}

Advance Electro- Hydraulic Ot Table As Per Attached Specification As Annexure-A.-Odisha

East Coast Railway has published Advance Electro- Hydraulic Ot Table As Per Attached Specification As Annexure-A.. Submission Date for this Tender is 08-12-2020. Footwears Tenders in Odisha. Bidders can get complete Tender details and download the document.




Tender Notice

26013145
Advance Electro- Hydraulic Ot Table As Per Attached Specification As Annexure-A.
Open Tender
Indian
Odisha
08-12-2020

Tender Details

Supply Of Advance Electro- Hydraulic Ot Table As Per Attached Specification As Annexure-A., Advance Electro- Hydraulic Ot Table Specification For Advanced Electro-Hydraulic Ot Table. 1. Table Top Must Be Made Of Carbon Fibre Top Radiolucent Hylam Material Which Can Withstand Exposure To Frequent C-Arm Imaging. 2. Table Must Operate Electro- Hydraulically And In Case Of Break Down, Manual Over Ride Facility Should Be Available. 3. Multimodal Failure Proof Operation , Having The Following Provisions Panel Control Switch - Remote Hand Switch Operation- Foot Pump Operation With Fully Manual Mode At Any Point Of Time By Hand/ Foot. 4. The Table Top Must Have 5 Sections With The Following Dimensions. & Range Up- 1070 Mm. Or More, Down- 720 Mm. Or Less, Left Lateral Left - 20 Degree Or More, Right Lateral Left- 20 Degree Or More, Trendelenburg- 35 Degree Or More, B. Chair- Motorized + 80 Degree/-25 Degree, Head Up- 45Degree Or More, Head Down- 90 Degree Or More, Weight Bearing Capacity- 250 Kg Or More, Head Section- 260 Mm, Back Plate Section- 260 Mm, Mid Section- 420 Mm, Hip Section- 300 Mm, Split Leg Section- 510 Mm., Total Length- 1985 Mm. Or More, Width- 530 Mm. 5. Side Rails Having Safety Lock System (Ss.304). 6. Must Have High Performance Castor With Polyolefenetyre That Can Allow Effortless Manoeuvring & Long Life Without Damaging The Floor While Shifting. 7. The Following Accessories/Attachments Must Be Made Available (Stainless Steel) Arm Board- 02 No. Arm Board Locking Clamp- 02 No. Extension Side Rail- 03 No. Radial Setting Clamp Quick Coupling Type- 02 No. Goepel Knee Crutch, Socket Type- 02 No. Screen Rod With Locking Clamp- 01 No. Hip Section With Perioneal Post Holder - 01 No. Split Leg Section- Detachable- 02 No. Nylon Padded Square Pipes- 02 No. Screw Tension Device With Hand Crank Device For Adjustment- 02 No. Rotation Clamp - 02 No. Foot Plate With Block- 02 No. Boot With Block- 02 No. Perineal Post- 01 No. Counter Traction Post For Tibia With Condylor Fixtation Adjustable Hight Angle- 01 No. Radiolucent Hand Surgery Table With Height Adjustable Floor Support- 01 No. Humerus Supporting Plate For Elbow & Joint- 01 No. Side Support With Locking Clamp- 02 No. Raised Arm Board- 02 No. Stirrup Clamp With Rotation- 01 No. Horse-Shoe Shaped Headrest- 01 No Spine Frame- 01 No. C Shaped Head Rest- 01 No. Additional Rdl Table Top- 01 No. Shoulder Surgery Module Sitting Position (Detachable)- 01 No. Accessory Trolley- 01 No. 8. Traction Unit Should Be Attachable To The Top Of The Table & Traction Must Be Modular. 9. The Detachable Traction Area Should Be Fitted With Double Point Inserts. General Conditions:- 1. Original Manufacturer, Model No., Original Catalogue And Its Website Address Is Must For Technical Evaluation. 2. Compliance Sheet Should Be Marked With Page No. Of Original Website Vis-A-Vis With Consignee S Specification Parameter Wise For Comparison/Deviation, If Any, Is Mandatory Requirement For Evaluation Deviation Sheet Containing The Clarification Of The Points Of Deviation. 3. Local Authorised Dealer & Service Centre Is Preferable For After Sale Service. 4. The Manufacturing Farm Should Have Attach A Declaration That He Has Not Been Blacklisted/Any Vigilance Case Pending Against Him And The Cost Of The Equipment Is Comparable To Lpr Sold To Any Govt. Organisation/ Psu Hospitals/Reputed Corporate Hospitals. 5. The Said Model Of The Equipment Is Latest One In The Market & Ensures Amc/Cmc After Cessation Of Warranty Period For Next 05 Years., Firm To Be Furnished: Charges Of Amc Along With The Cost Of Items To Be Used In Preventive Scheduled For 1St Year Post Warranty Period Of 2 Years. Warranty Period: 0 Years, Amc Period: 0 Years, Rate Of Discounting: 0 %, Firm To Be Furnished: Charges Of Amc Along With The Cost Of Items To Be Used In Preventive Scheduled For 2Nd Year Post Warranty Period Of 2 Years. Warranty Period: 0 Years, Amc Period: 0 Years, Rate Of Discounting: 0 %, Firm To Be Furnished: Charges Of Amc Along With The Cost Of Items To Be Used In Preventive Scheduled For 3Rd Year Post Warranty Period Of 2 Years. Warranty Period: 0 Years, Amc Period: 0 Years, Rate Of Discounting: 0 %, Firm To Be Furnished: Charges Of Amc Along With The Cost Of Items To Be Used In Preventive Scheduled For 4Th Year Post Warranty Period Of 2 Years. Warranty Period: 0 Years, Amc Period: 0 Years, Rate Of Discounting: 0 %, Firm To Be Furnished: Charges Of Amc Along With The Cost Of Items To Be Used In Preventive Scheduled For 5Th Year Post Warranty Period Of 2 Years. Warranty Period: 0 Years, Amc Period: 0 Years, Rate Of Discounting: 0 %

Key Value

Document Fees
Refer document
EMD
Refer document
Tender Value
Refer document
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail