}

Repair And Maintenance Of Em Assets At Af Stn Jodhpur Under Age Em Of Ge Af No 2 Jodhpur, GE (AF) NO 2 JODHPUR-Rajasthan

Military Engineer Services-MES has published Repair And Maintenance Of Em Assets At Af Stn Jodhpur Under Age Em Of Ge Af No 2 Jodhpur. Submission Date for this Tender is 21-12-2020. Electromechanical Work Tenders in GE (AF) NO 2 JODHPUR Rajasthan. Bidders can get complete Tender details and download the document.




Tender Notice

26104397
Corrigendum : Repair And Maintenance Of Em Assets At Af Stn Jodhpur Under Age Em Of Ge Af No 2 Jodhpur
Open Tender
Indian
Rajasthan
GE (AF) NO 2 JODHPUR
21-12-2020

Tender Details

Repair And Maintenance Of Em Assets At Af Stn Jodhpur Under Age Em Of Ge Af No 2 Jodhpur

Corrigendum Details

Sr No CorrigendumDate Corrignedum CorrigendumType NewSubmissionDate
1 03-Dec-2020 Add Revised BOQ BOQ 14-12-2020
2 14-Dec-2020 Bid Auto Extn Corrigendum Bid Auto Extn Corrigendum 21-12-2020

