Military Engineer Services-MES has published Repairs To Floor , Plaster , Plinth Protection , Block Masonry , Fencing , Sewage Line And Certain E/M Wks To Various E/M Installations And Certain Area Under Age B/R ( Central ) Under Ge ( North ) Pune .. Submission Date for this Tender is 21-01-2021. Electromechanical Work Tenders in GE North Pune Maharashtra. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 14-Jan-2021 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 21-01-2021 |
| Name of Work : REPAIRS TO FLOOR, PLASTER, PLINTH PROTECTION, BLOCK MASONRY, FENCING, SEWAGE LINE AND CERTAIN E/M WKS TO VARIOUS E/M INSTALLATIONS AND CERTAIN AREA UNDER AGE B/R (CENTRAL) UNDER GE (NORTH) PUNE. | |||||
|---|---|---|---|---|---|
| Sl. No. | Item Description | Item Code / Make | Quantity | Unit | |
| 1 | 1 | Demolition of brick work or block masonry / stone masonry built in cement mortar including all quoins, arches, pillars etc complete all as specified and as directed. | 65 | Cum | |
| 2 | 2 | Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed. | 10 | Cum | |
| 3 | 3 | Taking down cement plaster on brick / stone wall including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed. | 600 | Sqm | |
| 4 | 4 | M&L for Brick work with fly ash old size bricks, straight or curved on plan exc 6m mean radius, built in cement mortar 1:6 etc complete all as specified and as directed. | 60 | Cum | |
| 5 | 5 | All as per item No 04 here- in- above but except bricks complete all as specified and as directed. | 5 | Cum | |
| 6 | 6 | M&L for RCC (1:2:4) type B1 using 20 mm graded stone aggregate as in lintels/coping over 1.5 m span etc inluding weathring slightly rounded or chamferred angles including formwork complete all as specified and as directed. Note: Reinforcement shall be measured separately. | 10 | Cum | |
| 7 | 7 | S&F TMT bars 10 mm dia and over cut to length bent to shape required, including cranking, bending hooking etc & binding with and including mild steel binding steel wire (annealed) not less than 0.9 mm dia complete all as specified and as directed. | 500 | Kg | |
| 8 | 8 | S&F Mild steel TMT bars 5 mm to 10 mm dia., cut to length, bent to shape required, in stirrups, spacers and binders and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips complete all as specified and as directed. | 350 | Kg | |
| 9 | 9 | M&L for Providing precast cement concrete (using Type B0 1:2:4 , 12.5 mm graded stone aggregate) louvres and jallies, 25 mm thick (measured solid), including all mouldings including frame set in CM 1:4 complete all as specified and as directed. | 10 | Sqm | |
| 10 | 10 | M&L for Providing precast cement concrete (using Type B0 1:2:4 , 12.5 mm graded stone aggregate) louvres and jallies, 35 mm thick (measured solid), including all mouldings including frame set in CM 1:4 complete all as specified and as directed. | 150 | Sqm | |
| 11 | 11 | M&L for rendering 15 mm thick on fair faces of brick/concrete surfaces in cement mortar (1:6) finished even and smooth without using extra cement complete all as specified and as directed\n | 1200 | Sqm | |
| 12 | 12 | M&L for rendering 15 mm thick on fair faces of brick / concrete surfaces in cement mortar (1:4) finished even and smooth without using extra cement complete all as specified and as directed\n | 200 | sqm | |
| 13 | 13 | M&L for rendering 15 mm thick in cement mortar (1:4), on fair faces of brick / stone or concrete surfaces, finished even and smooth without using extra cement with sponge finish using waterproofing compound @ 3% wt of cement complete all as specified and directed. Note:- WPC will be measured and paid separately | 250 | Sqm | |
| 14 | 14 | Supply only water proofing compound. ISI marked complete all as specified and as directed. | 6 | Kg | |
| 15 | 15 | M&L for complete removal of existing finish/treatment on walls, preparing surface and making surface free from loose particles, oil stains etc and applying two coats of cement base paint any colour as approved complete all as specified and as directed. | 4000 | Sqm | |
| 16 | 16 | M&L for Preparing new plastered surfaces and applying two coats of cement based paint on walls over a coat of white wash complete all as specified and as directed. | 1200 | Sqm | |
| 17 | 17 | M&L for preparation of old painted steel surfaces of any description over 10 cm girth or width and applying one coat of synthetic enamel paint.complete all as specified and as directed. | 1200 | Sqm | |
| 18 | 18 | Excavation in trenches n. exc 1.5 m wide and n. exc 1.5 m depth for foundation or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in Soft / dense soil complete all as specified and as directed | 45 | Cum | |
| 19 | 19 | Excavation in trenches n. exc 1.5 m wide and n. exc 1.5 m depth for foundation or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in Hard / dense soil complete all as specified and as directed | 10 | Cum | |
| 20 | 20 | Demolition of reinforced cement concrete of cover slab of septic tank, manhole covers etc complete all as specified and as directed. | 0.5 | Cum | |
| 21 | 21 | M&L for reinforced cement concrete (nominal mix ) type B-1, 1:2:4 using 20 mm graded stone aggregates as in cover slabs of septic tanks all as specified and as directed. | 0.5 | Cum | |
| 22 | 22 | M&L for Use and waste of formwork to soffits & edges of cover slabs of septic tanks and similar work not exceeding 200 mm thick for fair finished flat surfaces of concrete complete all as specified and as directed. | 10 | Sqm | |
| 23 | 23 | Demolition and breaking up drain pipes RCC set in cement mortar 150 mm bore complete all as specified and directed. NOTE: (i)The measurements shall be taken long the centre line of pipe and fittings. (ii)Excavation work shall be measured separately. | 60 | Rm | |
| 24 | 24 | Demolition and breaking up drain pipes RCC set in cement mortar 200 mm bore complete all as specified and directed. NOTE: (i)The measurements shall be taken long the centre line of pipe and fittings. (ii)Excavation work shall be measured separately. | 80 | Rm | |
| 25 | 25 | M&L for 150 mm dia reinforced cement concrete pipe Class NP2 laid and jointed complete with collars and laid in trenches complete all as specified and as directed. | 60 | Rm | |
| 26 | 26 | M&L for 200 mm dia reinforced cement concrete pipe Class NP2 laid and jointed complete with collars and laid in trenches complete all as specified and as directed. | 80 | Rm | |
| 27 | 27 | Returning, Filling in, including Spreading, Levelling, Watering and Well Ramming in Layers not exc. 250 mm in Soft/Loose Soil, complete all as specified and as directed. | 49.5 | Cum | |
| 28 | 28 | Removing the excavated surplus soils exc 1.5 km n.exc 5 km and depositing where directed at a level n.exc 1.5 m above the starting point (Note : Site of disposal of soil is to located by Contractor himself. If any extra lead for disposal of soil behind 5km will be bear by the Contractor) | 5.5 | Cum | |
| 29 | 29 | M&L for providing plain cement concrete type B1, 1:2:4 ,(using 20 mm graded stone aggregate) as in surface channels and drains forming fair finished drain or channel inner girth in cement concrete, using extra cement, including forms, mouls, mitred / stopped end etc.all as specified and directed. NOTE : Deduction from the volume of concrete shall be made for the channel opening | 1 | Cum | |
| 30 | 30 | M&L for Cement concrete type C2, (1:3:6) (20 mm graded stone aggregate) bed to drain pipe including packing under and haunching against the sides of pipes after they are laid and tested for 150 mm bore pipe. NOTE: (i) Thickness of bed below the barrel of pipes 100 mm .(ii) Width of bed: Outer diameter of drain pipes (not of socket/collars) plus 30 cm. | 55 | Rm | |
| 31 | 31 | M&L for Cement concrete type C2, (1:3:6) (20 mm graded stone aggregate) bed to drain pipe including packing under and haunching against the sides of pipes after they are laid and tested for 200 mm bore pipe. NOTE: (i)Thickness of bed below the barrel of pipes 150 mm .(ii)Width of bed: Outer diameter of drain pipes (not of socket/collars) plus 30 cm. | 70 | Rm | |
| 32 | 32 | M&L for Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished, and reforming benching as required for internal dia of pipe 150mm complete all as specified and as directed. | 4 | Each | |
| 33 | 33 | M&L for Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished, and reforming benching as required for internal dia of pipe 150mm complete all as specified and as directed. | 4 | Each | |
| 34 | 34 | S&F 50 mm thick, 900 mm X 650 mm, heavy duty, factory made precast RCC (1:2:4) type B1 (using 20 mm graded broken stone aggregate) including MS TMT bars 6mm dia @ 150 mm C/C both way and set in CM (1:4) finished the surface even and fair complete all as specified and as directed. | 30 | Each | |
| 35 | 35 | S&F 50 mm thick, 450 mm X 450 mm, heavy duty, factory made precast RCC (1:2:4) type B1 (using 20 mm graded broken stone aggregate) including MS TMT bars 6mm dia @ 150 mm C/C both way and set in CM (1:4) finished the surface even and fair complete all as specified and as directed. | 30 | Each | |
| 36 | 36 | S&F 50 mm thick, 600 mm X 450 mm, heavy duty, factory made precast as in manhole covers without additional frame for fixing RCC (1:2:4) type B1 (using 20 mm graded broken stone aggregate) including MS TMT bars 6 mm dia @ 150 mm C/C both way and set in CM (1:4) finished the surface even and fair including demolition of existing reinforced cement concrete complete all as specified and as directed. | 20 | Each | |
| 37 | 37 | S&F for 50 mm thick, 600 mm X 600 mm, heavy duty, factory made precast as in manhole covers with additional frame for fixing RCC (1:2:4) type B1 (using 20 mm graded broken stone aggregate) including MS TMT bars 6 mm dia @ 150 mm C/C both way and set in CM (1:4) finished the surface even and fair complete all as specified and as directed. | 30 | Each | |
| 38 | 38 | S&F 50 mm thick, 300 mm X 300 mm, heavy duty, factory made precast as in manhole covers with additional frame for fixing RCC (1:2:4) type B1 (using 20 mm graded broken stone aggregate) including MS TMT bars 6 mm dia @ 150 mm C/C both way and set in CM (1:4) finished the surface even and fair complete all as specified and as directed. | 20 | Each | |
| 39 | 39 | M&L for precast reinforced cement concrete type B-1, 1:2:4, using 20 mm graded stone aggregates as in man hole covers / septic tanks including formwork/moulds and set in cement mortar 1:4 all as specified and as directed. Note :- Reinforcement shall be measured seperately. | 1 | Cum | |
| 40 | 40 | M&L for PCC (1:3:6) type C1 (using 20 mm graded stone aggregates) as in sub base complete all as specified and as directed. | 10 | Cum | |
| 41 | 41 | M&L for PCC (1:4:8) type D2 (using 40 mm graded stone aggregates) as in sub base or mass concrete complete all as specified and as directed. | 42.5 | Cum | |
| 42 | 42 | M&L for textured heavy duty exterior tiles of size 300 mm x 300 mm x 8 mm to 10 mm thick ,set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including a screed bed of 15 mm thick in CM (1:4) complete all as specified and as directed. | 150 | sqm | |
| 43 | 43 | M&L for precast cement concrete coloured glazed interlocking block 60 mm thick in floor / pavement laid over 20 to 30 mm thick stone dust cushioning laid dry to the profile all as directed by Engineer-in-Charge. | 200 | Sqm | |
| 44 | 44 | M&L for rubber moulded coloured chequered cement concrete glossy tiles of size 30 cm x 30 cm x 20 to 25 mm thick in floor laid and jointed in cement slurry and pointed in grey cement and pigment over 20 mm thick screed bed in CM (1:6) complete all as specified and as directed. | 250 | Sqm | |
| 45 | 45 | Demolition and breaking up drain pipes (Salt glazed ware, PVC, AC or Reinforced concrete) set in cement mortar/ fixed to walls and as directed. | 110 | Rm | |
| 46 | 46 | Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings,heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (Note : measured overall as fixed along the centre line over fittings and accessories) | 100 | Rm | |
| 47 | 47 | S&F 75 mm dia PVC (SWR) grade single socketed pipes in any length complete with rubber ring joints laid in trenches or in floors / walls complete all as specified and as directed. | 50 | Rm | |
| 48 | 48 | All as per item No 47 here- in- above but 110 mm dia complete all as specified and as directed. | 50 | Rm | |
| 49 | 49 | S&F PVC (SWR) bends of any radius with oval and access door of 75 mm dia.complete all as specified and as directed. | 10 | Each | |
| 50 | 50 | S&F PVC (SWR) bends of any radius with oval and access door of 110 mm dia.complete all as specified and as directed. | 15 | Each | |
| 51 | 51 | S&F Grating doom 100 mm dia of PTMT (Minimum weight 25 gms) complete all as specified & directed. | 1 | Each | |
| 52 | 52 | S&F PVC (SWR) vent cowl of 110 mm bore complete all as specified and as directed. | 5 | Each | |
| 53 | 53 | S&F cast iron Nahani trap with grating of diameter of outlet 75 mm including jointing to waste pipe fixed in cement concrete type B1 (1:2:4). complete all as specified and directed. | 2 | Each | |
| 54 | 54 | S&F (SWR) gully trap 110 / 125 mm setting and jointing with solvent cement. complete all as specified and directed. | 1 | Each | |
| 55 | 55 | M&L for PCC 1:2:4 type B-2 (using 40 mm graded stone aggregate) as in foundation filling and mass concrete complete all as specified and as directed. | 4 | Cum | |
| 56 | 56 | Dismantling fencing wire mesh, any type Complete as specified and as directed .\n | 400 | Sqm | |
| 57 | 57 | Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion in concrete , brick and masonry and making good disturbed ground complete all as directed. | 400 | Rm | |
| 58 | 58 | S&F mild steel framed work such as grill, ornamental type gate along with designer cast iron ornamental pieces etc with ends of bars shouldered or rebated or forged into spike framed guard bars barred iron doors, ladders, framed baluster, walk way, railing; frame work, including pintle hinges, stops, hand-made sliding bolts etc,sliding channels for sliding of gate and similar work conforming to Fe 290 Gde-E-165 complete all as specified & as directed. | 1000 | Kg | |
| 59 | 59 | S&F Mild steel work of angle, channel plates, square/ rectangular pipes etc as in framed roof truss , purlins brackets etc including bending and welding angles,bolts as necessary, gusset plates, riveting, etc , conforming to relevant IS complete all as specified and as directed. | 3000 | Kg | |
| 60 | 60 | S&F 1.0 mm thick mild steel plain black sheet as in wall cladding, steel gates and similar work cut to size, holes punched including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams including bending or turning up, mitred angles etc. as required complete all as specified and as directed. | 5 | Sqm | |
| 61 | 61 | S&F angle iron posts and struts for fencing including cutting tops to shape as directed in fillets (in securing chain link fencing etc ) including all necessary drilling, bolting and riveting etc conforming to Fe-290 Gde-165 quality B complete all as specified and as directed. | 1000 | Kg | |
| 62 | 62 | Excavating post holes or similar holes, each not exceeding 0.5 Cum, getting out in Hard/ Dense soil, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, watering, and removing surplus soil to a distance n.exc 50 m & making good surface complete all as specified and as directed. | 150 | Each | |
| 63 | 63 | Supply only chain link MS galvanised fencing any size or type complete all as specified and as directed. | 1200 | kg | |
| 64 | 64 | Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc., including provision of binding wire complete all as specified and as directed. | 400 | Sqm | |
| 65 | 65 | Dismantling old barbed wire of any description and in any position including removal from site and clearing off the premises complete all as directed. | 1500 | Rm | |
| 66 | 66 | S&F Galvanized, 2 strand, steel barbed wire 2.24mm dia. Barbed with 2mm dia, barbs at 75mm spacing and straining and fixing to any type of standard rails straining bolts, including securing or tying at crossings with and provn of galvanised all as specified and as directed. | 15 | 100 RM | |
| 67 | 67 | Dismantling of stone slabs and tiles of any description or thickness in floor apron etc laid bedded and pointed in cement mortar complete all as directed. | 90 | 10 Sqm | |
| 68 | 68 | Demolition of cement concrete in ground floors and pavings n.exc 15 cm thickness (below or above ground level) complete all as directed. | 44.5 | Cum | |
| 69 | 69 | M&L for cement concrete 1:3:6 Type C-2 (using 40 mm graded stone aggregate) 75 mm thick in plinth protection and courtyard, finished cement surfaces even and smooth without using extra cement complete all as specified and as directed. | 150 | Sqm | |
| 70 | 70 | M&L for Cement Concrete 1:2:4 Type B1 (20 mm Graded Stone Aggregate) 40 mm thick, as in Floors, etc., and finished the Cement Concrete Surfaces Even and Smooth with using Extra Cement, complete all as specified and as directed. | 150 | Sqm | |
| 71 | 71 | M&L for Cement Concrete 1:2:4 Type B2 (40 mm Graded Stone Aggregate) 100 mm thick, as in Floors, etc., and finished the Cement Concrete Surfaces Even and Smooth with using Extra Cement, complete all as specified and as directed. | 100 | Sqm | |
| 72 | 72 | S & F Glass dividing strips, 3 mm thick 38 mm width of strip complete all as specified and as directed. | 50 | RM | |
| 73 | 73 | M&L for Hardcore of guage Broken stone n. exc 63 mm deposited, spread and levelled in layers n exc 150 mm thick, watered and rolled / rammed to a true surface complete all as specified and as directed. | 10 | Cum | |
| 74 | 74 | M&L for granite 20 mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platform and like in CM (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade complete all as specified and as directed. | 20 | Sqm | |
| 75 | 75 | M&L for green marble as in skirting / border including laid over cement slurry jointed with grey cement slurry mixed with pigment to match the shade of slab over and including 10 mm thick rendering in cement mortar (1:3) complete all as specified and as directed. | 15 | Sqm | |
| 76 | 76 | M&L for hand cut kota stone slab flooring 20-25 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab laid over and including screed bed 20 mm thick in cement mortar (1:4), including rubbing and mirror polishing complete all as specified and as directed. | 50 | Sqm | |
| 77 | 77 | Dismantling plain or corrugated steel sheeting, aluminium sheeting any gauge or any thickness, as in roof coverings complete all as directed. | 550 | Sqm | |
| 78 | 78 | S&F fibre glass reinforced translucent corrugated /plain sheeting 2.0 mm thick with two corrugations side lap fixed with coach screw and washer in roof, wall etc. complete all as specified and as directed. | 200 | Sqm | |
| 79 | 79 | S&F pre-painted galvalume aluminum zinc coated GI based corrugated steel sheet 0.50 mm thick fixed in any position where directed of any colour having tensile strength of 550 Mpa as in roof covering /cladding to wall, fixed with self tapping screws with one corrugation side lap, bent to shape complete all as specified and as directed. | 350 | Sqm | |
| 80 | 80 | M&L for removing of plants, bushes, weeds with roots from walls, roofs, chajja, canopy, parapets, roof kerbs, around water tanks, stagings, outlets junctions of water pipe lines, waste water pipe, bends or as directed and filling the disturbed area with cement concrete (1:1.5:3) or cement motar (1:3) using water proofing compound as per manufacturer's instruction and making the patch finished as per existing surroundings complete all as specified and as directed. (Note: Rate quoted is deemed to be included for scaffolding, safety measured required for working on or up to the height of 15 metres vertical or steep slopes) | 15 | Per Job | |
| 81 | 81 | Removing debrises obtained from demolition from various location to dfistance exc 3.00 km but not exc 5.00 km out side MOD land complete all as directed. (Note: Area for disposal of above materials shall be found by contractor him self at out side of MOD land) | 50 | Cum | |
| 82 | 82 | M&L for preparation of old treated plastered / unplastered surfaces by brooming down with steel brush and applying one coat of cement base paint complete all as specified and as directed. | 2000 | Sqm | |
| 83 | 83 | M&L for preparation of new steel surfaces of any description over 10cm width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed. | 150 | Sqm | |
| 84 | 84 | M&L for preparation of old decorated surfaces and applying one coat of Acrylic exterior emulsion paint to mangalore tiles / chequered tiles as in roof / wall / floor etc. complete all as specified and as directed. | 3000 | Sqm | |
| 85 | 85 | M&L for susequent coat of acrylic emulsion paint over and above the previous item on mangalore tiles / chequered tiles as in roof / wall / floor etc. complete all as specified and as directed. | 2000 | sqm | |
| 86 | 86 | S&F aluminium powder coated louvered ventilator with provision of exhaust fan including glass 3 mm thick ordinary quality, frosted and stainless steel wire mesh 0.36 mm dia wire and 1.40 mm aperture etc. complete all as specified and as directed. | 4 | Sqm | |
| 87 | 87 | S&F aluminium powder coated three track sliding window with two glazed shutters with 4 mm thick float glass ordinary quantity and one shutter of stainless steel wire mesh 0.36 mm dia wire and 1.40 mm aperture including good quality of bearing handle, locks, PVC rubber lining etc complete all as specified and as directed. Sections of Jindal company : Three track bottom – 20957, Three track top/vertical – 20958,Handle – 20606, Interlocking – 20605, Top and bottom – 20604. | 20 | Sqm | |
| 88 | 88 | M&L for 12 mm thick mineral fibre false ceiling board on and including GI powder coated grid work of size 605 mm x 605 mm with using 32.5 mm x 23.5 mm x 1.5 mm thick main tee, 26.5 mm x 23.5 mm x 1.28 mm cross tee and 23.5 mm x 23.5 mm x 1.5 mm angle fixed to wall for false ceiling including necessary supporting hanger with 3.0 mm dia GI wire and 'J' bolts washer nuts for securing frame work to ceiling, suspended @ 120 cm C/C both ways, complete all as specified and as directed. | 100 | Sqm | |
| 89 | 89 | Dismantling floor, hearth or wall tiling /paver block/chequered tiles including cement mortar bedding (but not backing), removing rubbish off the premises complete all as directed. | 450 | Sqm | |
| 90 | 90 | M&L for double charge coloured vitrified tiles 10 mm thick (square/rectangular) polished, area of each tile exc. 0.18 sqm but not exc. 0.36 Sqm as in floor etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match colour of tiles, laid over and including 15 mm thick screed bed in cement mortar (1:4) complete all as specified and as directed. | 150 | Sqm | |
| 91 | 91 | M&L for double charge coloured vitrified ceramic tiles of size 600 mm x 100 mm x 10 mm thick as in vertical surface, pattern as approved by GE, set and jointed in neat cement slurry using grey cement and pointed in coloured cement to match the colour of tiles over and including 10 mm thick rendering in cement mortar (1:3) complete all as specified and as directed. | 20 | Sqm | |
| 92 | 92 | M&L for coloured non skid ceramic tiles 7 to 8 mm thick (square/rectangular), area of each tile exceeding 0.11 sq.m but not exceeding 0.18 sq.m as in floor etc., colour and pattern as approved by GE, set and jointed in neat cement slurry using grey cement and pointed in white or coloured cement to match the colour of tiles, laid over and including 15 mm thick screed bed in cement mortar (1:4) complete all as specified and as directed. | 150 | Sqm | |
| 93 | 93 | M&L for coloured glazed ceramic tiles of size 300mm x 200 mm x 7 mm thick of colour as in dado/ skirting and pattern as approved by GE, set and jointed in neat cement slurry using grey cement and pointed in coloured cement to match the colour of tiles over and including 10 mm thick backing coat in cement mortar (1:3) complete all as specified and as directed. | 60 | Sqm | |
| 94 | 94 | M&L for coloured glazed ceramic tiles of size 600 mm x 300 mm x 7 to 8 mm thick of colour and pattern as approved by GE, as in vertical surface, set and jointed in neat cement slurry using grey cement and pointed in coloured cement to match the colour of tiles over and including 10 mm thick screed bed in cement mortar 1:3 including dismantling existing tiling, cement mortar bedding (but not backing), removing rubbish off the premises complete all as specified and as directed. | 60 | Sqm | |
| 95 | 95 | M&L for coloured glazed ceramic highlighter tile of size 600 mm x 300 mm x 7 to 8 mm thick, colour and pattern as approved by GE, as in vertical surface set and jointed in neat cement slurry using grey cement and pointed in coloured cement to match the colour of tiles over and including 10mm thick screed bed in cement mortar 1:3 etc including dismantling existing tiling, cement mortar bedding (but not backing), removing rubbish off the premises complete all as specified & as directed. | 10 | Sqm | |
| 96 | 96 | S&F in repair 3 mm thick, plain sheet glass ordinary quality and glazing with oil putty in square not exc 0.50 sqm in each panes including hacking out old broken glass (any thickness size quality in description from metal frame including punching or drilling old glazing/springs clips and rubbish off the premises complete all as specified and as directed. | 20 | Sqm | |
| 97 | 97 | Taking up or down 15 mm bore steel tubing with all fittings and connections including cleaning for refixing or removal to store complete all as directed. | 50 | RM | |
| 98 | 98 | Taking up or down 20 mm bore steel tubing with all fittings and connections including cleaning for refixing or removal to store complete all as directed. | 25 | RM | |
| 99 | 99 | Refixing 20 mm dia old steel tubing and connections in new or old position (walls, ceiling, floors, etc.) complete all as directed. | 5 | RM | |
| 100 | 100 | Refixing 15 mm dia old steel tubing and connections in new or old position (walls, ceiling, floors, etc.) complete all as directed. | 5 | RM | |
| 101 | 101 | S&F 15 mm bore GI tubing 'medium grade' galvanised, with all fittings and fixed to walls and ceiling or laid in floors complete all as specified and as directed. | 45 | RM | |
| 102 | 102 | S&F 20 mm bore GI tubing 'medium grade' galvanised, with all fittings and fixed to walls and ceiling or laid in floors complete all as specified and as directed. | 20 | RM | |
| 103 | 103 | S&F Factory made solid panel PVC door shutter 30 mm thick (stile) consisting of frame made out of MS tubes for top & bottom rails, MS frame covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail ,lock rail & bottom rail on either side & as gap insert for top rail & bottom rail ; Panelling of plain colour PVC sheet fitted in the M.S frame welded/scaled to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement and fixing in the frame as per manufacturer's instructions and as directed by Engineer-in-Charge. | 30 | Sqm | |
| 104 | 104 | S & F Solid PVC Door Frame of size 50 mm X 47 mm made out of 5 mm plain colour PVC sheet reinforced with M S Square tube,supplying and fixing in opening as per manufacturers instructions complete all as specified and as directed. | 40 | RM | |
| 105 | 105 | S & F 30 mm thick flush shutters, solid core construction with block board core and plywood face panels, commercial type on both faces including second class hard wood plain cover fillets 35x6 mm all around the shutter complete all as specified and as directed. | 50 | Sqm | |
| 106 | 106 | S&F second class hard wood 35 mm Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats. including taking down shutters of any description complete all as specified and as directed. | 20 | Sqm | |
| 107 | 107 | M&L for preparation of new untreated wooden surfaces of any description, not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed. | 100 | Sqm | |
| 108 | 108 | Taking down chowkats or frames with shutters (without taking off shutters from frame) area exc.1.5 sqm and not exc.4 sqm each complete all as directed | 25 | Each | |
| 109 | 109 | Taking down chowkats or frames with shutters (without taking off shutters from frame) area not exc.1.5 sqm each complete all as directed. | 20 | Each | |
| 110 | 110 | Taking down shutters of any description, area not exc.1 sqm each complete all as directed. | 20 | Each | |
| 111 | 111 | Taking down shutters of any description, area exc.1 sqm and not exc. 2 sqm each complete all as directed. | 25 | Each | |
| 112 | 112 | S&F in repair for vitreous china European type wash down water closet pan, (Pedestal pattern), white including plastic water closet white closed pattern with flat bottom and cover with mild steel chromium plated hinging device and fixing bolts, necessary inlet and outlet, anti-syphonage pipe connections including making good complete all as specified and as directed. | 6 | Each | |
| 113 | 113 | S&F in repairs for vitreous china, squatting pan of 'Orissa' pattern, size 580 mm x 440 mm, white, with 'P' of 'S' Trap, front or back inlet and integral foot rests any pattern, including provision of lime concrete bedding, 10 litres capacity PVC low level flushing cistern, all internal fittings, inlet, outlet pipe connections etc complete all as specified and as directed. | 5 | Each | |
| 114 | 114 | S&F in repairs for 10 litres capacity PVC valveless, syphonic action type, flushing cistern, low level, white with inlet, ball valve, float and handle including bracket complete all as specified and as directed. | 18 | Each | |
| 115 | 115 | S&F in repairs for 5 mm thick float glass looking mirror of any size with 6mm thick ply wood back and aluminium powder coated frame complete all as specified and as directed. | 5 | Sqm | |
| 116 | 116 | S&F in repairs for PVC cabinet with looking mirror, single shutter of size 350 mm X 450 mm X 100 mm complete all as specified and as directed. | 25 | Each | |
| 117 | 117 | S&F in repairs for 15 mm dia bib cock standard without flange of PTMT any colour high pressure screwed for iron pipe as approved by GE complete all as specified and as directed. | 20 | Each | |
| 118 | 118 | S&F 15 mm dia PVC connection 450 mm long including PTMT check nuts etc complete all as specified and as directed | 15 | Each | |
| 119 | 119 | S&F in repairs 15 mm bore pillar tap PTMT any colour high pressure screwed for iron pipe as approved by GE complete all as specified and as directed. | 8 | Each | |
| 120 | 120 | S&F in repairs vitreous chinaware wash hand basin, size 550 mm x 400 mm chromium plated,including CP waste coupling, chain and plug, waste fittings, union and waste pipe 32 mm dia of required length and all necessary inlet & outlet connections complete all as specified and as directed. | 8 | Each | |
| 121 | 121 | S&F in repair for 15 mm bore bib taps chromium plated, fancy type with flange, screwed down, screwed for iron pipe or for ferrule as approved by GE complete all as specified and as directed. | 6 | Each | |
| 122 | 122 | S&F in repairs, chromium plated, health faucet 15 mm bore, as approved by GE complete all as specified and as directed. | 11 | Each | |
| 123 | 123 | S&F 150-200 mm dia half round / semicircular PVC gutter along with all attachments and connecting to rain water pipe complete all as specified and as directed. | 30 | Rm | |
| 124 | 124 | M&L for 18 mm thick plywood BWR grade type BB fixed with fevicol and nails for working table / storage almirah to the size and pattern and as directed by Engr-in-charge. | 60 | Sqm | |
| 125 | 125 | All as per item No 124 here- in- above but 12 mm thick complete all as specified and as directed. | 20 | Sqm | |
| 126 | 126 | All as per item No 124 here- in- above but 6 mm thick complete all as specified and as directed. | 10 | Sqm | |
| 127 | 127 | M&L for stainless steel handle 100 mm long designer type suitable for cupboard complete all as specified and as directed. | 30 | Each | |
| 128 | 128 | M&L for stainless steel hinges 75 mm long suitable for cupboard complete all as specified and as directed. | 30 | Each | |
| 129 | 129 | M&L for 0.90 mm thick decorative laminate type – I of surface finish (colour & pattern as approved) fixed with approved adhesive as per manufacturer’s instruction finished to approved size for working table all as directed by Engineer-in-Charge. | 82 | Sqm | |
| 130 | 130 | M/L for first class H.W. plain cover fillets square, rectangular or triangular in section bull nosed, splayed chamfered or rounded on one edge or face in first class H.W. sectional area n. exc. 6 Sqcm complete all as specified and as directed. | 30 | RM | |
| 131 | 131 | M/L for first class H.W. plain cover fillets square, rectangular or triangular in section bull nosed, splayed chamfered or rounded on one edge or face in first class H.W. sectional area exc. 6 Sqcm and not. exc 13 Sq cm complete all as specified and as directed. | 20 | RM | |
| 132 | 132 | Taking down carefully exising unserviceable any type of point wiring (light, fan, socket or power), complete (fitting such as switches,ceiling rose, pendent, regulators etc) removing material to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately and making good disturbed surfaces of wall, floor etc. complete all as specified and as directed. | 346 | Point | |
| 133 | 133 | Taking down the existing unserviceable main switch / cut out / DBs of any type / capacity / description as existing at site including necessary making good the disturbed surfaces to match with the existing finishes complete all as specified and as directed. | 16 | Each | |
| 134 | 134 | Taking down of old unserviceable sub main wiring of any type complete all as directed. | 150 | RM | |
| 135 | 135 | M&L for point wiring using approved colour coding as per IS ,with multistranded copper conductor 1.5 Sqmm (nominal area), two single core, PVC insulated and unsheathed FRLSH cable 1100 Volts grade ISI-694 marked drawn through in and including heavy duty, PVC concealed conduit including all accessories after chasing in walls etc heavy duty ISI marked with GI sunken boxes 1.2 mm thick, 60 mm deep , with earth dolly, covered with modular white cover plate with frame suitable for modular switches , including PVC insulated multistranded copper conductor 1.5 Sqmm (nominal area) single core FRLSH cable as earth continuity conductor along with wiring and connecting to earth dolly all as specified and as directed for the following | |||
| 136 | 135.01 | One light point controlled by one, one way switch 6 Amps complete all as specified and as directed. | 150 | Per Point | |
| 137 | 135.02 | One exhaust fan point controlled by one, one way switch 6 Amps complete all as specified and as directed. | 20 | Per Point | |
| 138 | 135.03 | One 5 pin socket outlet plug point, 6 Amps, controlled by one, switch on same board complete all as specified and as directed. | 20 | Per Point | |
| 139 | 136 | All as per item No 135 here- in- above but using casing caping only for ceiling portion for one ceiling fan point controlled by one, one way switch 6 Amps complete all as specified and as directed. | 20 | Per Point | |
| 140 | 137 | All as per item No 135 here- in- above but using 2.5 Sqmm single core copper conductor FRLSH cable of multistranded PVC insulated unsheathed 1100 Volts grade for one 5 pin socket outlet plug point, 6 Amps independent including necessary running of 2.5 Sqmm PVC insulated multistranded copper conductor single core FRLSH cable as earth continuity conductor along with wiring and connecting to earth dolly all as specified and as directed. | 25 | Per Point | |
| 141 | 138 | All as per item No 135 here- in- above but using 4.0 Sqmm single core copper conductor FRLSH cable of multistranded PVC insulated unsheathed 1100 Volts grade for 6/16 Amps power point including necessary running of 4.0 Sqmm PVC insulated multistranded copper conductor single core FRLSH cable as earth continuity conductor along with wiring and connecting to earth dolly all as specified and as directed. | 10 | Per Point | |
| 142 | 139 | M&L for point wiring using approved colour coding as per IS ,with multistranded copper conductor 1.5 Sqmm (nominal area), two single core, PVC insulated and unsheathed FRLSH cable 1100 Volts grade ISI-694 marked drawn through in and including heavy duty, ISI marked PVC casing caping including all accessories fixed to wall / ceiling etc heavy duty ISI marked with GI sunken boxes 1.2 mm thick, 60 mm deep , with earth dolly, covered with modular white cover plate with frame suitable for modular switches , including PVC insulated multistranded copper conductor 1.5 Sqmm (nominal area) single core FRLSH cable as earth continuity conductor along with wiring and connecting to earth dolly all as specified and as directed for the following. | |||
| 143 | 139.01 | One light point controlled by one, one way switch 6 Amps complete all as specified and as directed. | 40 | Per Point | |
| 144 | 139.02 | One fan point / exhaust point controlled by one, one way switch 6 Amps complete all as specified and as directed. | 15 | Per Point | |
| 145 | 139.03 | One 5 pin socket outlet plug point, 6 Amps, controlled by one, switch on same board complete all as specified and as directed. | 12 | Per Point | |
| 146 | 140 | All as per item No 139 here- in- above but using 2.5 Sqmm single core copper conductor FRLSH cable of multistranded PVC insulated unsheathed 1100 Volts grade for one 5 pin socket outlet plug point, 6 Amps independent including necessary running of 2.5 Sqmm PVC insulated multistranded copper conductor single core FRLSH cable as earth continuity conductor along with wiring and connecting to earth dolly all as specified and as directed . | 20 | Per Point | |
| 147 | 141 | All as per item No 139 here- in- above but using 4.0 Sqmm single core copper conductor FRLSH cable of multistranded PVC insulated unsheathed 1100 Volts grade for 6/16 Amps power point including necessary running of 4.0 Sqmm PVC insulated multistranded copper conductor single core FRLSH cable as earth continuity conductor along with wiring and connecting to earth dolly all as specified and as directed. | 8 | Per Point | |
| 148 | 142 | S&F Switch piano flush type, single pole, one way, and 6 Amp complete all as specified and as directed. | 297 | Each | |
| 149 | 143 | S&F Socket outlet multipurpose having provision for 3 pin, 15 Amp and 3 pin, 5 Amp, piano flush type complete all as specified and as directed. | 18 | Each | |
| 150 | 144 | S&F Socket outlet 2 in 1, 5 pin, 6A complete all as specified and as directed. | 52 | Each | |
| 151 | 145 | S&F stepped type electronic fan regulator flush type on the existing phenolic laminated sheet etc. as reqd complete all as specified and as directed. | 30 | Each | |
| 152 | 146 | M&L for Lamp holder, PVC/ Polycarbonate type with back plate of brass terminal suitable for batten fittings complete all as specified and as directed. | 85 | Each | |
| 153 | 147 | M&L for Ceiling rose, 3 terminal /PVC/ polycarbonate, isolated body complete all as specified and as directed. | 115 | Each | |
| 154 | 148 | Fixing only serviceable ceiling rose, obtained from item No 1 complete all as specified and as directed. | 15 | Each | |
| 155 | 149 | Taking down fan , carefully ceiling fan exhaust fan of any sweeep keeping in safe custody and refixing the same with replacement of unsv 3 core PVC insulated PVC sheathed 3 core multistranded copper conductor cable of size 23/0.193 from ceiling rose to fan terminal servicing/ overhauling the fan , replacement of fan condenser 2.5 mfd and painting with synthetic enamel white colour paint by spray machine including filling of cavaties with filler material complete all as specified and as directed. | 25 | Each | |
| 156 | 150 | M&L for submain wiring with approved colour coding as per IS with two single core PVC insulated FRLSH cable with stranded copper conductor of size 4 Sqmm nominal area and drawing into concealed PVC non metallic rigid heavy duty conduit and its accessories (ISI marked) of suitable size after chasing in walls etc with two runs of PVC insulated multistranded copper conductor 2.5 Sqmm (nominal area) single core FRLSH cable as earth continuity conductor along with submain wiring and connecting to earth dolly all as specified and as directed.\n Note- Two run of 4 Sqmm, one run of 2.5 Sqmm cable and PVC conduit will be measured as one unit complete all as specified and as directed | 60 | Rm | |
| 157 | 151 | M&L for submain wiring with approved colour coding as per IS with two single core PVC insulated FRLSH cable with stranded copper conductor of size 6 Sqmm nominal area and drawing into concealed PVC non metallic rigid heavy duty conduit and its accessories (ISI marked) of suitable size after chasing in walls etc with two runs of PVC insulated multistranded copper conductor 4 Sqmm (nominal) area) single core FRLSH cable as earth continuity conductor along with submain wiring and connecting to earth dolly all as specified and as directed.\nNote- Two run of 6 Sqmm, one run of 4 Sqmm cable and PVC conduit will be measured as one unit complete all as specified and as directed. | 90 | Rm | |
| 158 | 152 | Supplied and fixed sheet metal enclosure MCB DB Prewired SPN 4 way 200 Amps rated bus bar 240 Volts double door with magnetic locking system including necessary provision for inserting the DBs in wall by cutting the brick/ stone masonary etc and making good of disturbed surface to match the existing colour of wall complete all as specified and as directed. | 6 | Each | |
| 159 | 153 | S&F sheet metal enclosure MCB DB Prewired SPN 8 way 200 Amps rated bus bar 240 Volts double door with magnetic locking system including necessary provision for inserting the DBs in wall by cutting the brick/ stone masonary etc and making good of disturbed surface to match the existing colour of wall complete all as specified and as directed. | 6 | Each | |
| 160 | 154 | S&F sheet metal enclosure MCB DB Prewired SPN 12 way 200 Amps rated bus bar 240 Volts double door with magnetic locking system including necessary provision for inserting the DBs in wall by cutting the brick/ stone masonary etc and making good of disturbed surface to match the existing colour of wall complete all as specified and as directed. | 4 | Each | |
| 161 | 155 | S&F MCB single pole and neutral rated capacity 5 to 32 Amps 240 Volts breaking capacity 10 KA complete all as specified and as directed. | 16 | Each | |
| 162 | 156 | S&F MCB single pole rated capacity 5 to 32 Amps 240 Volts breaking capacity 10 KA complete all as specified and as directed. | 124 | Each | |
| 163 | 157 | S&F exhaust fan 1400 rpm, 300 mm, blade sweep,steel blade material, 01 No of speed set 220/230V, AC, 50 Hz complete with louvers & shutters & provision of 3 core 1.5 sq. mm copper conductor PVC insulated & PVC sheeted flexible wire from ceiling rose/connector to fan including making connections complete all as specified & as directed .\n | 10 | Each | |
| 164 | 158 | M&L for cutting and making hole into or through cement concrete or stone masonery wall of thickness upto 45 cm and in girth 45 cm for fixing exhaust fan of size 300mm sweep & providing fasterner grouted in wall four nos inside for fixing of exhaust fan and four nos outside for louvers and redressing the surface and making smooth with cement plaster 1:4 to match existing surface incl lime white wash all as spd and directed all as specified and as directed. | 10 | Each | |
| 165 | 159 | S&F wall mounted LED 20 watts , LED batten for surface and pendant application, Anodized extruded aluminium housing, high transmissitivity diffuser and high lumen output, 230 volts etc complete with all accessories internally pre wired and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting complete all as specified and as directed. | 80 | Each | |
| 166 | 160 | S&F for Energy saving new generation environmental friendly long life versatile aluminium presure die cast housing with toughened glass cover IP 66 rating for security light fitting luminaire with high power LEDs as light source and electronic driver of capacity 30 watts with pre wired and necessary mounting arrangements and provision of 2.5 sq mm three core copper conductor cable multi stranded from ceiling rose to light fitting including necessary dia GI pipe medium grade bracket 1.5 mtr long bend to required shape and including taking down old unserviceable existing light fitting of any description complete all as directed by Engineer- in-charge. | 25 | Each | |
| 167 | 161 | M&L for Earthing complete with galvanised steel earth plate electrode 600 mm x 600 mm x 6.0 mm thick, buried vertically in ground (Earth pit not less than 2.25 metres deep below normal ground level and top edge of the plate not less than 1.5 m below ground level), connected to and including galvnised steel earthing lead wire 4 mm dia, by means of bolts, nuts & checknuts and washers etc; GI pipe 15 mm dia 'medium grade' pipe for protection of G.I earth lead wire, both shall be provided to the extent of 7.5 metres, all as shown on electrical plate No 3 of MES SSR-2009 Part-I, other end connected to electrical main switch board (inside the bldg) GI protection pipe buried in ground, laid under floors/plinths or fixed on walls or concealed in walls etc; with provision of mixture of charcoal dust & common salt packed upto minimum 150 mm all around the earth plate, including PCC (1: 2 : 4) type B-1 earth pit with M.S angle iron frame, cast iron cover with locking arrangement, with G.I 20 mm dia 'medium grade' pipe and MS funnel with wire mesh for watering arrangement, including necessary excavation and earth work in any type of strata & testing on completion . NOTE:-GI earth wire and GI pipe 20mm bore 'medium grade' for encasing GI wire upto 7.50m length per earthing is included in quoted rate | 4 | Each | |
| 168 | 162 | S&F Energy saving new generation cast aluminium housing , heat resistant toughened glass IP65, Gate top light fitting 290 mm length, height 653 mm suitable for 30 watt lamp including lamp taking down old unserviceable existing light fitting of any description complete all as directed by Engineer- in-charge. | 2 | Each | |
| 169 | 163 | S&F Energy saving new generation die cast aluminium housing frosted PC diffuser ,IP54 gate light fitting suitable for 12 watt lamp including lamp taking down old unserviceable existing light fitting of any description complete all as directed by Engineer- in-charge. | 6 | Each |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
