}

Special Repairs To Boards Perimeter Wall Provision Of Rcc Storm Drain Along The Perimeter Wall Land Elevation And Connecting To Existing Drainage And Certain Em Work Services In Omq Area At 4 Afsb Varanasi Under Ge Af Gorakhpur, GE(AF) GORAKHPUR-Uttar Pradesh

Military Engineer Services-MES has published Special Repairs To Boards Perimeter Wall Provision Of Rcc Storm Drain Along The Perimeter Wall Land Elevation And Connecting To Existing Drainage And Certain Em Work Services In Omq Area At 4 Afsb Varanasi Under Ge Af Gorakhpur. Submission Date for this Tender is 17-12-2020. Electromechanical Work Tenders in GE(AF) GORAKHPUR Uttar Pradesh. Bidders can get complete Tender details and download the document.




Tender Notice

26042035
Corrigendum : Special Repairs To Boards Perimeter Wall Provision Of Rcc Storm Drain Along The Perimeter Wall Land Elevation And Connecting To Existing Drainage And Certain Em Work Services In Omq Area At 4 Afsb Varanasi Under Ge Af Gorakhpur
Open Tender
Indian
Uttar Pradesh
GE(AF) GORAKHPUR
17-12-2020

Tender Details

Special Repairs To Boards Perimeter Wall Provision Of Rcc Storm Drain Along The Perimeter Wall Land Elevation And Connecting To Existing Drainage And Certain Em Work Services In Omq Area At 4 Afsb Varanasi Under Ge Af Gorakhpur

Corrigendum Details

Sr No CorrigendumDate Corrignedum CorrigendumType NewSubmissionDate
1 04-Dec-2020 BOQ BOQ 10-12-2020
2 10-Dec-2020 Bid Auto Extn Corrigendum Bid Auto Extn Corrigendum 17-12-2020

Key Value

Document Fees
INR 500 /-
EMD
INR 54000.0 /-
Tender Value
INR 27 Lakhs /-

BOQ Items

Name of Work: SPECIAL REPAIR TO BOARDS PERIMETER WALL, PROVISION OF RCC STORM DRAIN ALONG THE PERIMETER WALL, LAND ELEVATION AND CONNECTING TO EXISTING DRAINAGE AND CERTAIN E/M WORK SERVICES IN OMQ AREA AT 4 AFSB VARANASI UNDER GE (AF) GORAKHPUR.
Sl. No. Item Description Item Code / Make Quantity Units
1 1 Excavation in trenches in soft/loose soil not exc 1.5 mtr wide and n.exc 1.5 mtr depth and getting out for foundation or cable trench complete all as specified and directed. 350 Cum
2 2 M&L for PCC 1:3:6 type C-2 using 40 mm graded stone aggregate as in foundation filling and mass concrete complete all as specified and as directed. 14 Cum
3 3 Demolition of brick work built in cement mortar including all quoins, pillars etc but excluding ashlar facings, dressed stone work and pre-cast articles complete all as specified and directed. 43 Cum
4 4 M&L for RCC design mix M-30 using 20 mm graded stone aggregate as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass complete all as specified and directed. 27 Cum
5 5 M&L for RCC design mix M-30 using 20 mm graded stone aggregate as in wall of any thickness complete all as specified and directed. 22.5 Cum
6 6 M&L for work to sides of concrete foundation, footing base of columns ,raft and raft beam side and soffit if any of foundation and plinth beams and similar work, vertical of batter rough finished surface of flat concrete complete all as specified and directed. 140 Sqm
7 7 M&L for work to sides of walls and similar work, vertical of batter rough finished surface of flat concrete complete all as specified and directed. 450 Sqm
8 8 M&L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. 5300 Kg
9 9 All as per Item No. 8 above but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders. 900 Kg
10 10 M&L for precast RCC 1:2:4 type B-1 using 20mm graded mechanically crushed stone agg as in cover slab for drains and similar articles etc, set in CM 1:4 with plain faces including chamfered weathering throating etc incl necessary form work complete as directed. 27 Cum
11 11 S&F reinforced cement concrete pipes, class NP-2, laid and jointed complete with collars of 450mm dia complete all as specified and directed. 70 RM
12 12 M&L for PCC 1:2:4 type B-2 using 40 mm graded stone aggregate as in foundation filling and mass concrete complete all as specified and as directed. 3.7 Cum
13 13 M&L for brick work using old size bricks with sub class 'B' bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:4 complete all as specified and directed. 42 Cum
14 14 All as per Item No. 13 above but except bricks. 5 Cum
15 15 M&L for 15 mm thick rendering on fair faces of brick work or on concrete surface in CM 1:4 finished surface even and smooth without using extra cement complete all as specified and directed. 1955 Sqm
16 16 Supply only integral liquid water proofing compound complete all as specified and directed. \nMake: Dr Fixit Pidiproof LW+ or equivalent in specified make. 3 Litre
17 17 M&L for PCC 1:2:4 type B-0 using 12.5mm graded stone aggregate as in copings, benching bed plate, stops including weathering, slightly rounded or chamfered angles and throating with necessary form work complete all as specified and directed. 3 Cum
18 18 M&L for PCC 1:2:4 type B-1 using 20mm graded stone aggregate as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass complete all as specified and directed. 0.8 Cum
19 19 M&L for RCC design mix M-25 using 20 mm graded stone aggregate as columns, pillars, piers, posts and struts complete all as specified and directed. 8 Cum
20 20 M&L for form work to sides of square pillars, post strut, piers column and stanchions rough finished surface of concrete complete all as specified and directed. 110 Sqm
21 21 S&F mild steel framed work as in door or gate of angle or other sections with gusset plates, rails, braces etc, using ornamental design as approved complete drilled for fixing of steel sheeting or other covering, doors etc to be prepared for hanging or sliding with and including either hooks and purpose made hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging, fastening and fixing complete conforming to Fe-290 Gde E-165. 110 Kg
22 22 S&F 0.8 mm thick plain black sheet, steel gates covering to door chowkhats and similar work cut to size, holes punched, including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40mm lap joints with riveted or welded seams including bending or turning up, mitred angles, etc as required complete all as specified and directed. 3 Sqm
23 23 M&L for preparation of new or previously untreated surfaces of steel of any description, over 10cm in width or girth and apply two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. 16 Sqm
24 24 Returning, filling in including spreading, leveling, watering and well ramming in layers not exc 25 cm thick complete all as specified and directed. 150 Cum
25 25 Removing surplus excavated material not exc 50 mtrs and depositing where directed at a level not exc 1.5 mtr above the starting point complete all as specified and directed. 200 Cum
26 26 M&L for PCC 1:4:8 type D-2 using 40 mm graded stone aggregate as in foundation filling and mass concrete complete all as specified and as directed. 9 Cum
27 27 Taking down cement or cement lime plaster any description incl racking out joints, hacking for keys, scrubbing down with water etc complete all as specified and directed. 1540 Sqm
28 28 M&L for 10 mm thick rendering on fair faces of coloumns or on concrete surface in CM 1:4 finished surface even and smooth without using extra cement complete all as specified and directed. 50 Sqm
29 29 M&L for preparation of newly plastered surfaces of wall and applying two coats of cement base paint complete all as specified and directed. 1925 Sqm
30 30 M&L for preparing old plastered surface of wall and by washing rubbing down and scrapping wherever required in patches and applying one coat of cement base paint complete all as specified and directed. 1000 Sqm
31 31 Dismantling MS work of any description not otherwise provided for complete all as specified and directed. 2.1 Per Quintal
32 32 S&F mild steel posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire etc flat iron fillets (for securing wire mess etc) including all necessary drilling, bolting or riveting etc and similar work complete all as specified and directed. 210 Kg
33 33 Dismantling of concertina coil 600mm dia any shape including razor wire of six link etc complete all as specified and directed.\nNote:- Concertina coil and six link razor wire shall be measured as one RM. 300 RM
34 34 S&F 610mm dia punched tape concertina coil (effective dia 550mm at stretch length of coil 6m) with two handle and spikes at both end of coil with dovetail clips 18 SWG, including razor wire 7 No, 6m length of each wire medium size, barbed length 20mm width 14mm, including 51 pins, 128 nos of clips in each coil including 230gm/Sqm zinc coating on core wire complete all as specified and directed. 300 RM
35 35 Supply and providing sand cushioning with dry clean sand 15 cm below cable and 8 cm above the cable complete all as specified and directed. Note: Punned thickness shall be measured for the purpose of payments. 13 Cum
36 36 Supply and laying burnt bricks old size sub class-B laid in trenches for cable protection with length of brick perpendicular to length of cable complete all as specified and directed. 1.3 Per 1000 Nos
37 37 S&F 40mm bore GI pipe, light grade with all fittings laid in trenches, road crossing and fixed to walls, on poles etc for cable protection complete all as specified and directed. 12 RM
38 38 Boring of holes horizontally for laying of 40 mm dia pipe (minimum depth 0.75 Mtr from top level) under road, Pavement, hard standing complete all as specified and directed. 10 RM
39 39 Supply, laying and testing 16 Sqmm, 4.0 Core XLPE insulated, armoured heavy duty electric cable, screened PVC bedded, galvanised steel strip or wire, with aluminium conductor 1100 V grade, laid in trenches/ along poles, ducts or through sleeve complete all as specified and directed \nNote: Earth work, sand cushioning and bricks will be measured and paid separately under relevant items. 150 RM
40 40 All as per item No. 39 above but for 35 Sqmm, 3.5 core XLPE cable. 50 RM
41 41 M&L for sub main wiring with 2 Nos single core PVC insulated unsheathed 2.5 Sqmm stranded copper conductor cable and 1 No single core PVC insulated-unsheathed 2.5 Sqmm stranded copper conductor cable for earth continuity, drawn in & including suitable PVC casing & capping /PVC pipe with all fittings ISI mark complete all as specified and directed. (length of 2 No 2.5 Sqmm conductor cable, 1 No. 1.5 Sqmm conductor earth continuity cable and accessories shall be measured as one unit length) 50 RM
42 42 M&L for sub main wiring with 2 Nos single core PVC insulated unsheathed 6.0 Sqmm stranded copper conductor cable and 1 No single core PVC insulated-unsheathed 4.0 Sqmm stranded copper conductor cable for earth continuity, drawn in & including suitable PVC casing & capping /PVC pipe with all fittings ISI mark complete all as specified and directed. (length of 2 No 6.0 Sqmm conductor cable, 1 No. 4.0 Sqmm conductor earth continuity cable and accessories shall be measured as one unit length) 450 RM
43 43 S&F factory made epoxy powder coated distribution board double door TPN 4 ways (VTPN MCCB DB) with metal door (IP-43 protection) fabricated from minimum 1.6mm thick CRCA sheet and fixed flush to wall and suitable for universal mounting and including 200 Amps copper bus bar, neutral bar, standard DIN rail, earth bar and cable ties for cable management, top and bottom removable gland plates complete all as specified & directed. 2 Each
44 44 S&F MCCB 4 pole, 415 volts, 125 Amp capacity of 16 KA breaking capacity complete all as directed. 2 Each
45 45 S&F factory made epoxy powder coated distribution board SPN 8 ways double door with acrylic top cover (IP-43 protection) fabricated from minimum 1.6mm thick CRCA sheet and fixed flush to wall and suitable for universal mounting and including 200 Amps copper bus bar, neutral bar, standard DIN rail, earth bar and cable ties for cable management, top and bottom removable gland plates all as specified & directed. 1 Each
46 46 S&F MCB SP 6 to 32 Amp 240 volts 10 KA breaking capacity 'C' curve complete all as specified and directed. 20 Each
47 47 S&F MCB SPN 63 Amp 240 volts 10 KA breaking capacity 'C' curve complete all as specified and directed. 1 Each
48 48 S&F sheet metal enclosures with socket plug top and MCBs with a two pin and earth plug and socket complete with one single pole MCB 20 Amp complete all as specified. 15 Each
49 49 M&L for earthing complete as in replacement with galvanized steel earth plate 60cmx60cmx6 mm thick buried vertically in ground to depth not less than 2.25 metres below ground level, with top edge of earth plate not less than 1.5 m below ground level, connected to earth lead GI 4 mm dia by means of bolts, nuts, check nuts and washers of galvanized iron and connection to main switch board of panel, including watering pipe GI 20 mm bore light grade, including protection pipe GI medium grade 15mm bore for earthing lead, wire mesh, funnel, salt, charcoal dust, excavation and refilling pit with PCC 1:2:4 type B1, precast RCC cover using XPM reinforcement weighing not less 4kg/sqm in lieu of CI cover and frame all as shown in electric plate of SSR part-I (2009), including testing on completion all as directed. 2 Each Job
50 50 M&L for earthing with Galvanised iron earth plate electrode of size 600x600x6mm thick buried directly in ground (earth pit not less than 2.25 mtr deep below normal GL) with top of earth plate not less than 1.5 mtr below GL connected to GI strip of size 25x4 mm connected to earth plate electrode by means of GI nuts, bolts, and washers with and incl, PCC 1:3:6 type C-1 pit with cover of RCC 1:2:4 type B-1 reinforced with welded steel wire fabric not less than 4 Kg per Sqm, watering arrangements with 20mm dia GI medium grade pipe, GI funnel with GI mesh, filling with mixture of common salt and charcoal, necessary excavation and earth work in any type soil, including test point, testing and commissioning complete all as specified and directed. Note: GI strip upto 7.5 mtr will be included in quoted rate. 5 Each Job
51 51 Supply, fabricate, erect, testing and commissioning LT outdoor feeder pillar box 500x500x200mm totally enclosed weather and vermin proof, suitably ventilated, 440 Volts, 50HZ,AC supply, factory made, fully compartmentalized made out of 3.15 mm thick CRCA sheet for load bearing and 2.00 mm thick non load bearing portions, protection of enclosure IP-54 as per IS-2147 of 1962 complete with pre-treatment with approved colour including suitable angle iron/flat iron frame work/supports, danger notice board, excavation and earth work, PCC foundation etc, out door type, cubical type as required with and including the following, supplied fitted and connected internally and connected to existing earthing complete all as specified and directed. \n(a) Incoming:-\n(i) MCB 63 Amps, TPN, 415 volts -01 No \n(ii) 4 Nos bus bar of equal size of aluminium conductor with PVC coloured heat shrinkable type sleeves continuous rating 100 Amps mounted on non resin type insulators with CTs digital type ammeter 0-100 Amp-01 Nos and volt meter 0-500 Volts with selector switches , set of LED type indicating lamps R,Y,B. \n(b) Outgoing:-\n(i) MCB SP & N 16 Amps C curve -01 No.\n(ii) Socket outlet 3/6 pin, 6/16 Amps outlet each controlled by MCB SP 16 Amps individually -06 Nos. 5 Each Job
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail