}

Special Repair For Non Residential Building Of Civil Hospital In Sector 22 , And Civil Dispensary 26 , 33 And Dhanas Chandigarh For The Year 2020-21 . , Chandigarh-Chandigarh

Chandigarh Administration Engineering Department has published Special Repair For Non Residential Building Of Civil Hospital In Sector 22 , And Civil Dispensary 26 , 33 And Dhanas Chandigarh For The Year 2020-21 . . Submission Date for this Tender is 08-12-2020. Building Work Tenders in Chandigarh Chandigarh. Bidders can get complete Tender details and download the document.




Tender Notice

26109579
Special Repair For Non Residential Building Of Civil Hospital In Sector 22 , And Civil Dispensary 26 , 33 And Dhanas Chandigarh For The Year 2020-21 .
Open Tender
Indian
Chandigarh
Chandigarh
08-12-2020

Tender Details

Special Repair For Non Residential Building Of Civil Hospital In Sector 22 , And Civil Dispensary 26 , 33 And Dhanas Chandigarh For The Year 2020-21 .

Key Value

Document Fees
Refer document
EMD
INR 27956.0 /-
Tender Value
Refer document

BOQ Items

Name of Work: SPECIAL REPAIR FOR NON RESIDENTIAL BUILDING OF CIVIL HOSPITAL IN SECTOR 22, & CIVIL DISPENSARIES 26, 33 & DHANAS CHANDIGARH FOR THE YEAR 2020-21.
Sl. No. Item Description Item Code / Make Quantity Units
1 1 CARRIAGE OF MATERIALS DSR 1.0 BI01010001010000000000000515BI0100001144
2 1.01 By Mechanical Transport including loading,unloading and stacking DSR 1.1 BI01010001010000000000000515BI0100001145
3 1.02 Lime, moorum, building rubbish (lead upto 8km) DSR 1.1.1 BI01010001010000000000000515BI0100001146 70 Cum
4 2 Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5 m in width as well as 10 sqm on plan including getting out and disposal of excavated earth upto 50 m and lift upto 1.5 m, as directed by Engineer-in- Charge: DSR 2.1 BI01010001010000000000000515BI0100001147
5 2.01 All kinds of soil DSR 2.1.1 BI01010001010000000000000515BI0100001148 240 Sqm
6 3 Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: DSR 6.1 BI01010001010000000000000515BI0100001149
7 3.01 Cement mortar 1:6 (1 cement : 6 coarse sand) DSR 6.1.2 BI01010001010000000000000515BI0100001150 15 Cum
8 4 Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. DSR 10.25 BI01010001010000000000000515BI0100001151
9 4.01 In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works. DSR 10.25.2 BI01010001010000000000000515BI0100001152 225 Kg
10 5 Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete, on 20 mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand). 11.20 BI01010001010000000000000515BI0100001153
11 5.01 Dark shade pigment using ordinary cement DSR 11.20.3 BI01010001010000000000000515BI0100001154 15 Sqm
12 6 Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) : DSR 11.26 BI01010001010000000000000515BI0100001155
13 6.01 25 mm thick DSR 11.26.1 BI01010001010000000000000515BI0100001156 15 Sqm
14 7 Regrading terracing of mud phaska covered with tiles or brick, in cement mortar by dismantling tiles or bricks, removing mud plaster, preparing the surface of mud phaska to proper slope, relaying mud plaster gobri leaping and tiles or bricks, grouted in cement mortar 1:3 (1 cement : 3 fine sand), including replacing unserviceable tiles or bricks with new ones and disposal of unserviceable material to the dumping ground (the cost of the new tiles or brick excluded), all complete as per direction of Engineer-in-Charge. DSR 14.13 BI01010001010000000000000515BI0100001157 450 Sqm
15 8 Providing and fixing double scaffolding system (cup lock type) on the exterior side, up to seven story height made with 40 mm dia M.S. tube 1.5 m centre to centre, horizontal & vertical tubes joining with cup & lock system with M.S. tubes, M.S. tube challies, M.S. clamps and M.S. staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it there after .The scaffolding system shall be stiffened with bracings, runners, connection with the building etc wherever required for inspection of work at required locations with essential safety features for the workmen etc. complete as per directions and approval of Engineerin- charge .The elevational area of the scaffolding shall be measured for payment purpose .The payment will be made once irrespective of duration of scaffolding.Note: - This item to be used for maintenance work judicially, necessary deduction for scaffolding in the existing item to be done. DSR 14.72 BI01010001010000000000000515BI0100001158 100 Sqm
16 9 Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. DSR 15.23 BI01010001010000000000000515BI0100001159
17 9.01 For thickness of tiles 10 mm to 25 mm DSR 15.23.1 BI01010001010000000000000515BI0100001160 90 Sqm
18 10 Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately): DSR 21.1 BI01010001010000000000000515BI0100001161
19 10.01 For fixed portion DSR 21.1.1 BI01010001010000000000000515BI0100001162
20 10.02 Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) DSR 21.1.1.1 BI01010001010000000000000515BI0100001163 150 Kg
21 11 Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately): DSR 21.1 BI01010001010000000000000515BI0100001164
22 11.01 For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) DSR 21.1.2 BI01010001010000000000000515BI0100001165
23 11.02 Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) DSR 21.1.2.1 BI01010001010000000000000515BI0100001166 50 Kg
24 12 Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of Engineer-in-charge. DSR 21.2 BI01010001010000000000000515BI0100001167
25 12.01 Pre-laminated particle board with decorative lamination on both sides DSR 21.2.2 BI01010001010000000000000515BI0100001168 15 Sqm
26 13 Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): DSR 21.3 BI01010001010000000000000515BI0100001169
27 13.01 With float glass panes of 4.0 mm thickness (weight not less than 10 kg/ sqm) DSR 21.3.1 BI01010001010000000000000515BI0100001170 15 Sqm
28 14 Repairing of existing pavers settled on Ground by filling the sand to meet with adjoining pavers complete in all respect to the entire satisfaction of the engineer incharge. NS BI01010001010000000000000515BI0100001171 150 Sqm
29 15 Providing and fixing Ist quality ceramic glazed wall tiles (size 300mm x 600mm) conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete NS BI01010001010000000000000515BI0100001172 200 Sqm
30 16 Dismentling of ceramic tiles carefully and scraping the plaster to making the surface for refixing the glazed tiles including removing of malba complete in all respect. NS BI01010001010000000000000515BI0100001173 200 Sqm
31 17 Providing and laying (Double Charge of Size 600 x 600mm) vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete. NS BI01010001010000000000000515BI0100001174 85 Sqm
32 18 Providing and fixing 15 to 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. NS BI01010001010000000000000515BI0100001175
33 18.01 Granite of any colour and shade BI01010001010000000000000515BI0100001176
34 18.02 Area of slab over 0.50 sqm (Based On DSR No. 8.2.2.2) BI01010001010000000000000515BI0100001177 15 Sqm
35 19 Providing and fixing 35mm thick ISI marked flush door shutters with iron butt hinges (heavy weight)125x40x4mm and screws, conforming to IS: 2202 (Part I) non-decorative type, core of block board. The rate further rate includes the cost of aluminium fittings such as one no. 250x16mm sliding bolt, one no. 200x10mm and one no. 150x10mm tower bolt, two nos. 125mm size D-type handles and painting the shutter with two coats of special quality paint over one coat of primer including preparation of plywood surface for painting complete in all respects and to the entire satisfaction of Engineer-in-charges. NS BI01010001010000000000000515BI0100001178 30 Sqm
36 20 Providing and fixing 35 mm thick Golden Champ (kiln seasones) glazed window shutter with 75mm thick wide styles and top and bottom rails. the rate includes the cost of 4mm glass panes fixed with 3/4'' x 3/4'' Hollock wood corner beading 2 Nos. Aluminium belt and Aluminium D-type handle 4" size the window shutter to be painted with two coats of special quality paint over one coat of primer complete in all respect and to the entire satisfaction of Engineer-in-charge. NS BI01010001010000000000000515BI0100001179 15 Sqm
37 21 Providing and fixing 35 mm thick Golden Champ wire gauge window shutter with style and 75mm thick wide rails and 12 x 22 gauge wire mesh fixed with 1/2'' x 3/4'' corner beading and including the 2 Nos. of 4'' iron hinges ISI marked aluminium, tower bolt handle etc. The rate also including two coats of special qualtiy paint over one coat of primer complete in complete in all respect and to the entire satisfaction of Engineer-in-charge. NS BI01010001010000000000000515BI0100001180 15 Sqm
38 22 Providing and fixing Golden Champ chawkhats (kiln seasoned) including cost of straps iron holds fast hinges, screws, nails, fevicol etc. and painting two coats of wood preserver to sides of chawkhats. Rate includes the cost of dismantling of all damages chawkhats and making and good the damaged to walls plaster and floors as required including disposal of rubbish to the dumping ground the rate further includes the cost of painting two coats syn, paint over one coat of wood primer complete in all respect and to the entire satisfaction of Engineer-in-charge NS BI01010001010000000000000515BI0100001181
39 22.01 4 ½”x 2 ¼ ” BI01010001010000000000000515BI0100001182 25 Rmt
40 23 Providing and fixing Trapozonal corrugated coloured coated sheet of any colour with Width of 1.06 Meter and thickness 0.50mm to be fixed over the existing with the help of necessary J-hooks complete in all respect and to the entire satisfaction of Engineer-in-charge. NS BI01010001010000000000000515BI0100001183 50 Sqm
41 24 Providing and fixing 6mm thick polycarbonate sheet fixed on existing angle iron frame structure with the help of using self drilling/self tapping screws of size 5.5 x55mm with EPDM seal complete in all respects as and to the entire satisfaction of the Engineer-in-charge. NS BI01010001010000000000000515BI0100001184 30 Sqm
42 25 Providing and fixing IRC fabric of size 1”x 1”x 10 gauge frame with M.S. angle 40 x 40 x6mm, M.S Flat 20 mm x 3mm size including cutting, welding etc. Complete in all respect and to the entire satisfaction Engineer in charge. NS BI01010001010000000000000515BI0100001185 65 Sqm
43 26 Providing and laying 60mm thick factory made cement concrete interlocking paver block of M-30 grade made by blcok making machine with wtrong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and inclduing 25mm thick compacted of corase sand, filling the joints with fine sand etc. all complete as per the direction of Engineer in charge N.S. BI01010001010000000000000515BI0100001186 240 Sqm
44 27 Providing and laying spreading and compacting Granular Sub-Base material 150mm thick compacted layer (by taking material 1.92 cum for 10 sqm area) of natural sand, morrum, gravel crushed stone or combination thereof as per MORT&H (5th revision) specification, confirming to clause 401 coarse graded grading-III as per table 400-1 of MOR&H specification, including spreading on the prepared sub grade with the help of motor grader or adequate capacity maintaining the required slope and grade during operation, rolling with road roller 8-10 tone with the grade and cross fall (camber) to be checked and any high spot or depressing which becomes apparent, corrected by removing or adding fresh material, including cost of tools and plants, carriage of material from stacks, templated, barrier, lighting arrangement at night, chowkidar and maintenance of diversion etc. complete in all respect as per MORT&H specifications, density of GSB as laid 2gms/ cc & to the entire satisfaction of Engineer-in-charge. NS BI01010001010000000000000515BI0100001187 37 Cum
45 28 Recovery of Doors @ 300/- Nos. NS BI01010001010000000000000515BI0100001188
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail