}

Repairs/Replacement Of Lightning Protection And Miscellaneous E/M Works Under Ge I Rnd Rci Hyderabad, GE I R AND D RCI, HYDERABAD-Telangana

Military Engineer Services-MES has published Repairs/Replacement Of Lightning Protection And Miscellaneous E/M Works Under Ge I Rnd Rci Hyderabad. Submission Date for this Tender is 19-01-2021. Electromechanical Work Tenders in GE I R AND D RCI, HYDERABAD Telangana. Bidders can get complete Tender details and download the document.




Tender Notice

26324998
Corrigendum : Repairs/Replacement Of Lightning Protection And Miscellaneous E/M Works Under Ge I Rnd Rci Hyderabad
Open Tender
Indian
Telangana
GE I R AND D RCI, HYDERABAD
19-01-2021

Tender Details

Repairs / Replacement Of Lightning Protection And Miscellaneous E / M Works Under Ge I Rnd Rci Hyderabad

Corrigendum Details

Sr No CorrigendumDate Corrignedum CorrigendumType NewSubmissionDate
1 12-Jan-2021 Bid Auto Extn Corrigendum Bid Auto Extn Corrigendum 19-01-2021

Key Value

Document Fees
INR 500 /-
EMD
INR 96000.0 /-
Tender Value
Refer document

BOQ Items

Name of Work: REPAIRS/REPLACEMENT OF LIGHTNING PROTECTION AND MISCELLANEOUS E/M WORKS UNDER GE (I) R&D RCI HYDERABAD
Sl No. Item Description Item Code / Make Quantity Units
1 1 Taking down and dismantling old unserviceable damaged, broken / rusted strips including connected items from buildings walls and roofs complete all as directed. 2000 RM
2 2 S&F, aluminium strip 25 x 3.15mm with saddles and fixing screws as roof / down conductors on insulators or fixed in GI pipe complete all as specified and as directed. 1800 RM
3 3 Refixing of aluminium strip obtained from item No 1 with new saddles and fixing screws as roof / down conductors on insulators or fixed in GI pipe complete all as directed.\nNote for item No 2 & 3: 1. Quoted rate shall be deemed to include cost of cutting and jointing aluminium strips with minimum No of rivets/bolt & nuts.\n2. Insulators and GI Pipe will be measured and paid separately. 200 RM
4 4 S&F, porcelain/epoxy, white / brown / green spacer insulator with one GI stud bolt with nut and washer with necessary drilling for bolt hole for holding or fixing roof / down conductor of lightning complete all as specified and directed 4000 EACH
5 5 S&F in repairs, 20mm dia GI light grade pipe with suitable clamps for fixing of air termination rod and earth strip on roof complete all as specified and as directed. 300 RM
6 6 S&F in repairs, air termination single pointed aluminium rod 12mm dia and 300mm long with fixing arrangement complete all as specified and as directed 150 EACH
7 7 S&F in repairs, air termination single pointed copper rod 12mm dia and 300mm long with fixing arrangement complete all as specified and as directed 50 EACH
8 8 S&F in repairs, test point terminal block made of gun metal or phosphorus bronze of size 75x75x25mm, drilled and screwed including 3 Nos 8mm dia 25mm long hexagonal head screws complete all as specified and directed. 200 EACH
9 9 S&F in repairs, Earth continuity conductor with 20x3mm copper strip fixed to wall on batten or recess or chases with necessary porcelain insulators or buried in ground or drawn in conduit/pipe/wall or fixed to poles or any other indicated situation for loop earthing etc., complete all as specified and as directed. 200 RM
10 10 S&F in repairs, 40mm dia GI pipe light grade fixed to walls or laid in trenches etc., for protection of earth strip including sealing ends with hessian cloth impregnated with bituminous compound in ground and with teak wood bushes for ends fixed on walls complete all as specified and directed. 50 RM
11 11 M&L in repairs, Earthing complete with galvanized steel earth plate electrode of size 600 x 600 x 6mm thick buried directly in ground (earth pit not less than 2.25m deep below the normal ground level) with top edge of plate not less than 1.5m below normal ground level connected to GI strip 25x4mm as earth lead by means of bolts, nuts, washers and check nuts made out of galvanized iron or steel all as shown on Electrical Plate No. 3 of SSR Part-I including testing on completion complete all as specified and directed. 20 EACH JOB
12 11.01 Note 1: The unit rate shall also include for earth work in any type of soil, PCC 1:3:6 type C1 chamber, 50mm thick RCC 1:2:4 type B-1 using 20mm graded stone aggregate cover slab reinforced with 6 Nos of 8mm dia TMT bars both ways, funnel with watering pipe 20mm dia medium grade, GI protection pipe medium grade 40mm dia and wire mesh complete in addition to item No. 1(a) to (e) of preamble (Notes) under sub-heading earthing, specified on Sl Page No. 422 of SSR Part-II. \n
13 11.02 2. GI earth Strip beyond 7.5m will be measured and paid separately.
14 12 M&L in repairs, Earthing complete with copper earth plate electrode of size 600 x 600 x 3.15mm thick buried directly in ground (earth pit not less than 2.25m deep below the normal ground level) with top edge of plate not less than 1.5m below normal ground level connected to copper strip 20x3mm as earth lead by means of bolts, nuts, washers and check nuts made out of galvanized iron or steel all as shown on Electrical Plate No. 3 of SSR Part-I including testing on completion complete all as specified and directed. 20 EACH JOB
15 12.01 Note 1: The unit rate shall also include for earth work in any type of soil, PCC 1:3:6 type C1 chamber, 50mm thick RCC 1:2:4 type B-1 using 20mm graded stone aggregate cover slab reinforced with 6 Nos of 8mm dia TMT bars both ways, funnel with watering pipe 20mm dia medium grade, GI protection pipe medium grade 25mm dia and wire mesh complete in addition to item No. 1(a) to (e) of preamble (Notes) under sub-heading earthing, specified on Sl Page No. 422 of SSR Part-II. \n
16 12.02 2. Copper earth strip beyond 7.5m will be measured and paid separately.
17 13 M&L in repairs, Earthing complete with galvanized steel earth plate electrode of size 60cmx60cmx6mm thick buried directly in ground (earth pit not less than 2.25m deep below the normal ground level) with top edge of plate not less than 1.5m below normal ground level connected to GI wire 4mm dia as earth lead by means of bolts, nuts, washers and check nuts made out of galvanized iron or steel all as shown on Electrical Plate No. 3 of SSR Part-I including testing on completion complete all as specified and directed. 20 EACH JOB
18 13.01 Note: The unit rate shall also include for earth work in any type of soil, PCC (1:3:6) type C1 chamber, RCC 1:2:4 type B-1 using 20mm graded stone aggregate, 50mm thick cover slab reinforced with 6 Nos of 8mm dia TMT bars both ways, funnel with watering pipe 20mm dia medium grade, GI protection pipe medium grade 15mm dia and wire mesh complete in addition to item No. 1(a) to (e) of preamble (Notes) under sub-heading earthing, specified on Sl. Page No. 422 of SSR Part-II. \n
19 14 S&F in repairs, LED Aviation obstruction light, yellow painted, die-cast aluminum housing with red polycarbonate dome for better illumination, IP 65, surge and short circuit protection, wide operating voltage and suitable accessories fixed at any height complete all as specified and directed.\nMake: BAJAJ CAT No BGAV 302 LED or equivalent in PHILLIPS/CG/HAVELLS/WIPRO as approved by GE 10 EACH JOB
20 15 Supply and erect steel tubular swaged poles complete with cast iron base plate, finial taper plug, bolts, nuts, screws as specified type 410 SP-31 (9 metre long) complete including 2 coats of aluminium paint over a coat of primer on all exposed surfaces and tarring with black bituminous paint to embedded portion in PCC and providing 3 No of 15cm wide circular bands in black & yellow paint starting from 1.0m above coping at a gap of 15cm in between 2 bands and numbering of pole in yellow paint over black painted back ground at a height of 2m from bottom of pole with 5 cm large bold letters 2" wide including taking down old unserviceable pole of any type complete all as specified and directed.\n 6 EACH JOB
21 15.01 Note: 1. Excavation and earth work shall be measured and paid separately.\n2. PCC foundation and coping shall be measured and paid separately.
22 16 Excavation in trenches not exceeding 1.50m wide and not exceeding 1.50m depth for foundation, for laying of pipes/cables/poles etc., and getting out in any type of soil complete all as specified and directed. 12 CUM
23 17 Excavation in trenches not exceeding 1.50m wide and exceeding 1.50m depth for foundation, for laying of poles etc., and getting out in any type of soil complete all as specified and directed. 1 CUM
24 18 Returning, filling in, including spreading, leveling, watering and well ramming in layers not exceeding 25cm thick each layer as in soil complete all as specified and as directed. 2 CUM
25 19 Removing excavated material/soil to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and as directed. 11 CUM
26 20 M&L, PCC 1:3:6 type C-2 using 40mm graded stone aggregate as in foundation of poles, filling and mass concrete complete all as specified and directed. 11 CUM
27 21 M&L, PCC 1:2:4, type B-1 using 20mm graded stone aggregate as in coping of poles including necessary formwork and other similar works complete all as specified and directed. 2.5 CUM
28 22 S&F in repair, 90W high efficient LED Street light fixture, single piece aluminum pressure die cast housing (LM6 alloy), Luminaire system efficacy =125 lm/W, System lumens 11500lm, high purity polycarbonate/toughened glass diffuser, with silicon gaskets for IP66 (No glue) protection, IK07, surge protection not less than10KV, IEC 60598 to be followed, driver efficiency >85%, power factor >0.95, THD =10%, driver make must be as luminares, LED used to be SMD LED, secondary optics is must for better light distribution, LED Type for better color matching and to avoid color shift with LED binning as per ANSI standard, LED Makes: Nichia/ Cree/ Osram/ Philips Lumiled, colour rendering index CRI >70, temperature range 0 to 45 degree centigrade, CCT 5700K, lifetime of LED 50000 hours @ L70 B50 (As per TM21), photo biological safety report as per IEC 62471, voltage range 120-270V AC and safety on low voltage/high voltage, BIS R No. is mandatory and name of the company or logo must be embossed for LED light fixtures/drivers, submission of LM79, LM80 certification & TTR before claiming payment, Fixture shall be fitted to bracket 20 to 50mm dia complete all as specified and directed.\nMake: PHILIPS Model No BRP409 LED115 CW SLA FG PSU GR V2 or Havells Model No ENDURAPEARLPLUSSL 90WLED757PASYTOPCASTCC or Techno commercially equivalent in Wipro.\n 20 EACH JOB
29 23 S&F in repairs, 150W high efficient LED Flood light fixture, aluminum pressure die cast housing (ADC12 alloy) along with mounting bracket for aiming, System lumens 16500lm, Luminaire system efficacy =110lm/W, toughened glass diffuser, with silicon gaskets for IP66 (No glue) protection, IK07, surge protection 10KV, IEC 60598 to be followed, driver efficiency >85%, power factor > 0.95, THD =10%, colour rendering index CRI >70, temperature range 0 to 45 degree centigrade, CCT: 5700K, LED Makes: Nichia/ Cree/ Osram/ Philips Lumiled, lifetime of LED 50000 hours @ L70 B50 (As per TM21), photo biological safety report as per IEC 62471, voltage range 120-270V AC and safety on low voltage/high voltage BIS R No. is mandatory and name of the company or logo must be embossed for LED light fixtures/drivers, submission of LM79, LM80 certification & TTR before claiming payment complete all as specified and directed.\nMake: Philips Model No BVP192 LED160 CW NB FG GR PSU or Havells Model No JETAIRISFLS150WLED 757PSYMLTG or Techno commercially equivalent in Wipro.\n 30 EACH JOB
30 24 S&F in repairs, 100W high efficient LED Flood Light fixture, aluminum pressure die cast housing (LM24) along with mounting bracket for aiming, System lumens not less than 11500lm, Luminaire system efficacy =115lm/W, toughened glass diffuser, with silicon gaskets for IP66 (No glue) protection, IK07, surge protection 10KV, IEC 60598 to be followed, driver efficiency >85%, power factor > 0.9, THD =10%, colour rendering index CRI >70, temperature range 0 to 45 degree centigrade, CCT: 5700K , LED used to be SMD LED, secondary optics is must for better light distribution, LED Makes: Nichia/ Cree/ Osram/ Philips Lumiled, lifetime of LED 50000 hours @ L70 B50 (As per TM21), photo biological safety report as per IEC 62471, voltage range 120-270V AC and safety on low voltage/high voltage, BIS R No. is mandatory and name of the company or logo must be embossed for LED light fixtures/drivers, submission of LM79, LM80 certification & TTR before claiming payment complete all as specified and directed.\nMake: Philips Model No BVP192 LED110 CW HO NB FG GR PSU or Havells Model No JETAIRISFLP100WLED 757ARNBLTG or Techno commercially equivalent in Wipro. 30 EACH JOB
31 25 S&F in repairs, 60W high efficient LED Street light fixture, single piece aluminum pressure die cast housing (LM6 alloy), System lumens not less than 6600lm, Luminaire system efficacy =110 lm/W, high purity polycarbonate/glass diffuser, with silicon gaskets for IP66 (No glue) protection, IK07, surge protection in 10KV, IEC 60598 to be followed, driver efficiency >85%, power factor > 0.95, THD =10%, LED Makes: Nichia/ Cree/ Osram/ Philips Lumiled, colour rendering index CRI >70, temp range 0 to 45 degree centigrade, CCT: 5700K, lifetime of LED 50000hours @ L70 B50 (As per TM21), photo biological safety report as per IEC 62471, voltage range 120-270V AC and safety on low voltage/high voltage, BIS R No. is mandatory and name of the company or logo must be embossed for LED light fixtures/drivers, submission of LM79, LM80 certification & TTR before claiming payment complete all as specified and directed.\nMake: Philips Model No BRP062 LED65 CW SLA S1 PSU or Havells Model No ENDURAPEARLNEOSL60WLED 757PASYTOPC or Techno commercially equivalent in Wipro. 400 EACH JOB
32 26 S&F in repairs, 40W high efficient LED Street light fixture, single piece aluminum pressure die cast housing (LM6 alloy), System lumens 4800lm, Luminaire system efficacy =120lm/W, high purity polycarbonate/glass diffuser, with silicon gaskets for IP66 (No Glue) protection, IK07, surge protection 10KV, IEC 60598 to be followed, driver efficiency >85%, power factor > 0.95, THD =10%, LED Makes: Nichia/ Cree/ Osram/ Philips Lumiled, colour rendering index CRI >70, temp range 0 to 45 degree centigrade, CCT: 5700K, lifetime of LED 50000 hours @ L70 B50 (As per TM21), photo biological safety report as per IEC 62471, voltage range 120-270V AC and safety on low voltage/high voltage, BIS R No. is mandatory and name of the company or logo must be embossed for LED light fixtures/drivers, submission of LM79, LM80 certification & TTR before claiming payment, Fixture shall be fitted to bracket 20 to 50mm dia complete all as specified and directed..\nMake: Philips Model No BRP056 LED47 CW SLF PSU S1 or Havells Model No ENDURACITYLITEPLAT + SL40WLED757 PASYBOPC or Techno commercially equivalent in Wipro. 50 EACH JOB
33 27 S&F in repairs, Post Top fixture not less than 25W high efficiency, single piece aluminum pressure die cast housing & polycarbonate diffuser with Luminaire system efficacy not less than 75lm/W and System lumens output >2600lm, CRI>70, surge protection upto 10KV, TDH<10% at full load complete all as specified and directed.\nMake: Philips CAT No BGP 300 LED28 757 PSU PC IN S1 or Havells CAT No CORALPT 35 W LED 757 PSYM TOPC or techno commercially equivalent in Wipro 80 EACH JOB
34 28 S&F in repairs, 50W LED Flood light luminarie, aluminium pressure die cast housing along with mounting bracket, System lumens 4000lm, CRI>70, driver efficiency >85%, PF>0.90, surge protection upto 4KV complete all as specified and directed. \nMake: Wipro CAT No LF9-471-060--XX or Philips CAT No BVP 140 LED50 CW PC WB or Havells CAT No JETA QUANTOFLS50WLED765SYMPC 30 EACH JOB
35 29 S&F, bracket suitable for street light fitting made out of 40mm dia GI tube light grade 1.5m long bent to shape, fixed with necessary nuts bolts and a pair of clamps made of 32x6mm flat iron complete all as specified and directed. 30 EACH JOB
36 30 Supply and laying or fixing or passing through pipe, 4 core 4Sqmm nominal cross section, 1100 volts grade heavy duty cable with PVC insulated aluminium conductor served with an inner sheathing of PVC tape armoured with galvanized steel wire or tape and overall PVC sheathed in service connections including taking down unserviceable cable complete all as specified and directed. 270 RM
37 31 S&F in repairs, electrically operated digital timer switch DIN type daily/weekly programmable every 1 minute, with backup of 6 years, 28 memory locations, current capacity 16A, weekly program, with 1 changeover (CO), total 28 programs for street light suitable to operate on 230Volts complete all as specified and directed.\nMake: IndoAsian CAT No TDA43110 or equivalent in Legrand/Siemens/Schneider 6 EACH
38 32 S&F in repairs, ML 2, 3 pole contactor AC3 rating of 32Amps for complete all as specified.\nMake: L&T CAT No SS90701 or techno commercially equivalent in Siemens/Legrand/ABB /Schneider/C&S 2 EACH
39 33 S&F in repairs, ML 4, 3 pole contactor AC3 rating of 70Amps for complete all as specified.\nMake: L&T CAT No SS90910 or techno commercially equivalent in Siemens/Legrand/ABB /Schneider/C&S 4 EACH
40 34 S&F in repairs, Street light control junction box of size 200 x 160 x 98mm made out of FRP sheet moulded and arrangement for incoming and outgoing 3 phase 4 wire system with R,Y,B & N studs and control for incoming and outgoing cables suitable to 4 core 25 Sqmm with neutral link, 230 volts including MCB SP 10Amp 'D' clamps made of flat iron 25 x 3mm, 2 No suitable to pole of any size including bolts nuts & washers etc., complete all as specified and directed.\nMake: Hensel CAT No K 8250 or equivalent in Sintex as approved by GE\nNote: The unit rate quoted shall be deemed to include for incoming & outgoing cables glands & lugs of size up to 25Sqmm 4 core. 50 EACH JOB
41 35 S&F in repairs LED driver suitable for 90W street light fittings complete all as specified and directed. 15 EACH JOB
42 36 S&F in repairs LED driver suitable for 120W street light fitting complete all as specified and directed. 15 EACH JOB
43 37 S&F in repairs LED driver suitable for 140W street light fittings complete all as specified and directed.\nMake for item No 35 to 37: Philips/Wipro/Havells\nNote for item No 35 to 37: Quoted rate shall deemed to include cost of any accessories for proper fixing of LED driver to fitting including hydraulic ladder or aerial access platform mounted on vehicle for replacement. 15 EACH JOB
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail