Military Engineer Services-MES has published Repair/ Maintenance And Improvement Of Main Distribution Boards , Submain Wirings , Building Street Lights , Building Earthings , Mcbs And Other Internal Electrical Fittings And Fixtures And Allied Works Under Ge ( East ) Mathura. Submission Date for this Tender is 26-01-2021. Distribution Board Tenders in GE (EAST), MATHURA Uttar Pradesh. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 12-Jan-2021 | AMENDMENT | BOQ | 19-01-2021 |
| 2 | 19-Jan-2021 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 26-01-2021 |
| Name of Work: REPAIR/ MAINT AND IMPROVEMENT OF MAIN DISTRIBUTION BOARDS, SUBMAIN WIRINGS, BUILDING STREET LIGHTS, BUILDING EARTHINGS, MCBS AND OTHER INTERNAL ELECTRICAL FITTINGS & FIXTURES AND ALLIED WORKS UNDER GE (EAST) MATHURA | |||||
|---|---|---|---|---|---|
| Sl. No. | Item Description | Item Code / Make | Qty | Units | |
| 1 | 1 | Taking down old unserviceable/burnt sub main wiring of any size including earth wire and making good to the disturbed surfaces and removing the material from site complete all as directed. | 775 | RM | |
| 2 | 2 | Material and labour for submain wiring along with earth continuity conductor with PVC insulated FRLS multistranded copper conductor cable (Phase-Red, Neutral-Black, Earth-Green) drawn in and including concealed rigid non metallic PVC conduit medium grade, ISI marked ivory colour alongwith accessorirs of following sizes in 25 mm dia PVC conduit all as directed. | |||
| 3 | 2.01 | 2x2.5 Sqmm + 1x2.5 Sqmm (earth). | 75 | RM | |
| 4 | 2.02 | 2x4 Sqmm + 1x4 Sqmm (earth). | 200 | RM | |
| 5 | 2.03 | 2x6 Sqmm + 1x6 Sqmm (earth). | 300 | RM | |
| 6 | 3 | Material and labour for submain wiring along with earth continuity conductor with PVC insulated FRLS multi stranded copper conductor cable (Phase-Red, Neutral-Black, Earth-Green) drawn in existing concealed rigid non metallic PVC conduits of following sizes: | |||
| 7 | 3.01 | 2x4 Sqmm + 1x4 Sqmm (earth). | 100 | RM | |
| 8 | 3.02 | 2x6 Sqmm + 1x6 Sqmm (earth). | 100 | RM | |
| 9 | 4 | Taking down unserviceable MCB distribution boards with incoming and outgoing controls any make and capacity after disconnecting of electric connections complete all as directed. | 62 | Each | |
| 10 | 5 | S&F powder coated CRCA steel sheet MCB distrbution board, IP-43 IK-09 protection, double door recess mounted for 240 volts, single pole and neutral 4 way with 100 Amps rated copper bus bar, type complete all as directed. | 20 | Each | |
| 11 | 6 | S&F powder coated CRCA steel sheet MCB distrbution board, IP-43 IK-09 protection, double door recess mounted for 240 volts, single pole and neutral 8 way with 100 Amps rated copper bus bar, type complete all as directed. | 25 | Each | |
| 12 | 7 | S&F powder coated CRCA steel sheet MCB distrbution board, IP-43 IK-09 protection, double door recess mounted for 240 volts, single pole and neutral 12 way with 100 Amps rated copper bus bar, type complete all as directed. | 7 | Each | |
| 13 | 8 | S&F powder coated CRCA steel sheet MCB distrbution board, IP-43 IK-09 protection, double door recess mounted for 240 volts, single pole and neutral 16 way with 100 Amps rated copper bus bar, type complete all as directed. | 10 | Each | |
| 14 | 9 | Taking down unserviceable MCBs of any make and capacity after disconnecting of electric connections complete all as directed. | 410 | Each | |
| 15 | 10 | S&F MCB triple pole and neutral 240 volts, C series of capacity 63 Amps of breaking capacity 10 KA including connections with copper lugs of suitable size in MCB DBs all as directed. | 30 | Each | |
| 16 | 11 | S&F MCB Single pole and neutral 240 volts, C series of capacity 6 to 32 Amps of breaking capacity 10 KA including connections with copper lugs of suitable size in MCB DBs all as directed. | 290 | Each | |
| 17 | 12 | S&F MCB Single pole and neutral 240 volts, C series of capacity 6 to 20 Amps of breaking capacity 10 KA including connections with copper lugs of suitable size in MCB DBs all as directed. | 90 | Each | |
| 18 | 13 | Disconnecting electric connection and taking down old unserviceable electric meter from existing location and depositing MES store yard. | 75 | Each | |
| 19 | 14 | S&F microprocessor based single phase electronic tamper proof energy meter of rating 10 to 60 amp with optical communication port, conforming to IS 13779. \nMake :- Secure or equivalent make given under list of makes | 70 | Each | |
| 20 | 15 | S&F microprocessor based AC three phase static energy meter of accuracy class 1.0, 3x240V, 50 Hz with optical port and with backlit LCD display of rating 20 to 100 amp. \nMake Secure or equivalent make given under list of makes. | 5 | RM | |
| 21 | 16 | Dismantling the existing unserviceable earthing of any type and Material and labour for renewal of same complete with GI earth plate 600mm x 600mm x 6 mm thick electrode buried directly in ground (earth pit not less then 2.25 metres deep below ground level ) with top edge of the plate not less then 1.5 metres below normal ground level connected to GI wire 4.0 mm as earth lead by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 of MES schedule Part-I and incl 15 mm bore light grade GI protection pipe (upto 7.5 metres beyond outer edge of earth pit) PCC M-10 grade (Nominal Mix) using 40mm graded stone aggregate in pit with 40mm thick RCC cover in reinforced cement concrete M-15 grade (Nominal Mix) using 20mm graded stone aggregate, reinforced with 6mm dia bar both way @ 150mm c/c, watering arrangement with funnel and wire mesh and 20 mm bore light grade GI watering pipe, common salt and charcoal filling, necessary excavation and earth work complete. | 18 | Each set | |
| 22 | 17 | Dismantling the existing unserviceable earthing of any type and Material and labour for renewal of same complete with GI earth plate 600mm x 600mm x 6 mm thick electrode buried directly in ground (earth pit not less then 2.25 metres deep below ground level ) with top edge of the plate not less then 1.5 metres below normal ground level connected to GI strip of size 32x6 mm as earth lead by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 of MES schedule Part-I and incl 15 mm bore light grade GI protection pipe (upto 7.5 metres beyond outer edge of earth pit), PCC M-10 grade (Nominal Mix) using 40mm graded stone aggregate in earth pit including 40mm thick RCC cover with reinforced cement concrete M-15 grade (Nominal Mix) using 20mm graded stone aggregate, reinforced with 6mm dia bar both way @ 150mm c/c, watering arrangement with funnel and wire mesh and 20 mm bore light grade GI watering pipe, common salt and charcoal filling, necessary excavation and earth work complete. | 8 | Each set | |
| 23 | 18 | Supplying and fixing LT panel out door type made out of MS sheet of 3.15 mm thick with alluminum busbar, duly powder coated & mounted on angle iron frame made out of size 50x50x6mm, 90 cm high consisting of the following accessories:- \n(i) MCCB TPN 415 volts 160 Amp, 25 KA adjustable type ---01 Nos (For incoming)\n(ii) MCB SPN 230 volts 63 Amp, 10 KA - 04 Nos (for outgoing)\n(iii) Enclosure for mounting single phase KWH electric meter - 04 Nos (for outgoing)\n(iv) LED indicating lamp cluster type set of three colour in RED/BLUE/ GREEN- 01 Sets complete. \n(v) Digital multifunction meter with volmeter (0-500V), Ampmeter (0-250) & frequency meter- 01 Nos complete.\n(vi) Grouting of panel 60cm above GL, embedded in PCC M-15 grade (Nominal mix) using 20 mm graded stone aggregate up to 30 cm complete. | 1 | Each | |
| 24 | 19 | S&F LT panel out door type made out of MS sheet of 3.15 mm thick with alluminum busbar, duly powder coated & mounted on angle iron frame made out of size 50x50x6mm, 90 cm high consisting of the following accessories:- \n(i) MCCB TPN 415 volts 100 Amp, 25 KA adjustable type ---01 Nos (For incoming)\n(ii) MCB SPN 230 volts 63 Amp, 10 KA - 04 Nos (for outgoing)\n(iii) Enclosure for mounting single phase KWH electric meter - 04 Nos (for outgoing)\n(iv) LED indicating lamp cluster type set of three colour in RED/BLUE/ GREEN- 01 Sets complete. \n(v) Digital multifunction meter with volmeter (0-500V), Ampmeter (0-250) & frequency meter- 01 Nos complete.\n(vi) Grouting of panel 60cm above GL, embedded in PCC M-15 grade (Nominal mix) using 20 mm graded stone aggregate up to 30 cm complete. | 1 | Each | |
| 25 | 20 | S&F in replacement LED Bulk Head with PDC aluminium housing and milky diffuser capacity 10 Watt complete including connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as directed. \nMake :- Cat part No LTB10WLED in C&S or equivalent in Philips/Osram. | 50 | Each | |
| 26 | 21 | S&F in replacement building street light fitting, IP66 powder coated pressure die cast aluminium with heat resistant toughened glass complete of 25 Watt capacity including fixing arrangement complete with all accessories including connecting up with twin core twisted flexible copper conductor cable with suitable size all as directed. \nMake :- Cat part No LTESSI25WLED in C&S or equivalent in Philips/Osram. | 30 | Each | |
| 27 | 22 | S&F in replacement building street light fitting, IP66 powder coated pressure die cast aluminium with heat resistant toughened glass complete of 30 Watt capacity including fixing arrangement complete with all accessories including connecting up with twin core twisted flexible copper conductor cable with suitable size all as directed. \nMake:- Cat part No LTESSI30WLED in C&S or equivalent in Philips/Osram. | 30 | Each | |
| 28 | 23 | S&F integrated type LED tube light fitting, indoor decorative aluminum extruded T-5, 4 ft white complete of capacity 1x20 Watt including making electrical connections with twin core twisted flexible copper wire of suitable size all as directed. \nMake:- Cat Part No LTTB4F20WLED/W in C&S or equivalent in Philips/Osram. | 300 | Each | |
| 29 | 24 | S&F integrated type LED tube light fitting, indoor decorative aluminum extruded T-5, 4 ft white complete of capacity 1x20 Watt including making electrical connections with twin core twisted flexible copper wire of suitable size all as directed. \nMake:- Cat Part No LTTB4F20WLED/W in C&S or equivalent in Philips/Osram. | 300 | Each | |
| 30 | 25 | S&F Aesthetically designed 2'x2' LED recess mounting extruded aluminum housing Flat panel, soft-light and glare free symmetrical illumination of capacity 45 Watts. \nMake:-C&S Cat part No LTCRP45WLED2X2 or equivalent make in Philips, Crompton. | 20 | Each | |
| 31 | 26 | S&F LED round recess, aluminum housing slim down light fitting of capacity 09 Watts. \nMake:-C&S Cat part No LTCRSLM9HPLEDRND/W or equivalent make in Philips, Crompton. | 50 | Each | |
| 32 | 27 | S&F LED round recess, aluminum housing slim down light fitting of capacity 12 Watts. \nMake:-C&S Cat part No LTCRSLM12PLEDRND/W or equivalent make in Philips, Crompton. | 50 | Each | |
| 33 | 28 | S&F LED round recess, aluminum housing slim down light fitting of capacity 15 Watts.\nMake:-C&S Cat part No LTCRSLM15PLEDRND/W or equivalent make in Philips, Crompton. | 50 | Each | |
| 34 | 29 | Supply & fixing indoor wall mounted fitting with LED retrofit bulb of capacity 09 watts all as directed at site. Make:-Philips Cat Part No. 919215850070 or equivalent make in Crompton. | 270 | RM | |
| 35 | 30 | Supply & fixing in replacement LED indoor wall mounted fitting all as directed at site. Make:- Philips Cat Part No. 919215850349 or equivalent in Crompton. | 30 | Each | |
| 36 | 31 | Supply & fixing in replacement LED indoor wall mounted fitting all as directed at site. Make:- Philips Cat Part No. 919215850796 or equivalent in Crompton. | 30 | Each | |
| 37 | 32 | Taking out old unserviceable/burnt LT UG cable of any size including and making good to the disturbed surfaces and removing the material from site complete all as directed. | 1500 | RM | |
| 38 | 33 | Excavating in trenches for laying under ground cable, erection of poles and stays in any type of soil not exceeding 1.5 meter wide and not exceeding 1.5 meter deep and getting out complete all as specified and directed by Engr–in–charge. | 250 | Cum | |
| 39 | 34 | Returning, filling in including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick complete all as specified and directed by Engr in charge. | 150 | Cum | |
| 40 | 35 | Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5m above the starting point complete all as specified and directed. | 100 | Cum | |
| 41 | 36 | M&L for sand cushioning to under ground cable in trenches in layers of 8 cm deep before laying the cable and 15 cm deep after laying and stretching the cable complete all as specified and directed by Engr in charge. \nNote:- Measurement shall be taken after gentling puning of sand. | 70 | Cum | |
| 42 | 37 | Supplying and laying un-reinforced precast concrete cable cover class LV type 1 with peak size 250 mm x 150 mm x 40 mm complete all as directed. | 5200 | Each | |
| 43 | 38 | Supply, laying, jointing and testing of XLPE insulated, sheathed, armoured, heavy duty LT 1100 volts grade cable with aluminium conductor laid in trenches / pipes, fixed to poles / walls, fixing with suitable saddle/clamps complete all as directed including taking out the old burnt out cables all as directed of following sizes :- | 300 | RM | |
| 44 | 39 | 16 sqmm 2 core. | 200 | RM | |
| 45 | 40 | 10 Sqmm 4 core. | 500 | RM | |
| 46 | 41 | 10 Sqmm 4 core. | 500 | RM |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