Key Value

Document Fees
INR 500 /-
EMD
INR 60000.0 /-
Tender Value
INR 30 Lakhs /-

BOQ Items

Name of Work : REPAIR AND MAINT OF E/M ASSESTS AT AFS JODHPUR UNDER AGE E/M OF GE (AF) NO.2 JODHPUR
Sl. No. Item Description Item Code / Make Quantity Units
1 1 M&L for disconnecting, taking down and refixing the same after repair the geyser of any cap including striping, utting the existing copper inner tank after welding, brazing and tightening the hold fast ,nuts, bolts, washers, Heating element,thermostat, safety valve,base assembly, inlet tank, bottom cover etc complete and including making good to disturbed existing surface with plastering all as dircted by Engr-in-Charge 200 Each
2 2 Supply only Heating element of Geysers of 1.5 KW rating required at site including rubber washers. \nMake – Theeta/ Recold/Bajaj (ISI Marked) 150 Each
3 3 All as per srl item No 2 above but 2 KW ordinary size 20 Each
4 4 All as per srl item No 2 above but 2 KW roundal type 9 hole as per sample 20 Each
5 5 Supply only thermostat for the Geyser of 25 ltr capacity ISI marked 150 Each
6 6 All as per srl item No 5 above but 50 ltr capacity ISI marked 40 Each
7 7 Supply only base assembly complete with inlet, outlet and thermostat pipe with drain plug and screw for fixing the element inclusive of clamps for holding the element with nut and bolts, washer all as directed by EIC for Geyser of capacity 25 litre 200 Each
8 8 All as per srl item No. 7 above but for cap 50 ltr complete ISI marked 40 Each
9 9 Supply only GM non return valve 15mm dia and connecting up complete ISI marked 50 Each
10 10 All as per item No 9 but size 20 mm dia complete ISI marked 50 Each
11 11 Supply only safety valve/high pressure release valve for Geyser of 25 Litres capacity ISI marked 50 Each
12 12 All as per item No 11 above but for cap 50 ltr complete ISI marked 20 Each
13 13 Supply only PVC heavy duty hot type connecting pieces nylon braided with brass adopters 600 mm/450 mm long and fixing in position suitable for Geyser of 25/50 Litre capacity 50 Each
14 14 Supply only copper connection heavy duty hot type connecting with 02 Nos brass adopters and washer of size 600 mm/450 mm long and fixing in position suitable for geyser of 25/50 litre capacity 50 Each
15 15 Supply only pvc sheathe copper conductor multistranded cable ISI Marked 03 core PVC insulated of size 2.5 sqmm . 50 RM
16 16 Supply only plug top 3 pin 15 Amps ISI marked. 50 Each
17 17 M&L for fusible plug suitable for 95 to 100 degree centigrade fix in brass socket for any capacity for 25/50 litre all as directed 50 Each
18 18 Supply and fixing industrial type socket plug top including 3 Core x 2.5 Sqmm copper multi stranded 1.5m long including necessary connection all as directed by EIC. 50 Each
19 19 Supply only 02 Nos of bottom cover suitable for any type/any size of Geyser. 50 Each
20 20 Supply only geyser inlet tank made out of heavy duty copper body of capacity for \n25 Litres. 10 Each
21 21 All as per item No 20. above capacity for 50 Litres. 10 Each
22 22 Supply only rubber ring for geyser 9 holes at site/MES store yard. 50 Each
23 23 Supply only rubber ring for geyser round type at site/MES store yard. 50 Each
24 24 Supply only geyser indicator lamp square type/round type 50 Each
25 25 Supply only geyser glass wool stranded capacity for 25/50 Ltrs 5 KG
26 26 M&L for taking down ceiling fan and refixing the same after repair including striping, cutting the existing copper winding of ceiling fans, rewinding with new heavy duty super enameled copper wire of appropriate gauge (Make-Devi Dayal/ SWAN /CHETAK/MUKATI/USHA with insulation material, varnishing, oiling, greasing, painting in white/grey colour with synthetic enamel paint, replacement of unserviceable other parts like clamps, nut, bolt, washer and locking arrangement, rubber reel, flexible wire, canopy, shaft, capacitor etc. testing complete all as specified and directed by Engineer-in Charge of the following sizes of ceiling fans of make - Usha, Orient, Bajaj, Crompton, Cool Home, Kessles etc.Note:- Replacement of unserviceable other parts like clamps, nut, bolt, washer and locking arrangement, rubber reel, flexible wire, canopy, shaft, capacitor etc. shall be measured & paid for separately as “supply only”.
27 26.01 1200/1400 mm (48"/56") sweep. 500 EACH
28 27 All as per item No. 26 above but exhaust fans of following sizes:-230/300/400mm (9"/12")/12 sweep 200 EACH
29 28 Supply only Gun metal bush of ceiling fans any type of any sweep including cutting of grooves for fixing of bearing instead of bush any type/any size. 200 EACH
30 29 Supply only ball bearing of 1200 mm (48") sweep make: NBC/SKF/National suitable for ceiling fan. 400 EACH
31 30 Supply only ball bearing of make: NBC/SKF/National any sweep suitable for exhaust fans/pedestal fans of any make & size. 100 EACH
32 31 Supply only oil type condenser of Usha/Bajaj/Unistar Make, 230 volts AC including necessary soldering of capacity 2.5 MFD. 500 EACH
33 32 All as per item No.30 above but capacity 4 MFD for exhaust fans/pedestal fans.Make: Jamco/GEC/Crompton 200 EACH
34 33 M & L Rewinding of exhaust fan motor with copper winding & fixing. ISI marked suitable for existing size all as directed by Engineer-in-charge .Make CG/bajaj/Usha 150 Each
35 34 M & L Rewinding of Ceiling fan with copper winding & fixing. ISI marked suitable for existing size all as directed by Engineer-in-charge .Make CG/bajaj/Usha 400 Each
36 35 Supply only exhaust fan Blade ISI marked suitable for existing size all as directed by Engineer-in-charge .Make CG/bajaj/Usha 50 Each
37 36 M & L painting of ceiling/exhaust fan necessary as per complete synthetic enamel paint by spraying including filling cavities with filler one coat after cleaning all dust and fixing in situ all complete fixing electrical connection by copper cable 23/0.0076 as directed by EIC. 150 EACH
38 37 Taking down Sub main wiring/ service connection any type / any size including pipe and all connecting accessories. 500 RM
39 38 Taking down DB with MCB any type & single pole neutral enclosure with two pin and earth plug with MCB including all connecting accessories. 30 Each
40 39 Taking down Light fittings, building secuirtity lights, gate lights, garden lights , flood lights including all connecting accessories. 272 Each
41 40 Taking down carefully aluminium/copper point wiring (light ,fan, socket or power)complete, including fittings & fixtures such as switches, ceiling roses, pendents, regulators, sockets,bell push,bell,light fittings etc.removing materials to store for keeping in safe costudy or for taking credit (credit for shall be made as per Sch of credit) and making good disturbed surface of walls, floors etc. to match to the existing surfaces. 660 Per Point
42 41 S&F sub main wiring with two runs of PVC insulated but unsheathed multi stranded copper conductor FRLS cable 4 Sqmm 1100 volt grade drawn through in and including non metallic PVC conduit of size 20 mm dia (external) with wall thickness not less than 1.8 mm, ISI marked concealed in wall including accessories like bends, tees junction boxes, etc fixed on wall or ceiling etc. including 2.5 sqmm PVC insulated but unsheathed multi stranded copper conductor FRLS cable 1100 volt grade as earth wire complete including repair / replacement of existing conduit size of clamps , screw saddle with base complete all fixing accessories all as directed by EIC and making good all disturbed surfaces to match with the existing surface. 250 RM
43 42 S&F sub main wiring with two runs of PVC insulated but unsheathed multi stranded copper conductor FRLS cable 2.5 Sqmm 1100 volt grade drawn through in and including non metallic PVC conduit of size 20 mm dia (external) with wall thickness not less than 1.8 mm, ISI marked concealed in wall including accessories like bends, tees junction boxes, etc fixed on wall or ceiling etc. including 1.5 sqmm PVC insulated but unsheathed multi stranded copper conductor FRLS cable 1100 volt grade as earth wire complete including repair / replacement of existing conduit size of clamps , screw saddle with base complete all fixing accessories all as directed by EIC and making good all disturbed surfaces to match with the existing surface. 250 RM
44 43 M&L for point wiring with 1100 volts grade PVC insulated FRLS multistranded copper conductor cable 1.5 sqmm (Phase - Red, Neutral - Black) and earth continuity conductor 1.5 sqmm (Green) drawn into and including concealed rigid non metallic PVC conduit medium grade not less than 20 mm dia ISI marked ivory colour with all conduit fittings / fixing accessories and unwelded sunken galvanized pressed steel terminal boxes of thickness not less than 1.2 mm covered with 3 mm thick phenolic laminated white sheet cover for mounting switches, sockets, fan regulators One light point controlled by one switch complete all as specified and directed by Engineer in Charge.
45 43.01 One light/fan point controlled by one way switch. 300 Per Point
46 43.02 One 3 pin 5or 6 Amps socket outlet on indipendent board with other switchs as directed. 100 Per Point
47 43.03 ditto- all as above but on the same board. 100 Per Point
48 43.04 One bell buzzer controlled by one push button in indipendent board . 40 Per Point
49 43.05 One light point controlled by two 2 way switches. 20 Per Point
50 44 M&L for point wiring with 2.5sqmm single core PVC insulated but unsheathed multi stranded copper conductor FRLS cable 1100 volts grade draw through in & including rigid MS conduit heavy duty concealed /surface conduit including conduit accessories like bends, tees junction boxes etc fixed on wall or ceilling etc including sunken type pressed steel terminal boxes of size 175 X 100 mm with 3 mm thick bakelite sheet cover white/coloured including 1.5 smm single core PVC insulated but unsheathed multi stranded copper conductor FRLS cable 1100 volts grade as earth continuity wire connected to main earth dolly, for one 3 pin 15 or 16 Amps socket outlet on independent board. 100 Per Point
51 45 S&F in repair switch piano, flush type 230 Volt 5 amps single pole one way ISI marked all specified 500 Each
52 46 S&F in repair switch piano, flush type 230 Volt 5 amps single pole two way ISI marked all specified 20 Each
53 47 S&F in repair socket outlet 2 in 1, 5 pin 5 or 6 amps flush type all as specified. 200 Each
54 48 S&F in repair switch piano flush type 15 amps single pole one way ISI marked all specified 100 Each
55 49 S&F in repair socket outlet 2 in 1, 6 pin 6 Amps cum 16 Amps flush type all as specified. 100 Each
56 50 S&F in repair Bell Push, flush type 5Amps 240 volt ISI marked 20 Each
57 51 M&L in repair for ceiling rose surfaces bakelite 65 x 50mm white coloured 2 to 3 terminals 360 Each
58 52 S&F in repair electric Bell ding dong AC. 230volt single pole. 20 Each
59 53 S&F in repair angle holder, insulated polycabonate body with back plate complete. Make - Havells Reo / Anchor Penta PC / SSK as approved. 200 Each
60 54 Supply and fixing fan electronic regulator 300w step type all as specified and as directed by Engr-in-Charge. 100 Each
61 55 S&F MCB distribution board, powder coated, CRCA steel sheet, degree of protection IP 43 - IK 09 with reversible double door, recess mounted, having insulated 100 amp tinned copper bus bar, neutral busbar, earth bar, din bar, detachable gland plate, interconnection, earthing connection, blanking plates in unused spaces as required with SPN, 240 volts, 4 ways. Make - Make - Legrand /Havells or equivalent in Schneider or Hager as approved. 10 Each
62 56 S&F MCB distribution board, powder coated, CRCA steel sheet, degree of protection IP 43 - IK 09 with reversible double door, recess mounted, having insulated 100 amp tinned copper bus bar, neutral busbar, earth bar, din bar, detachable gland plate, interconnection, earthing connection, blanking plates in unused spaces as required with SPN, 240 volts, 8 ways. Make -Make - Legrand /Havells or equivalent in Schneider or Hager as approved. 10 Each
63 57 S&F MCB distribution board, powder coated, CRCA steel sheet, degree of protection IP 43 - IK 09 with reversible double door, recess mounted, having insulated 100 amp tinned copper bus bar, neutral busbar, earth bar, din bar, detachable gland plate, interconnection, earthing connection, blanking plates in unused spaces as required with TPN, 415 volts, 4 ways. Make - Legrand /Havells or equivalent in Schneider or Hager as approved. 2 Each
64 58 S&F MCB distribution board, powder coated, CRCA steel sheet, degree of protection IP 43 - IK 09 with reversible double door, recess mounted, having insulated 100 amp tinned copper bus bar, neutral busbar, earth bar, din bar, detachable gland plate, interconnection, earthing connection, blanking plates in unused spaces as required with TPN, 415 volts, 8 ways. Make - Make - Legrand /Havells or equivalent in Schneider or Hager as approved. 8 Each
65 59 S&F in repair MCBs of 'C' series having breaking capacity 10 KA, ISI marked including required wiring connections with copper lugs of suitable size provided in MCB DBs of Single pole 6 to 32 amp. Make Legrand or equivalent model of Hyger/siemens. 150 Each
66 60 S&F in repair MCBs of 'C' series having breaking capacity 10 KA, ISI marked including required wiring connections with copper lugs of suitable size provided in MCB DBs of SPN 40 amp. Make Legrand or equivalent model of Hyger/siemens. 30 Each
67 61 S&F in repair MCBs of 'C' series having breaking capacity 10 KA, ISI marked including required wiring connections with copper lugs of suitable size provided in MCB DBs of DP 32A amp. Make Legrand or equivalent model of Hyger/siemens. 20 Each
68 62 S&F in repair MCBs of 'C' series having breaking capacity 10 KA, ISI marked including required wiring connections with copper lugs of suitable size provided in MCB DBs of TP 63 amp.Make Legrand or equivalent model of Hyger/siemens. 20 Each
69 63 S&F in repair MCBs of 'C' series having breaking capacity 10 KA, ISI marked including required wiring connections with copper lugs of suitable size provided in MCB DBs of TPN 63 amp. Make Legrand or equivalent model of Hyger/siemens. 20 Each
70 64 S&F in repair MCBs of 'C' series having breaking capacity 10 KA, ISI marked including required wiring connections with copper lugs of suitable size provided in MCB DBs of Four pole 63 amp. Make Legrand or equivalent model of Hyger/siemens. 15 Each
71 65 S&F in repair MCBs of 'C' series having breaking capacity 10 KA, ISI marked including required wiring connections with copper lugs of suitable size provided in MCB DBs of Four pole 100 amp. Make Legrand or equivalent model of Hyger/siemens. 15 Each
72 66 S&F in repair energy efficient recessed mounted LED luminaire suitable for 2'x2' grid ceiling with flat diffuser and lumen output of 3300 lumens having constant current electronic driver duly connected with 0.5 sqmm white colour PVC insulated & sheathed three core flexible multi stranded copper conductor cable in renewal of any type luminaire as required. Make - crompton cat ref no. LCTLR-36-FO-CDL or equivalent in Wipro or philips as approved. 50 Each
73 67 S&F in repair recessed mounted LED luminaire suitable for 1'x 4' grid ceiling light with high performance , commercial grade solution suitable for hospitals, school, officers and so much Make - crompton cat ref no. LCTLSN - 40-CDL(1X4) equivalent in Wipro or philips as approved. 50 Each
74 68 S&F in repair LED Stud Bulk Head 10 watt fixture perfect interior and exterier application within car parks, walkway,stairwells, carridoers,local authorities and housing accosiation as well as commercial buildingincluding connection all as per cat ref no. LBHP-10-CDL complete all as specified and directed by Engineer in Charge. Make -Philips or equivalent CG/ Havells 50 Each
75 69 S&F in repair Building Security LED 25 Watt fixture made of pressure die cast housing with toughened glass and high power LEDs with option of secondary optic with IP65 protection ,commercial buildingincluding connection all as per cat ref no. LSTS-25-CDL-M complete all as specified and directed by Engineer in Charge. Make -Philips or equivalent CG/ Havells S&F in repair Building Security LED 25 Watt fixture made of pressure die cast housing with toughened glass and high power LEDs with option of secondary optic with IP65 protection ,commercial buildingincluding connection all as per cat ref no. LSTS-25-CDL-M complete all as specified and directed by Engineer in Charge. Make -Philips or equivalent CG/ Havells 30 Each
76 70 S & F in repair fix Building security light 60W pressure die cast aluminium housing with heat resistant toughned glass and IP66 protection including connected accessories complete all as directed by Engr-in -Charge Make : Bajaj, or equivalent in Philips /CG 20 Each
77 71 S&F in repair Post Top 20 Watt Heritage IP65 rated ideal to lit up parks,garden ways and heritage sites. including connection all as per cat ref no. LPTH-20-CDL complete all as specified and directed by Engineer in Charge. Make -Philips or equivalent CG/ Havells 15 Each
78 72 Supply and fixing integral LED decorative Post top for 360 degree indirect light with IP 65 protection Resistant to impact and corrosion Glare-free and batter uniformity complete all s specified and as directed by engr-in-charge cat part No LPTO-40-CDL Make :Crompton 15 Each
79 73 Supply and fixing Decorative indirect post top for Garden & Landscape lightning with IP 65 protection Resistant to impact and corrosion Glare-free and batter uniformitydistribution complete all s specified and as directed by engr-in-charge cat part No LPTOI-45-CDL Make :Crompton 25 Each
80 74 Taking down old unsv flood lights Supply and fixing in repair LED Flood Light 150 Watt maded up pressure dia cast aluminium housing with toughened glass and high powder LEDs secondary lenses with IP-65 Protection system efficiency not less than 110LPW option for 3000K 10 KV SPD included complete all as specified and as directed Make Crompton cat part No LFLN-150-CDL/60-M 17 Each
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail