}

Minor Additional / Alteration In House No . 4 In Civil Hospital Sector 45 , Chandigarh, Chandigarh-Chandigarh

Chandigarh Administration Engineering Department has published Minor Additional / Alteration In House No . 4 In Civil Hospital Sector 45 , Chandigarh. Submission Date for this Tender is 10-12-2020. Building Work Tenders in Chandigarh Chandigarh. Bidders can get complete Tender details and download the document.




Tender Notice

26111226
Minor Additional / Alteration In House No . 4 In Civil Hospital Sector 45 , Chandigarh
Open Tender
Indian
Chandigarh
Chandigarh
10-12-2020

Tender Details

Minor Additional / Alteration In House No . 4 In Civil Hospital Sector 45 , Chandigarh

Key Value

Document Fees
Refer document
EMD
INR 5182.0 /-
Tender Value
Refer document

BOQ Items

Name of Work: MINOR ADDITIONAL/ALTERATION IN HOUSE NO. 4 IN CIVIL HOSPITAL, SECTOR 45, CHANDIGARH.
Sl. No. Item Description Item Code / Make Quantity Units
1 1 CARRIAGE OF MATERIALS DSR 1.0 BI01010001010000000000000515BI0100001141
2 1.01 By Mechanical Transport including loading, unloading and stacking (Upto 8Kms) DSR 1.1 BI01010001010000000000000515BI0100001142
3 1.02 Lime, moorum, building rubbish. DSR 1.1.1 BI01010001010000000000000515BI0100001143 3.4 Cum
4 2 Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5 m in width as well as 10 sqm on plan including getting out and disposal of excavated earth upto 50 m and lift upto 1.5 m, as directed by Engineer-in- Charge: DSR 2.1 BI01010001010000000000000515BI0100001144
5 2.01 All kinds of soil DSR 2.1.1 BI01010001010000000000000515BI0100001145 11.15 Sqm
6 3 Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size). DSR 5.3 BI01010001010000000000000515BI0100001146 0.11 Cum
7 4 Centering and shuttering including strutting, propping etc. and removal of form for : DSR 5.9 BI01010001010000000000000515BI0100001147
8 4.01 Shelves (Cast in situ) DSR 5.9.4 BI01010001010000000000000515BI0100001148 1.47 Sqm
9 5 Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. DSR 5.22A BI01010001010000000000000515BI0100001149
10 5.01 Thermo-Mechanically Treated bars of grade Fe-500 D or more. DSR 5.22A.6 BI01010001010000000000000515BI0100001150 23.3 Kg
11 6 Brick work with common burnt clay modular bricks of class designation 7.5 in foundation and plinth in: DSR 6.2 BI01010001010000000000000515BI0100001151
12 6.01 Cement mortar 1:4 (1 cement : 4 coarse sand) DSR 6.2.1 BI01010001010000000000000515BI0100001152 1.02 Cum
13 7 Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) : DSR 11.26 BI01010001010000000000000515BI0100001153
14 7.01 25 mm thick. DSR 11.26.1 BI01010001010000000000000515BI0100001154 12.37 Sqm
15 8 Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete. DSR 11.27 BI01010001010000000000000515BI0100001155 2.91 Sqm
16 9 Extra for pre finished nosing in treads of steps of Kota stone/ sand stone slab. DSR 11.31 BI01010001010000000000000515BI0100001156 49.38 Rmt
17 10 Extra for Kota stone/ sand stone in treads of steps and risers using single length up to 1.05 metre. DSR 11.32 BI01010001010000000000000515BI0100001157 12.37 Sqm
18 11 Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. DSR 12.41 BI01010001010000000000000515BI0100001158
19 11.01 110 mm diameter DSR 12.41.2 BI01010001010000000000000515BI0100001159 12.19 Rmt
20 12 Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. DSR 12.43 BI01010001010000000000000515BI0100001160
21 12.01 110 mm DSR 12.43.2 BI01010001010000000000000515BI0100001161 4 Nos.
22 13 12 mm cement plaster of mix : DSR 13.1 BI01010001010000000000000515BI0100001162
23 13.01 1:4 (1 cement: 4 fine sand) DSR 13.1.1 BI01010001010000000000000515BI0100001163 48.58 Sqm
24 14 Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface : DSR 13.43 BI01010001010000000000000515BI0100001164
25 14.01 Water thinnable cement primer DSR 13.43.1 BI01010001010000000000000515BI0100001165 48.58 Sqm
26 15 Finishing walls with Acrylic Smooth exterior paint of required shade : DSR 13.46 BI01010001010000000000000515BI0100001166
27 15.01 New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) DSR 13.46.1 BI01010001010000000000000515BI0100001167 48.58 Sqm
28 16 Distempering with 1st quality acrylic distember (Ready mix) having VOC content less than 50 grams/ litre of approved brand and manufacture to give an even shade : DSR 13.90 BI01010001010000000000000515BI0100001168
29 16.01 Old work (one or more coats) DSR 13.90.1 BI01010001010000000000000515BI0100001169 97.17 Sqm
30 17 Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. DSR 13.91 BI01010001010000000000000515BI0100001170 48.58 Sqm
31 18 Renewing glass panes, with wooden fillets wherever necessary: DSR 14.6 BI01010001010000000000000515BI0100001171
32 18.01 Float glass panes of nominal thickness 4 mm (weight not less than 10kg/sqm) DSR 14.6.1 BI01010001010000000000000515BI0100001172 0.41 Sqm
33 19 Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. DSR 15.56 BI01010001010000000000000515BI0100001173 48.56 Sqm
34 20 Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. DSR 15.60 BI01010001010000000000000515BI0100001174 1.85 Cum
35 21 Providing and laying (Double Charge of Size 600 x 600mm) vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete in all respect to the entire satisfaction of Engineer in charge. NS BI01010001010000000000000515BI0100001175 22.74 Sqm
36 22 Providing and fixing 15 to 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. NS BI01010001010000000000000515BI0100001176
37 22.01 Granite of any colour and shade BI01010001010000000000000515BI0100001177
38 22.02 Area of slab over 0.50 sqm (Based On DSR No. 8.2.2.2) BI01010001010000000000000515BI0100001178 1.85 Sqm
39 23 Providing and fixing 35mm thick ISI marked flush door shutters with iron butt hinges (heavy weight)125x40x4mm and screws, conforming to IS: 2202 (Part I) non-decorative type, core of block board. The rate further rate includes the cost of aluminium fittings such as one no. 250x16mm sliding bolt, one no. 200x10mm and one no. 150x10mm tower bolt, two nos. 125mm size D-type handles and painting the shutter with two coats of special quality paint over one coat of primer including preparation of plywood surface for painting complete in all respects and to the entire satisfaction of Engineer-in-charges. NS BI01010001010000000000000515BI0100001179 5.64 Sqm
40 24 Providing and applying white cement based putty of average thickness 0.50 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. NS BI01010001010000000000000515BI0100001180 48.58 Sqm
41 25 Providing and fixing Golden Champ chawkhats (kiln seasoned) including cost of straps iron holds fast hinges, screws, nails, fevicol etc. and painting two coats of wood preserver to sides of chawkhats. Rate includes the cost of dismantling of all damages chawkhats and making and good the damaged to walls plaster and floors as required including disposal of rubbish to the dumping ground the rate further includes the cost of painting two coats syn, paint over one coat of wood primer complete in all respect and to the entire satisfaction of Engineer-in-charge. NS BI01010001010000000000000515BI0100001181
42 25.01 2 ½” x 2 ½” BI01010001010000000000000515BI0100001182 11.43 Rmt
43 25.02 4 ½”x 2 ¼ ” BI01010001010000000000000515BI0100001183 15.08 Rmt
44 26 Dismantling of existing Tile Terracing and removing the earth filling under tiles and cleaning the roof surface with wire brushes etc complete in all respect. NS BI01010001010000000000000515BI0100001184 62.42 Sqm
45 27 N.S. Providing and laying integral cement based water proofing treatment including preparation of surgace as required for treatment of roofs, balconies, terraces etc consisting of followign operations: a) applying slurry coat of neat cemet using 2.75 kg/ sqm of cemetn admixed with water proofing compound conforming to IS . 2645 and approved by engineer in charge over the RCC slab including adjoining walls uptp 300 mm height including cleaning the surface before treatment b) laying brick bats with mortar using broken bricks/ brick bats 25 mm to 115 mm sixe with 50% of cement mortar 1: 5 (1 cement : 5 coarse sand ) admixed with water proofing compound conforming to IS : 2645 and approved by engineer in charge to required alope and terracing slabs c) water two days of proper curing applying a second coat of cement slurry using 2.75 kg/ by enginee in charge d) the whole terrace so finished shall be flooded ith water for a minimum period ot two weeks for curing and for final test. All above operations to be done in order and as directed and specified by the Engineer in charge. NS BI01010001010000000000000515BI0100001185 62.42 Sqm
46 28 Providing and fixing Ist quality ceramic glazed wall tiles (size 300mm x 600mm) conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. NS BI01010001010000000000000515BI0100001186 43.5 Sqm
47 29 Providing and fixing IRC fabric of size 1”x 1”x 10 gauge frame with M.S. angle 40 x 40 x6mm, M.S Flat 20 mm x 3mm size including cutting, welding etc. Complete in all respect and to the entire satisfaction Engineer in charge. NS BI01010001010000000000000515BI0100001187 4.45 Sqm
48 30 Providing and laying 60mm thick factory made cement concrete interlocking paver block of M-30 grade made by blcok making machine with wtrong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and inclduing 25mm thick compacted of corase sand, filling the joints with fine sand etc. all complete as per the direction of Engineer in charge N.S. BI01010001010000000000000515BI0100001188 11.15 Sqm
49 31 Providing and laying spreading and compacting Granular Sub-Base material 150mm thick compacted layer (by taking material 1.92 cum for 10 sqm area) of natural sand, morrum, gravel crushed stone or combination thereof as per MORT&H (5th revision) specification, confirming to clause 401 coarse graded grading-III as per table 400-1 of MOR&H specification, including spreading on the prepared sub grade with the help of motor grader or adequate capacity maintaining the required slope and grade during operation, rolling with road roller 8-10 tone with the grade and cross fall (camber) to be checked and any high spot or depressing which becomes apparent, corrected by removing or adding fresh material, including cost of tools and plants, carriage of material from stacks, templated, barrier, lighting arrangement at night, chowkidar and maintenance of diversion etc. complete in all respect as per MORT&H specifications, density of GSB as laid 2gms/ cc & to the entire satisfaction of Engineer-in-charge. NS BI01010001010000000000000515BI0100001189 1.7 Cum
50 32 Providing and fixing 35mm thick Golden Champ wire gauge door shutter consisting of 100mm x 35mm style and top rail 150mm x 35mm lock rail 200mm x 35mm bottom rail wire mesh 22 x 12mm gauge fixed with 1/2" x 3/4” hollock wood beading 3nos 5” Nos hinges aluminium fitting and two nos handles 5” and 1 no tower bolt 8”, 6” and double rubber aluminium door stopper, Single action door spring. Complete fixed in position including the cost of two coats of special quality over one coat of wood primer. Complete in all respect to the entire satisfaction of Engineer-in-Charge. NS BI01010001010000000000000515BI0100001190 5.64 Sqm
51 33 Providing and fixing 35 mm thick Golden Champ wire gauge window shutter with style and 75mm thick wide rails and 12 x 22 gauge wire mesh fixed with 1/2'' x 3/4'' corner beading and including the 2 Nos. of 4'' iron hinges ISI marked aluminium, tower bolt handle etc. The rate also including two coats of special qualtiy paint over one coat of primer complete in complete in all respect and to the entire satisfaction of Engineer-in-charge. NS BI01010001010000000000000515BI0100001191 5.43 Sqm
52 34 Providing and fixing 35 mm thick Golden Champ (kiln seasones) glazed window shutter with 75mm thick wide styles and top and bottom rails. the rate includes the cost of 4mm glass panes fixed with 3/4'' x 3/4'' Hollock wood corner beading 2 Nos. Aluminium belt and Aluminium D-type handle 4" size the window shutter to be painted with two coats of special quality paint over one coat of primer complete in all respect and to the entire satisfaction of Engineer-in-charge. NS BI01010001010000000000000515BI0100001192 5.43 Sqm
53 35 Credit after old dismantled material. NS BI01010001010000000000000515BI0100001193
54 35.01 Earth from the existing terracing @ 145.91/- Cum BI01010001010000000000000515BI0100001194
55 35.02 Brick tile bats @ 600/- Cum BI01010001010000000000000515BI0100001195
56 35.03 Brick tile @ 5/- No. BI01010001010000000000000515BI0100001196
57 36 Recovery of Doors @ 300/- Nos. NS BI01010001010000000000000515BI0100001197
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail