Interior panels are high-pressure laminates (HPL) as per EN 438-7, type EDF manufactured using patented Technology (NT), Panels are double hardened including acrylic polyurethane resin which is thermally cured under high pressure & High temperature. Termite free, water resistant.\nExplanation NT: Non fading high performance acrylic polyurethane surface Technology.\nInstallation of OREO Cladage panels will be done by high quality Rivets with recommended Aluminum ‘T’ section and ‘L’ section held by Aluminum Wall Bracket with Wind load and Dead load slot as per design, anchored by standard Hilti/Fischer or equivalent make anchor fasteners along with Thermal Separator .\nInstallation of Cladage Panels will be done using Rear Ventilated Principles only which is ensured by providing 200cm2/ per meter (for free flow of air behind the façade) for the façade and using the framework with no horizontal section. All specification has to be approved by Engineer -in-charge. | 15 | 1970 | Sqm |
| 16 | 16 | Providing and fixing of frame work with ST 50 48mm C Stud,{Material-IS277,120GSM galvanizing coating both sides inclusive} 0.5mm thick having unequal flanges of 34mm & 36mm, length 3660mm, placed at 406mm centre to centre in USG Boral ST50 50x0.50mm floor and ceiling channel {Material-IS277,120GSM galvanizing coating both sides inclusive} (0.50mm thick having equal flanges of 32mm made of Steel, length 3660mm), which is anchored to the floor & Soffit/true ceiling using anchor fastener Ø8x40mm Hilti make at 600mm c/c in zigzag manner.Floor channel on Top & Below to be wrapped with approved Moisture barrier film to Protect from corrosion resistance(Specifically in Green Concrete). USG Boral ST50 Nogging channel 0.5x48x40x492mm {Material-IS277,120GSM galvanizing coating both sides inclusive } has to be provided at every horizontal joint of the outer layer boards & fixed to the studs using Ø4x13mm USG Boral Metal to Metal screws.\nProviding and fixing 2 x12.5mm thick Plasterboard (conforming to IS 2095:2011, BMTPC certified)) screw fixed with 25mm and 38mm dry wall screws at 300mm at centre & 150mm at periphery to existing framework studs. Necessary cut-outs shall be provided for taking of supply and return air ducts/openings which shall be neatly finished after fixing of ducts thereby leaving no gaps. The layer should be finished so as to take on second skin in Gyp/Ply/MDF or Paint/wall paper directly.\nAs an acoustic requirement, contractor to affix 50mm thick rock wool of density 48kg/m3 with USG Boral Insulation holding strap for support rockwool with in C Stud cavity.\nThe horizontal & vertical joints of the Gypsum boards on both sides of the metal framework must be staggered so as to avoid through and through joints. \nAll joints to be taped & finished with 50mm wide Paper tape & All Purpose Jointing compound. (Confirming to ASTM C475).\n | 16 | 2000 | Sqm |
| 17 | 17 | S&F 10 mm thick toughened frosted glass door shutters of size area exc 1.50 Sqm but not exc 3 Sqm , including necessary floor spring hydraulically regulated , otherside fixed on pivot. CP fittings and fixtures , CP handles , CP locking arrangement , necessary cutting & holes moulding and fixed in complete as specified and directed by Engr in charge | 17 | 95 | Sqm |
| 18 | 18 | M & L for two coat anti bacterial paint over a coat of primer including 2 mm wall care putty of approved make as approved by Engr - in - charge complete all as specified and directed. | 18 | 3360 | sqm |
| 19 | 19 | M&L for 900 mm x 300 mm x 12 mm thick glazed exterior tiles fix with neat cement slury over 20mm thick screeding in cement mortar 1:4 and including 100 mm thick PCC 1:4:8 type D2 & pointing with epoxy mortar all as specified and directed. | 19 | 300 | Sqm |
| 20 | 20 | S&F Factory made UPVC white colour sliding windows area n. exc 2.00 sqm each. Three track made of extruded profiles with wall thickness of 2.3 mm (+/- 0.20 mm). Windows profiles with hollows section with multi chamber. Frame size (88 mmX 52 mm). Sliding sash (42 MM X 67 MM), sliding Mesh sash (42 mmX 57 mm), sliding interlock (one vertical length in each shutter)(45.5 mmX 28 mm).glazing bead (24.5 mmX 16 mm) will be mitered cut and fusion welded at all coeners, including drilling of holes for fixing of hardware and drainage of water etc, making arrangement for fixing of hardware, EPDM gasket, 1.2+/- 0.20 mm thick galvanised steel frame (30mm X 28 mm) 2 nos sliding sash ( 30mmX 18 mm), sliding mesh (26 mm X 10 mm),profile to be inserted in required orofile frame will be fixed to the wall with 8 mm X 100 mm long fastener hardware.(Touch lock of zinc alloyed (white powder coated ), steel roller system, Staineless steel wire 0.36 mm nominal dia of wire and averahe width of aperture 1.40 mm and required accessories) Note:- The unit rate qoatedby contractor excludes cost of glass and includes all another connected accessories ie, wire mesh and hard wares , complete all as specified and directed. | 20 | 277 | Sqm |
| 21 | 21 | Taking down chowkats or frames with shutters (without taking off shutters from frames) area exceeding 1.50 square metre and not exceeding 4.0 square metre each, including cutting holes for taking out hold fasts or dismantling brick work (holes cut and any other damage to jambs, walls for taking out hold fast shall be finished identical to existing finish without any extra cost to Govt.), all as specified and directed by Engineer-in Charge. | 21 | 88 | Nos |
| 22 | 22 | S&F 35mm thick pre-laminated designer factory made flush shutter of laminate or equivaqlent incl necessary hardware and fittings all as specified and directed | 22 | 10 | Sqm |
| 23 | 23 | M&L for factory made 100% solid wood plasticcomposite(WPC) Door frame of density 780/Cbm Make Rajshree or Eqv all as spd and directed. | 23 | 30 | Rm |
| 24 | 24 | Dismantling structure steel work incl door, gates, rolling/sliding shutters but excluding framed trusses etc all as specified and directed ny Engr in Charge. | 24 | 170 | Qtl |
| 25 | 25 | M&L for 25mm thick cement concrete 1:2:4 type B-0 using 12.5mm graded crushed stone aggregates as in floor and finished even and fair complete all as specified. | 25 | 3200 | Sqm |
| 26 | 26 | M&L for Vitrified Ceramic coloured tiles 10 mm thick (square/rectengular) polished, size of each tiles is 800x800mm as in floors, set and jointed in neat cement slurry and pointed in coloured cement to match the surface insluding 15 mm thick screed bed in CM 1:4 complete all as specified and directed. | 26 | 5400 | Sqm |
| 27 | 27 | M&L for glazed coloured ceramic tiles in dado/vertical surface (450mm x600mm x 7-8 mm) thick set and jointed in neat cement slurry and pointed in coloured cement to match the surface including 10 mm thick in cement mortar 1:3 even and fair for receving tiles on vertical surface and taking down cement plaster on brick walls complete all as specified and directed by Engr-in-Charge. | 27 | 3200 | Sqm |
| 28 | 28 | M&L for Non skid coloured ceramic tiles (square/rectengular) 7 to 8 mm thick area of each tile exceeding 0.11 sqm but n.exc 0.18 sqm, in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface,including 15 mm thick in cement mortar 1:4 complete all as specified and directed by Engr-in-Charge. | 28 | 200 | Sqm |
| 29 | 29 | M&L for glazed coloured ceramic tiles in dado/vertical surface (450mmx300mmx7mm) thick set and jointed in neat cement slurry and pointed in coloured cement to match the surface including 10 mm thick in cement mortar 1:3 even and fair for receving tiles on vertical surface complete all as specified and directed by Engr-in-Charge. | 29 | 400 | Sqm |
| 30 | 30 | M & L Fibre galss reinforced plastic (FRP) door frames shall be three lagged of cross section 90mm x 45 mm having single rebate of 32mm x 15mm to receive shutter of 30 mm thickness. The laminate door frame moulded with fire retardant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. MS stay shall be provided at the bottom to steady the frame all as specified and directed”.\n | 30 | 380 | RM |
| 31 | 31 | M & L FRP door shutter shall be 30mm thick glass fibre reinforced plastic (FRP) panelled door shutter of required colour and approved brand and manufactures. Made with fire retardant grade unsaturated polyester resin moulded to 3mm thick FRP laminate for forming hollow rails and styles with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings, cast monolithically with 5 mm thick FRP panels and confirming to IS 14856-2000”.\n\n | 31 | 95 | Sqm |
| 32 | 32 | S&F floor door stopper, aluminium alloy body and tongue anodised with hard drawn steel spring of 140mm size overall. | 32 | 6 | Each |
| 33 | 33 | S&F for 150mm size aluminium anodised barrel tower bolt of extruded section and fixed.all as specified and directed. | 33 | 120 | Each |
| 34 | 34 | S&F for 150mm size aluminium anodised handle of febricated type and fixed.all as specified and directed. | 34 | 120 | Each |
| 35 | 35 | Supply and fixing of stainless steel butt hinges medium weight 100 mm long fixed to frame as required complete all as specified. | 35 | 180 | Each |
| 36 | 36 | S&F aluminium alloy,anodised,sliding door bolt plate type 250 mm long and fixing clips of sheet ,cast or extruded section and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, complete all as specified . | 36 | 6 | Each |
| 37 | 37 | S&F 20 mm dia decorative drapary curtain road with bibs, braked & internal funnels. complete all as specified. | 37 | 211 | RM |
| 38 | 38 | M&L for 5.5mm thick plain sheet glass exc. 0.50 sqm each pane. all as specified and directed. | 38 | 220 | SQM |
| 39 | 39 | S&F Vitreous china wash down water closet pan (pedestal pattern), floor mounted with inbuilt P trap in white colour, including connection to trap and to flushing pipe including provn of cement concret beading complete all as specified and directed. | 39 | 35 | Each |
| 40 | 40 | S&F EWC Seat cover white colour of PVC complete all as specified and directed. | 40 | 35 | Each |
| 41 | 41 | S&F in repair 32/40 mm dia PVC waste pipe for WHB/sink complete all as specified | 41 | 58 | Each |
| 42 | 42 | supply only PVC low level flushing cistern 10 ltrs capacity incl PVC float valves, PVC connection and out let pipes complete. | 42 | 58 | Each |
| 43 | 43 | S&F Brass chromium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges aluminium anodized, fixed with rawl plugs. all as specified. | 43 | 58 | Each |
| 44 | 44 | S&F PVC connection 15mm size with PTMT nuts of lengh 450mm complete all as specified. | 44 | 174 | Each |
| 45 | 45 | S&F for 600mmx450mm mirror of selected quality glass, mounted on 6mm thick commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified. | 45 | 58 | Each |
| 46 | 46 | S&Fvitreous China wash basin, white, flat back size 550x400mm excluding tap, chain, plug but including brackets, waste fitting 32mm dia ,brass chromimium plated for glazed ware sink, basin,with long screwed shanks and fly nuts flange end bedded in red lead cement and other end fixed complete all as specified. | 46 | 58 | Each |
| 47 | 47 | S&F 15 mm CP mixer suitable for WHB for fixing hot & cold waterscrewed down for iron pipe and fixed all as specified and as directed. | 47 | 58 | Each |
| 48 | 48 | S&F vitreous china Squatting pan "Orissa pattern" size 580x440xmm white, with integral foot rest incl p trap and necessary connection to trap and flushing pipe etc complete all as specified and directed. | 48 | 23 | Each |
| 49 | 49 | S&F fancy type chromium plated stop valve cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions chromium plated of size 15 mm. all as specified | 49 | 40 | Each |
| 50 | 50 | -ditto as item ser no 6- but fancy type, chromium plated with long shank and cup (concealed type) | 50 | 25 | Each |
| 51 | 51 | S&F of Bib tap cast copper alloy with crutch or butter fly handle, screwed down, screwed for iron pipe of size 15mm bore chromium plated. all as specified | 51 | 58 | Each |
| 52 | 52 | S&F Ball Brass Valve high pressure with polythine coat and fly nut complete screwed for Iron pipe or brass ferrule and fixed of size 25mm bore. all as specified | 52 | 16 | Each |
| 53 | 54 | S&F rotational moulded polyethylene water storage tanks in three layer ( cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I of capacity 1000 liters including all accessories complete all as specified . | 53 | 8 | Each |
| 54 | 55 | S&F rotational moulded polyethylene water storage tanks in three layer ( cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I of capacity 5000 liters including all accessories complete all as specified . | 54 | 8 | Each |
| 55 | 56 | M&L Gun metal globe of gate valve with iron wheel head, screwed both ends of size 15mm | 55 | 16 | Each |
| 56 | 57 | M&L Gun metal globe of gate valve with iron wheel head, screwed both ends of size 20mm | 56 | 16 | Each |
| 57 | 58 | S&F 2 in 1 Angle Valve 15 mm CP fancy pattern type cast copper alloy screwed for iron pipe or for brass ferrule and fixed all as specified and as directed. | 57 | 58 | Each |
| 58 | 59 | S&F Angle Valve 15 mm CP fancy type cast copper alloy screwed for iron pipe or forbrass ferrule and fixed all as specified | 58 | 116 | Each |
| 59 | 60 | S&F CP hand spray (health facucet with 1.5 M long easy flex tube in chrome finish and wall hook) complete all as specified and directed. | 59 | 15 | Each |
| 60 | 61 | S&F chromium plated jet for WC with 1.00 M long pipe including necessary fittings complete all as specified and directed. | 60 | 20 | Each |
| 61 | 62 | S&F Vitreous China half stall urinals, (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. incl of fixing supply pipe to flushing cistern, trap and waste pipe) | 61 | 20 | Each |
| 62 | 63 | S&F Urinal Spreader of CP White colour fixing to 15 mm bore pipe. | 62 | 20 | Each |
| 63 | 64 | M&L 15mm bore galvanised steel water tubing medium grade (ISI Marked) with all fittings and fixed complete to walls and or laid under floors etc complete all as specified. | 63 | 400 | RM |
| 64 | 65 | M&L 20 mm bore galvanised steel water tubing medium grade (ISI Marked) with all fittings and fixed complete to walls and or laid under floors etc complete all as specified. | 64 | 250 | RM |
| 65 | 66 | Excavation in trenches not exc 1.5m wide and not exc. 1.5m depth in any type of soil for foundation etc or for shafts, well drain pipes getting out in any type of soil complete all as specified. | 65 | 80 | Cum |
| 66 | 67 | Returning fillling in including spreading, levelling watering and well ramming in layers not exc 25cm thick in each layer complete all as specified. | 66 | 29 | Cum |
| 67 | 68 | Removing excavated soil to a distance n exc 50m and depositing at alevel n exc 1.5m above the starting point. all as specified. | 67 | 51 | Cum |
| 68 | 69 | M&L brick work with sub class B bricks straight or curved on plan to any radius built in CM 1:6 all as specified. | 68 | 124 | Cum |
| 69 | 70 | M&L for PCC type D-2 ,1:4:8 ,using 40mm graded crushed stone aggregate as in sub base , mass concrete all as spfd. . | 69 | 32 | Cum |
| 70 | 71 | M/Lfor 40 mm thick PCC 1:2:4, type B1 using 20mm graded stone agg as in floor all as specified and directed.. | 70 | 210 | sqm |
| 71 | 72 | M&L half brick work with sub class B bricks straight or curved on plan to any radius built in CM 1:4 all as specified and directed. | 71 | 60 | Sqm |
| 72 | 73 | M&L for Rendering 15 mm thick on brick work or concrete surfaces in cement mortar 1:4 finished even and smooth including mixing integral water proofing compound in the proportion as mentioned in manufacturer's instructions complete all as specified. (Water proofing compound to be measured and paid for separately). | 72 | 600 | Sqm |
| 73 | 74 | M&L for Rendering 10mm thick on brick work or concrete surface in cement mortar 1:6 finished even and smooth without using extra cement all as specified. | 73 | 330 | Sqm |
| 74 | 75 | Supply only liquid water proofing compound complete all as specified. | 74 | 15 | Ltr |
| 75 | 76 | M&L for preparation of New steel and iron surfaces exceeding 10 cms width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer. all as specified. | 75 | 2200 | Sqm |
| 76 | 77 | M&L for preparation of Old steel and iron surfaces exceeding 10 cms width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer after copmlete removal and preparation of old existing surface complete all as specified. | 76 | 250 | Sqm |
| 77 | 78 | M&L Preparing newly plastered surfaces or unplastered of walll and applying two coats of weather proof exterior emulsion paint on any surface as approved and directed by Engr-in-charge. | 77 | 600 | Sqm |
| 78 | 79 | M&L two coats of oil bound distemper on walls including preparation on new surfaces over coat of primer incl applying 3 mm thick layer of wall putty on walls to give uniform surface complete all as specified and directed. | 78 | 100 | Sqm |
| 79 | 80 | S&F cast iron soil, waste and vent pipes (sand cast) 100mm bore in any length with or without ears with cement joints laid in trenches all as specified. | 79 | 115 | RM |
| 80 | 81 | S&F cast iron soil, waste and vent pipes (sand cast) 75mm bore in any length with or without ears with cement joints laid in trenches all as specified. | 80 | 90 | RM |
| 81 | 82 | S&F cast iron soil, waste and vent pipes (sand cast) 100mm bore in any length with or without ears with cement joints fixed to walls duly apply a coat of bitumenous black paint complete all as specified and directed. | 81 | 118 | RM |
| 82 | 83 | All as per srl item No above but 75mm bore pipes fixed to wall ditto. | 82 | 50 | RM |
| 83 | 84 | S&F Salt glazed stone ware gully traps square or round mouthed, type P of size 150x150mm set and jointed to drain pipe with cement mortar (1:1) all as specified. | 83 | 50 | Each |
| 84 | 85 | S&F Cast iron bend (any radius) diminishing pieces or tapers 100mm bore fitted with oval access door. all as specified. | 84 | 28 | Each |
| 85 | 86 | S&F Cast iron bend (any radius) diminishing pieces or tapers 75mm bore fitted with oval access door. | 85 | 28 | Each |
| 86 | 87 | S&F Stack clamps made out of 50mm by 5mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof for 100/110mm bore pipe.complete all as specified and directed. | 86 | 200 | Each |
| 87 | 88 | S&F Stack clamps made out of 50mm by 5mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof for 75 mm bore complete all as specified. | 87 | 120 | Each |
| 88 | 89 | S&F Cast iron branch pieces single (equal unequal ordinary or inverted (Spigot or socketed type) or with parelled branches 75mm bore (fixed in repairs) | 88 | 20 | Each |
| 89 | 90 | S&F Cast iron branch pieces single (equal unequal ordinary or inverted (Spigot or socketed type) or with parelled branches 100mm bore all as specified. | 89 | 20 | Each |
| 90 | 91 | PVC (SWR) pipes 110mm bore single socketed , in any length with rubber ring joints fixed to wall | 90 | 650 | RM |
| 91 | 92 | S&F cast iron vent cowl for 75mm dia pipe complete all as specified. | 91 | 10 | Each |
| 92 | 93 | S&F cast iron floor trap 75 mm, with grating including jointing to waste pipe . all as specified. | 92 | 30 | Each |
| 93 | 94 | S&F PVC(SWR) bends plain 110 mm bore complete all as specifed and directed. | 93 | 32 | EACH |
| 94 | 95 | S&F cast iron floor trap 75 mm, with grating including jointing to waste pipe . all as specified. | 94 | 48 | Each |
| 95 | 96 | M&L for providing PMM (Polymer modified cementitious mortar) :-\n(i) Dry sub strate surface and free of debris & dust\n(ii) Applying Epoxy bond coat on the sound substrate using approved spray machine & ensuring that no pin holes are visible.(In case pin holes are still visible after a coat, a second coat shall be applied to ensure absence of pin holes).\n(iii) Immediately after application of epoxy bond coat as above apply PMM (Polymer modified cementitious mortar) of 25 mm thickness.\nNote : Application of PMM shall be preferably be in coats of appx 10mm thickness. PMM work shall be executed in fairely rapid successions so as entire work is completed with in 30 mins). PMM shall be pre packed ready to use.\n(iv) PMM surface to be moist cured for three days followed by air curing in temperature as recommended by manufactuer complete all as specified and directed.\n | 95 | 500 | Sqm |
| 96 | 97 | M&L for Providing & Pouring Micro concreting M-40 grade :-\n(i) Dry concrete substrate surface and free of debris & dust\n(ii) Applying Epoxy bond coat on the sound concrete substrate using approved spray machine & ensuring that no pin holes are visible. (In case pin holes are still visible after a coat, a second coat shall be applied to ensure absence of pin holes).\n(iii) Immediately after application of epoxy bond coat as above pour Micro concreting M40 grade, Make : MasterEmaco S46T of BASF or equivalent FOSROC/SIKA using approved mixing machines/pumping under pressure via approved pneumatic pump at the locations to be repaired in RCC beams & columns etc,. Adding of aggregates will be permitted only as per manufacturer’s recommendation without compromising the strength. The rate shall include cost of all materials (except re-bar) labour charges for mixing, pouring concrete, cost of tools, lead & lift of materials, transportation etc., to carry out the complete work complete all as specified and directed.\n\nNote : The cost of micro concrete M-40 grade & Epoxy bond coat is inclueded in this item. | 96 | 16 | Cum |
| 97 | 98 | Providing and injecting chemical emulsion for post constructional Antitermite treatment treatment along external wall where the apron is not provided using chemical emulsion at the rate of 7.5 liters per sqm of the vertical surface of sub-structure to a depth of 300 mm including excavating channel along the wall and rodding etc. complete all as specified. | 97 | 190 | RM |
| 98 | 99 | Treatment of soil under exiting floors using emulsion @ one liter per hole, 300 mm apart including drilling and plugging 12 mm dia holes with cement mortar 1:2 (1 Cement: 2 coarse sand) to match the existing floors. | 98 | 5400 | Sqm |
| 99 | 100 | M&L Providing and fixing Glazed Fire Door of size 2100 mm X 2100 mm with the following specification :\n(a) Hollow metal fire rated Glass Fixed Partition as per BS 476 -Part 22 & IS 3614 part-1 & part-2 for stability and integrity. Pressed Galvanized steel confirming to IS 277 with specifications as stated below. Recommended fire doors shall have door tested at SIRIM for maximum rating of two hours with Fire Glass vision panel. Test certificates should be available for vision lites /panels as part of the fire door assembly. The doors supplied should be within the tested specimen, deviation in specification and sheet thickness other than what is mentioned in the test certificates is not allowed. Proper label confirming the type of door and the hourly rating is mandatory for every door assembly.\n(b) Door frame shall be Single rebate frame profile of size 100 x 58 mm made out of 1.6mm minimum thick Stainless Steel sheet (Grade SS-304). Frames shall be Mitered / Butt Joint and field assembled with self tabs. All provision should be mortised, drilled and tapped for receiving appropriate hardware. Frames should be provided with back plate bracket and anchor fasteners for installation on a finished plastered masonry wall opening. Once frame is installed, should be grouted with cement & sand slurry as necessary for fire doors.\n(c) Door leaf shall be 47 mm thick fully flush double skin door with vision lite. Door leaf shall be manufactured from 1.2mm thick Stainless Steel sheet (Grade SS-304). The internal construction of the door shall have reinforcements for receiving appropriate hardware. The infill material shall be resin bonded honeycomb core. All doors shall be factory prepped for receiving appropriate hardware. The edges should be interlocked with lock seam. For pair of doors astragals will be provided as required. 200x300m Vision lite wherever applicable should be provided as per manufacturers recommendation with a beeding and screws from inside. The glass should be 10 MM thick fire rated glass of Schott Make with relavant rating of the door. \n | 99 | 10 | Each Job |
| 100 | 101 | M&L for 16-18 mm thick black granite stone work (table rubbed and polished) laid over and including 20 mm thick screed bed or bedding layer in CM 1:4 as in steps, Jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, front and side of slab moulded and polished complete all as specified and directed by Engr-in-Charge. Granite stone slab shall be laid in single piece with rounding of edges and a grove shall be provided beneath the projection portions of stone slab and provn of hole for gas pipe shall be provided.” | 100 | 110 | Sqm |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
