}

Bi Annual Servicing And Overhauling Of Elgi Make Compressors Installed With Circuit Breakers At 200Kv Substation Budaun, ETD BUDAUN-Uttar Pradesh

Uttar Pradesh Power Transmission Corporation Limited-UPPTCL has published Bi Annual Servicing And Overhauling Of Elgi Make Compressors Installed With Circuit Breakers At 200Kv Substation Budaun. Submission Date for this Tender is 27-11-2020. Circuit Breakers Tenders in ETD BUDAUN Uttar Pradesh. Bidders can get complete Tender details and download the document.




Tender Notice

26059115
Bi Annual Servicing And Overhauling Of Elgi Make Compressors Installed With Circuit Breakers At 200Kv Substation Budaun
National Competitive Bid
Indian
Uttar Pradesh
ETD BUDAUN
27-11-2020

Tender Details

Bi Annual Servicing And Overhauling Of Elgi Make Compressors Installed With Circuit Breakers At 200Kv Substation Budaun

Key Value

Document Fees
INR 236 /-
EMD
INR 3000.0 /-
Tender Value
Refer document

BOQ Items

Name of Work : Work of BI-ANNUAL SERVICING AND OVERHAULING OF ELGI MAKE COMPRESSORS INSTALLED WITH CIRCUIT BREAKERS AT 220KV SUBSTATION, BUDAUN, against E-Tender No. 09/W/ETD(BDN)/2020-21.
Sl. No. Item Description Item Code / Make Quantity Units
1 1 Bi-Annual servicing and overhauling of Air Compressor (THPC 200 ELGI make) installed with 220KV SF6 Circuit Breaker Installed in 200 MVA T/F HV Side Breaker (01 No.) And Transfer bus coupler Breaker, at 220KV Substation, Badaun with all cost of men, materials, T&P etc. required for satisfactory completion of the Job, as per Technical Specification & direction of the Supervising Engineer as per details below. Dismantling of Compressor Pipelines, HP & LP Headers, Piston Rings etc. with the temporary arrangement of pipes etc. to maintain the pressure of concern CBs up to 20Kg/cm2 during repair /overhauling period (01 Job for each Compressor). 2 Job.
2 2 Removing of piston Rings by dismantling of H.P&L.P cylinders then cleaning the carbonizing piston & ring grooves thoroughly. Replacement of Ring grooves along with related works. (01Job for each Compressor) as per details below. 2 (a) H.P. side 2 Job.
3 3 2 (b) L.P. side 2 Job.
4 4 Cleaning of HP & LP Headers after opening the headers, then tapping of valve plates and foot valves, 70mm & 50mm size as per details below. (01Job for each Compressor) as per details below. 3(a) H.P. side 70mm 2 Job.
5 5 3 (b) L.P. side 50 mm 2 Job.
6 6 Repairing of worn out Crank & Replacing the damaged Bar Pin, Bushes, both side Bearing, Oil Seal etc. with new ones (01 Job for each Compressor). 2 Job.
7 7 Replacement of HP Block and Air Filter Element by new one. (01 Job for each Compressor) 2 Job.
8 8 Replacement of Defective Non Return Valve &Overhauling of Safety Valve of the Compressor by replacement of Teflon seal, Nylon washers, Tension Spring, Lock washer etc. by new ones. (01Job for each Compressor). 2 Job.
9 9 Replacement of all the Gaskets, Packings then Reassembly of the same and finally checking of all pipe lines for No Air leakage and ensuring of inter locking of pressure 20Kg/cm2 (01Job for each Compressor) 2 Job.
10 10 Reassembling of Header and filling of Lubricating Oil (Servo Plus 150) up to required level & Checking, Cleaning & repairing of Electrical Wirings, if required functioning of the Compressors (01Job for each Compressor). 2 Job.
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail