Procurement Of Different Consumables For Oh Of Unit No 8 And 9 , Dtps , Htps , Kasimpur, HTPS, KASIMPUR,ALIGARH-Uttar Pradesh

Procurement Of Different Consumables For Oh Of Unit No 8 And 9 , Dtps , Htps , Kasimpur , Stag Jointing Paste Type-BSize 1 Kg Pack , Smoke Grey Paint ( Berger/Asian Paints/Nerolac ) , Fevicol Sr 998 , Silver Conductive Grease 8463 Packed In Syringe 7 Gm , In Clean-Scn Insulator Dust Remover , Pidilite Holdite , Hardner Hy 840 , Diluent C , Devcon Sillite Sealant # 17140 ( 310 Ml Pack ) , Devcon Lps Elctro Contect Cleaner # 04016 ( 1 Litre ) , Star Washer , Size- L2995Moc- Neoprene Rubber ( As Per Sample ) , Hex Hd Screw M6x16Moc-Ht , Grade Not Less Than 8 . 8 , Make-Lps/Tvs/Unbrako , Hex Hd Screw M 10X25 With Nut And WasherMoc-Ht , Grade Not Less Than 8 . 8 , Make-Lps/Tvs/Unbrako , Hex Hd Screw M20x80 , With Nut And WasherMoc-Ht , Grade Not Less Than 8 . 8 , Make-Lps/Tvs/Unbrako , Hex Hd Screw M20x70Moc-Ht , Grade Not Less Than 8 . 8 , Make-Lps/Tvs/Unbrako , Hex Hd Screw M 12X30Moc-Ht , Grade Not Less Than 8 . 8 , Make-Lps/Tvs/Unbrako , Hex Nut M20Moc-Ht , Grade Not Less Than 8 . 8 , Make-Lps/Tvs/Unbrako , Screw Cap Soc M20x75Moc-Ht , Grade Not Less Than 8 . 8 , Make-Lps/Tvs/Unbrako , Screw Cap Soc M20x60Moc-Ht , Grade Not Less Than 8 . 8 , Make-Lps/Tvs/Unbrako , Hex Screw M 10X70Moc-Ht , Grade Not Less Than 8 . 8 , Make-Lps/Tvs/Unbrako , Soc Hd Cap Screw M24x90Moc-Ht , Grade Not Less Than 8 . 8 , Make-Lps/Tvs/Unbrako , Soc Hd Cap Screw M22x90Moc-Ht , Grade Not Less Than 8 . 8 , Make-Lps/Tvs/Unbrako , Hex Hd Ht Bolt ( Half Threaded ) M18x100Moc-Ht , Grade Not Less Than 8 . 8 , Make-Lps/Tvs/Unbrako , Hex Hd Ht Bolt ( Half Threaded ) M20x100 With Nut And WasherMoc-Ht , Grade Not Less Than 8 . 8 , Make-Lps/Tvs/Unbrako , Screw Hex M33x90 Moc-Ht , Grade Not Less Than 8 . 8 , Make-Lps/Tvs/Unbrako , Screw Hex M36x100Moc-Ht , Grade Not Less Than 8 . 8 , Make-Lps/Tvs/Unbrako , Screw Hex M36x180Moc-Ht , Grade Not Less Than 8 . 8 , Make-Lps/Tvs/Unbrako , Soc Hd Cap Screw M12x40 With Nut And WasherMoc-Ht , Grade Not Less Than 8 . 8 , Make-Lps/Tvs/Unbrako , Screw Hex M36x110Moc-Ht , Grade Not Less Than 8 . 8 , 60Make-Lps/Tvs/Unbrako , Spring Washer Dia 36Moc-Ht , Grade Not Less Than 8 . 8 , Make-Lps/Tvs/Unbrako , Hex Hdm 12X120Moc-Ht , Grade Not Less Than 8 . 8 , Make-Lps/Tvs/Unbrako , Bolts , Half Fine Threaded ( 1Mm Pitch ) M18x100 With Nut And WasherMoc-Ht , Grade Not Less Than 8 . 8 , Make-Lps/Tvs/Unbrako , Screw Hex P M 16X50 With Nut And WasherMoc-Ht , Grade Not Less Than 8 . 8 , Make-Lps/Tvs/Unbrako , Ht Hex Head Bolt With Nut And Washer M16x80Moc-Ht , Grade Not Less Than 8 . 8 , Make-Lps/Tvs/Unbrako , Ht Hex Head Bolt With Nut And Washer M12x40Moc-Ht , Grade Not Less Than 8 . 8 , Make-Lps/Tvs/Unbrako , Ht Hex Head Bolt With Nut And Washer M12x120Moc-Ht , Grade Not Less Than 8 . 8 , Make-Lps/Tvs/Unbrako , Ht Hex Head Bolt With Nut And Washer M10x80Moc-Ht , Grade Not Less Than 8 . 8 , Make-Lps/Tvs/Unbrako , Ht Hex Head Bolt With Nut And Washer M16x60Moc-Ht , Grade Not Less Than 8 . 8 , , Ss Nut M16Moc-Ht , Grade Not Less Than 8 . 8 , Make-Lps/Tvs/Unbrako , Allen Bolt , Quarter Thread M10x200 Required For Clamping Cylinder HeadMake- Tvs/Unbrako , Ht Coupling Bolts , With Bush And Nut , Size M16x80 Required For Apron Gear BoxMake- Tvs/Unbrako , Ht Hex Bolt , 10 . 9 Grade , Half Threaded Along With Nylock Nut M16x70 Required For Clamping Pad , Section Gear And Cylinder GuardMake- Tvs/Unbrako , Hex Nylock Nuts M-16 Required For Section GearMake- Tvs/Unbrako , Ht 8 . 9 Grade Bolts , Half Threaded Along With Matching Nuts M24x120 Required For Apron Foundation BoltMake- Tvs/Unbrako , Ht 8 . 9 Grade Bolts , Half Threaded ( 1 Mm Pitch ) Along With Matching Nuts M24x80 Required For Apron Gear Box CouplingMake- Tvs/Unbrako , Ht 8 . 9 Grade Bolts , Full Threaded Along With Matching Nuts M10x70 Required For Tippler StandMake- Tvs/Unbrako , Ht 8 . 9 Grade Bolts , Half Threaded Along With Matching Nuts M16x100 Required For Support Of Rubber PadMake- Tvs/Unbrako , Ht 8 . 9 Grade Bolts , Half Threaded Along With Matching Nuts M16x40 Required For Servo Motor Of TipplingMake- Tvs/Unbrako , Ht 10 . 9 Grade Bolts , Half Threaded ( 1 Mm Pitch ) Along With Matching Nuts M40x320 Required For Main Housing Of TipplerMake- Tvs/Unbrako , Ht 10 . 9 Grade Bolts , Half Threaded ( 1 Mm Pitch ) Along With Matching Nuts M30x150 Required For Coupler Of Sac Boom And Rack & PinionMake- Tvs/Unbrako , Ht 10 . 9 Grade Bolts , Half Threaded ( 1 Mm Pitch ) Along With Matching Nuts M24x200 Required For Sac Rail FixingMake- Tvs/Unbrako , Ht 10 . 9 Grade Bolts , Half Threaded ( 1 Mm Pitch ) Along With Matching Nuts M30x200 Required For Apron Hausing BaseMake- Tvs/Unbrako , Ht 8 . 9 Grade Bolts , Half Threaded ( 1 Mm Pitch ) Along With Matching Nuts M20x70 Required For Guide Roller Fixing Make- Tvs/Unbrako , Ht 8 . 9 Grade Bolts , Half Threaded ( 1 Mm Pitch ) Along With Matching Nuts M20x180 Required For Apron HausingMake- Tvs/Unbrako , Ht 8 . 9 Grade Bolts , Half Threaded ( 1 Mm Pitch ) Along With Matching Nuts M20x130 Required For Apron FoundationMake- Tvs/Unbrako , Ht 10 . 9 Grade Bolts , Half Threaded ( 1 Mm Pitch ) Along With Matching Nuts M24x130 Required For Apron FoundationMake- Tvs/Unbrako , Ht 8 . 9 Grade Bolts , Half Threaded ( 1 Mm Pitch ) Along With Matching Nuts M24x100 Required For Tippler Support BeamMake- Tvs/Unbrako , Ht 8 . 9 Grade Bolts , Half Threaded ( 1 Mm Pitch ) Along With Matching Nuts M24x70 Required For Rack Pinion Of Side Arm Charger And Plateform LockingMake- Tvs/Unbrako

Sr No	CorrigendumDate	Corrignedum	CorrigendumType	NewSubmissionDate
1	11-Dec-2020	Due date extension	Date	05-01-2021
2	06-Jan-2021	2nd Due date extension	Date	25-01-2021
3	25-Jan-2021	3rd due date extension	Date	18-02-2021

INR 354 /-

INR 6000.0 /-

INR 3.30 Lakhs /-

Name of Work: Procurement of different consumables for OH of unit no 8&9 ,DTPS, HTPS, Kasimpur
	Sl. No.	Item Description	Item Code / Make	Quantity	Units
1	1	Stag Jointing paste Type-B\nSize 1 Kg pack\n\n\n	item 1	30	kg
2	2	Smoke Grey Paint\n(Berger/Asian Paints/Nerolac)\n\n\n	item 2	8	litre
3	3	Fevicol SR 998	item 3	10	Kg
4	4	Silver conductive Grease 8463 packed in syringe 7 gm	item 4	70	gm
5	5	In clean-SCN insulator dust remover	item 5	70	litre
6	6	Pidilite Holdite	item 6	4	kg
7	7	Hardner HY 840	item 7	6	kg
8	8	Diluent C	item 8	4	kg
9	9	Devcon sillite Sealant # 17140 (310 ml pack)	item 9	8	No
10	10	Devcon LPS Elctro contect cleaner # 04016 (1 litre)	item 10	10	No
11	11	Star Washer, Size- L2995\nMOC- Neoprene Rubber\n (As per sample)\n	item 11	3	No
12	49	HEX HD SCREW M6X16\nMOC-HT,Grade not less than 8.8,\nmake-LPS/TVS/UNBRAKO\n	item49	50	No.
13	50	HEX HD SCREW M 10X25 WITH NUT AND WASHER\nMOC-HT,Grade not less than 8.8,\nmake-LPS/TVS/UNBRAKO\n	item50	50	No.
14	51	HEX HD SCREW M20X80 , WITH NUT AND WASHER\nMOC-HT,Grade not less than 8.8,\nmake-LPS/TVS/UNBRAKO\n	item51	400	No.
15	52	HEX HD SCREW M20X70\nMOC-HT,Grade not less than 8.8,\nmake-LPS/TVS/UNBRAKO\n	item52	100	No.
16	53	HEX HD SCREW M 12X30\nMOC-HT,Grade not less than 8.8,\nmake-LPS/TVS/UNBRAKO\n	item53	100	No.
17	54	HEX NUT M20\nMOC-HT,Grade not less than 8.8,\nmake-LPS/TVS/UNBRAKO\n	item54	100	No.
18	55	SCREW CAP SOC M20X75\nMOC-HT,Grade not less than 8.8,\nmake-LPS/TVS/UNBRAKO\n	item55	90	No.
19	56	SCREW CAP SOC M20X60\nMOC-HT,Grade not less than 8.8,\nmake-LPS/TVS/UNBRAKO\n	item56	90	No.
20	57	HEX SCREW M 10X70\nMOC-HT,Grade not less than 8.8,\nmake-LPS/TVS/UNBRAKO\n	item57	90	No.
21	58	SOC HD CAP SCREW M24X90\nMOC-HT,Grade not less than 8.8,\nmake-LPS/TVS/UNBRAKO\n	item58	150	No.
22	59	SOC HD CAP SCREW M22X90\nMOC-HT,Grade not less than 8.8,\nmake-LPS/TVS/UNBRAKO\n	item59	90	No.
23	60	HEX HD HT BOLT (HALF THREADED) M18X100\nMOC-HT,Grade not less than 8.8,\nmake-LPS/TVS/UNBRAKO\n	item60	170	No.
24	61	HEX HD HT BOLT( HALF THREADED) M20X100 with nut and washer\nMOC-HT,Grade not less than 8.8,\nmake-LPS/TVS/UNBRAKO\n	item61	170	No.
25	62	SCREW HEX M33X90 MOC-HT,Grade not less than 8.8,\nmake-LPS/TVS/UNBRAKO \n	item62	30	No.
26	63	SCREW HEX M36X100\nMOC-HT,Grade not less than 8.8,\nmake-LPS/TVS/UNBRAKO\n	item63	25	No.
27	64	SCREW HEX M36X180\nMOC-HT,Grade not less than 8.8,\nmake-LPS/TVS/UNBRAKO\n	item64	30	No.
28	65	SOC HD CAP SCREW M12X40 with nut and washer\nMOC-HT,Grade not less than 8.8,\nmake-LPS/TVS/UNBRAKO\n	item65	400	No.
29	66	SCREW HEX M36X110\nMOC-HT,Grade not less than 8.8,60\nmake-LPS/TVS/UNBRAKO\n	item66	25	No.
30	67	SPRING WASHER DIA 36\nMOC-HT,Grade not less than 8.8,\nmake-LPS/TVS/UNBRAKO\n	item67	50	No.
31	68	HEX HDM 12X120\nMOC-HT,Grade not less than 8.8,\nmake-LPS/TVS/UNBRAKO\n	item68	150	No.
32	69	BOLTS, HALF FINE THREADED (1MM PITCH) M18X100 with nut and washer\nMOC-HT,Grade not less than 8.8,\nmake-LPS/TVS/UNBRAKO\n	item69	100	No.
33	70	SCREW HEX P M 16X50 with nut and washer\nMOC-HT,Grade not less than 8.8,\nmake-LPS/TVS/UNBRAKO\n	item70	100	No.
34	71	HT HEX HEAD BOLT with nut and washer M16X80\nMOC-HT,Grade not less than 8.8,\nmake-LPS/TVS/UNBRAKO\n	item71	400	No.
35	72	HT HEX HEAD BOLT with nut and washer M12X40\nMOC-HT,Grade not less than 8.8,\nmake-LPS/TVS/UNBRAKO\n	item72	400	No.
36	73	HT HEX HEAD BOLT with nut and washer M12X120\nMOC-HT,Grade not less than 8.8,\nmake-LPS/TVS/UNBRAKO\n	item73	150	No.
37	74	HT HEX HEAD BOLT with nut and washer M10X80\nMOC-HT,Grade not less than 8.8,\nmake-LPS/TVS/UNBRAKO\n	item74	400	No.
38	75	HT HEX HEAD BOLT with nut and washer M16X60\nMOC-HT,Grade not less than 8.8,\n	item75	300	No.
39	76	SS NUT M16\nMOC-HT,Grade not less than 8.8,\nmake-LPS/TVS/UNBRAKO\n	item76	150	No
40	77	Allen Bolt, quarter thread M10X200 required for clamping cylinder head\nMake- TVS/Unbrako\n	item77	20	No
41	78	HT Coupling Bolts, with bush and nut, size M16X80 required for apron gear box\nMake- TVS/Unbrako\n\n\n	item78	30	No
42	79	HT Hex Bolt, 10.9 Grade, Half Threaded along with Nylock nut M16X70 required for clamping pad, section gear and cylinder guard\nMake- TVS/Unbrako\n\n	item79	300	No.
43	80	Hex Nylock nuts M-16 required for section gear\nMake- TVS/Unbrako\n\n	item80	100	No.
44	81	HT 8.9 Grade bolts, Half Threaded along with matching nuts M24X120 required for apron foundation bolt\nMake- TVS/Unbrako\n\n	item81	30	No.
45	82	HT 8.9 Grade bolts, Half Threaded(1 mm pitch) along with matching nuts M24X80 required for apron gear box coupling\nMake- TVS/Unbrako\n\n\n\n	item82	30	No.
46	83	HT 8.9 Grade Bolts, Full threaded along with matching nuts M10X70 required for tippler stand\nMake- TVS/Unbrako\n\n\n	item83	80	No.
47	84	HT 8.9 Grade bolts, Half threaded along with matching nuts M16X100 required for support of rubber pad\nMake- TVS/Unbrako\n\n	item84	200	No.
48	85	HT 8.9 Grade bolts, Half threaded along with matching nuts M16X40 required for servo motor of tippling\nMake- TVS/Unbrako\n\n\n	item85	40	No.
49	86	HT 10.9 Grade bolts, Half Threaded(1 mm pitch) along with matching nuts M40X320 required for main housing of tippler\nMake- TVS/Unbrako\n\n	item86	20	No.
50	87	HT 10.9 Grade bolts, Half Threaded(1 mm pitch) along with matching nuts M30X150 required for coupler of SAC boom and rack & pinion\nMake- TVS/Unbrako\n	item87	50	No.
51	88	HT 10.9 Grade bolts, Half Threaded(1 mm pitch) along with matching nuts M24X200 required for SAC rail fixing\nMake- TVS/Unbrako\n	item88	100	No.
52	89	HT 10.9 Grade bolts, Half Threaded(1 mm pitch) along with matching nuts M30X200 required for apron hausing base\nMake- TVS/Unbrako\n\n	item89	40	No.
53	90	HT 8.9 Grade bolts, Half Threaded(1 mm pitch) along with matching nuts M20X70 required for guide roller fixing \nMake- TVS/Unbrako\n\n	item90	150	No.
54	91	HT 8.9 Grade bolts, Half Threaded(1 mm pitch) along with matching nuts M20X180 required for apron hausing\nMake- TVS/Unbrako\n\n	item91	50	No.
55	92	HT 8.9 Grade bolts, Half Threaded(1 mm pitch) along with matching nuts M20X130 required for apron foundation\nMake- TVS/Unbrako\n\n	item92	30	No.
56	93	HT 10.9 Grade bolts, Half Threaded(1 mm pitch) along with matching nuts M24X130 required for apron foundation\nMake- TVS/Unbrako\n\n\n	item93	20	No.
57	94	HT 8.9 Grade bolts, Half Threaded(1 mm pitch) along with matching nuts M24X100 required for tippler support beam\nMake- TVS/Unbrako\n\n	item94	50	No.
58	95	HT 8.9 Grade bolts, Half Threaded(1 mm pitch) along with matching nuts M24X70 required for rack pinion of side arm charger and plateform locking\nMake- TVS/Unbrako\n\n	item95	300	No.