Tamil Nadu Transmission Corporation Limited-TANTRANSCO has published Supply Fab . Erection Of Sse Structures , Earthing And Providing Concrete Road , Cable Duct And Protection Wall For Introduction Of 110/11 Kv Ratio With 1X16 Mva 110/11 Kv Prtr By Dismantling The Existing 2 X 8 Mva 33/11 Kv Prtr At Thingalur 110 Kvss. Submission Date for this Tender is 01-12-2020. Electrification Work Tenders in Coimbatore Tamil Nadu. Bidders can get complete Tender details and download the document.
| Name of the work : Supply, Fabrication, erection of Sub-Station structures and erection of Sub-Station auxiliaries and earthing system and providing concrete road, cable duct and protection wall for introduction of 110/11 KV ratio with 1x16 MVA 110/11 KV Power Transformer by dismantling the existing 2x8 MVA 33/11 KV Power Transformer at the existing Thingalur 110/33/11 KV Sub-Station. | |||||
|---|---|---|---|---|---|
| Sl. No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Dismantling the existing PCC Plinth concrete and disposed away as per direction of Engineer at site including cost of all labour, lead, lift etc., complete | Item Code / 1 | 59 | M3 |
| 2 | 2 | Dismantling Brick Masonry in cement mortar walls under 3m high and disposed away from the site as per direction of Engineer at site including cost of labour, lead, lift etc., complete | Item Code / 2 | 10 | M3 |
| 3 | 3 | Earthwork excavation for Cutting the Existing yard to the 110KV yard level and depositing on bank with initial lead of 10 m and initial lift of 2 m in Hard stiff clay Stiff black cotton soil, hard red earth, shales, murram, gravel, stoney earth and earth mixed with small size boulders as per standard Specification as directed by the Engineer at site.for levelling | Item Code / 3 | 556 | M3 |
| 4 | 4 | Earth work excavation for foundation in HGS and and depositing on bank with initial lead of 10 m and initial lift of 2 m in Hard stiff clay Stiff black cotton soil, hard red earth, shales, murram, gravel, stoney earth and earth mixed with small size boulders as per standard Specification as directed by the Engineer at site. | Item Code / 4 | 52 | M3 |
| 5 | 5 | Earth work excavating for foundation and depositing on bank with initial lead of 10m and initial lift of 2 m in soft disintegrated rock, laterite, soft rock (or) kankar not requiring blasting as per standard Specification as directed by the Engineer at site. | Item Code / 5 | 65 | M3 |
| 6 | 6 | Earth work excavation for Foundation in Hard rock by Wedging and Chiseling and trimming to proper shape where blasting is prohibited and stacking for measurements including all leads, lifts etc., as per standard specification and as per instruction of the Engineer at site. | Item Code / 6 | 13 | M3 |
| 7 | 7 | Filling the foundation with M Sand including cost of M.sand, filling charges as per standard specification(watering & consolidation with all leads and lifts etc., complete. | Item Code / 7 | 23 | M3 |
| 8 | 8 | Plain cement concrete in CC 1:3:6, using 20mm HBG metal, including cost of cement, all materials, labour charges including consolidation, curing, all leads, lifts, as per standard specification etc., complete. | Item Code / 8 | 49.2 | M3 |
| 9 | 9 | PCC 1:2:4 mix using 20mm HB stone machine crushed metal including cost of all labour, materials, lead, lift, curing, etc., complete. | Item Code / 9 | 82 | M3 |
| 10 | 10 | Providing steel form box for various concrete works including cost of steel strutting with cost of all materials,labour , lead, lift etc., complete as per standard specifications as directed by the Engineer in charge at site. | Item Code / 10 | 135 | M2 |
| 11 | 11 | Re-Filling with Excavated Earth including cost of all Labour, lead, lfit etc., complete. | Item Code / 11 | 56 | M3 |
| 12 | 12 | Disposal of surplus earth with a lead of 100 Mts including spreading and levelling labour, lead, lift as per standard specification, etc., complete. | Item Code / 12 | 13 | M3 |
| 13 | 13 | Brick work in C.M 1:5 using chamber burnt class II bricks, including, cost of cement, all materials, labour, curing, leads and lifts, etc complete as per Standard Specification. | Item Code / 13 | 21 | M3 |
| 14 | 14 | Reinforced Cement concrete in C.C. 1:1½:3 mix, using 12 to 20mm HBG machine crushed metal including cost of cement, all materials, labour, curing, leads and lifts vibrating charges as per standard specification, etc., complete. but excluding cost of steel reinforcement. | Item Code / 14 | 52 | M3 |
| 15 | 15 | Reinforced Cement concrete in C.C. 1:1½:3 mix, using 12 to 20mm HBG machine crushed metal for CABLE DUCT COVER SLAB including cost of steel shuttering, cement, all materials, labour, curing, leads and lifts vibrating charges as per standard specification, etc., complete. but excluding cost of steel reinforcement. | Item Code / 15 | 6 | M3 |
| 16 | 16 | Providing steel reinforcement MS/RTS rods for reinforced concrete works, including cost of MS/RTS rods, binding wire, labour charges for cutting, straightening bending as per type design drawing, placing aligning, and tying properly with all leads and lift as per standard specification, etc., complete. | Item Code / 16 | 3500 | Kg |
| 17 | 17 | Plastering with CM 1:3, 12mm thick, including cost of cement, labour, curing, all leads and lifts as per standard specification, etc., complete. | Item Code / 17 | 323 | M2 |
| 18 | 18 | Colour washing with two coats using ready mixed Weather Proof Exterior Emulsion (First quality - Apex or its equivalent) of approved quality and colour over a coat of exterior emulsion water based primer for exterior surfaces including thorough scrapping, clean removal of dirt, cost of all materials, scaffolding, Labour, Lead, Lift etc., complete and including necessary crack filling paste, putty whereever required. | Item Code / 18 | 387 | M2 |
| 19 | 19 | Supply & Fixing of GI angle to required length keeping in required alignment and level in yard cable duct fixing at 600mm C/c including cost of angle, Galvanisation charges, labour, lead, lift etc., complete. | Item Code / 19 | 155 | Nos |
| 20 | 20 | Labour charges for Transporting of all cable duct cover slab from curing to duct keeping them alignment and fixing them in position including lead, lift, labour etc., complete. | Item Code / 20 | 250 | Nos |
| 21 | 21 | Supplying and fixing readymade earth collars of size 45 cm inner dia with 30 cm height and shell thickness of 40 mm including cost of all materials,transport to site , labour, lead, lift, etc., complete., as per standard specification. | Item Code / 21 | 10 | Nos |
| 22 | 22 | Supplying, fixing, laying and testing of 25mm dia PVC pipe 10kg/cm2 pressure of approved good Quality ISI make for earth pit including cost of pipe, GI specials, all materials, lead, lift, etc., complete, as per standard specification. | Item Code / 22 | 50 | Rm |
| 23 | 23 | Supplying and fixing, laying and testing of 40mm dia PVC pipe 10kg/cm2 pressure of approved good Quality ISI make for earth pit main line including cost of pipe, GI specials, all materials, lead, lift, etc., complete, as per standard specification. | Item Code / 23 | 50 | Rm |
| 24 | 24 | Supplying & fixing of GM Gate Valve 25mm with ISI make for PVC water Supply arrangements including cost of Pipe, Bend, Tee, l - Bow, reducer etc., as required of all mateials, lead, lift , Labour charges ete. Complete. | Item Code / 24 | 2 | No |
| 25 | 25 | Supplying & fixing of GM Gate Valve 40mm with ISI make for PVC water Supply arrangements including cost of Pipe, Bend, Tee, l - Bow, reducer etc., as required of all mateials, lead, lift , Labour charges ete. Complete. | Item Code / 25 | 2 | No |
| 26 | 26 | Providing fixing 12mm screw down bib cock etc complete including cost of cement, all materials, labour, curing, all leads, and lifts, etc., complete.as per standard specification | Item Code / 26 | 30 | No |
| 27 | 27 | Supplying and spreading of 20 mm metal to a thickness of 100mm over the quarry dust of 100 mm thickness layer inside the yard including cost of all materials, labour charges , all leads, lifts, as per standard specification etc., complete. | Item Code / 27 | 500 | M2 |
| 28 | 28 | Providing expansion joint for road concrete at same intervals of 5 m in both direction using prevalid aspheltics pad 15 mm thick to full width and plastering with CM 1:3, 12 mm thick including cost of cement, all materials, labour, curing, all leads, and lifts, etc., complete.as per standard specification. | Item Code / 28 | 53 | Rm |
| 29 | 29 | Supply of RS Joist 250x125 mm ISMB from approved vendors of SAIL, Tata,Jindal,RINL, Essar steel,Jindal steel and Power ltd.JSW steel, Tulsyan NEC ltd and Prakash Ferrous Industries PVT Ltd, Noble tech and as per IS 2062 and latest issue. | Item Code / 29 | 3.73 | MT |
| 30 | 30 | Supply of RS Joist 200x100 mm ISMB from approved vendors of SAIL, Tata, Jindal,RINL,Essar steel,Jindal steel and Power ltd.JSW steel, Tulsyan NEC ltd and Prakash Ferrous Industries PVT Ltd, Noble tech and as per IS 2062 and latest issue. | Item Code / 30 | 3.82 | MT |
| 31 | 31 | Supply of MS Channel 125 X 65 mm from approved vendors of SAIL,Tata, Jindal,RINL, Essar steel,Jindal steel and Power ltd.JSW steel, Tulsyan NEC ltd and Prakash Ferrous Industries PVT Ltd, Noble tech and as per IS 2062 and latest issue. | Item Code / 31 | 0.82 | MT |
| 32 | 32 | Supply of MS Channel 100 X 50 mm ISMB from approved vendors of SAIL,Tata, Jindal,RINL, Essar steel,Jindal steel and Power ltd.JSW steel, Tulsyan NEC ltd and Prakash Ferrous Industries PVT Ltd, Noble tech and as per IS 2062 and latest issue. | Item Code / 32 | 1.56 | MT |
| 33 | 33 | Supply of MS Angle 100 X 100 X 8mm ISMB from approved vendors of SAIL,Tata, Jindal,RINL, Essar steel,Jindal steel and Power ltd.JSW steel, Tulsyan NEC ltd and Prakash Ferrous Industries PVT Ltd, Noble tech and as per IS 2062 and latest issue. | Item Code / 33 | 0.44 | MT |
| 34 | 34 | Supply of MS Angle 65 X 65 X 6mm from approved vendors of SAIL,Tata, Jindal,RINL, Essar steel,Jindal steel and Power ltd.JSW steel, Tulsyan NEC ltd and Prakash Ferrous Industries PVT Ltd, Noble tech and as per IS 2062 and latest issue. | Item Code / 34 | 2.58 | MT |
| 35 | 35 | Supply of MS Angle 50 X 50 X 6mm from approved vendors of SAIL,Tata, Jindal, RINL, Essar steel,Jindal steel and Power ltd.JSW steel, Tulsyan NEC ltd and Prakash Ferrous Industries PVT Ltd, Noble tech and as per IS 2062 and latest issue. | Item Code / 35 | 0.85 | MT |
| 36 | 36 | Supply of MS Flat 65 X 10 mm from approved vendors of SAIL,Tata,Jindal,RINL, Essar steel,Jindal steel and Power ltd.JSW steel, Tulsyan NEC ltd and Prakash Ferrous Industries PVT Ltd, Noble tech and as per IS 2062 and latest issue. | Item Code / 36 | 3.09 | MT |
| 37 | 37 | Supply of MS Flat 50 X 6 mm from approved vendors of SAIL,Tata, Jindal,RINL, Essar steel,Jindal steel and Power ltd.JSW steel, Tulsyan NEC ltd and Prakash Ferrous Industries PVT Ltd, Noble tech and as per IS 2062 and latest issue. | Item Code / 37 | 2 | MT |
| 38 | 38 | Supply of MS Flat 25 X 3 mm from approved vendors of SAIL,Tata,Jindal,RINL, Essar steel,Jindal steel and Power ltd.JSW steel, Tulsyan NEC ltd and Prakash Ferrous Industries PVT Ltd, Noble tech and as per IS 2062 and latest issue. | Item Code / 38 | 0.1 | MT |
| 39 | 39 | Supply of Chequrred Plate 6 mm from approved vendors of SAIL,Tata, Jindal,RINL, Essar steel,Jindal steel and Power ltd.JSW steel, Tulsyan NEC ltd and Prakash Ferrous Industries PVT Ltd, Noble tech and as per IS 2062 and latest issue. | Item Code / 39 | 0.2 | MT |
| 40 | 40 | Supply of grouting bolt/eye bolt of 18 - 20 mm dia GI rod of required length including cost of GI rod and 2Nos GI nuts & washer as directed by the field Engineer. | Item Code / 40 | 12 | No |
| 41 | 41 | Supply and provision of M8,M9, M10,M12,&M 16 full thread GI bolt, nuts & GI washer of various size for erection of insulator or any other purpose wherever required and as directed by the field Engineer. | Item Code / 41 | 500 | kg |
| 42 | 42 | Labour for excavation & refilling of avg depth of 0.8m for earth mat | Item Code / 42 | 600 | M³ |
| 43 | 43 | Labour for machneries,consumables for erection of earth mat & earth raisers. (Electricity will be borne by department) | Item Code / 43 | 3.09 | MT |
| 44 | 44 | Labour machineries,consumables for earth raisers for equipments and structures. (Electricity will be borne by department) | Item Code / 44 | 2.1 | MT |
| 45 | 45 | Labour, Machineries, consumables for fabrication of structures as per the drawing issued by field engineer.Heavy section without length wise welded joints (Sectional weight 14Kg/Mtr and above) (Electricity supply will be borne by department) | Item Code / 45 | 7.55 | MT |
| 46 | 46 | Labour, Machineries, consumables for fabrication of structures as per the drawing issued by field engineer.Light section with joints wherever necessary (sectional weight below 14Kg/Mtr) (Electricity supply will be borne by department) | Item Code / 46 | 7.23 | MT |
| 47 | 47 | Labour charges for erection of structure Heavy section(sectional weight below 14Kg/m)structures as per the drawing issued by field engineer. | Item Code / 47 | 7.55 | MT |
| 48 | 48 | Labour charges for erection of structure Light section(sectional weight below 14Kg/m)structures as per the drawing issued by field engineer. | Item Code / 48 | 7.48 | MT |
| 49 | 49 | Supply of Paint including cost of paint, brush and consumables etc., Red Oxide paint | Item Code / 49 | 50 | Litre |
| 50 | 50 | Supply of Paint including cost of paint, brush and consumables etc., Aluminium paint | Item Code / 50 | 50 | Litre |
| 51 | 51 | Supply of Paint including cost of paint, brush and consumables etc., Enamel paint | Item Code / 51 | 15 | Litre |
| 52 | 52 | Painting of structures after proper surface preparation using appropraite machinery to remove rust/ scales etc.,One coat of Red oxid painting/ Primary coat of various structure | Item Code / 52 | 300 | M2 |
| 53 | 53 | Painting of structures after proper surface preparation using appropraite machinery to remove rust/ scales etc.,Two coats of aluminium Paint of various structure | Item Code / 53 | 300 | M2 |
| 54 | 54 | One coat enamal painting/Anti corrasive Painting of Chequrred plates, Equipment board, indentification of earth pit board and yard light pole, structure earthing, earth mat, earth pit, shoe paint and Iron and steel items as directed by the field engineer. | Item Code / 54 | 200 | M2 |
| 55 | 55 | Labour charges for writting details in Finished Surface boards including cost of enamal paint (Dulex,Asian,Berger preferred) and other Condsumables as directed by the field Engineer. | Item Code / 55 | 200 | Sq Ft |
| 56 | 56 | Labour charges for drawing layout and writing details/ Vinyl Printing in LC/ Key board including cost of enamel paint (Dulex, Asian, Berger preferred) and Other consumables as directed by the field Engineer. | Item Code / 56 | 30 | Sq Ft |
| 57 | 57 | Supply of PVC Stickers for Breakers, Panels, chargers and General key Boards as required and as directed by field Engineer, | Item Code / 57 | 30 | Sq Ft |
| 58 | 58 | Fixing of PVC Stickers for Breakers, Panels, chargers and General key Boards and other works etc., as required and directed by field Engineer, | Item Code / 58 | 30 | Sq Ft |
| 59 | 59 | Typing & Printing of commissioning report booklet & drawings including spiral binding works etc., | Item Code / 59 | 200 | Pages |
| 60 | 60 | Supply of reputed make long shackle 6lever Navtal lock with triplicate keys for AB switches and for any other purpose including the cost of ring and key token as directed by the field Engineer. | Item Code / 60 | 7 | Nos |
| 61 | 61 | Supply of Earth Spikes by using 40mm M.S. Rod & GI Earth pipe at a height of 3mts (40mm Dia, 3m length) | Item Code / 61 | 5 | No |
| 62 | 62 | Dismatling of Earth Spikes by using 40mm M.S. Rod & GI Earth pipe at a height of 3mts (40mm Dia, 3m length) | Item Code / 62 | 2 | No |
| 63 | 63 | Labour machineries, consumables For fabrication & erection of earth spikes without Materials including sharpening of Top portion & Galvanising, welding & Clipping the earthwire to earthmat / earthpit(Electricity supply will be borne by department) | Item Code / 63 | 5 | No |
| 64 | 64 | Labour for erection of Isolator / AB Switches without earth hand operated 110KV on higher elevation structure above 6mtr including gear arrangement | Item Code / 64 | 1 | No |
| 65 | 65 | Labour for erection of Isolator / AB Switches without earth hand operated 110KV on higher elevation structure above 6mtr including gear arrangement under LC condition | Item Code / 65 | 1 | No |
| 66 | 66 | Labour for erection of Isolator / AB Switches, including erection of insulators and alignment works etc., without earth hand operated 110KV | Item Code / 66 | 2 | No |
| 67 | 67 | Labour for erection of Isolator / AB Switches, including erection of insulators and alignment works etc., without earth hand operated 110KV under LC condition | Item Code / 67 | 1 | No |
| 68 | 68 | Labour for erection of single pole stack up right, under hang or suspension. 110KV | Item Code / 68 | 12 | Nos |
| 69 | 69 | Fabrication and fixing of bell mouth ,insertion of Jumper in the solid core/ PT Isulators and other consumables & as directed by the field Engineer (Electricity supply will be borne by department) | Item Code / 69 | 3 | Nos |
| 70 | 70 | Erection of strung bus Labour for stringing of strung bus including hoisting of insulator and erection of eye bolt and hardware fittings 110 KV Single Zebra (1Span of 3 Runs) | Item Code / 70 | 1 | Span |
| 71 | 71 | Dismantling of strung bus including hoisting of insulator and erection of eye bolt and hardware fittings 110 KV Single Zebra (1Span of 3 Runs) | Item Code / 71 | 1 | Span |
| 72 | 72 | Erection of strung bus Labour for strining of strung bus including hoisting of insulator and erection of eye bolt and hardware fittings 110 KV Single Zebra (1Span of 3 Runs)under LC condition | Item Code / 72 | 2 | Span |
| 73 | 73 | Labour for providing Droppers and jumpers Upto height of 6mts without making bends | Item Code / 73 | 30 | No |
| 74 | 74 | Labour for providing Droppers and jumpers Upto height of 6 mts (Extra 20% for LC work) | Item Code / 74 | 9 | No |
| 75 | 75 | Labour for providing Droppers and jumpers at a height of 6 mts to 10 mts | Item Code / 75 | 24 | No |
| 76 | 76 | Labour for providing Droppers and jumpers at a height of 6mts to 10 mts (Extra 20% for LC work) | Item Code / 76 | 48 | No |
| 77 | 77 | Labour for erection of bus bar Without making bends Using 75mm IPS Aluminium tube | Item Code / 77 | 81 | Mtr |
| 78 | 78 | Labour for erection of bus bar Without making bends Using 75mm IPS Aluminium tube under LC condition | Item Code / 78 | 54 | Mtr |
| 79 | 79 | Labour for erection of bus bar Without making bends Using 50 mm IPS Aluminium tube | Item Code / 79 | 54 | Mtr |
| 80 | 80 | Labour for erection of bus bar Without making bends Using 50 mm IPS Aluminium tube under LC condition | Item Code / 80 | 27 | Mtr |
| 81 | 81 | Supply of Power Connectors as per latest IS Code, Tension fitting Clamp 6 Bolted for Zebra | Item Code / 81 | 12 | Nos |
| 82 | 82 | Supply of Power Connectors as per latest IS Code, Switchend clamp for Single Zebra | Item Code / 82 | 24 | Nos |
| 83 | 83 | Supply of Power Connectors as per latest IS Code, Switch end Clamp for 3" busbar | Item Code / 83 | 12 | Nos |
| 84 | 84 | Supply of Power Connectors as per latest IS Code, 3"Busbar Expansion clamp | Item Code / 84 | 3 | Nos |
| 85 | 85 | Supply of Power Connectors as per latest IS Code, T Clamp for Zebra to Zebra | Item Code / 85 | 15 | Nos |
| 86 | 86 | Supply of Power Connectors as per latest IS Code, T clamp for 3" bus bar to Zebra | Item Code / 86 | 15 | Nos |
| 87 | 87 | Supply of the following Power Connectors as per latest IS Code, Free end Clamp for 3" busbar | Item Code / 87 | 9 | Nos |
| 88 | 88 | Supply of Power Connectors as per latest IS Code, Seating Clamp for 3" busbar | Item Code / 88 | 3 | Nos |
| 89 | 89 | Supply of Power Connectors as per latest IS Code, 3"Busbar Jointing clamp | Item Code / 89 | 3 | Nos |
| 90 | 90 | Supply of Power Connectors as per latest IS Code, Corana Bell 75mm | Item Code / 90 | 12 | Nos |
| 91 | 91 | Supply of Power Connectors as per latest IS Code, PG Clamp for Zebra to Zebra | Item Code / 91 | 24 | Nos |
| 92 | 92 | Supply of Power Connectors as per latest IS Code, Switch end Clamp for 2" busbar | Item Code / 92 | 3 | Nos |
| 93 | 93 | Supply of Power Connectors as per latest IS Code, T clamp for 2" bus bar to Zebra | Item Code / 93 | 18 | Nos |
| 94 | 94 | Supply of Power Connectors as per latest IS Code, Freeend clamp for 2"Busbar | Item Code / 94 | 15 | Nos |
| 95 | 95 | Supply of Power Connectors as per latest IS Code, Seating clamp for 2"Busbar | Item Code / 95 | 6 | Nos |
| 96 | 96 | Supply of Power Connectors as per latest IS Code, 2"Busbar Expansion clamp | Item Code / 96 | 3 | Nos |
| 97 | 97 | Supply of Power Connectors as per latest IS Code,Reducer clamp for 2"Bus to Zebra | Item Code / 97 | 3 | Nos |
| 98 | 98 | Supply of Power Connectors as per latest IS Code, Corana Bell 50mm | Item Code / 98 | 6 | Nos |
| 99 | 99 | Supply of ISI mark porcelain rewirable fuse unit of reputed make in panels, boxes for AC Circuits wherever required as directed by the field Engineer-16A | Item Code / 99 | 12 | No |
| 100 | 100 | Providing earth pit of 115 mm dia to a depth of 6 mtrs. labour for fabrication of earth electrode using M.S.rod 40 mm dia & insert electrode in to the bore and refilling with red soil and bentonite powder of 30 Kg.and other sundries. Identification board of size 300 X 150 mm 14 SWG. lettering and 12 mm M.S.Round rod to be fixed in the board as directed by the field Engineer as per DRG No: TR/GCC/CBE/230-110-33-22-11-EP/044 (Electricity will be brone by department) | Item Code / 100 | 12 | Nos |
| 101 | 101 | Supply of materials for earth pit of 115 mm dia to a depth of 6 mtrs. for earth electrode using M.S.rod 40 mm dia , red soil and bentonite powder of 30 Kg and other sundries as per approved drawing . Identification board of size 300 X 150 mm 14 SWG as directed by the field Engineer as per DRG No: TR/GCC/CBE/230-110-33-22-11-EP/044 | Item Code / 101 | 12 | Nos |
| 102 | 102 | Labour for erection of CT/PT junction box including fabrication of clamping arrangements | Item Code / 102 | 2 | No |
| 103 | 103 | Erection of auxiliaries equipment Labour for erection using crane 110KV CT,PT,NCT,reactor (one Single.Ph.unit) | Item Code / 103 | 3 | No |
| 104 | 104 | Labour for erection of 110 KV SF 6 Breaker using contract crane and including fixing of tandom rod alignment & gas filling by proper tools and tackles etc., as per standard | Item Code / 104 | 1 | No |
| 105 | 105 | Labour for erection of LAS including erection of base if required Station type single/ Double pole stack 110KV | Item Code / 105 | 3 | No |
| 106 | 106 | Labour for erection of 33/11 KV SF 6/VCB Breaker using contract crane and including fixing of tandom rod alignment & gas filling by proper tools and tackles etc., as per standard | Item Code / 106 | 1 | No |
| 107 | 107 | Erection of auxiliaries equipment Labour for erection using crane 33 /22/11KV CT,PT,NCT,reactor (one Single.Ph.unit) | Item Code / 107 | 3 | No |
| 108 | 108 | Labour for erection of Isolator / AB Switches, including erection of insulators and alignment works etc., without earth hand operated 11 KV | Item Code / 108 | 1 | Set |
| 109 | 109 | Labour for erection of LAS including erection of base if required Station type single/ Double pole stack 33/11KV | Item Code / 109 | 6 | No |
| 110 | 110 | Labour for Dismatling of Droppers and jumpers up to height of 6mts to 10 mts | Item Code / 110 | 39 | No |
| 111 | 111 | Dismatling of strung bus Labour for strining of strung bus including hoisting of insulator and erection of eye bolt and hardware fittings 11 KV Single Zebra (1Span of 3 Runs) | Item Code / 111 | 1 | Span |
| 112 | 112 | Erection of strung bus Labour for strining of strung bus including hoisting of insulator and erection of eye bolt and hardware fittings 11 KV Single Zebra (1Span of 3 Runs) under LC condition | Item Code / 112 | 1 | Span |
| 113 | 113 | Labour charges for Gas cutting of M.S.Chequered plate 6mm thick. | Item Code / 113 | 40 | Mtr |
| 114 | 114 | supply of CT/PT junction box out of 14Swg (2mm) M.S.Sheet wherever required as directed by the field Engineer. The box shall be vermin proof shall have sturdy hinges, provision for mounting terminal blocks and locking arrangements including cost of all materials.400W x 300H X 150D | Item Code / 114 | 1 | Nos |
| 115 | 115 | Labour for erection of panel/ battery charger, including supply & fabrication of MS flat 65x10mm for mounting arrangement and earthing of panel including hardwares.Simplex indoor / Out door | Item Code / 115 | 3 | Nos |
| 116 | 116 | Labour for excavation & refilling of trunch of avg. width of 0.3mts & avg depth of 0.4m for control cables/ Yard light cable | Item Code / 116 | 300 | M3 |
| 117 | 117 | Labour for laying of cable in duct/ trunch including the cost of Aluminium tag for identification.Upto 8Core | Item Code / 117 | 1.5 | KM |
| 118 | 118 | Labour for laying of cable in duct/ trunch including the cost of Aluminium tag for identification.Above 8Core | Item Code / 118 | 0.25 | KM |
| 119 | 119 | Labour laying of cable & clamping in structure.Upto 8Core | Item Code / 119 | 0.1 | KM |
| 120 | 120 | Supply of ISI mark cable glands as directed by the field Engineer.19/22mm | Item Code / 120 | 30 | No |
| 121 | 121 | Supply of ISI mark cable glands as directed by the field Engineer.25mm | Item Code / 121 | 8 | No |
| 122 | 122 | Supply of ISI mark cable glands as directed by the field Engineer.32mm | Item Code / 122 | 4 | No |
| 123 | 123 | Erection of cable glands by providing required No. of holes in the gland plate/ panels and Mechanism/ Control cubical, removing the cable sheeths, cutting of armour to the required length and making up the cable with gland and fixing the cable with glands in the required location.19/22 mm | Item Code / 123 | 30 | No |
| 124 | 124 | Erection of cable glands by providing required No. of holes in the gland plate/ panels and Mechanism/ Control cubical, removing the cable sheeths, cutting of armour to the required length and making up the cable with gland and fixing the cable with glands in the required location.25 mm | Item Code / 124 | 8 | No |
| 125 | 125 | Erection of cable glands by providing required No. of holes in the gland plate/ panels and Mechanism/ Control cubical, removing the cable sheeths, cutting of armour to the required length and making up the cable with gland and fixing the cable with glands in the required location.32 mm | Item Code / 125 | 4 | No |
| 126 | 126 | Supply of lugs, ferrules, sleeves, cable tie, insulation tape and other accessories for providing cable core end termination | Item Code / 126 | 300 | No |
| 127 | 127 | Labour Charges for cable core end termination | Item Code / 127 | 500 | No |
| 128 | 128 | Supply of mounting channel suitable for CBTM 5 terminal block in panel /box as required and as directed by the field Engineer. | Item Code / 128 | 1 | M |
| 129 | 129 | Supply of disconnected type terminal block suitable for CT Circuits in panels/ box as required & as directed by the field Engineer | Item Code / 129 | 28 | No |
| 130 | 130 | Supply of `B` Class GI pipe for extension of tandum /down pipe for AB Switches and for any other work as required and as directed by field Engineer 50mm dia | Item Code / 130 | 12 | Mtr |
| 131 | 131 | Erection of GI/MS pipe for extension of tandum /down pipe for AB Switches and for any other work as required by and as directed by field Engineer 50 mm Dia | Item Code / 131 | 12 | Mtr |
| 132 | 132 | Fixing of terminal block /disconnected type terminal block as required and directed by the field Engineer | Item Code / 132 | 28 | No |
| 133 | 133 | supply of sand drum made out of oil drum of size 580 mm dia and 420 mm height with conical cover made out of tin sheet provided with handle including cost of barrel, sand and consumables as directed by the field Engineer. | Item Code / 133 | 2 | No |
| 134 | 134 | Supply of yard light pole 6M Length Single Bracket pole with base Plate (250 x 250 x 6 mm) 76.10 mm OD ,x 3.65 mm thick ,6000 mm Length including cost of LED light , fiittings and painting in complete shape as per direction of field engineerand approved drawing. | Item Code / 134 | 5 | No |
| 135 | 135 | Supply of yard light pole 6M Length Double Bracket pole with base Plate (250 x 250 x 6 mm) 76.10 mm OD ,x 3.65 mm thick ,6000 mm Length including cost of LED light , fiittings and painting in complete shape as per direction of field engineer and approved drawing. | Item Code / 135 | 1 | No |
| 136 | 136 | Erection of Single Fitting LED Pole 6 & 8 mts and Laying of cable inside the pole including testing for burning condition. | Item Code / 136 | 10 | No |
| 137 | 137 | Erection of Double Fitting LED Pole 6 & 8 mts and Laying of cable inside the pole including testing for burning condition. | Item Code / 137 | 1 | No |
| 138 | 138 | Labour charges for loading / unloading / shifting of departmental materials at stores or site by the contarctor with out using board crane - 110 KV Isolator (Fragile) | Item Code / 138 | 5 | No |
| 139 | 139 | Labour charges for loading / unloading / shifting of departmental materials at stores or site by the contarctor with out using board crane - Cables/Conductors including cutting and rewinding (Fragile) | Item Code / 139 | 2 | KM |
| 140 | 140 | Labour for loading or unloading or shifting of materials using crane (or) manual - 11 KV Disc insulator / PT insulatore (Fragile) | Item Code / 140 | 120 | No |
| 141 | 141 | Labour for loading or unloading or shifting of materials using crane (or) manual - 110 KV Solid core Insulator (Fragile) | Item Code / 141 | 57 | No |
| 142 | 142 | Labour for loading or unloading or shifting of materials using crane (or) manual -Busbars ( Non Fragile) | Item Code / 142 | 21 | No |
| 143 | 143 | Labour charges for loading / unloading / shifting of departmental materials at stores or site by the contarctor with out using board crane - 33/11 KV Isolator (Non Fragile) | Item Code / 143 | 1 | No |
| 144 | 144 | Labour for loading or unloading or shifting of materials using crane (or) manual - 110 KV Breaker (Fragile) | Item Code / 144 | 1 | No |
| 145 | 145 | Labour for loading or unloading or shifting of materials using crane (or) manual - 11 KV Breaker (Fragile) | Item Code / 145 | 1 | No |
| 146 | 146 | Labour for loading or unloading or shifting of materials using crane (or) manual - 110 KV CT/LAS (Fragile) | Item Code / 146 | 6 | No |
| 147 | 147 | Labour for loading or unloading or shifting of materials using crane (or) manual - 11 KV CT/PT/LAS (Fragile) | Item Code / 147 | 6 | No |
| 148 | 148 | Labour for loading or unloading or shifting of materials using crane (or) manual - AC/DC/C&R Panels of Non grid type, Single feeder Control/Relay Panels of Grid type (Fragile) | Item Code / 148 | 3 | No |
| 149 | 149 | Labour for loading or unloading or shifting of materials using crane (or) manual Non - fragile | Item Code / 149 | 2.5 | MT |
| 150 | 150 | Labour for dismantling of iron ,steel and cement structures | Item Code / 150 | 1.25 | MT |
| 151 | 151 | Conveyance Charges for transporting by road in Coimbatore to Thingallur SS. (81 KM) | Item Code / 151 | 20 | MT |
| 152 | 152 | SGST to be quoted in Percentage (value alone)Ex. 9%, it should be entered as 9 only | Item Code / 152 | 1 | Percentage |
| 153 | 153 | CGST to be quoted in Percentage (value alone)Ex. 9%, it should be entered as 9 only | Item Code / 153 | 1 | Percentage |
| 154 | 154 | Inter-state GST @18% for other than Tamil Nadu supplier. If the contractor is within Tamil Nadu may be quoted as "0" only | Item Code / 154 | 1 | Percentage |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
