Military Engineer Services-MES has published Provision Of Runway Controller Huts And Certain Other Connected Works At Jammu. Submission Date for this Tender is 15-02-2021. Civil Work Tenders in GE (P) AF JAMMU Jammu And Kashmir. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 07-Jan-2021 | Amendment to Critical Date | Date | 27-01-2021 |
| 2 | 20-Jan-2021 | Corrigendum to BOQ and Certain other Misc Amendments | BOQ | 01-02-2021 |
| 3 | 01-Feb-2021 | Certain Amendments to BOQ alongwith amendment to Critical Dates | Date | 08-02-2021 |
| 4 | 08-Feb-2021 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 15-02-2021 |
| Name of Work : PROVN OF RUNWAY CONTROLLER HUTS AND CERTAIN OTHER CONNECTED WORKS AT JAMMU. | |||||
|---|---|---|---|---|---|
| Sl. No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Construction of Block of Runway Controller Hut building, Single Storey, permanent specification complete all as specified and shown on drawings. | 2 | Each Block | |
| 2 | 2 | Surface dressing not exceeding 15cm deep including clearing away all grass vegetation, saplings, shrubs, brushwood, undergrowth, roots, and trees not exceeding 15cm girth and height not exceeding 1.5 metres and removing rubbish to a distance exceeding 250metres but not exceeding 500metres, complete all as specified and directed. | 31.2 | Square Metre | |
| 3 | 3 | Excavating over areas not exceeding 1.5m deep and getting out in any type of soil, complete all as specified and directed. | 47 | Cubic Metre | |
| 4 | 4 | Excavating over areas exceeding 1.5m but not exceeding 3.0m deep and getting out in any type of soil, complete all as specified and directed. | 41 | Cubic Metre | |
| 5 | 5 | Excavating in trenches, not exceeding 1.5metre wide and not exceeding 1.5metre depth for foundation, etc., and getting out in any type of soil, complete all as specified and directed. | 1444.5 | Cubic Metre | |
| 6 | 6 | Returning, filling in, including spreading, leveling, watering and well ramming in layers not exceeding 25 cm thick any type of soil, complete all as specified and directed. | 950 | Cubic Metre | |
| 7 | 7 | Removing excavated soils to a distance exceeding 50m but not exceeding 100m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed. | 541.5 | Cubic Metre | |
| 8 | 8 | Hard core of broken stone gauge exceeding 63mm and not exceeding 100mm deposited, spread and levelled in layers not exceeding 15cm thick, watered and rammed to a true surfaces, complete, all as specified and as directed. | 1.4 | Cubic Metre | |
| 9 | 9 | Plain Cement concrete type D-2, 1:4:8 (using 40mm graded crushed stone aggregate) as in foundation filling and mass concrete, complete all as specified and directed. | 0.41 | Cubic Metre | |
| 10 | 10 | Plain Cement concrete type C-2, 1:3:6 (using 40mm graded crushed stone aggregate) as in foundation filling and mass concrete, complete all as specified and directed. | 5 | Cubic Metre | |
| 11 | 11 | Plain Cement concrete type B-2, 1:2:4 (using 40mm graded crushed stone aggregate) as in foundation filling and mass concrete, complete all as specified and directed. | 0.4 | Cubic Metre | |
| 12 | 12 | Brick work with sub class ‘B’ bricks, straight or curved on plan exceeding 6m mean radius built in in CM 1:6, complete all as specified and directed. | 1.52 | Cubic Metre | |
| 13 | 13 | Plain cement concrete 1:2:4 type B-1 (using 20 mm graded stone aggregate) as in cills, lintels up to 1.5 metre clear span, steps, seismic and other similar band, plinth course, string courses, lacing courses, parapets and railing up to 60cm in height, copings, kneelers, apex stone, bed plates, kerbs etc and in similar works including weathering, slightly rounded or chamfered angles and throating and necessary form work complete, all as specified and as directed. | 0.18 | Cubic Metre | |
| 14 | 14 | Precast reinforced cement concrete 1:2:4 type B1 (using 20mm graded stone aggregate) as in cover slab for manholes set in cement mortar 1:4 complete all a specified and as directed. | 0.2 | Cubic Metre | |
| 15 | 15 | RCC M-25, design mix, using 20mm graded crushed stone aggregate as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete, complete all as specified and as directed. | 5 | Cubic Metre | |
| 16 | 16 | RCC M-25, design mix using 20mm graded crushed stone aggregate as in walls, retaining walls, basement walls, ballast walls and the like; any thickness; above top of footings; including attached pilasters and buttresses all as specified and directed. | 8 | Cubic Metre | |
| 17 | 17 | Formwork to sides of concrete foundation, footings, bases of columns, rafts and raft beams and similar work; vertical or to batter for rough finished surfaces of concrete, complete all as specified and as directed. | 4 | Square Metre | |
| 18 | 18 | Formwork to faces of walls, retaining walls, abutments, parapets and staircase railings and similar work including attached pillasters, buttresses, etc.; vertical or to batter complete all as specified and directed. | 92 | Square Metre | |
| 19 | 19 | TMT bars 10mm dia and over, cut to length bent to shape including binding with MS annealed wire of dia not less than 0.90 mm, complete, all as specified and as directed. | 100 | Kilogram | |
| 20 | 20 | TMT bars 6 to 8mm dia as in stirrups, cut to length bent to shape including binding with MS annealed wire of dia not less than 0.90 mm, complete all as specified and as directed. | 594 | Kilogram | |
| 21 | 21 | Mild Steel framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290. Gde-E-165 complete all as specified and directed.\n | 315 | Kilogram | |
| 22 | 22 | Welded steel wire fabric not exceeding 4.0 Kg/Sqm and fixed/welded to steel members complete all as specified and directed. | 79 | Kilogram | |
| 23 | 23 | Rendering 15mm thick in cement mortar 1:4 on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement, complete all as specified. | 59.65 | Square Metre | |
| 24 | 24 | Supply only liquid water proofing compound all as specified and as directed. | 16 | Liter | |
| 25 | 25 | 75mm thick PCC type C-2, 1:3:6, nominal mix, using 40mm graded crushed stone aggregate as in plinth protection, sub base, path, hard standing etc, surface finished even and smooth without using extra cement, complete all as specified and as directed. | 28 | Square Metre | |
| 26 | 26 | Drilling of holes in any strata by mechanical percussion method below ground level including electrical logging through any kind of strata soils / rocks, disposal of surplus soil within a distance of 100m, keeping space for pea gravel packing in and including lowering and extraction of casing pipes of suitable thickness as per IS:4270:2001 after lowering of designed assemble of EWR pipe of following diameters complete all as specified and as directed: | 90 | Running Metre | |
| 27 | 26.01 | Notes :- \n1. Two Nos Borewells of approxinate depth 45metres each are to be executed.\n2. Casing pipe shall be arranged by the contractor and the same shall remain property of the contractor after extraction.\n3. In case of non-extraction of casing pipe due to failure of bore well, the contractor will have no claim what-so-ever on this account.\n\n | |||
| 28 | 27 | Supplying, assembling and lowering 125 mm nominal bore Mild Steel ERW ISI marked casing blind pipe having wall thickness 7.1 mm as per IS-4270-2001 and jointing with electric arc welding in random length of 3 to 6 metre, jointing and painting with two coats of bituminous paint on external surfaces of pipe upto maximum depth of 45 RM below ground level complete all as specified and directed.\nNote : Three piecs of 300mm long flats of size 40 x 5mm shall be welded on each joint. The Contractor's Quoted Rate shall be deemed to be inclusive of this provision. | 74 | Running Metre | |
| 29 | 28 | Supply, lowering and fixing Mild Steel ERW slotted casing pipe 125mm bore having thickness 7.1 mm as per IS-8110:1985 and slot size 2" x 1/16" area of slot shall be between 15 to 22% of screened area including welding of sockets all as specified and directed. | 16 | Running Metre | |
| 30 | 29 | Supply and lowering in Borewel MS ERW Column Pipe 32 mm bore in 3.0 mtr length both end flanged with MS flanges 10mm thick with cut for passing the submersible cable and four no of holes 10mm dia with sutable size of nuts, bolts, washers and rubber gasket complete all as specified and directed. \nNote : All arrangement and T&P required for lowering the column pipe in the bore shall be made by the contractor under their own arrangement at no extra cost. | 70 | Running Metre | |
| 31 | 30 | Well cap (one for each bore well ) fabricated out of 6.0 mm thick MS sheet for 125 mm dia bore pipe in two piece having 80 mm dia hole in centre with external bracket of flat iron of size 100 mm x 6 mm thick complete with nuts and bolts and washers etc including painting with two coats of black bitumenious paint complete all as specified and directed. | 2 | Each | |
| 32 | 31 | Housing clamp for 125 mm dia MS ERW pipe made out of flat iron 100 x 12 mm thick with required bots, nuts washers including painting with two coats of black bitumenous paint complete all as specified and directed. | 2 | Each | |
| 33 | 32 | Mild Steel Shoe suitabe for 200 mm dia as per requirement of odex attachment all as specified and directed. | 2 | Each | |
| 34 | 33 | Development of Borewell, minimum 16 hours for each Borewell as per IS-2800 by means of compressor of minimum 250 PSI capacity air compressor until the sand free water is obtained from the well for an uninterrupted period of 16 hours in a cycle of 24 hours. The final discharge shall be free from sand to deliver minimum 3 PLS of water and carrying out necessary yield test by V-notch method and submitting the test report complete all as specified and directed. | 32 | Per \nHour | |
| 35 | 34 | Supply, lowering connecting and commissioning of Submersible Pumpset Radial Flow multistages min 14 stages complete with electric motor suitable for 3 phase, 415 volt 50 Hz AC, 5 HP, 5 star rated suitable to be lowered in 125 mm dia bore well and having discharge capacity not less than 110 LPM at 60 m head complete stainless steel body and impeller all as specified and directed. | 2 | Each | |
| 36 | 35 | Supply, installation, testing and commissioning of wall mounted single phase 230 volts, 50 HZ AC electric unmanned / manned type fully automatic system / Panel for automation cum-fault analysis-cum-protection and control, suitable for operating all types of single phase motors/pumps sets 2 HP rating for each bore well. The complete system should be encased in a wall mounted enclosure/panel box of appropriate size and dimesions and should be finished with powder coated painting complete with the following specification :- | 2 | Each | |
| 37 | 35.01 | (a) Low voltage protection below 190 Volt.\n(b) High voltage protection above 250 Volt. \n(c) Pick up voltage- 190 volt. (d) Overloading.\n(j) Relay contact rating 5Amps resistive at 230 Volt . \n(k) Coil burnt LED indication. | |||
| 38 | 36 | Flat Submersible electric Cable 4.00 Sqmm 3 core with stranded copper conductor cable two runs of 35 RM for each borewell including water proof joints with motor leads connected to panel board all as specified and directed. | 70 | Running Metre | |
| 39 | 37 | Strata Sample Box made out of 20 mm thick veneered particle board and 12 mm thick ply wood with 25 mm x 25 mm aluminium angle 2 mm thick bearer, overall length 1200 mm x 750 mm x 100 mm with front glass sheet sliding type cover with aluminium frame all around 2 Nos key holes plate of size 40 mm x 25 mm and 3 mm thick complete showing name of tube well, location and strata sample with depth complete all as per specified. | 2 | Each | |
| 40 | 38 | Chemical / Bacteriological analysis and Potablity Test of water obtained from borewell from approved lab and submitting the report in triplicate complete all as per directed. | 2 | Each | |
| 41 | 39 | Taking up cast iron water mains 100mm dia (including fittings) with spigot and socket ends and lead joints including burning out joints and recovering lead complete all as specified and as directed. | 198 | Running Metre | |
| 42 | 40 | Rotational moulded polyethylene water storage tanks triple layer (cylindrical vertical with closed top) hoisted and fixed in position, including over flow and drain out pipe complete of 500 litre capacity complete all as specified and directed. | 2 | Each | |
| 43 | 41 | Cutting existing steel tubing for alteration or additions done in position without taking down complete all as specified and directed. | 6 | Each Job | |
| 44 | 42 | Screwing existing steel tubing for alterations or additions (or lengthening screw on pipe to form connector) 40 or 50 mm GI tubing complete all as specified and directed. | 3 | Each Job | |
| 45 | 43 | Supply and laying in trenches / on floor, jointing and testing Ductile Iron pipe with spigot and socket ends including specials, class K-9, conforming to IS-8329 complete all as specified and as directed. | 170 | Running Metre | |
| 46 | 44 | Steel water tubing medium grade galvanised with all fittings laid in trenches / on ground of nominal bore dia 100mm, complete all as specified and as directed. | 350 | Running Metre | |
| 47 | 45 | Steel water tubing medium grade galvanised with all fittings laid in trenches / on ground of nominal bore dia 80mm, complete all as specified and as directed. | 100 | Running Metre | |
| 48 | 46 | Steel water tubing medium grade galvanised with all fittings laid in trenches / on ground of nominal bore dia 50mm, complete all as specified and as directed. | 1100 | Running Metre | |
| 49 | 47 | Steel water tubing medium grade galvanised with all fittings laid in trenches / on ground of nominal bore dia 25mm, complete all as specified and as directed. | 100 | Running Metre | |
| 50 | 48 | Steel water tubing medium grade galvanised with all fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor complete with all fittings (such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc.) of nominal bore dia 20mm, complete all as specified and as directed. | 220 | Running Metre | |
| 51 | 49 | Steel water tubing medium grade galvanised with all fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor complete with all fittings (such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc.) of nominal bore dia 15mm, complete all as specified and as directed. | 20 | Running Metre | |
| 52 | 50 | M&L for Mechanical type joint made of MS sheet of size 6/8 mm thick along with rubber gasket nuts, bolts and washers suitable for 100mm bore dia of GI/ CI /DI pipe, complete all as specified and directed. | 6 | Each | |
| 53 | 51 | M&L for Mechanical type joint made of MS sheet of size 6/8 mm thick along with rubber gasket nuts, bolts and washers suitable for 80mm bore dia of GI/ CI /DI pipe, complete all as specified and directed. | 6 | Each | |
| 54 | 52 | Mild Steel fittings such as collar, bends (any type / radius / angle, double end socketted or double flanged or spigot & socket, tail pieces (all socketed or all flanged with an equal & other end tapering bellmouth or flanged plates, connecting pieces straight (both end flanged or socketed of socket & flanged & spigot ends or bellmouth tailpieces (one end flanged & other end spigot or socket or tatering as bell mouth or flanged) caps blank flanges heavy duty suitable for mechanical joint / flanged joint with and incl taking down old fitting of any type and any size all as specified & directed.\nNote : Certifiacte for Weight of fittings by the manufacturer shall be submitted by the Contractor before claiming payment. | 6 | Each | |
| 55 | 53 | Gun-metal, globe or gate valves with iron wheel head, screwed both ends for iron pipe and fixed for 50mm dia of bore, complete all as specified and directed. | 3 | Each | |
| 56 | 54 | Gun-metal, globe or gate valves with iron wheel head, screwed both ends for iron pipe and fixed for 32mm dia of bore, complete all as specified and directed. | 2 | Each | |
| 57 | 55 | Gun-metal, globe or gate valves with iron wheel head, screwed both ends for iron pipe and fixed for 20mm dia of bore, complete all as specified and directed. | 2 | Each | |
| 58 | 56 | Cast iron Non Return Valve ISI marked 32 mm dia heavy duty both end flanged complete with suitable size of nuts, bolts, washers and rubber packing gasket etc. all as specified and directed. | 2 | Each | |
| 59 | 57 | Bib tap cast copper alloy CP, with capstan Head handle, screwed down, screwed for 15mm bore iron pipe or for brass ferrule, complete all as specified and directed. | 4 | Each | |
| 60 | 58 | Stop valve cast copper alloy, with crutch or butterfly handle, screwed down, high pressure screwed both ends for 15mm bore iron pipe or for unions, complete all as specified and directed. | 4 | Each | |
| 61 | 59 | Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe of 15mm bore, complete all as specified and as directed. | 2 | Each | |
| 62 | 60 | PVC connection 600mm long fitted with PTMT nut and washer on both ends, fixed to 15mm bore iron pipes, complete all as specified and directed. | 2 | Each | |
| 63 | 61 | PCC 1:3:6 type C-2 (using 40mm graded crushed stone aggregate) as in surface channel and drains and similar work complete all as specified and directed. | 0.16 | Cubic Metre | |
| 64 | 62 | Extra for forming fair finished drain or channel 30cm inner girth in cement concrete, using extra cement including forms, moulds, mitred stopped ends complete all as specified and directed. | 1.6 | Running Metre | |
| 65 | 63 | Reinforced concrete pipes, class NP-3, laid and jointed complete with collars complete all as specified and directed. | 42 | Running Metre | |
| 66 | 64 | Concrete bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested, for 150mm bore of pipe plain cement concrete 1:4:8 type D-2 (Using 40mm graded stone aggregates) complete all as specified and directed. | 40 | Running Metre | |
| 67 | 65 | Construction of Brick Masonry Valve Pit, internal size 900mm x 900mm x 1200mm (from top of PCC to bottom of cover) including excavation in any type of soil, returning, filling in around foundation, removal of surplus soil to a distance n.exc 50m, PCC 1:4:8 type D-2 in foundation, brick work in cement mortar 1:6, 12mm thick plaster in cement mortar 1:4 to internal surfaces and flush pointed externally as the work proceeds in the same mortar PCC coping 1:2:4 type B-0 using 12.5mm graded stone aggregate, pit cover of MS sheet 3.15mm thick with locking arrangement handle, fixing arrangement and painting with synthetic enamel paint two coat of red oxide primer, complete all as specified and directed. | 3 | Each | |
| 68 | 66 | Septic tank for 50 users, Brick construction with top of slab at ground level including necessary excavation and earth work in any type of soil and disposal of surplus soil to a distance not exceeding 50 metres, vent pipe, supplying and fixing RCC precast manhole cover having 6mm plate embedded all around / fibre reinforced cover with angle iron frame vent shaft and sludge chamber etc., all as specified and shown in Drawing No CE/TD-1202/03 Sheet 1/2 & 2/2. \n | 2 | Each | |
| 69 | 67 | Soakage Well of size 3.0 Mtr dia x 3.0 Mtr deep including excavation, in any type of soil, foundation in PCC 1:3:6, walls of honey combed masonry with top ring of M-25 concrete including intercepting chamber and screen chamber made of brick masonry in CM, RCC cover slab in M-25 / SRFC cover, interconnecting pipes of RCC/DWC filled with brick bats effective depth complete all as specified and shown on Drawing No CE/TD-1202/03 Sheet 1/2 & 2/2. \nNote for Serial Item No 65 to 67 : \n1. During excavation if unexpected water is encountered, the same shall be bailed out / de-watered by the contractor mechanically or manually without any extra cost. \n2. The excavated surplus soil shall be removed to a distance not exceeding 500mtr and deposited where directed. | 2 | Each | |
| 70 | 68 | Preparation new plastered or previously untreated surfaces of walls and applying three coats of white wash, complete all as specified and directed. | 49 | Square Metre | |
| 71 | 69 | Preparation of new steel surfaces of any description, over 10cm width or girth and applying two coats of synthetic enamel paint, over a coat of red oxide primer, complete all as specified and as directed. | 16.5 | Square Metre | |
| 72 | 70 | Point wiring with 1.5 Sqmm PVC FRLS insulated unsheathed copper conductor single core cable multistrand flexible cable and 1.5 Sqmm PVC FRLS insulated unsheathed copper conductor single core cable (green colour) as earth lead in and including surface / concealed as required non rigid PVC conduit medium grade with all fittings (ISI marked) controlled by one switch including CI / MS sunk box of required size including plastic laminated sheet as required and other accessories as required including cutting chases to wall for one light point / fan point / bell point controlled by one switch complete all as specified and directed. | 18 | Point | |
| 73 | 71 | All as per the description of Serial Item No 70 here-in-before but for one 3 pin socket outlet 5 Amp independent, complete all as specified and as directed. | 20 | Point | |
| 74 | 72 | All as per the description of Serial Item No 70 here-in-before but for one 3 pin socket outlet 5 Amp on same board, complete all as specified and as directed. | 12 | Point | |
| 75 | 73 | All as per the description of Serial Item No 70 here-in-before but for one 3 pin socket outlet 15 Amp independent board using cable of size 4.0 Sqmm with 2.5 Sqmm copper conductor in green colour for as earth continuity conductor all as specified and directed. | 4 | Point | |
| 76 | 74 | Switch piano, flush type, 5 Amps, single pole, one way, complete all as specified and as directed. | 50 | Each | |
| 77 | 75 | Switch piano, flush type, 15 Amps, single pole, one way, complete all as specified and as directed. | 4 | Each | |
| 78 | 76 | Socket out let, 2 in 1, 2 and 3 pin 5 Amp, piano flush type, 240 volts, complete all as specified and as directed. | 32 | Each | |
| 79 | 77 | Socket outlet combination universal type, 2 in 1, 3 pin 5 and 15 Amp, piano flush type, 240 volts, complete all as specified and as directed. | 4 | Each | |
| 80 | 78 | Ceiling rose surface bakelite three terminals 240 volts complete all as specified and as directed. | 4 | Each | |
| 81 | 79 | Lamp holder PVC case body of Bakelite with back plate suitable for batten fittings complete all as specified and as directed. | 2 | Each | |
| 82 | 80 | LED Lamp retrofit type 1 x 09 Watts having PF not less than 0.9 all as specified and directed | 6 | Each | |
| 83 | 81 | Tube light fitting box type suitable for and including LED 18 Watts tube Rod 4' long with decorative colour in polycarbonate housing and all accessories pre-wired and making connections with three core copper flexible cable of size 23/0.0076 from ceiling rose to PVC connector to light fitting complete all as specified and as directed. | 4 | Each | |
| 84 | 82 | LED recess luminaire, with high brightness SMD LEDs as light source, suitable for Armstrong / Grid ceiling, 2' x 2' size, 34 / 36 Watts including making connection from ceiling rose to fitting with PVC insulated sheathed flexible copper conductor cable of size 0.75 Sqmm complete all as specified and as directed. | 4 | Each | |
| 85 | 83 | Bulk head luminaries complete with all accessories suitable for and including 1 x 10 Watts LED lamp including connecting up with twin core twisted flexible copper conductor cable with suitable size of 230 Volts 50 Hz complete all as specified and as directed. | 4 | Each | |
| 86 | 84 | Ceiling Fan, Five Star Rated for energy saving (as per BEE recommendation) 1200mm sweep single phase 230 volts 50 Hz AC supply totally enclosed heavy duty motor with die cast aluminum rotor complete with down rod, Regulator including hanging of fan, connecting electrically using 3 core 0.75sq mm PVC insulated flexible copper conductor cable over all sheathed all as required at site or directed. \n | 2 | Each | |
| 87 | 85 | Exhaust fan, Five Star Rated for energy saving (as per BEE recommendation) AC, SP 230/240V, 300mm sweep with louver, 1400 RPM complete with accessories complete provisioning of three core flexible copper cord of size 23/0.0076 of required length from connector to fan for connection, complete all as specified and as directed.\n | 2 | Each | |
| 88 | 86 | Distribution Board iron clad, double door with IP-43 IK-09 protection suitable for MCB TPN as incomer and MCB SP as outgoing, 415 Volts Three Phase 50 C/S 12 way, complete with appropriate size copper bus bar and neutral link complete with one MCB TPN, 415 Volts 63 Amps rating with rupturing cap 10 KA of the same make as of distribution board & including cutting chases to wall for fixing DB and making good the disturbed wall surface all as required at site or directed. | 2 | Each | |
| 89 | 87 | Busbar chambers 300mm long iron clad with 4 Nos 200 Amp rated copper strips complete fixed flush wall and making good the disturbed wall surfaces all as a required at site or directed. | 2 | Each | |
| 90 | 88 | MCB SPN, 6 to 30 Amp, 240 volt, complete all as specified and as directed. | 4 | Each | |
| 91 | 89 | MCB SP, 6 to 32 Amp 10 KA, complete all as specified and as directed. | 16 | Each | |
| 92 | 90 | Single pointed air termination aluminum rod 12 mm dia, 300 mm long to walls/roofs/pipes with suitable clamp of MS with bolts and nuts etc required at site and complete all as specified and directed.\nNote : MS work will be measured and paid separately. | 6 | Each | |
| 93 | 91 | Cross arm bracing support, clamps and back plates, fabricated from structural steel sections including nuts & bolts, washers etc including bending cold or hot, drilling holes for bolts in any shape or size, indicated or directed. | 0.1 | Quintal | |
| 94 | 92 | Test Point Terminal Block made of Gun metal or phosphorus bronze of size 75 x 75 x 25 mm drilled and screwed including 8mm dia 25mm long hexagonal head screw box all as specified and directed. | 4 | Each | |
| 95 | 93 | Aluminum strip 25 x 3.15 mm with saddles and fixing screws etc. for roof conductors and down conductors above ground | 46 | Running Metre | |
| 96 | 94 | Supply, Installation and Testing Hot & Cold, Invertor Split type Air Conditioner, electric driven, Single Phase, 240 volts, Five Star BEE Rating with Remote Control System, capacity 1.5 Tonnes, with in-built air ioniser and plasma filter for better indoor air quality including necessary wiring and making fixing arrangement for indoor and outdoor unit complete all as specified and as directed. \nNote : The Split AC shall be fitted all as directed at site. The contractor shall make arrangement for cutting chases for laying gas pipes including supply and fixing the copper gas pipes from the indoor unit to the outdoor unit and making good the disturbed surface to match the existing surface. The quoted rate of the contractor shall be deemed to be inclusive of this provision. | 2 | Each | |
| 97 | 95 | Supply, installation and testing Automatic Boost / Buck Transformer for low and high voltage correction, equipped with electric transistorised relay circuit suitable for correction on single phase 50 cycles, AC supply, copper wound, complete with Voltmeter, Ammeter designed for input voltage of 90 Volts to 290 Volts and output voltage stabilised between 200 volts to 240 volts of capacity 05 KVA, 16 Amp with overload short circuit and over voltage protection and time delay with 3 Core copper cable for input and metal clad plug socket for output complete all as specified and as directed.\n | 2 | Each | |
| 98 | 96 | Supply, Installation, Testing and Commissioning, Voltage Stabiliser 15KVA capacity for automatic operation servo controlled, Three Phase, naturally oil cooled, indoor type and designed for input variation between 340V to 460V suitable for unbalanced voltage in each phase with output voltage stabilized at 400/440 Volts with accuracy +/-1%, in each phase and speed of corrections 8 Volts per second for unbalanced supply & unbalanced load, complete with first filling of transformer oil having dielectric strength not less than 30 KV as per IS-335, complete with 0-500 Volts and arrangement to check input voltage and output voltage voltmeter, RYB indication lamp high and low, voltage cut off single phase preventor, time delay relay, servo by pass switch, over load and short circuit trip facility complete all as specified and directed. | 2 | Each | |
| 99 | 97 | Supply, installation, Commissioning and testing of LT Feeder Pillar Box compartmentalised design of size not less than 70cm x 70cm x 25cm suitable for 440 volt Three Phase 4 wire system made out of 2.5 mm CRCA sheet powder coated having gasketed front two hinged doors with locking arrangement including bottom and top detachable gland plate complete with suitable size of rust proof nuts, bolts, and washers etc. complete with mounting accessories including the following components :- | 4 | Each | |
| 100 | 97.01 | (a) Four 30cms long Copper bus bar 400 Amp mounted on epoxy insulators provided with rust proof nuts bolts and washers \n(b) LED indicating Lamps (Red, Yellow, Blue) - 03 Nos. | |||
| 101 | 98 | XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric power cable (heavy duty) with stranded aluminium conductor, 11000 volts, grade cross sectional area 95 Sqmm, 3 core including taking down unserviceable cable and making good disturbed surfaces complete all as specified and as directed. | 950 | Running Metre | |
| 102 | 99 | XLPE insulated armoured heavy duty electric cable with aluminium conductor 1100 volts grade cross sectional area 95 Sqmm 3.5 core, complete all as specified and directed.\n | 900 | Running Metre | |
| 103 | 100 | XLPE insulated armoured heavy duty electric cable with aluminium conductor 1100 volts grade cross sectional area 70 Sqmm 3.5 core, complete all as specified and directed.\n | 1100 | Running Metre | |
| 104 | 101 | XLPE insulated armoured heavy duty electric cable with aluminium conductor 1100 volts grade cross sectional area 50 Sqmm 3.5 core, complete all as specified and directed.\n | 300 | Running Metre | |
| 105 | 102 | XLPE insulated armoured heavy duty electric cable with aluminium conductor 1100 volts grade cross sectional area 35 Sqmm 3.5 core, complete all as specified and directed.\n | 200 | Running Metre | |
| 106 | 103 | XLPE insulated armoured heavy duty electric cable with aluminium conductor 1100 volts grade cross sectional area 25 Sqmm 3.5 core, complete all as specified and directed.\n | 500 | Running Metre | |
| 107 | 104 | Cable Jointing Kit for 11 KV (Earthed) grade cable for outdoor termination heat shrink type joint complete with jointing material and accessories suitable for 3 Core XLPE armoured aluminium conductor cable of size 50 to 95 Sqmm, complete all as specified and directed.\n | 3 | Each | |
| 108 | 105 | Cable Jointing Kit for 11 KV (Earthed) grade cable for straight through cold shrink type joint complete with jointing material and accessories suitable for 3 core XLPE armoured aluminium conductor cable of size 95 Sqmm, complete all as specified and directed.\n | 10 | Each | |
| 109 | 106 | Cable Jointing Kit for 1.1 KV (Earthed) grade cable for straight through heat shrink type joint complete with jointing material and accessories suitable for 3.5 / 4 core XLPE armoured aluminium conductor cable of size 70 to 150 Sqmm, complete all as specified and directed.\n | 8 | Each | |
| 110 | 107 | Cable Jointing Kit for 1.1 KV (Earthed) grade cable for straight through cold shrink type joint complete with jointing material and accessories suitable for 3.5 / 4 core XLPE armoured aluminium conductor cable of size 25 to 50 Sqmm, complete all as specified and directed.\n | 10 | Each | |
| 111 | 108 | Sand cushioning to under ground cable, laid in trenches 8cm thick below the cable and 15cm thick above the cable after laying and stretching the cable complete punned to 18cm, complete all as specified and directed.\nNote : Punned thickness of sand will be measured and paid.\n | 350 | Cubic Metre | |
| 112 | 109 | Brick well burnt locally available sub-class 'B' laid over sand cushioning for mechanical cable protection in trenches with width of brick perpendicular to the length of cable, complete all as specified and as directed. | 29600 | Each | |
| 113 | 110 | Supplying and laying un-reinforced precast concrete cable cover, class HVP, type 1 with peak, size 300mm x 180mm x 40mm, complete all as specified and as directed. | 3040 | Each | |
| 114 | 111 | Cable route indicator of 1.6 mm thick MS sheet welded with 5mm dia rod of size 50cm, complete all as specified and as directed. | 50 | Each | |
| 115 | 112 | Galvanized iron water tubing, light grade, 80mm bore for protection of cable with all fittings fixed to walls and ceilings or laid in floors/road crossing, complete all as specified and directed. | 12 | Running Metre | |
| 116 | 113 | Galvanized iron water tubing, light grade, 50mm bore for protection of cable with all fittings fixed to walls and ceilings or laid in floors/road crossing, complete all as specified and directed. | 6 | Running Metre | |
| 117 | 114 | Galvanized iron water tubing, light grade, 40mm bore for protection of cable / earth strip with all fittings fixed to walls and ceilings or laid in floors/road crossing, complete all as specified and directed. | 9 | Running Metre | |
| 118 | 115 | Earthing complete with galvanised mild steel earth plate electrode of size 600mm x 600mm x 6mm thick buried directly to ground vertically to a depth not less than 2.25 Mtr below the ground level with top edge of earth plate not less than 1.65 Mtr below normal ground level connected to GI strip 32 x 6 mm size and earthing lead protected with 50 mm bore GI pipe, light grade, filling around with charcoal dust and salt including excavation, returning, filling of earth and disposal of surplus soil to a distance not exceeding 50 mtr and connected to GI strip by means of GI nuts, bolts and washers strip connected to earth plate including chamber PCC 1:3:6 type C-1 using 20mm graded crushed stone aggregate in concrete pit pre-cast RCC 40 mm thick reinforced with 6 mm dia round at 75 mm C/C both way with 12 mm dia mild steel plain bar lifting handle 2 Nos funnel with wire mesh 20 mm dia GI pipe light grade watering pipe and frame work complete all as shown in electrical plate No. 3 of SSR Part-I 2009 including testing on completion complete all as specified and as directed. | 6 | Each Set | |
| 119 | 116 | Earthing complete with copper earth plate electrode of size 300 x 300 x 3mm thick buried directly into ground vertically to depth not less than 2.25 metre below normal ground level with top edge of earth plate at a depth not less than 1.5 metre below normal ground level, surrounded on all sides by alternate layers of 150 mm thick charcoal and common salt, connected to galvanized strip of size 25 x 3mm by means of lugs, bolts, nuts, washer, check nuts of galvanised iron or steel all as shown in Electrical plate No.5, wire protected by dia 40mm bore medium grade GI Pipe laid in floor and fixed to wall with proper size of clamps and watering pipe of bore 20 mm dia GI light grade including wire mesh funnel, PCC, earth chamber pit with PCC 1:2:4 type B-1 using 20 mm grade stone aggregate including from work cement mortar including CI Pit cover with frame necessary excavation and earth work in any type of soil including testing on completion for desired result all as specified. | 4 | Each Set | |
| 120 | 117 | Earthing complete with galvanised mild steel earth plate electrode size 600mm x 600mm x 6mm thick buried directly in ground (preferably in vertical position) earth pit not less than 2.25 meter below normal ground level with top edge of the earth plate not less 3 meter (BGL) connected to galvanized iron earth lead wire 4mm dia by means of bolts, nuts, check nut and washer of galvanized iron including PCC pit in RCC 1:2:4 type B-1, precast RCC cover with suitable handle, excavation and earth work in any type of soil, 20mm bore “medium grade” galvanized iron water tubing fixed with cast iron funnel and wire mesh and 15mm bore “light grade” galvanized iron protection pipe for earth lead wire up to 5m length, charcoal, common salt, complete all as shown in EP No 3 of SSR 2009 Part-I, connected to test point complete, all as specified and testing on completion. | 1 | Each Set |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
