Water Supply And Sanitation Department-WSSD has published Observation Home Shimlapuri Renovation Of Toilets At Observation Home , Shimlapuri , Ludhiana. Submission Date for this Tender is 02-12-2020. Toilet Bathroom Tenders in Ludhiana Punjab. Bidders can get complete Tender details and download the document.
| Name of Work: Renovation of Toilets at observation home Shimlapuri, Ludhiana. | |||||
|---|---|---|---|---|---|
| Sl. No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Description | |||
| 2 | 1.1 | Providing and fixing in position Chinaware European type water closet P trap or S trap of approved make (to the approval of the Engineer-in-charge) consisting of 10 ltr. PVC flushing cistern, PVC short bend 32 mm dia including cost of seat cover complete in all respect and to the entire satisfaction of engineer-in-charge. | 111 | 4 | No. |
| 3 | 2.1 | Providing and fixing in position C.P. brass overhead shower 1 flow with shower arm with 15mm i/d inlet of approved make (to the approval of Engineer-in-charge) complete in all respect. | 222 | 1 | No. |
| 4 | 3 | Providing and fixing jet spray with 2'-6" long PVC pipe | 333 | ||
| 5 | 3.1 | With C.P Brass nut | 444 | 3 | No. |
| 6 | 4 | Providing & Fixing in postion vitreous chinaware white lavatory suites of approved make (to the approval of Engineer-in-charge) consisting of C.P. brass waste 32mm dia with one C.P. brass piller tap complete in all respect. | 555 | ||
| 7 | 4.1 | Size 550mm X 400 mm | 666 | 3 | No. |
| 8 | 5 | Providing & Fixing PVC waste pipe 32mm complete in all respect. | 777 | 2 | No. |
| 9 | 6 | Providing and fixing in position 5 mm thick bevelled edge miror of superior glass (of approved make) complete with 4 mm thick hard board backing fixed in with rawl plugs 50mm, C.P brass screws and washers and S/S Studs on top complete in all respect (as required by the Engineer-in-charge) | 888 | ||
| 10 | 6.1 | Size 600 mm x 450 mm | 999 | 1 | No. |
| 11 | 6.2 | Size 550 mm x 400 mm | 1110 | 3 | No. |
| 12 | 7 | Providing and fixing in position Soap dish fixed into wall with rawl plugs and C.P brass screws complete in all respect. | 1221 | 4 | No. |
| 13 | 8 | Providing and fixing in position towel rails / ring fixed in with rawl plugs embedded in walls with brass screws complete in all respect. | 1332 | ||
| 14 | 8.1 | C.P. brass towel rail size 15mm dia and 600mm long | 1443 | 1 | No. |
| 15 | 8.2 | C.P. brass towel ring | 1554 | 1 | No. |
| 16 | 9 | Providing and fixing in position C.P. Acrylic shelf with C.P.bracket and guard rails of approved make (to the approval of Engineer-in-charge ) fixed in with rawl plugs and C.P brass screws complete in all respect. | 1665 | ||
| 17 | 9.1 | CP Acrylic Corner Shelf size 300mm x 300mm | 1776 | 2 | No. |
| 18 | 10 | Providing & placing in position on terrace (at all floor levels) HDPE water Storage tanks of approved make (to the approval of Engineer-In-Charge) with cover with suitable locking arrangment and making necessary holes for inlet, outlet and over flo pipes but without fittings and base support for tank | 1887 | ||
| 19 | 10.1 | Tripple layer Tanks | 1998 | 500 | Ltr. |
| 20 | 10.2 | Double layer Tanks | 2109 | 1000 | Ltr. |
| 21 | 11 | Construction of R.C.C Platform for HDPE water storage tank. | 2220 | 2 | No. |
| 22 | 12 | Providing and Fixing FMD Door Sintex make complete with chowkhat and Aluminium fitting complete in all respects. | 2331 | ||
| 23 | 12.1 | Size 2'-6" x 7'-0" | 2442 | 8 | No. |
| 24 | 13 | Base course of floor consisting of 100mm thick cement concrete 1:8:16 and 100mm sand filling. | 2553 | 4.38 | Sqm |
| 25 | 14 | Providing & Fixing Exhaust fan 12" (Heavy) | 2664 | 2 | No. |
| 26 | 15 | Providing and fixing in position SWR UPVC soil waste vent or antisyphonage pipes as per IS -13592 of approved make (to the approval of engineer in charge) including cutting, jointing, wastage, but including cost of jointing. Complete in all respect. | 2775 | ||
| 27 | 15.1 | Type B | 2886 | ||
| 28 | 15.2 | 160mm o/d SWR UPVC pipe line laid complete | 2997 | 11 | Mtr. |
| 29 | 15.3 | 110mm o/d SWR UPVC pipe lines laid complete | 3108 | 31 | Mtr. |
| 30 | 15.4 | 75mm o/d SWR UPVC pipe lines laid complete | 3219 | 40 | Mtr. |
| 31 | 16 | Providing, laying, jointing, fixing and testing ISI Marked G.I. Pipe (as per IS 1239) B-Class Premium make such as (jindal Hisar) including cost of specials (such as tees, bends, sockets, elbows etc) painting with anti corrosive bitumastic paint, testing, cutting, threading inside building complete | 3330 | ||
| 32 | 16.1 | 15mm i/d | 3441 | 50 | Mtr. |
| 33 | 16.2 | 20mm i/d | 3552 | 45 | Mtr. |
| 34 | 16.3 | 25mm i/d | 3663 | 43 | Mtr. |
| 35 | 17 | Screed of 40 mm thick cement Concrete 1:8:16 to be laid below the topping. | 3774 | 4.38 | Sqm |
| 36 | 18 | CONCEALED IN WALL: Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes as per ISI 15778 (ISI marked with the prior approval of Engineer-in-charge), having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00m spacing including jointing of pipes & fittings, with one step CPVC solvent cement and testing of pipes complete as per direction of Engineer-in-charge | 3885 | ||
| 37 | 18.1 | CPVC SDR 11 pipe & fitting 16mm o/d | 3996 | 17 | Mtr. |
| 38 | 18.2 | CPVC SDR 11 pipe & fitting 20mm o/d | 4107 | 5 | Mtr. |
| 39 | 19 | Providing and fixing H.C.I floor traps conforming to I.S.I Specification (IS:1729) of approved make (to the approval of Engineer-in-charge) of the self cleaning design with C.P. brass hinged grating with frame with or without vent arm and including cement concrete 1:2:4 under and around the floor trap where required upto floor level complete in all respect including cutting and making good the walls and floors, etc. minimum depth of water should be 150mm with a minimum seal 50mm. | 4218 | ||
| 40 | 19.1 | With 75mm i/d outlet deep seal | 4329 | 6 | No. |
| 41 | 19.2 | With 75mm i/d outlet shallow seal | 4440 | 6 | No. |
| 42 | 20 | Providing & Fixing in position stop cock / Angle valve of approved make (to the approval of the Engineer-in-charge) complete in all respect | 4551 | ||
| 43 | 20.1 | C.P. brass 15mm concealed stop cock with flange. | 4662 | 11 | No. |
| 44 | 20.2 | CP brass 15mm Angel valve without flange. | 4773 | 15 | No. |
| 45 | 20.3 | CP brass 20mm concealed stop cock with flange. | 4884 | 3 | No. |
| 46 | 21 | Providing & Fixing in position PVC flexible tube connection of approved make (to the approval of Engineer in Charge) Complete in all respect. | 4995 | ||
| 47 | 21.1 | PVC tube connection of size 15 mm X 450 mm with CP brass nut | 5106 | 13 | No. |
| 48 | 22 | Providing and fixing in position SWR UPVC specials for soil waste vent or anti syphonage pipes as per IS-14735 of approved make (to the approval of Engineer-in-charge) including cutting and wastage etc. cutting holes in walls roofs or floors etc. and making good to its original condition but excluding cost of lead jointing. | 5217 | ||
| 49 | 22.1 | For 75mm o/d pipes | 5328 | ||
| 50 | 22.2 | Bend Plain | 5439 | 2 | No. |
| 51 | 22.3 | Collar | 5550 | 2 | No. |
| 52 | 23 | Coloured Granite stone tiles 20mm thick in skirting, risers of steps, dado walls and pillars laid in 12.5mm thick cement mortar 1:3 (1 cement 3 coarse sand) and jointed with neat cement slurry mixed with pigment to match the shade of stone, including rubbing and polishing including labour for fixing dowel pins and cramps. | 5661 | 1.79 | Sqm. |
| 53 | 24 | Providing & fixing in position G.I Tank Nipple of approved make (to the approval of Engineer in Charge) in PVC water storage tanks complete in all respect. | 5772 | ||
| 54 | 24.1 | G.I Tank Nipple 25mm i/d | 5883 | 2 | No. |
| 55 | 25 | Providing fixing and jointing brass ball valves screwed with SS/BRASS ball & spindle & Teflon seats on GI pipe lines including all carriages complete. | 5994 | ||
| 56 | 25.1 | 25mm i/d Brass ball valves | 6105 | 1 | No. |
| 57 | 26 | Providing, fixing and jointing G.I. Union Couplings (of approved make with the approval EIC) as per IS 1879 in G.I. Pipe lines complete in all respect. | 6216 | ||
| 58 | 26.1 | 20mm i/d G.I Union | 6327 | 1 | No. |
| 59 | 26.2 | 25mm i/d G.I Union | 6438 | 5 | No. |
| 60 | 27 | Providing and fixing in position automatic brass ball cock in tanks. | 6549 | ||
| 61 | 27.1 | Brass Ball Cock with rod and plastic ball. | 6660 | ||
| 62 | 27.2 | 25mm i/d | 6771 | 1 | No. |
| 63 | 28 | Cutting holes upto 23cm square through B.B. in cement walls or stone masonary wall in cement for pipes and making good the same and finishing according to existing finish where reqoired. | 6882 | ||
| 64 | 28.1 | Though Wall 22.86 cm Thick. | 6993 | 8 | No. |
| 65 | 29 | Providing & Fixing in position 15mm i/d bib cock of approved make (to the approval of Engineer in Charge) Complete in all respect. | 7104 | ||
| 66 | 29.1 | C.P. brass bib cock long nose / long body without flange. | 7215 | 5 | No. |
| 67 | 29.2 | C.P. brass bib cock without flange | 7326 | 7 | No. |
| 68 | 30 | Providing & Fixing in position CP brass flange of approved make (to the approval of Engineer in Charge) under various fixtures complete in all respect. | 7437 | 15 | No. |
| 69 | 31 | Providing and fixing in postion storage type automatic electric water heater pressure / non pressure type thermostatically controlled, single phase, vertical wall mounted of approved make (to the approval of Engineer-in-charge) with thermostats, inner container of stainless steel complete with 1 Mtr. three core flexible cord with plug, non return valve and pressure release valve complete including fixing and testing complete in all respect. | 7548 | ||
| 70 | 31.1 | 25 litre capacity water heater | 7659 | 1 | No. |
| 71 | 32 | Providing & Fixing in position CP Brass sink Cock swinging casted spout (table mounted) of approved make (to the approval of Engineer in Charge) Complete in all respect. | 7770 | 2 | No. |
| 72 | 33 | Providing & Fixing in position Stainless steel sink 1mm thick, grade-304 (18/8) with waste coupling Complete in all respect. | 7881 | ||
| 73 | 33.1 | Double bowl sink overall Size 1300mm x 500mm bowl size 550mm x 400mm x 230mm. | 7992 | 1 | No. |
| 74 | 34 | Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacture of approved make in all colours, shades except burgundy, bottle green, black of size 200 x 300 mm as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:4 (1 cement: 4 fine sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete. | 8103 | 109.22 | Sqm. |
| 75 | 35 | Providing and fixing 10mm thick acid and/or alkali resistant tiles 300 mm x 300 mm of approved make and colour using acid and/or alkali resisting mortar bedding and joints filled with acid and/or alkali resisting cement as per IS : 4457 complete as per the direction of Engineer-in- Charge, in flooring or in dado / skirting on a bed of 12 mm thick mortar 1 : 4 (1 acid proof cement: 4 coarse sand). | 8214 | 8.59 | Sqm. |
| 76 | 36 | Providing and fixing in position S.S Grating with frame approved make (to the approval of Engineer-in-charge) complete in all respect. | 8325 | 4 | No. |
| 77 | 37 | Providing and laying Rectified Porcelain floor tiles 400x400mm or more (thickness to be specified by the manufacturer) of premium quality conforming to IS:15622 of approved make in all colours laid on 20mm thick bed of Cement Mortar 1:4 (1 Cement : 4 Fine sand) for new flooring complete Rectified tiles have finished edges allowing them to be placed closer together for a narrower grout joint as opposed to other tiles and are more expensive. Unlike typical factory-edged tile, rectified tile is cut to size after the firing process. This process creates a precise, 90 degree angle edge and, as a result, can be laid with a tighter grout joint than un rectified tile. It gives a smooth, sophisticated and continuous look to the floor. Using a rectified tile allows you to place the tiles much closer together using tighter joint spacing. This makes the grout less visible as there is actually less grout used. When a wide space is used between tiles, the grout becomes a distinct part of the design and if the grout does not blend well with the tiles it can create a less than professional looking finish. In addition, the grout can easily become soiled and discoloured over time and will detract from the look of the tile itself. | 8436 | 23.18 | Sqm. |
| 78 | 38 | Cutting chase in brick walls in cement or in floor for embedding G.I or C.I pipes lines and making good the same to its original condition. | 8547 | ||
| 79 | 38.1 | Size 150mm x 150mm | 8658 | 20 | Mtr. |
| 80 | 39 | Providing fixing and jointing ISI marked Gun-metal peet valves (Heavy pattern) as per IS 778 with hand Wheels on GI pipe lines laid in the ground or in side buildings including all carriages complete. | 8769 | ||
| 81 | 39.1 | 25mm i/d Gun-metal peet valves Heavy pattern | 8880 | 1 | No. |
| 82 | 40 | Factory manufactured flush door fixed in position iron hinges,etc (excluding the cost of any fittings other than specified above but including labour for fixing the same in position (Code:II Revision IS-2191 Patr-I) 1973 for 32 doors | 8991 | ||
| 83 | 40.1 | 20mm thick | 9102 | 87 | sqm |
| 84 | 41 | Extra cost for pastel colour instead of white W.C. vitreous fixtures. | 9213 | ||
| 85 | 41.1 | Chinaware European type water closet P trap or S trap | 9324 | 1 | No. |
| 86 | 42 | Providing and fixing in position vitreous chinaware white lavatory suites of approved make (to the approval of Engineer-in-charge) including brass studs without CP fittings complete in all respect. | 9435 | ||
| 87 | 42.1 | Size 550 mm x 400 mm | 9546 | 1 | No. |
| 88 | 43 | Extra cost for pastel colour instead of white vitreous Chinaware Lavatory suites. | 9657 | ||
| 89 | 43.1 | Lavatory suites Size 550mmx400mm | 9768 | 1 | No. |
| 90 | 44 | Providing & Fixing in position Chinaware Indian Orisa water closet size 580mm of approved make (to the approval of the Engineer-in-charge) consisting of 10 ltr. PVC flushing cistern including cost of PVC long bend 32mm dia complete in all respect and to the entire satisfaction of Engineer-in-charge. | 9879 | 2 | No. |
| 91 | 45 | Providing and fixing vitreous chinaware standard pedestal of approved make (to the approval of Engineer-in-charge) for wash hand basin complete in all respect. | 9990 | 2 | No. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
