}

Replacement Of Damaged Lt Cables With New Xlpe L N T Cables And Mccb Of Distribution Transformer Fed From 11Kv Pilot Feeders Model Town Seeloo Sopore Ii Under T And D Loss Reduction Scheme, Sopore-Jammu And Kashmir

Power Development Department has published Replacement Of Damaged Lt Cables With New Xlpe L N T Cables And Mccb Of Distribution Transformer Fed From 11Kv Pilot Feeders Model Town Seeloo Sopore Ii Under T And D Loss Reduction Scheme. Submission Date for this Tender is 08-02-2021. MCCB Tenders in Sopore Jammu And Kashmir. Bidders can get complete Tender details and download the document.




Tender Notice

26320410
Corrigendum : Replacement Of Damaged Lt Cables With New Xlpe L N T Cables And Mccb Of Distribution Transformer Fed From 11Kv Pilot Feeders Model Town Seeloo Sopore Ii Under T And D Loss Reduction Scheme
Open Tender
Indian
Jammu And Kashmir
Sopore
08-02-2021

Tender Details

Replacement Of Damaged Lt Cables With New Xlpe L N T Cables And Mccb Of Distribution Transformer Fed From 11Kv Pilot Feeders Model Town Seeloo Sopore Ii Under T And D Loss Reduction Scheme

Corrigendum Details

Sr No CorrigendumDate Corrignedum CorrigendumType NewSubmissionDate
1 09-Jan-2021 Extension Notice Date 25-01-2021
2 27-Jan-2021 Extension Notice 2 Date 08-02-2021

Key Value

Document Fees
INR 1000 /-
EMD
INR 100000.0 /-
Tender Value
Refer document

BOQ Items

NAME OF WORK: Replacement of Damaged LT Cables with New XLPE LT Cables and MCCB of Distribution Transformer fed from 11KV Pilot feeders (Model Town, Seeloo, Sopore II) under T&D Loss Reduction Scheme
Sl. No. Item Description Item Code / Make Quantity Units
1 1 For distribution Transformer of capacity (400 KVA/500 DT; Two Circuits ) 4 No. BI01010001010000000000000515BI0100001114
2 1.01 Supply,fixing,testing and commissioning of 400 Amp 3 Pole Thermal Magnetic MCCB's having adjustable thermal (0.8 In-1.0 In) . with fixed magnetic setting of 10*In, breaking capacity not less than 65kA (Ics=Icu=100%), with spreader links, phase barriers, & direct mounting rotary operating mechanism(ROM). The ROM shall be lockable in OFF position. The MCCB should be CE marked and shall conform to IEC:60947-2-2003 Standards. The MCCB shall have a maximum operational voltage(Ue) 690V, insulation voltage (Ui) 1000V, and impulse withstand voltage (Uimp) 8kV. MCCBs shall be actuated by a rotary-handle that clearly indicates the three distinctive positions: ON, OFF and TRIPPED, Total Opening Time <10msec, Mechanical Life 25000 operations & Electrical Life @415V AC 10000 operations.\nABB/EATON/L&T/SCHNEIDER/SEIMENS/LEGRAND/HAVELLS MAKE BI01010001010000000000000515BI0100001115 8 No
3 1.02 Supply, Fixing , testing & Commissioning M S Enclosure (1440X1140X450) with Busbar (Aluminium) not less than 800 mm sq. for 2 No. 400A MCCBs, Cable Holding arrangement of suitable size for holding cable, with rubber glands The thickness of enclosure on load bearing side (Backside/Frontside) should not be less than 3 mm and not less than 2 mm for all other sides . Surface preparation by chemical pre-treatment using electrostatic powder painting process minimum coating thickness 80 microns. The Enclosure shall be dust, moisture & vermin proof for tropical use and shall provide a degree of protection not less than IP-55 in accordance with IS:2147 complete as per the drawings annexed. This includes earthing of the enclosure and earthing of neutral (earthing will be done using GI strip of size as per standard). The neutral shall be terminated through Neutral busbar of rated operational current (Ie) 1400 Amps having Impulse Withstand voltage (Uimp) of 3kV . \n(Makes: 1. Tricolite Energy Solutions. 2. Balaji Switchgears. 3. Metfab Products. 4. Milestones Switchgears. 5. M B Automation 6. ALBA Power or equivalent makes/designs) BI01010001010000000000000515BI0100001116 4 No
4 1.03 Providing and fixing of Bi-metalic Clamps suitabe for vertical entry of 300 sqmm cable and 400 /500 KVA DT LT Bush rods. BI01010001010000000000000515BI0100001117 16 No
5 1.04 Supply & Fixing of M.S Iron Cross Arm (75*40*5mm).with one coat of red oxide and two coats of aluminium paint/ Support Angle frame & legs (50x50x6 mm) for Distribution feeder pillar, leg height 1 mt. with 0.3 mt in soil approx. ( Size of MS Iron as per the site requirement for Pole mounted/ Plinth Mounted Structure) BI01010001010000000000000515BI0100001118 126 Kg
6 1.05 Providing and fixing of Galvanized Nuts and Bolts of Sorts BI01010001010000000000000515BI0100001119 12 Kg
7 1.06 Providing and fixing of Galvanized Pole Collar /Clamps BI01010001010000000000000515BI0100001120 16 No
8 1.07 Supply,laying,Testing and Commissioning of 300 mm sq 1-core 1.1 KV grade , stranded Aluminium Conductor, XLPE insulated PVC Outer Sheathed, Unarmoured cable (Havells/Gloster/Paramount/Grandlay) as per IS-7098 amended up to date BI01010001010000000000000515BI0100001121 320 Mtr
9 1.08 Providing and fixing of Pad Clamps of suitable size for 300 sq mm Cable BI01010001010000000000000515BI0100001122 32 No
10 1.09 Providing and fixing of 300 mm sq Aluminium Thimbles. BI01010001010000000000000515BI0100001123 72 No
11 1.1 Cement Grounting with 1:2:4 mix of Standalone arrangement of LTDB BI01010001010000000000000515BI0100001124 0.6 Cum
12 2 For distribution Transformer of capacity (200/250 KVA DT; one Circuit) 30 No. BI01010001010000000000000515BI0100001125
13 2.01 Supply,fixing,testing and commissioning of 400 Amp 3 Pole Thermal Magnetic MCCB's having adjustable thermal (0.8 In-1.0 In) . with fixed magnetic setting of 10*In, breaking capacity not less than 65kA (Ics=Icu=100%), with spreader links, phase barriers, & direct mounting rotary operating mechanism(ROM). The ROM shall be lockable in OFF position. The MCCB should be CE marked and shall conform to IEC:60947-2-2003 Standards. The MCCB shall have a maximum operational voltage(Ue) 690V, insulation voltage (Ui) 1000V, and impulse withstand voltage (Uimp) 8kV. MCCBs shall be actuated by a rotary-handle that clearly indicates the three distinctive positions: ON, OFF and TRIPPED, Total Opening Time <10msec, Mechanical Life 25000 operations & Electrical Life @415V AC 10000 operations.\nABB/EATON/L&T/SCHNEIDER/SEIMENS/LEGRAND/HAVELLS MAKE BI01010001010000000000000515BI0100001126 30 No
14 2.02 Supply, Fixing , testing & Commissioning M S Enclosure (1190X710X355) with Busbar (Aluminium) not less than 500 mm sq. for Single 400A MCCBs, Cable Holding arrangement of suitable size for holding cable, with rubber glands. The thickness of enclosure on load bearing side (Backside/Frontside) should not be less than 3 mm and not less than 2 mm for all other sides . Surface preparation by chemical pre-treatment using electrostatic powder painting process minimum coating thickness 80 microns. The Enclosure shall be dust, moisture & vermin proof for tropical use and shall provide a degree of protection not less than IP-55 in accordance with IS:2147 complete as per the drawings annexed. This includes earthing of the enclosure and earthing of neutral (earthing will be done using GI strip of size as per standard). The neutral shall be terminated through Neutral busbar of rated operational current (Ie) 1400 Amps having Impulse Withstand voltage (Uimp) of 3kV. \n(Makes: 1. Tricolite Energy Solutions. 2. Balaji Switchgears. 3. Metfab Products. 4. Milestones Switchgears. 5. M B Automation 6. ALBA Power or equivalent makes/designs) BI01010001010000000000000515BI0100001127 30 No
15 2.03 Providing and fixing of Bi-metalic Clamps suitabe for vertical entry of 300 sqmm cable and 250 kVA DT LT Bush rods. BI01010001010000000000000515BI0100001128 120 No
16 2.04 Supply & Fixing of M.S Iron Cross Arm (75*40*5mm).with one coat of red oxide and two coats of aluminium paint/ Support Angle frame & legs (50x50x6 mm) for Distribution feeder pillar, leg height 1 mt. with 0.3 mt in soil approx. ( Size of MS Iron as per the site requirement for Pole mounted/ Plinth Mounted Structure) BI01010001010000000000000515BI0100001129 945 Kg
17 2.05 Providing and fixing of Galvanized Nuts and Bolts of Sorts BI01010001010000000000000515BI0100001130 60 Kg
18 2.06 Providing and fixing of Galvanized Pole Collar /Clamps BI01010001010000000000000515BI0100001131 120 No
19 2.07 Supply,laying,Testing and Commissioning of 300 mm sq 1-core 1.1 KV grade , stranded Aluminium Conductor, XLPE insulated PVC Outer Sheathed, Unarmoured cable (Havells/Gloster/Paramount/Grandlay) as per IS-7098 amended up to date BI01010001010000000000000515BI0100001132 1200 Mtr
20 2.08 Providing and fixing of Pad Clamps of suitable size for 300 sq mm Cable BI01010001010000000000000515BI0100001133 120 No
21 2.09 Providing and fixing of 300 mm sq Aluminium Thimbles. BI01010001010000000000000515BI0100001134 270 No
22 2.1 Cement Grounting with 1:2:4 mix of Standalone arrangement of LTDB BI01010001010000000000000515BI0100001135 4.5 Cum
23 3 For distribution Transformer of capacity (100 KVA DT ) 39 No. BI01010001010000000000000515BI0100001136
24 3.01 Supply,fixing,testing and commissioning of 160 Amp 3 Pole Thermal Magnetic MCCB's having adjustable thermal (0.8 In-1.0 In) . with fixed magnetic setting of 10*In, breaking capacity not less than 50kA (Ics=Icu=100%), with spreader links, phase barriers, & direct mounting rotary operating mechanism(ROM). The ROM shall be lockable in OFF position. The MCCB should be CE marked and shall conform to IEC:60947-2-2003 Standards. The MCCB shall have a maximum operational voltage(Ue) 690V, insulation voltage (Ui) 1000V, and impulse withstand voltage (Uimp) 8kV. MCCBs shall be actuated by a rotary-handle that clearly indicates the three distinctive positions: ON, OFF and TRIPPED, Total Opening Time <10msec, Mechanical Life 25000 operations & Electrical Life @415V AC 10000 operations.\n ABB/EATON/L&T/SCHNEIDER/SEIMENS/LEGRAND/HAVELLS MAKE BI01010001010000000000000515BI0100001137 39 No
25 3.02 Supply, Fixing , testing & Commissioning M S Enclosure (860X550X300) with Busbar (Aluminium) not less than 250 mm sq. for Single 160A MCCBs, Cable Holding arrangement of suitable size for holding cable, with rubber glands. The thickness of enclosure on load bearing side (Backside/Frontside) should not be less than 3 mm and not less than 2 mm for all other sides . Surface preparation by chemical pre-treatment using electrostatic powder painting process minimum coating thickness 80 microns. The Enclosure shall be dust, moisture & vermin proof for tropical use and shall provide a degree of protection not less than IP-55 in accordance with IS:2147 complete as per the drawings annexed. This includes earthing of the enclosure and earthing of neutral (earthing will be done using GI strip of size as per standard). The neutral shall be terminated through Neutral busbar of rated operational current (Ie) 1400 Amps having Impulse Withstand voltage (Uimp) of 3kV . \n(Makes: 1. Tricolite Energy Solutions. 2. Balaji Switchgears. 3. Metfab Products. 4. Milestones Switchgears. 5. M B Automation 6. ALBA Power or equivalent makes/designs) BI01010001010000000000000515BI0100001138 39 No
26 3.03 Providing and fixing of Bi-metalic Clamps for Transformer suitabe for vertical entry of 185 sqmm cable and 100 kVA DT LT Bush rods. BI01010001010000000000000515BI0100001139 156 No
27 3.04 Supply & Fixing of M.S Iron Cross Arm (75*40*5mm).with one coat of red oxide and two coats of aluminium paint/ Support Angle frame & legs (50x50x6 mm) for Distribution feeder pillar, leg height 1 mt. with 0.3 mt in soil approx. ( Size of MS Iron as per the site requirement for Pole mounted/ Plinth Mounted Structure) BI01010001010000000000000515BI0100001140 1228.5 Kg
28 3.05 Providing and fixing of Galvanized Nuts and Bolts of Sorts BI01010001010000000000000515BI0100001141 78 Kg
29 3.06 Providing and fixing of Galvanized Pole Collar /Clamps BI01010001010000000000000515BI0100001142 156 No
30 3.07 Supply,laying,Testing and Commissioning of 185 mm sq 1-core 1.1 KV grade , stranded Aluminium Conductor, XLPE insulated PVC Outer Sheathed, Unarmoured cable (Havells/Gloster/Paramount/Grandlay) as per IS-7098 amended up to date BI01010001010000000000000515BI0100001143 1560 Mtr
31 3.08 Providing and fixing of Pad Clamps of suitable size for 185 sq mm Cable BI01010001010000000000000515BI0100001144 156 No
32 3.09 Providing and fixing of 185 mm sq Aluminium Thimbles. BI01010001010000000000000515BI0100001145 468 No
33 3.1 Cement Grounting with 1:2:4 mix of Standalone arrangement of LTDB BI01010001010000000000000515BI0100001146 5.85 Cum
34 4 For distribution Transformer of capacity (63 KVA DT ) 8 No. BI01010001010000000000000515BI0100001147
35 4.01 Supply,fixing,testing and commissioning of 100 Amp 3 Pole Thermal Magnetic MCCB's having adjustable thermal (0.8 In-1.0 In) . with fixed magnetic setting of 10*In, breaking capacity not less than 36 kA (Ics=Icu=100%), with spreader links, phase barriers, & direct mounting rotary operating mechanism(ROM). The ROM shall be lockable in OFF position. The MCCB should be CE marked and shall conform to IEC:60947-2-2003 Standards. The MCCB shall have a maximum operational voltage(Ue) 690V, insulation voltage (Ui) 1000V, and impulse withstand voltage (Uimp) 8kV. MCCBs shall be actuated by a rotary-handle that clearly indicates the three distinctive positions: ON, OFF and TRIPPED, Total Opening Time <10msec, Mechanical Life 25000 operations & Electrical Life @415V AC 10000 operations.\nABB/EATON/L&T/SCHNEIDER/SEIMENS/LEGRAND/HAVELLS MAKE BI01010001010000000000000515BI0100001148 8 No
36 4.02 Supply, Fixing , testing & Commissioning M S Enclosure (860X550X300) with Busbar (Aluminium) not less than 150 mm sq. for Single 100A MCCBs, Cable Holding arrangement of suitable size for holding cable, with rubber glands. The thickness of enclosure on load bearing side (Backside/Frontside) should not be less than 3 mm and not less than 2 mm for all other sides . Surface preparation by chemical pre-treatment using electrostatic powder painting process minimum coating thickness 80 microns. The Enclosure shall be dust, moisture & vermin proof for tropical use and shall provide a degree of protection not less than IP-55 in accordance with IS:2147 complete as per the drawings annexed. This includes earthing of the enclosure and earthing of neutral (earthing will be done using GI strip of size as per standard). The neutral shall be terminated through Neutral busbar of rated operational current (Ie) 1400 Amps having Impulse Withstand voltage (Uimp) of 3kV .\n(Makes: 1. Tricolite Energy Solutions. 2. Balaji Switchgears. 3. Metfab Products. 4. Milestones Switchgears. 5. M B Automation 6. ALBA Power or equivalent makes/designs) BI01010001010000000000000515BI0100001149 8 No
37 4.03 Providing and fixing of Bi-metalic Clamps for Transformer suitabe for vertical entry of 95 sqmm cable and 63 kVA DT LT Bush rods. BI01010001010000000000000515BI0100001150 32 No
38 4.04 Supply & Fixing of M.S Iron Cross Arm (75*40*5mm).with one coat of red oxide and two coats of aluminium paint/ Support Angle frame & legs (50x50x6 mm) for Distribution feeder pillar, leg height 1 mt. with 0.3 mt in soil approx. ( Size of MS Iron as per the site requirement for Pole mounted/ Plinth Mounted Structure) BI01010001010000000000000515BI0100001151 252 Kg
39 4.05 Providing and fixing of Galvanized Nuts and Bolts of Sorts BI01010001010000000000000515BI0100001152 16 Kg
40 4.06 Providing and fixing of Galvanized Pole Collar /Clamps BI01010001010000000000000515BI0100001153 32 No
41 4.07 Supply,laying,Testing and Commissioning of 95 mm sq 1-core 1.1 KV grade , stranded Aluminium Conductor, XLPE insulated PVC Outer Sheathed, Unarmoured cable (Havells/Gloster/Paramount/Grandlay) as per IS-7098 amended up to date BI01010001010000000000000515BI0100001154 320 Mtr
42 4.08 Providing and fixing of 95 mm sq Aluminium Thimbles. BI01010001010000000000000515BI0100001155 96 No
43 4.09 Cement Grounting with 1:2:4 mix of Standalone arrangement of LTDB BI01010001010000000000000515BI0100001156 1.2 No
44 4.1 For distribution Transformer of capacity (25 KVA DT ) 21 No. BI01010001010000000000000515BI0100001157
45 5 Supply,fixing,testing and commissioning of 40 Amp 3 Pole Thermal Magnetic MCCB's having adjustable thermal (0.8 In-1.0 In) . with fixed magnetic setting of 10*In, breaking capacity not less than 36kA (Ics=Icu=100%), with spreader links, phase barriers, & direct mounting rotary operating mechanism(ROM). The ROM shall be lockable in OFF position. The MCCB should be CE marked and shall conform to IEC:60947-2-2003 Standards. The MCCB shall have a maximum operational voltage(Ue) 690V, insulation voltage (Ui) 1000V, and impulse withstand voltage (Uimp) 8kV. MCCBs shall be actuated by a rotary-handle that clearly indicates the three distinctive positions: ON, OFF and TRIPPED, Total Opening Time <10msec, Mechanical Life 25000 operations & Electrical Life @415V AC 10000 operations.\nABB/EATON/L&T/SCHNEIDER/SEIMENS/LEGRAND/HAVELLS MAKE BI01010001010000000000000515BI0100001158 21 No
46 5.01 Supply, Fixing , testing & Commissioning M S Enclosure (860X550X300) with Busbar (Aluminium) not less than 75 mm sq. for Single 40A MCCBs, Cable Holding arrangement of suitable size for holding cable, with rubber glands. The thickness of enclosure on load bearing side (Backside/Frontside) should not be less than 3 mm and not less than 2 mm for all other sides . Surface preparation by chemical pre-treatment using electrostatic powder painting process minimum coating thickness 80 microns. The Enclosure shall be dust, moisture & vermin proof for tropical use and shall provide a degree of protection not less than IP-55 in accordance with IS:2147 complete as per the drawings annexed. This includes earthing of the enclosure and earthing of neutral (earthing will be done using GI strip of size as per standard). The neutral shall be terminated through Neutral busbar of rated operational current (Ie) 1400 Amps having Impulse Withstand voltage (Uimp) of 3kV.\n(Makes: 1. Tricolite Energy Solutions. 2. Balaji Switchgears. 3. Metfab Products. 4. Milestones Switchgears. 5. M B Automation 6. ALBA Power or equivalent makes/designs) BI01010001010000000000000515BI0100001159 21 No
47 5.02 Providing and fixing of Bi-metalic Clamps for Transformer suitabe for vertical entry of 35sqmm cable and 16kVA/25kVA DT LT Bush rods. BI01010001010000000000000515BI0100001160 84 No
48 5.03 Supply & Fixing of M.S Iron Cross Arm (75*40*5mm).with one coat of red oxide and two coats of aluminium paint/ Support Angle frame & legs (50x50x6 mm) for Distribution feeder pillar, leg height 1 mt. with 0.3 mt in soil approx. ( Size of MS Iron as per the site requirement for Pole mounted/ Plinth Mounted Structure) BI01010001010000000000000515BI0100001161 661.5 No
49 5.04 Providing and fixing of Galvanized Nuts and Bolts of Sorts BI01010001010000000000000515BI0100001162 42 Kg
50 5.05 Providing and fixing of Galvanized Pole Collar /Clamps BI01010001010000000000000515BI0100001163 84 Kg
51 5.06 Supply,laying,Testing and Commissioning of 35 mm sq 1-core 1.1 KV grade , stranded Aluminium Conductor, XLPE insulated PVC Outer Sheathed, Unarmoured cable (Havells/Gloster/Paramount/Grandlay) as per IS-7098 amended up to date BI01010001010000000000000515BI0100001164 840 No
52 5.07 Providing and fixing of 35 mm sq Aluminium Thimbles. BI01010001010000000000000515BI0100001165 252 Mtr
53 5.08 Cement Grounting with 1:2:4 mix of Standalone arrangement of LTDB BI01010001010000000000000515BI0100001166 3.15 No
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail