Quote The Rates P/S & Fixing Of Tables,Chairs & Sofas Of Bosscabin,Godrej,Featherite & Leatherlite Brand To Rdccbank 1. Board Room Table (825Mm Width) Shall Be Made Up Of 50 X 25 Mm (Clear) Teak/ Beech Wood Frame At Every 900Mm To 1200Mm C/C In Vertical And The Same Frame Shall Be Used In Top & Bottom Forming C Shape. The C Frame Shall Be Supported With 75X45mm Dia Ss Of 304 Grade Legs. The Sides, Apron On All Four Sides Shall Be Made Up Of 19Mm/12Mm Thk Ply And Flexi Ply Of Approved Make With Depression & Shall Be Finished With 10Mm Thk Toughened Tinted Machine Polished Glass On Internal Sides. The Grooves Shall Be Finished With Polish And Shall Be Part Of The Design. The Table Top Shall Be Made Up Of 19Mm Thk Ply Of Approved Make.The Table Top Shall Be Finished In Combination With 12Mm Thk Tinted Machine Polished Glass With Bevelled Outer Edges/19Mm Thick Engineered Marble With Bevelled Outer Edges Of Approved Shade And 4Mm Thick Veneer Of Approved Make And Shade On All Sides. The Veneer Shall Be Finished With Two Coats Of Melamine Polish As Per Architects Suggestion. The Table Shall Have 20Mm & 25Mm Ss Pipe Of 304 Grade On External Edges And Polished Tw/Beechwood Edge Beading Of Size 50X45mm. Basic Rate Of Veneer Shall Not Be Less Than Rs.1,300/- Per Sqm (Excluding Tax). Refer Drawings., 2. Reception Table(Size: 2400Mm X 600 Mmx 750/950 Mm Ht.) Providing And Fixing Curved Reception Table Comprising Of The Following: 19Mm Thk. Bwr Is 303 Grade Borer Free Ply Framework Of As Per Design. 4Mm Thk. Veneer Sheets Fixed Of Approved Make On All Exposed Surfaces And Finished With 3 Or More Coats Of Melamine Polish As Per Directions. 1Mm Thk. Laminate Sheets Of Approved Make On Inside Surfaces As Per Directions. 25Mm Dia Ss Strips For The Front Apron As Per Design. The Table Shall Have Drawer Unit With Two Drawers On Telescopic Channels And Bottom Openable Shutters Finished With 4Mm Th Veneer Of Approved Shade On Exposed Surfaces And Inside Finished With Hand Polish To The Architects Satisfaction. Including All Hardware And Multipurpose Locks Of Godrej Make And All Ss Handles And Fixture Complete. Prior Confirmation Shall Be Obtained From The Architect For All The Hardware, Locks And Fixture Etc., Complete. Provision Shall Be Made For Footrest. The Rate Is Inclusive Of Work Top, Pedestal Unit, Drawers, Shutters, Hardwares, Melamine Polish And Any Other Item Required For Reception Table As Per The Specification, Drawing And Instructions Of Eic / Architect. Rate Shall Include Cost Of All Hardwares Of Approved Make -Ozone/Ebco/Hafele., 3. Excecutive Table For President Cabin - (Make : Bosss Cabin-Larry/Godrej -Jefferson) Providing, Supplying And Installation Of The Executive Table- Colour- Walnut Wood Material- Natural Wood Veneer & Lacquer Providing & Fixing Table Of Size- 3600/2600 W X 1900 D X 750 H Mm Is Finished With Walnut Veneer And Charcoal Gray Leather. The Side Cabinet Is Finished With Lacquered Aluminium Door Panels, Inbuilt Wire Management With Multifunction Wire Management Panel Including Vga, Power Data, Networking And Telephone Sockets. Built With Premium Fgv Damping Hinges, Hettich Soft Close Slide Rails And Bmb Lock. Note: Prior Confirmation Shall Be Taken For The Make , Colour And Model For The Table From The Bank Officials/Architect Before Placing The Order, 4. Excecutive Table For Vice President Cabin - (Make : Bosss Cabin-Mary/Godrej-Icon) Providing, Supplying And Installation Of The Executive Table-Colour- Walnut And Charcoal Gray Material- Laminate & Matte Leather Providing & Fixing Table Of Size- 2200/2225 W X 1850/1200 D X 750 H Mm, Made Using Environment Grade Mdf And Walnut Finished Laminate, Office Desk Comes Fitted With A Wire Box Having Power And Data Ports And Leg Panels Are With Steel Beam Note: Prior Confirmation Shall Be Taken For The Make , Colour And Model For The Table From The Bank Officials/Architect Before Placing The Order, 5. Excecutive Table For Md Cabin - (Make : Bosss Cabin-Mary/Godrej-Maestro) Providing, Supplying And Installation Of The Executive Table- Colour- Walnut And Charcoal Gray Material- Laminate & Matte Leather Providing & Fixing Md Cabin Table Of Size 2560/2850 W X 2200 D X 750 H Mm , Made Using Mdf And Walnut Finished Laminate, It Include A Side Cabinet And Wire Box With Power ,Data And Telephone Ports Note: Prior Confirmation Shall Be Taken For The Make , Colour And Model For The Table From The Bank Officials/Architect Before Placing The Order, 6. Excecutive Table For Gm & Agm Cabin - (Make :Godrej -Aristo/Featherlite-Signature) The Main Table Shall Be Of Size 1650 X1650x 750Mm T. Top Surface Of The Table Shall Made Up Of Mdf (Medium Density Fibre ) Board Duly Finished With Veneer And Final Coating Of Pu. The Main Desk Should Contain In Built Key Board Pull Out Tray For Keeping Keyboard Of Computer. The Front Modesty Panel Of The Table Shall Be Made Up Of Mdf Board Of Size 1640 Mm X 600 Mm X 16Mm Which Shall Also Be Duly Finished With Veener And Pu Coating. For Personal Storage One Mobile Pedestal (3 Drawer Unit) Shall Be Provided Of Size 510 Mm Width X 635 Mm Height And 445 Mm Depth. The Storage Pedestal Shall Also Be Made Up Of Mdf Duly Finished With Veener & Final Coating Of Pu. The Side Shall Be Of Size 1200Mm Width X 445Mm Depth X 660 Mm Height. The Side Unit Shall Be Made Up Of Mdf Board Duly Finshed With Veneer And Final Finish By Pu Coating. The Side Unit Shall Contain Open Space For Keeping Cpu In Extreme Right Side, One Closed Storage Shutter At Extreme Left End & Open Space In The Middle With One Shelf For Keeping Files. The Thickness Of The Top Of The Side Unit Shall Be 25Mm. Note: Prior Confirmation Shall Be Taken For The Make , Colour And Model For The Table From The Bank Officials/Architect Before Placing The Order, 7. Centre Tables (Make:Godrej -Pisa) Glass Shall Be 12+/-0.3Mm Thick Black Tinted Toughened Glass Uv Glued With Bushes Made In Ss 202 Grade For Fixing With Understructure. It Shall Be A Welded Assembly Made In Ss202 Grade Having Dia. 12+/-0.04 As Per Is:1762. Overall Dimensions Of Table Shall Be Width Of Table= 112.0 Cm, Depth=64.0 Cm, Height=34.9 Cm., 8. Providing And Supplying Of Hb Chair For President Cabin (Make : Rich- Godrej/Featherlite) With Centre Tilt Synchro Mechanism,Seat Depth Adjustment,Aluminimum Die Cast Pedestal Note: Prior Confirmation Shall Be Taken For The Make , Colour And Model For The Chair From The Bank Officials/Architect Before Placing The Order, 9. Providing And Supplying Of Visitor Chair For President Cabin (Make : La Sede- Godrej/Featherlite) With Armrest And With Casters Note: Prior Confirmation Shall Be Taken For The Make , Colour And Model For The Chair From The Bank Officials/Architect Before Placing The Order, 10. Providing And Supplying Of Visitor Low Back Chair For Vice President & Md Cabin (Make : Featherlite- Item00000402/Godrej/Eurotech) Note: Prior Confirmation Shall Be Taken For The Make , Colour And Model For The Chair From The Bank Officials/Architect Before Placing The Order, 11. Providing And Supplying Of Chair For Vice President & Md Cabin - High Back Leather Chair (Make : Featherlite- Item00002794 /Godrej/Eurotech) Note: Prior Confirmation Shall Be Taken For The Make , Colour And Model For The Chair From The Bank Officials/Architect Before Placing The Order, 12. Providing And Supplying Of Board Room Chair - Hb Leather Chair (Make : Featherlite- Item00003092 /Godrej/Eurotech) Note: Prior Confirmation Shall Be Taken For The Make , Colour And Model For The Chair From The Bank Officials/Architect Before Placing The Order, 13. Providing And Supplying Of Staff Chair- Mb Chrome Base Single Lock Synchro Adj Arm (Make : Featherlite-Ralwmbbpl1m02aa31zz /Godrej/Eurotech) Note: Prior Confirmation Shall Be Taken For The Make , Colour And Model For The Chair From The Bank Officials/Architect Before Placing The Order, 14. Providing And Supplying Of Staff Visitor Chair- Mb Chrome Base Adj Arms Aa51 Self Calibrate (Make : Featherlite-Rampmbbch2m15aa51zz R /Godrej/Eurotech) Note: Prior Confirmation Shall Be Taken For The Make , Colour And Model For The Chair From The Bank Officials/Architect Before Placing The Order, 15. Providing And Supplying Of Gm & Agm Chair Hb Chrome Base M02 Synchro Arms Adj(1- Way) Ls (Make : Featherlite-Rcplhbbpl1m02aa21azr /Godrej/Eurotech) Note: Prior Confirmation Shall Be Taken For The Make , Colour And Model For The Chair From The Bank Officials/Architect Before Placing The Order, 16. Three Seater Sofa - The Seat Is Made Of Pu Foam With Density 28± 2 Kg/Cu.Mtr Having An Additional Top Layer Of Super Soft Pu Foam In Density 32 ± 2 Kg/Cu. Upholstered With Leatherette. The Back Is Made Of Pu Foam With Density 28 ± 2 Kg/Cu. Mtr With Two Additional Top Layer Of Supersoft Foam Of Density 32±2 Kg/Cu. Mtr, Upholstered With Fabric Or Leatherette Understructure Is Made Up Of 1.2±0.1 Cm. Thick Hot Pressed Plywood( Moisture Resistance & Termite Proof As Per Is: 303) & Pinewood Of Cross Section Devoid Of Major Knots & Surface Defects 6 Nos. Per Seat & 3.8 Mm Dia Zigzag Spring Assembly Is Mounted Over Understructure For Cushioning Purpose 6 Nos. Per Seat & 3.8 Mm Dia Zigzag Spring Assembly Is Mounted Over Understructure For Cushioning Purpose. It Is A Welded Assembly Made In Stainless Steel (Grade Ss 202) Tube & Plate With Plastic Endcap. (W) 206.0* (D) 90.5(H) 85.5 Cm Seat (H) 45.0 Cm Note: Prior Confirmation Shall Be Taken For The Make , Colour And Finish For The Sofas From The Bank Officials/Architect Before Placing The Order, 17. Two Seater Sofa- The Seat Is Made Of Pu Foam With Density 28± 2 Kg/Cu.Mtr Having An Additional Top Layer Of Super Soft Pu Foam In Density 32 ± 2 Kg/Cu. Upholstered With Leatherette. The Back Is Made Of Pu Foam With Density 28 ± 2 Kg/Cu. Mtr With Two Additional Top Layer Of Supersoft Foam Of Density 32±2 Kg/Cu. Mtr, Upholstered With Fabric Or Leatherette Understructure Is Made Up Of 1.2±0.1 Cm. Thick Hot Pressed Plywood( Moisture Resistance & Termite Proof As Per Is: 303) & Pinewood Of Cross Section Devoid Of Major Knots & Surface Defects 6 Nos. Per Seat & 3.8 Mm Dia Zigzag Spring Assembly Is Mounted Over Understructure For Cushioning Purpose 6 Nos. Per Seat & 3.8 Mm Dia Zigzag Spring Assembly Is Mounted Over Understructure For Cushioning Purpose. It Is A Welded Assembly Made In Stainless Steel (Grade Ss 202) Tube & Plate With Plastic Endcap. (W) 206.0* (D) 90.5(H) 85.5 Cm Seat (H) 45.0 Cm Note: Prior Confirmation Shall Be Taken For The Make , Colour And Finish For The Sofas From The Bank Officials/Architect Before Placing The Order, 18. Single Seater Sofa - The Seat Is Made Of Pu Foam With Density 28± 2 Kg/Cu.Mtr Having An Additional Top Layer Of Super Soft Pu Foam In Density 32 ± 2 Kg/Cu. Upholstered With Leatherette. The Back Is Made Of Pu Foam With Density 28 ± 2 Kg/Cu. Mtr With Two Additional Top Layer Of Supersoft Foam Of Density 32±2 Kg/Cu. Mtr, Upholstered With Fabric Or Leatherette Understructure Is Made Up Of 1.2±0.1 Cm. Thick Hot Pressed Plywood( Moisture Resistance & Termite Proof As Per Is: 303) & Pinewood Of Cross Section Devoid Of Major Knots & Surface Defects 6 Nos. Per Seat & 3.8 Mm Dia Zigzag Spring Assembly Is Mounted Over Understructure For Cushioning Purpose 6 Nos. Per Seat & 3.8 Mm Dia Zigzag Spring Assembly Is Mounted Over Understructure For Cushioning Purpose. It Is A Welded Assembly Made In Stainless Steel (Grade Ss 202) Tube & Plate With Plastic Endcap. (W) 206.0* (D) 90.5(H) 85.5 Cm Seat (H) 45.0 Cm Note: Prior Confirmation Shall Be Taken For The Make , Colour And Finish For The Sofas From The Bank Officials/Architect Before Placing The Order, 19. Providing And Fixing Etching Film Of 3M Make On Glass Partitions As Per Design. The Rate Shall Including Cost And Conveyance Of All Materials To Site, Lead, Lift And Hire Charges, Labour Charges, Complete As Per Instructions Of Architect., 20. Supply, Installation, Printing & Designing Of 3M Innovative Clear Vinyl Printed On High Resolution 1440 Dpi With Eco Solvent Platform And Approved Oem Lnks And Applied On Glass Of Any Thickness And Fixed With Spacer Of 25Mm. Cost Shall Be Inclusive Of Design Concept Graphic And Charges As Per Clients Requirements With Prior Approval Before Printing And Installation ., 21. Supply And Fixing Of Ultra Modern Wallpaper, Preparing The Surface Well Using Sealer As A Primer Coat And Applying The Required Water Based Adhesive Having Anti- Microbial Properties And Zero Voc, Making It Good For Installation. Installation To Be Done Using Specially Chosen Tools To Ensure Accurate Measurements.Clean And Precise Cutting And Seamless Application, Work To Be Carried Out By Trained Applicators As Per The Approved Design And Color Approved By The Architect Including The Cost Of All Adhesives And Labor Used.Basic Cost Of Wall Paper Shall Be Rs.105/Sft (1 Roll= 9 Sqm), 22. Asian Paint- Kintsugi Texture-Metallic Finish Providing And Applying Texture Paint Of Approved Make , Shade And Texture .The Surface Should Be Prepared As Per The Vendors Specification As Required., 23. Cot And Night Tables Shall Be Made Up Of 19Mm Thick Bwr Grade Plywood And Finished With 1Mm Thick Laminate And Supported With Plywood Boxing /Ss Finished Legs Etc., Complete. The Cot Shall Have 2 Nos. Of Night Tables Of Size 16 X 16 X 16 .The Night Tables Shall Have Two Drawer Units, The Internal Surfaces Shall Be Finished With 1 Mm Thick Laminate And Approved Make Of Hardware., 24. Cot Head Board Shall Be Made Up Of 19 Mm Thick Plywood And Finished With 1Mm Thick Laminae Of Approved Shades And Frame Work Shall Be Done With Plywood With Provisions For Striplight Behind The Head Board .The Head Board Shall Have Grooves And Divisions As Per Architects Suggestion Etc. Complete., 25. Providing And Supplying Of Regular Mattresses (Make: Sleepwell/Peps/Kurl On) For Single Cot (Size:0.90M X 1.80 M, 5 Thick) The Mattress Shall Be Made Of Hourglass- Shaped Metal Springs Interconnected Using Metal Wire Finished With A Thick Layer Of Quilting And Foam Note: Prior Confirmation Shall Be Taken For The Make For The Matresses From The Bank Officials/Architect Before Placing The Order ., 26. Providing And Fixing Of Book Rack Made Up Of 19Mm Thick Plywood Finished With 1Mm Thick Laminate Of Approved Make And Colour On All Exposed Sides . The Book Rack Shall Be Of Open Shelves As Per Design. The Edges Shall Be Finished With Pvc Edge Bending., 27. 12Mm Thick Floor Matts - 3M Make Heavy Traffic Backed Scraper Matting As Per Approved Shade And Size., 28. Roller Blinds Of Window Fashion/Vista Levelor Make , Shall Be Made Up Of 38Mm Dia Aluminium Tube With Ss Chain For Operating With Stopper And 38 Mm Clutch Mechanism With Bottom Weight Bar Either Round Or Flat In Shape With White Colour Powder Bracket Seal And Fabric Shall Be Of 0 To 5% Opening And Shall Be Of Glass Fibre Or Pvc Composition Having Uv Blockage Upto 90% Complete Installation., 29. Providing & Supplying Of Decorative Lights Such As- 1. Led Strip (Appx. 100M) 2. Profile Lights (Appx. 300M) 3.Chandeliers Of Various Sizes ( 6 Nos) 4. Hanhing Lights At Auditorium (Appx. 20Nos), 30. Providing & Supplying Of Decorative Items Such As- 1. Paintings Of Sizes 600/1200 X 600/1200 Mm (5 Nos) - Prints On Canvas Of Giclee Prints/Serigraphs 2. Vases Of Various Sizes - Made Of Wooden And Metal (5 Nos) Basic Rate Of Each Each Vase Shall Be Rs. 7000.00.Pc 3. Metal Art On Walls Of Size 1200 X 600 Mm ( 3 Nos) Basic Rate Of Each Art Shall Be Rs. 7000.00/Pc As Per Architects Suggestion.,
