Municipal Corporation-MC has published Const Of Auditorium , Market , And Multi Level Parking In Mc Office , Const Of Auditorium , Market , And Multi Level Parking In Mc Office , Ambala City . . Submission Date for this Tender is 02-12-2020. Auditorium Construction Tenders in commissioner, municipal corporation, ambala city Haryana. Bidders can get complete Tender details and download the document.
Name of Work: Construction of Auditorium, Market and Multi Level Parking in MC office Ambala City | |||||
---|---|---|---|---|---|
Sl. No. | Item Description | Item Code / Make | Quantity | Units | |
1 | 1 | CIVIL WORK | |||
2 | 2 | Supplying and filling in plinth with sand under floors, including watering,ramming, consolidating and dressingcomplete. | 1738.61 | Cum | |
3 | 3 | Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement\n: 3 coarse sand (zone - III) : 6 graded stone aggregate 20 mm nominal\nsize) over 75mm thick bed of dry brick ballast 40 mm nominal size,\nwell rammed and consolidated and grouted with fine sand, including\nnecessary excavation, levelling & dressing & finishing the top smooth. | 256.25 | Sqm | |
4 | 4 | Providing and fixing of expansion joint system related with floor locationas per drawings and direction of Engineer-In-Charge. The joints systemwill be of extruded aluminum base members, self aligning / self centeringarrangement and support plates etc. as per ASTM B221-02. The systemshall be such that it provides floor to floor /floor to wall expansion controlsystem for various verticallocaltion in load application areas thataccommodates multi directional seismic movement without stress toit's components. System shall consist of metal profiles with a universalaluminum base member designed to accommodate various projectconditions and finish floor treatments. The cover plate shall be designedof width and thickness required to satisfy projects movement and loadingrequirements and secured to base members by utilizing manufacturer’spre-engineered self- centering arrangement that freely rotates / movesin all directions. The Self - centering arrangement shall exhibit circular\nsphere ends that lock and slide inside the corresponding aluminumextrusion cavity to allow freedom of movement and flexure in all directionsincluding vertical displacement. Provision of Moisture Barrier Membranein the Joint System to have watertight joint is mandatory requirementall as per the manufactures design and as approved by Engineer -in-Charge. (Material shall confirm to ASTM 6063). | 247.78 | mt. | |
5 | 5 | Providing and fixing of expansion joint system related with wall joint (internal/\nexternal) location as per drawings and direction of Engineer-In- Charge.The joints shall be of extruded aluminum base members, self aligning /centering arrangement and support plates as per ASTM B221- 02. Thematerial shall be such that it provides an Expansion Joints Systemsuitable for vertical wall to wall/ wall to corner application, both new andexisting construction in office Buildings & complexes with no slippingdown tendency amongst the components of the Joint System. The JointSystem shall utilize light weight aluminum profiles exhibiting minimalexposed aluminum surfaces mechanically snap locking the multicellular\nto facilitate movement. (Material shall confirm to ASTM 6063). | |||
6 | 6 | Wall Joint of 100 mm gap | 541.6 | mt. | |
7 | 7 | Providing and fixing of expansion joint system of approved make andmanufactures for various roof locations as per approved drawings and direction of Engineer-In-Charge. The joints shall be of extruded aluminum base members with, self aligning and self centering arragement suppor plates asper ASTM B221-02. The system shall be such that it provideswatertight roof to roof/roof to corner joint cover expansion control systemthat is capable of accommodating multidirectional seismic movementwithout stress to its components. System shall consist of metal profilethat incorporates a universal aluminum base member designed toaccommodate various project conditions and roof treatments. The coverplate shall be designed of width and thickness required to satisfymovement and loading requirements and secured to base members byutilizing manufacturer’s pre-engineered self-centering arrangement thatfreely rotates / moves in all directions. The Self centering arrangement shall exhibit circular sphere ends that lock and slide inside thecorresponding aluminum extrusion cavity to allow freedom of movementand flexure in all directions including vertical displacement. The JointSystem shall resists damage or deterioration from the impact of fallingice, exposure to UV, airborne contaminants and occasional foot trafficfrom maintenance personnel. Provision of Moisture Barrier Membranein the Joint System to have water tight joint is mandatory requirement.(Material shall confirm to ASTM 6063.) | |||
8 | 8 | Roof Joint of 100 mm gap | 168.02 | mt. | |
9 | 9 | Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement,\nmixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. | |||
10 | 10 | Granite of any colour and shade | |||
11 | 11 | Area of slab upto 0.50 sqm | 6.95 | Sqm | |
12 | 12 | Area of slab over 0.50 sqm | 388.71 | Sqm | |
13 | 13 | Providing edge moulding to 18 mm thick marble stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc.complete as per design approved by Engineer-in-Charge. | 506.74 | Mt. | |
14 | 14 | Extra for fixing marble /granite stone, over and above corresponding basic item, in facia and drops of width upto 150 mm with epoxy resin based adhesive, including cleaning etc.complete. | 68.18 | Mt. | |
15 | 15 | Extra for providing opening of required size & shape for wash basin/ kitchen sink in kitchen platform, vanity counter and similar location in marble/ Granite/ stone work, including necessary holes for pillar taps etc.including moulding, rubbing and polishing of cut edges etc. complete. | 39 | Each | |
16 | 16 | Providing and fixing machine cut, mirror/ eggshell polished Marble\nstone work for wall lining (veneer work) including dado, skirting,risers ofsteps etc., in required design and pattern wherever required, stones ofdifferent finished surface texture, on 12 mm (average) thick cementmortar 1:3 (1 cement : 3 coarse sand) laid and jointed with white cementslurry @ 3.3 kg/sqm including pointing with white cement slurry admixedwith pigment of matching shade, including rubbing, curing, polishing\netc. all complete as per Architectural drawings, an as directed by theEngineer-in-Charge. | |||
17 | 17 | 18 mm thick Italian Marble stone slab,Perlato, Rosso verona,\nFire Red or Dark Emperadore etc. | 334.22 | sqm. | |
18 | 18 | Designing, fabricating, testing, installing and fixing in position Curtain Wall with Aluminium Composite Panel Cladding, with open grooves for linear as well as curvilinear portions of the building , for all heights and all levels etc. including:\n(a) Structural analysis & design and preparation of shop drawings for pressure equalisation or rain screen principle as required, proper drainage of water to make it watertight including checking of all the structural and functional design.\n(b) Providing, fabricating and supplying and fixing panels of aluminium composite panel cladding in pan shape in metalic colour of approved shades made out of 4mm thick aluminium composite panel material consisting of 3mm thick FR grade mineral core sandwiched between two Aluminium sheets (each 0.5mm thick). The aluminium composite panel cladding sheet shall be coil coated, with Kynar 500 based PVDF / Lumiflon based fluoropolymer resin coating of approved colour and shade on face # 1 and polymer (Service) coating on face # 2 as specified\nusing stainless steel screws, nuts, bolts, washers, cleats, weather silicone sealant, backer rods etc.\n | 326.11 | SQM | |
19 | 19 | Providing and fixing factory made uPVC white colour sliding glazed window upto 1.50 m in height dimension comprising of uPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes, wire mesh and silicon sealent shall be paid separately) Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable.Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. | |||
20 | 20 | Two track two panels sliding window made of (small series)\nframe 52 x 44 mm &sash 32 x 60 mm both having\nwall thickness of 1.9 ± 0.2 mm and single glazing bead of\nappropriate dimension. (Area of window upto 1.75 sqm) | 4.86 | Sqm. | |
21 | 21 | Three track three panels sliding window made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 1.75 sqm) | 6.3 | Sqm. | |
22 | 22 | Providing and fixing factory made uPVC white colour sliding glazed window above 1.50 m in height dimension comprising of uPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll orming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads, uPVC extruded interlocks and uPVC extruded Inline sash adaptor (if required), EPDM gasket, wool pile, zinc alloy (white powder coated) handle on one side of extreme panel along with zinc plated mild steel multi point locking having transmission gear with keeps, zinc alloy (white powder coated) touch lock with hook (if required for wire mesh panel), stainless steel (SS 304 grade) body with adjustable double nylon rollers (weight bearing capacity to be 120 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. | |||
23 | 23 | After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes, wire mesh and silicon sealent shall be paid separately). Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. | 18.9 | Sqm. | |
24 | 24 | Providing and fixing fire resistant door frame of section 50 x 60 mm onhorizontal side & 35 x 60 mm on vertical sides having built in rebatemade out of 1.6 mm thick GI sheet ( Zinc coating not less than120gm/m²) suitable for mounting 120 min Fire Rated Glazed DoorShutters.The frame shall be filled with Mineral wool Insulation havingdensity min96Kg/m³ . The frame will have a provision of G.I. Anchor fastners 14 nos( 5 each on vertical style & 4 on horizontal style of size M10 x 80 )suitable for fixing in the opening along with Factory made Template forSS Ball Bearing Hinges of Size 100x89x3mm for fixing of fire ratedglazed shutter . The frame shall be finished with a approved fire resistantprimer or Powder coating of not less than 30 micron in desired shadeas per the directions of Engineer - in- charge.(Cost of SS ball bearinghinges is excluded). | 166 | Mt. | |
25 | 25 | Providing and fixing 60 mm thick glazed fire resistant door shutters of 120 min Fire Rating confirming to IS:3614 (Part II) or EN1634-1:1999,tested and certified as per laboratory approved by Engineer-in-charge, with suitable mounting on door frame, consisting of vertical styles, top rail & side rail 60 mm x 60 mm wide and bottom rail of 110 mm x 60 mm made out of 1.6mm thick G.I. sheet (zinc coating not less than 120gm/m²) duly filled mineral wool insulation having density min 96 kg/ m³ and fixing with necessary stainless steel ball bearing hinges of size 100x89x3mm of approved make, including applying a coat of approved fire resistant primer or powder coating not less than 30 micron etc all complete as per direction of Engineer-in-charge (panelling to be paid for\nseperately). | 97.44 | Sqm | |
26 | 26 | Providing and fixing glazing in fire resistant door shutters, fixed panels & partitions etc., with G.I. beading made out of 1.6 mm thick G.I. sheet (zinc coating not less than 120 gm/m²) of size 20 x 33 mm screwed with M4 x 38 mm SS screws at distance 75 mm from the edges and 150 mm c/c , including applying a coat of approved fire resistant primer/ powder coating of not less than 30 micron on G.I. beading, & special ceramic tape of 5 x 20 mm size etc complete in all respect as per NBC 2016, IS 16231 (Part 3):2016 and as per direction of Engineer-incharge with glass of required thickness having 120 minutes of fire resistance both integrity & radiation control (EW120) and minimum 20 minutes of insulation (EI20). The manufacturer have to give test report/certification of fire glass and the glass should have the stamp showing the value of E, EW & EI. The glass shall be tested in approved NABL accredited lab or by any other accreditation body which operates in accordance with ISO/IEC 17011 and accredits labs as per ISO/IEC 17025 for testing and calibration scopes shall be eligible. The maximum glazing size shall not be more than 1100x2200 mm (w x h) or 2.42 sqm. | 73.98 | Sqm | |
27 | 27 | Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. | 10.08 | Sqm | |
28 | 28 | Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-incharge,(for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts,fasteners etc.). | |||
29 | 29 | Weight @ 12Kg/Mt. | 1604.76 | KG | |
30 | 30 | Tile work in skirting, risers of steps and dado up to 2 m height over 12 mm thick bed of cement mortar 1:3 (1 cement :3 coarse sand) and jointed with grey cement slurry @ 3.3 kg/sqm, including pointing in white cement mixed with pigment of matching shade complete. | |||
31 | 31 | Marble tiles (polished) Raj Nagar | 413.9 | Sqm | |
32 | 32 | Marble stone flooring with 18 mm thick marble stone, as per sample ofmarble approved by Engineer-in-charge, over 20 mm (average) thick baseof cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed withgrey cement slurry, including rubbing and polishing complete with : | 3072.54 | sqm. | |
33 | 33 | Providing and laying machine cut, mirror polished, Italian Marble stone flooring laid in required pattern in linear portion of the building all complete as per architectural drawings, with 18 mm thick stone slab laid over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with white cement slurry @ 4.4 kg/sqm including\npointing with white cement slurry admixed with pigment to match the marble shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. | |||
34 | 34 | 18 mm thick Italian Marble stone slab, Perlato, Rosso verona,\nFire Red or Dark Emperadore etc. | |||
35 | 35 | Total Of (a+b+c) | 303.83 | sqm. | |
36 | 36 | Providing and fixing Glass mossaic tiles on finished plain wall surface of size 20 mm x 20 mm x 4 mm in all colour, design , fixing in customize design as per direction of Engineer-in- Charge. The glass mosaic tiles to be fixed on the wall surface with the help of approved adhesive applied at the rate of 2.5 kg per sqm and grouting of the same. The rate is inclusive of all operation, material and required pattern approved by Engineer-in-Charge: | 50.7 | sqm. | |
37 | 37 | Providing and fixing Gl Clip in Metal Ceiling System of 600x600 mm module which includes providing and fixing 'C' wall angle of size 20x30x20 mm made of 0.5 mm thick pre painted steel along the perimeter of the room with help of nylon sleeves and wooden screws at 300 mm center to centre, suspending the main C carrier of size 10x38x10 mm made of G.I steel 0.7 mm thick from the soffit with help of soffit cleat 37x27x25x1.6 mm, rawl plugs of size 38x12 mm and C carrier suspension clip and main carrier bracket at 1000 mm c/c. Inverted triangle shaped Spring Tee having height of 24 mm and width of 34 mm made of Gl steel 0.45 mm thick is then fixed to the main C carrier and in direction perpendicular to it at 600 mm centers with help of suspension brackets. Wherever the main C carrier and spring T have to join, C carrier and spring T connectors have to be used. All sections to be galvanized @ 120 gms/sqm (both side\ninclusive), fixing with clip in tiles into spring T with : | |||
38 | 38 | GI Metal Ceiling Clip in plain Beveled edge global white\ncolor tiles of size 600x600 and 0.5 mm thick with 25\nmm height, made of G I sheet having galvanizing of 100\ngms/ sqm (both sides inclusive) and electro statically\npolyester powder coated of thickness 60 microns\n(minimum), including factory painted after bending. | |||
39 | 39 | Total (a+b+c) | 312.87 | sqm | |
40 | 40 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete asper the architectural drawings and the directions of engineer-in-charge .(Cost of aluminium snap beading shall be paid in basic item): | |||
41 | 41 | With float glass panes of 5 mm thickness (weight not\nless than 12.50 kg/ sqm) | |||
42 | 42 | - | 42.66 | Sqm | |
43 | 43 | Providing and fixing aluminium tubular handle bar 32 mm outer dia, 3.0 mm thick & 2100 mm long with SS screws etc .complete as per direction of Engineer-in-Charge. | |||
44 | 44 | Powder coated minimum thickness 50 micron aluminium\ntubular handle bar | |||
45 | 45 | - | 28 | Each | |
46 | 46 | Providing and fixing 12 mm thick frameless toughened glass door\nshutter of approved brand and manufacture, including providing and fixing top & bottom pivot & double action hydraulic floor spring\ntype fixing arrangement and making necessary holes etc. for fixing\nrequired door fittings, all complete as per direction of Engineer-incharge (Door handle, lock and stopper etc.to be paid separately). | |||
47 | 47 | O | 30 | Sqm | |
48 | 48 | Providing and supplying aluminium extruded tubular and other aluminium sections as per the architectural drawings and approved shop drawings , the aluminium quality as per grade 6063 T5 or T6 as per BS 1474,including super durable powder coating of 60-80 microns conforming to AAMA 2604 of required colour and shade as approved by the Engineer-in-Charge. ( The item includes cost of material such as cleats, sleeves, screws etc. necessary for fabrication of extruded aluminium frame work. Nothing extra shall be paid on this account). The weight of aluminium extruded section shall be taken for purpose of payment. | |||
49 | 49 | Weight 6.50 Kg/Sqm | 10913.2 | Kg | |
50 | 50 | Designing, fabricating, testing, protection, installing and fixing in position semi (grid) unitized system of structural glazing (with open joints) for linear as well as curvilinear portions of the building for all heights and all levels, including:\n(a) Structural analysis & design and preparation of shop drawings forthe specified design loads conforming to IS 875 part III (the systemmust passed the proof test at 1.5 times design wind pressurewithout any failure), including functional design of the aluminumsections for fixing glazing panels of various thicknesses, aluminiumcleats, sleeves and splice plates etc. gaskets, screws, toggles,nuts, bolts, clamps etc., structural and weather silicone sealants,flashings, fire stop (barrier)-cum-smoke seals, microwave curedEPDM gaskets for water tightness, pressure equalisation & drainage and protection against fire hazard including:\n(b) Fabricating and supplying serrated M.S. hot dip galvanised / Aluminium alloy of 6005 T5 brackets of required sizes, sections and profiles etc. to accommodate 3 Dimentional movement for achieving perfect verticality and fixing structural glazing system rigidly to the RCC/ masonry/structural steel framework of building structure using stainless steel anchor fasteners/ bolts, nylon seperator to prevent bimetallic contacts with nuts and washers etc. of stainless steel grade 316, of the required capacity and in required numbers.\n\n | |||
51 | 51 | (c) Providing and filling, two part pump filled, structural silicone sealant and one part weather silicone sealant compatible with the structural silicone sealant of required bite size in a clean and controlled factory / work shop environment, including double sided spacer tape, setting blocks and backer rod, all of approved grade, brand and manufacture, as per the approved sealant design, within and all around the perimeter for holding glass.\n(d) Providing and fixing in position flashings of solid aluminium sheet1 mm thick and of sizes, shapes and profiles, as required as perthe site conditions, to seal the gap between the building structureand all its interfaces with curtain glazing to make it watertight.\n( e) Making provision for drainage of moisture/ water that enters the curtain glazing system to make it watertight, by incorporating principles of pressure equalization, providing suitable gutter profiles at bottom (if required), making necessary holes of required sizes and of required numbers etc. complete. This item includes cost of all inputs of designing, labour for fabricating and installation of aluminium grid, installation of glazed units, T&P, scaffolding and other incidental charges including wastages etc., enabling temporary structures and services, cranes or cradles etc. as described above and as specified. The item includes the cost of getting all the structural and functional design including shop drawings checked by a structural designer, dully approved by Engineer-in-charge.\n | |||
52 | 52 | The item also includes the cost of all mock ups at site, cost of all samples of the individual components for testing in an approved laboratory, field tests on the assembled working structural glazing as specified, cleaning and protection till the handing over of the building for occupation. In the end, the Contractor shall provide a water tight structural glazing having all the performance characteristics etc. all complete as required, as per the Architectural drawings, as per item description, as specified, as per the approved shop drawings and as directed by the Engineer- in-Charge.\n Note:- 1. The cost of providing extruded aluminium frames, shadow boxes, extruded aluminium section capping for fixing in the grooves of the curtain glazing and vermin proof stainless steel wire mesh shall be paid for separately under relevant items under this subhead. However, for the purpose of payment, only the actual area of structural glazing (including width of grooves) on the external face shall be measured in sqm. up to two decimal places. | |||
53 | 53 | Note:-2. The following performance test are to be conducted\non structural glazing system if area of structural glazing\nexceeds 2500 Sqm from the certified laboratories accreditated by NABL(National Accreditation Board for Testing and Calibration Laboratories), Department of Science & Technologies, India. Cost of testing is payable separately.\nThe NIT approving authority will decide the necessity of testing on the basis of cost of the work, cost of the test and importance of the work. Performance Testing of Structural glazing system Tests to be conducted in the NABL accredited lab or by any other accreditation body which operates in accordance with ISO / IEC 17011 and accredits labs as per ISO/ IEC 17025. 1. Performance Laboratory Test for Air Leakage Test (-50pa\nto - 300pa) & (+50pa to +300pa) as per ASTM E-283-04\ntesting method for a range of testing limit 1 to 200 mVhr\n2. Static Water Penetration Test. (50pa to 1500p) as per\nASTME- 331-09 testing method for a range up to 2000 ml.\n3. Dynamic Water Penetration (50pa to 1500pa) as per AAMA\n501.01- 05 testing method for a range upto 2000 ml\n4. Structural Performance Deflection and deformation by static air pressure test (1.5 times design wind pressure without any failure) as per ASTME-330-10 testing method for a range upto 50 mm 5. Seismic Movement Test (upto 30 mm) as per AAMA 501.4-\n09 testing method for Qualitative test, Tests to be\nconducted on site.\n6. Onsite Test for Water Leakage for a pressure range 50\nkpa to 240 kpa (35psi) upto 2000 ml | |||
54 | 54 | Total Area | 1678.96 | sqm | |
55 | 55 | Providing, assembling and supplying vision glass panels (IGUs) comprising of hermetically-sealed 6-12- 6 mm insulated glass (double glazed) vision panel units of size and shape as required and specified, comprising of an outer heat strengthened float glass 6mm thick, of approved colour and shade with reflective soft coating on surface # 2 of approved colour and shade, an inner Heat strengthned clear float glass 6mm thick, spacer tube 12mm wide, dessicants, including primary seal and secondary seal (structural silicone sealant) etc. all complete for the required performances, as per the Architectural drawings, as per the approved shop drawings, as specified and as directed by the Engineer-in-Charge. The IGUs shall be assembled in the factory/ workshop of the glass processor.(Payment for fixing of IGU Panels in the curtain glazing is included in cost of item No.25.2) For payment, only the actual area of glass on face # 1 of the glass panels (excluding the areas of the grooves and weather silicone sealant) provided and fixed in position, shall be measured in sqm.\n | |||
56 | 56 | (i) Coloured tinted float glass 6mm thick substrate with reflective soft coating on face # 2, + 12mm Airgap + 6mm Heat Strengthened clear Glass of approved make having properties as visible Light transmittance (VLT) of 25 to 35 %, Light reflection internal 10 to 15%, light reflection external 10 to 20 %, shadingcoefficient (0.25- 0.28) and U value of 3.0 to 3.3 W/m2 degree K etc. The properties of performance glass shall be decided by technical sanctioning authority as per the site requirement. | 1433.48 | Sqm | |
57 | 57 | Extra for openable side / top hung vision glass panels (IGUs) including providing and supplying at site all accessories and hardwares for the openable panels as specified and of the approved make such as heavy duty stainless steel friction hinges, min 4 -point cremone locking sets with stainless steel plates, handles, buffers etc. including necessary stainless steel screws/ fasteners, nuts, bolts, washers etc. all complete as per the Architectural drawings, as per the approved shop drawings, as specified and as directed by the Engineerin-Charge. | 167.9 | Sqm | |
58 | 58 | Providing, fabricating and supplying shadow box of required size and shape, for fixing in the spandrel portion of the structural glazing, in linear as well as curvilinear portions of the building by providing semi -rigid, inorganic, non-combustible fibre glass wool insulation 50 mm thick, conforming to IS: 8183 and BS: 3958 Part 5. The insulation layer shall have facing (factory bonded on surface # 1 of the fibre glass insulation layer), of black non-woven fibre glass tissue of nominal thickness 0.5 mm and nominal mass not less than 60 gm /sqm, made of randomly oriented glass fibres distributed in a binder by awet-lay process including fixing 1.5 mm thick solid aluminum sheet backing using, 6 mm thick cement board including SS rivets, nuts,bolts, washers etc complete. | 245.48 | Sqm | |
59 | 59 | Providing and supplying Spandrel Glass Panels comprising of 6 mm thick heat strengthened monolithic float glass of approved colour and shade with reflective soft coating on surface # 2 of approved colour and shade so as to match the colour and shade of the IGUs in the vision panels etc. ,all complete for the required performances as specified, as per the Architectural drawings, as per the approved shop drawings, as specified, and as directed by the Engineer- in- Charge. For payment, only the actual area of glass on face # 1 of the glass panels (but excluding the area of grooves and weather silicone sealant) provided and fixed in position, shall be measured in sqm. (Payment for fixing of Spandrel Glass Panels in the curtain glazing is included in cost of relevent Item*).“(i) Coloured tinted float glass 6mm thick substrate with reflective soft coating on face # 2, having properties as visible Light transmittance (VLT) of 25 to 35 %, Light reflection internal 10 to 15%, light reflection external 10 to 20 %, shading coefficient (0.25- 0.28) and U value of 3.0 to 3.3 W/m2 K etc. . The properties of performance glass shall be decided by technical sanctioning authority as per the site requirement. | 245.48 | Sqm | |
60 | 60 | Design supply & installation of suspended Spider Glazing system\ndesigned to withstand the wind pressure as per IS 875 (Part-III). The Suspended System held with Spider Fittings of SS-316 Grade Steel of approved manufacturer with glass panel having 12 mm thick clear toughened glass held together with SS- 316 Grade Stainless steel Spider & bolt assembly with laminated glass fins 21 mm thick. The Glass fins and glass panel assembly shall be connected to Slab/ beams by means of SS- 316 Grade stainless steel brackets & Anchor bolts and at the bottom using SS channel of 50x25x2mm using fastener & anchor bolts, non staining weather sealants of approved make, Teflon/ nylon bushes and separators to prevent bi-metallic contacts, all complete to perform as per specification and approved drawings. The complete system to be designed to accommodate thermal expansion & seismic movements etc. The joints between glass panels (6 to 8 mm) and gaps at the perimeter & in U channel of the assembly to be filled with non staining weather sealant, so as to make the entire system fully water proof & dust proof. The rate shall include all design, Engineering and shop drawing including approval from structural designer, labour, T&P, scaffolding, other incidental charges including wastage, enabling temporary services all fitting fixers nut bolts, washer, Buffer plates, fastener,anchors, SS channel laminated glass etc. all complete. For thepurpose of payment, actual elevation area of Glazing including thickness of joints and the portion of Glass panel inside the SS channel shall be measured. | 119.45 | Sqm | |
61 | 61 | Providing & Fixing of fixing 4.3mm thick and 2.00 metre width Carpet Rolls having a density of 70 million fibres of nylon 6.6 per M2 firmly anchored into a waterproofing backing and having average recycled contents of 22% by weight . The Carpet must inhibit the growth of Bacteria and Fungi. The Carpet must be ZERO EMISSION Carpet (Emission below detection limit after 28 days in accordance with ISO 16000-9) . Fire Test EN-13501, Appearence Retention Hexapod ISO 140-8, Friction Slip Resistance Test EN 14041 Class DS, sanitized anti-microbial treatment with resilient waterproof backing , anti static requirements. The carpet must carry a seal of approval from British Allergy Foundation for reducing the growth of dust mite populations. the items is complete respect as per specifications. | 1165.48 | sqm. | |
62 | 62 | Providing and laying 12 mm thick laminate wooden flooring ( AC5) with double locking system on 3mm thick foam for noise reduction. Wooden planks having mehlamine impregnated decorative film of HDF density (water & fireresistant) to be laid complete in all respects as per manufacturer's specifications. | 105.59 | sqm. | |
63 | 63 | Providing & Fixing of ( weld free, component base) System glass Railing fixed with SS Balustrade 304 grade Size 50 x 10mm flat on SS plate size ( 150 x 150 x 6mm ) with SS Fastener’s and covered with SS cap of 304 grade & SS handrail 304 grade with 50mm dia(1.6mm thick) with Dorma Glass Fitting (Glass Links two ways Dorma Art no. 9180073) & 13.52 mm laminated, Toughened Glass & The balustrade C/C is 1100mm to 1250mm. The Ht. of the handrail 1050mm from FFL. complete in all respects as per architectural drawing and as per the direction of the Engineer-in-charge. All the material of handrail, balustrade and components should be of SS 304 grade satin finish. | 539.6 | sqm. | |
64 | 64 | Providing & fixing Vertical Linear Baffle Ceiling made out of Aluminum Extrusion made of Aluminum alloy grade 6063. The baffle blade shall be size of 100x 30 x3000mm in powder coated finish of approved shade or wood grain finish. The baffle blade shall be suspended using C-channel/ Slotted U-profile powder coated to black color at an on-center spacing of 100 mm/150mm. | |||
65 | 65 | The C-Channel/U 40x40x3000mm profile shall be suspended at every 1200mm on-centre using 8mm threaded rod from the structural soffit at every 1200mm intervals using U-profile hanger/C-channel hanger. Multiple lengths of U-profile/C-channel shall be connected using U-profile connector/ C-channel connector. The baffle blades shall be suspended from the C-channel/U-profile carrier bars at the required intervals (100mm) using baffle hangers. Spacing between blades shall be adjusted using the slots in carrier (Ceiling area to be measured for payment). | 1679.78 | Sqm. | |
66 | 66 | Ceres Glass Fibre Tiles for ceiling | |||
67 | 67 | Providing & Fixing of Soft Fiber Acoustical Suspended Ceiling System – DEXUNE/ ECOPHON/OREO ACOUSTIC BLOK CERES GLASS FIBRE MICROLOOK EDGE TILES WITH 15 mm EXPOSED GRID. The tiles should have Humidity Resistance (RH) of 95%, NRC 0.90, Light Reflectance >84% with Fire Resistance in module size of 600 X 600 X 15 mm. The grid should be of Dexune make 15mm BLACK GROOVE grid sections i.e. the Main Runner 3000mm in 38mm web height, 1200 mm & 600 mm Cross Tees in web height of 38mm. \nINSTALLATION: To comprise main runner spaced at 1200mm centre securely fixed to the structural soffit using suspension system at 1200mm maximum centre. The First/Last suspension system at the end of each main runner should not be greater than 450mm from the adjacent wall. Flush fitting 1200mm long cross tees to be interlocked between main runners at 600mm centre to form 1200 x 600 mm module. Cut cross tees longer than 600mm require independent support. 600 x 600mm module to be formed by fitting 600mm long flush fitting cross tees centrally between the 1200 mm cross tees. Perimeter trim to be wall angles of size 3000x19x19mm, secured to walls at 450 mm maximum centres and as per the drawing and the work complete in all respects to the satisfaction of Engineer in-charge. | 274.26 | Sqm | |
68 | 68 | Designing, fabricating, testing, protection, installing and fixing in position semi (grid) unitized system of structural glazing (with open joints) for linear as well as curvilinear portions of the building for all heights and all levels, including:\n(a) Structural analysis & design and preparation of shop drawings forthe specified design loads conforming to IS 875 part III (the systemmust passed the proof test at 1.5 times design wind pressurewithout any failure), including functional design of the aluminumsections for fixing glazing panels of various thicknesses, aluminiumcleats, sleeves and splice plates etc. gaskets, screws, toggles,nuts, bolts, clamps etc., structural and weather silicone sealants,flashings, fire stop (barrier)-cum-smoke seals, microwave curedEPDM gaskets for water tightness, pressure equalisation & drainage and protection against fire hazard including:\n(b) Fabricating and supplying serrated M.S. hot dip galvanised / Aluminium alloy of 6005 T5 brackets of required sizes, sections and profiles etc. to accommodate 3 Dimentional movement for achieving perfect verticality and fixing structural glazing system rigidly to the RCC/ masonry/structural steel framework of building structure using stainless steel anchor fasteners/ bolts, nylon seperator to prevent bimetallic contacts with nuts and washers etc. of stainless steel grade 316, of the required capacity and in required numbers.\n\n | |||
69 | 69 | (c) Providing and filling, two part pump filled, structural silicone sealant and one part weather silicone sealant compatible with the structural silicone sealant of required bite size in a clean and controlled factory / work shop environment, including double sided spacer tape, setting blocks and backer rod, all of approved grade, brand and manufacture, as per the approved sealant design, within and all around the perimeter for holding glass.\n(d) Providing and fixing in position flashings of solid aluminium sheet1 mm thick and of sizes, shapes and profiles, as required as perthe site conditions, to seal the gap between the building structureand all its interfaces with curtain glazing to make it watertight.\n\n | |||
70 | 70 | ( e) Making provision for drainage of moisture/ water that enters the curtain glazing system to make it watertight, by incorporating principles of pressure equalization, providing suitable gutter profiles at bottom (if required), making necessary holes of required sizes and of required numbers etc. complete. This item includes cost of all inputs of designing, labour for fabricating and installation of aluminium grid, installation of glazed units, T&P, scaffolding and other incidental charges including wastages etc., enabling temporary structures and services, cranes or cradles etc. as described above and as specified. The item includes the cost of getting all the structural and functional design including shop drawings checked by a structural designer, dully approved by Engineer-in-charge. The item also includes the cost of all mock ups at site, cost of all samples of the individual components for testing in an approved\nlaboratory, field tests on the assembled working structural glazing as specified, cleaning and protection till the handing over of the building for occupation. In the end, the Contractor shall provide a water tight structural glazing having all the performance characteristics etc. all complete as required, as per the Architectural drawings, as per item description, as specified, as per the approved shop drawings and as directed by the Engineer- in-Charge. | |||
71 | 71 | (f) Providing and supplying aluminium extruded tubular and other aluminium sections as per the architectural drawings and approved shop drawings , the aluminium quality as per grade 6063 T5 or T6 as per BS 1474,including super durable powder coating of 60-80 microns conforming to AAMA 2604 of required colour and shade as approved by the Engineer-in-Charge. ( The item includes cost of material such as cleats, sleeves, screws etc. necessary for fabrication of extruded aluminium frame work. Nothing extra shall be paid on this account). The weight of aluminium extruded section shall be taken for purpose of payment. | 607 | Sqm | |
72 | 72 | Providing and fixing 13.52 mm thick laminated toughened glass in roofing complete in all respects as per architectural drawing and direction of the Engineer-in-charge. (The frame work will be paid separately under the relevant item). | 607 | Sqm | |
73 | 73 | Providing and fixing of 6mm thick approved make to be tempered lacquered glass, approved color , fixed with neutral silicon / double sided tape on a perfectly leveled 12mm thick water proof marine plywood which is mounted on the RCC wall/any other structure by suitable means as approved by Engineer in charge complete in all respect | 254.9 | Sqm | |
74 | 74 | SINGLE GLAZED TOUGHENED GLASS PARTITIONS - WITH ALEXA SYSTEM-45 FRAME PROFILES | |||
75 | 75 | Supply and Fixing of Slim Glass partition of 10mm Toughened Glass using DORMA Alexa System-45 or equivalent Frames clip profile to a height of maximum 3m or as per drawing.The Fixed glass to be fixed using DORMA Alexa BP45 Profiles at Top & Bottom & Alexa fixed frame cleat . The profile size to be 45x25MM to be fixed on to the floor/ ceiling as per the architect design. DORMA Alexa or equivalent H Junction profile to be used at all Glass to Glass vertical joints, 90 Deg L Junction Profiles and T Junction profiles necessary as per design.In case of Glass overall panel Alexa MP45 & BP45 Overpanel Profile to be used.\nThe Alexa profiles shall be suitable for Glass thickness of 10 mm .The Profile shall be matt natural anodized, the Profile Manufacturer to supply all the necessary clips, seals and fixing accessories for the system.\nAll Profiles to be with 2 mm Gauge thickness Excluding 20 Micron of Anodizing.\nThe work be executed as per manufacturer's specifications and as per the direction of the Engineer-in-charge.\nApproved Manufacturer: Profiles/Frames: DORMA (Crown) / Schuco / D-Line\nGlass : Saint Giobain/Asahi/ PIlkington | 1482.6 | Sqm | |
76 | 76 | GLASS DOOR - WITH ALEXA SYSTEM-45 FRAME PROFILES & OFFICE HINGES | |||
77 | 77 | Supply & Fixing of Glass Door (Single leaf) of 10mm toughened glass with DORMA Alexa System-45 or equivalent frames all around the door with complete assembly . Alexa DP45 Door Profile frame of size 45X50mm with seals with DORMA or equivalent Junior Office Hinges (3nos) & Studio Gala Locks (1no) & Studio Gala lever handles in aluminium silver (EV1) finish , Euro profile cylinder and Door closer with slide channel and Hold Open Unit (as per EN 1154) and saddle plate for fixing on the Glass door and necessary seals to be provided all around the door frames.\nThe Alexa profiles shall be suitable for Glass thickness of 10mm .The Profile shall be matt natural anodized, the Profile Manufacturer to supply all the necessary clips, seals and fixing accessories for the system.\nAll Profiles to be with 2 mm Gauge thickness Excluding 20 Micron of Anodizing.\nThe work be executed as per manufacturer's specifications and as per the direction of the Engineer-in-charge.\nApproved Manufacturer: Profiles/Frames: DORMA (Crown) / Schuco / D-Line\nGlass : Saint Giobain/Asahi/ PIlkington | |||
78 | 78 | - | 662.4 | Sqm | |
79 | 79 | Door Closer: Providing and fixing fire rated door closer of makes Dorma's TS 93 / Brition's LCN1460/Marshall MH-DC-S-14016 (3-4) extruded aluminimum body heavy duty 2 hrs fire rated door closer tested from CBRI Roorkee as per IS : 3614 Part -II and BS : 476 Part 20& 22 from CBRI Roorkee along with wooden /glazed / metal fire doors. The door closer shall be of type 3-4, non-handed having back check function, ANSI/BHIMA certified, and comples with EN 1154 for 100000 cycles. The door closer shall have a 10 year mechanical guarranty / warranty from the manufacturer and the same shall be submitted to the Engineer -in-charge. | 20 | Each | |
80 | 80 | PANIC BAR:Providing and fixing Stainless steel 304 grade fire rated touch type panic bar from Marshall MH -PB - SS -11001-03/ Dorma PHA 2000-1 PHA 2003/ Von Duprin CX 98 tested in accordance with IS : 3614 Part - II and BS : 476 Part 20 & 22 from CBRI Roorkee for 2 hrs fire rating along with the wooden fire doors as a complete assembly. The manufacturer shall provide a minimum guarantee / warranty for 5 years against any manufacturing defects | 10 | Each | |
81 | 81 | OUTSIDE ACCESS DEVICE (TRIM): Providing and fixing outside access device 304 grade external trim (Latch & Lock) with 3 keys for panic bar of approved make Marshall MH-PB- SS- 11002 SS / Dorma 's PHX 03 / Von Duprin's CX 98 series for wooden /glazed / metal fire doors all complete as per manufacturer's specifications, approved drawing and direction of the Engineer- in- charge. (for all exits / staircases) | 10 | Each | |
82 | 82 | DEAD LOCK: Providing and fixing Mortise Dead Lock with 80mm both side key cylinder of Dorma’s 288 Series/Briton’s EL 2010/Marshall’s MH-L-13002 SSS European standard satin stainless finish tested to 100000 cycles of approved make and tested along with the Wooden /glazed / metal fire doors for 2 hrs. fire rating from CBRI Roorkee. | 23 | Each | |
83 | 83 | D- TYPE HANDLE: Providing and fixing stainless steel D- Type back to back pull handle of size 300mm long and 22mm dia of make Dorma’s TGDID/Briton’s E series / Marshall’s 304 grade with complete roses and studs for fixing complete as per direction of engineer-in-charge. | 23 | Pair | |
84 | 84 | TOWER BOLT: Providing and fixing304 grade Stainless Steel exposed Tower Bolt of size 10mm dia rod and 300 mm long Dorma’s 9114306 , Briton’s DAL FBH 6, Marshall’s MS 300 with complete screws. | 66 | Each | |
85 | 85 | DOOR STOPPER : Providng & fixing of SS 304 grade foot stamped door stopper . | 20 | Each | |
86 | 86 | Extra for providing toughening to glass complete in all respects as per manfactuers specifications and as per the directions of Engineer -in- charge. | 42.66 | Sqm | |
87 | 87 | Providing and Fixing 22 mm thick Polycarbonate sheet roofing for Skylight: Design, Manufacture and Installation of skylight system, a complete assembly of extruded cellularstructure UV protected polycarbonate panels incorporated with angular daylighting concept with moon light effect into a complete system. Co-extruded UV protected polycarbonate panel system of minimum 22 mm thickness to ensure best performance for wind uplift and visual appearance. Panels shall be manufactured with vertical offset standing seam at both sides of the panel. Panels shall be of The width of the panels shall be minimum 900 mm-1200mm and panels with maximum width shall be preferred to minimize junctions and to ensure a leak proof system. Panels shall have minimum six to seven layers for better strength with translucent opaque combination of layers with truss bracing cell structure. Panels shall be fixed on Purlins with SS Trapezoidal Fasteners / Aluminum spacers and connected special AluminiumU connectors to interlock the panels with snap on / click-on / grip lock mechanism to ensure maximum uplift capacity. Panels will be sealed with mill finished aluminiumU profiles at the ends. Polycarbonate panels also shall have Yellowness Index as per ASTM D 1925 when tested on a sample exposed to UV for 500 Hours as per ASTM G 155. The polycarbonate panels must satisfy Dart drop impact test as per IS 14443-97 shall show no sign of breakage on Polycarbonate sheets which have been exposed to UV for a min. of 500 Hours as per ASTM G 155. Uvalue of the panels shall not be more than 1.8 watt/M2K as per EN ISO 1077-2:2018\nThe panels shall be fixed over structural steel / MS purlins already fixed and be secured with Snap-On connectors at all levels including all accessories like screws, trims etc. complete to make a water tight skylight system conforming to specifications and directions of Engineer-in-Charge.\nEnd-cap/Aluminium U-profile (mill finish) for ends.\n\n | 900 | Sqm | |
88 | 88 | WOODEN SLATS GROOVED ACOUSTICAL PANEL | |||
89 | 89 | Providing and fixing ECOPHON/ DEXUNE/ HARA DESIGN Slats. Wood Based panels with lineal perforations. The panels shall be non fr grade with melamine laminate panels 2440mm x 128mm x15mm with 2mm grooved at 15 mm pitch, Tongue and Groove edges for seamless mounting having density of 800kd/m3. The back of the panels are perforated with 10mm diameter circular hole with a nonwoven fabric of 0.2mm for providing absorption. Panel is to be fixed on strut keen 18 frame work. The cavity of framework should be with rock wool with 24kg and 25mm density if required and alongwith all accessories and direction of Engineer in charge. The panelling work shall be done in all respects as per detailed drawings. The panelling should be properly done in proper alignment over the stud and Floor channel to cover all beams and cavity of hollow spaces and level as per satisfaction engineer in charge all complete for all height and level. | 56.46 | Sqm | |
90 | 90 | Acoustical Wall Panel | |||
91 | 91 | Providing and supplying DEXUNE/ ECOPHON/ ACOUSTICBLOCK/ MUROTECH Acoustical Wall Panel’ with square edges made of fibre glass substrate 25mm thick and wrapped on the front side with an acoustically transparent and fire-resistant fabric with an option of colours as per the choice of the Architect/ Person in-charge of size 2100x600 or 600x600 mm providing a minimum sound absorption level of 0.90 NRC to be affixed to wall using Wall panel impalers supplied by Dexune and construction adhesives as per the instructions laid down by the manufacturer. \nINSTALLATION:\nWall panel impalers of adequate quantity as specified by the manufacturer shall be fixed to the wall surface using self tapping screws. Silica based construction adhesive shall be dabbed on to the projecting elements (spikes) of the impalers. Wall panels shall be pierced through the spikes of the impalers ensuring the line and level of the panels are maintained. | 425.49 | Sqm | |
92 | 92 | Providing and fixing door lock to frameless glass door shutter complete in all respects as per site requirement and as per directions of the Engineer-in-charge. | 14 | Each | |
93 | 93 | B.WALL | |||
94 | 94 | Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size,\napproved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement,mixed with matching pigment, epoxy touch ups, including rubbing, curing,\nmoulding and polishing to edges to give high gloss finish etc. complete at all levels. | |||
95 | 95 | - | 133.52 | Sqm | |
96 | 96 | Providing edge moulding to 18 mm thick marble stone counters, Vanitiesetc., including machine polishing to edge to give high gloss finish etc.complete as per design approved by Engineer-in-Charge. | |||
97 | 97 | - | 1888.04 | Metre | |
98 | 98 | Providing and fixing stainless steel ( Grade 304) railing made of Hollowtubes, channels, plates etc., including welding, grinding, buffing,polishing and making curvature (wherever required) and fitting thesame with necessary stainless steel nuts and bolts complete, i/c fixingthe railing with necessary accessories & stainless steel dashfasteners , stainless steel bolts etc., of required size, on the top of thefloor or the side of waist slab with suitable arrangement as per approvalof Engineer-incharge, (for payment purpose only weight ofstainless steel members shall be considered excluding fixingaccessories such as nuts, bolts,fasteners etc.). | |||
99 | 99 | Total (a+b) | 1238.61 | Kg | |
100 | 100 | Providing & fixing jaislmer stone 17mm to 19 mm thick in flooring, riser of steps, skirting, dado, pillars and wall lining including matching grains of marble laid in any pattern as specified over base of 12 mm thick cement coarse sand mortar 1:3. Jaiselmer stone complete in all respect as per approved NS. | |||
101 | 101 | - | 123.24 | Sqm | |
102 | 102 | Providing and fixing stainless steel Gate 4.50 mm Wide ( Grade 304) gate made of Hollow tubes, channels, plates etc., including fixing the gate welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, with suitable arrangement as per approval of Engineer-incharge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). | |||
103 | 103 | 4.50 Wide | 3 | Each | |
104 | 104 | Supplying, installation, testing & commissiong Automatic Sliding Gate system complete in all respects as per site requirement and direction of Engineer-in-charge. | |||
105 | 105 | ROAD WORK | |||
106 | 106 | Providing and applying tack coat using bitumen emulsion conforming to IS:8887, using emulsion pressure distributer including preparing the surface & cleaning with mechanical broom. | |||
107 | 107 | With rapid setting bitumen emulsion | |||
108 | 108 | On W.B.M / W.M.M. @ 0.4kg/sqm | 4019.64 | Sqm | |
109 | 109 | On bituminous surface @ 0.25kg/sqm | 4019.64 | Sqm | |
110 | 110 | 2.5 cm premix carpet surfacing with 3 cum of stone chippings 10\nmm nominal size per 100 sqm and bitumen emulsion (medium setting min. 65% bitumen contents) complying with IS : 8887, using 96 kg per cum of chippings of road surface, including consolidation with road roller etc complete . | 4019.64 | Sqm | |
111 | 111 | Providing and laying Bitumen Penetration Macadam with hard stone aggregate of quality, size and grading as specified, with bitumen of suitable penetration grade, including required key aggregate as specified, spreading coarse aggregate with the help of self propelled/ tipper tail mounted aggregate spreader and applying bitumen by a pressure distributor and then spreading key aggregate with the help of aggregate spreader complete, including consolidation with road roller of minimum 8 to 10 tonne capacity to achieve specified values of compaction and surface accuracy : | |||
112 | 112 | For 50mm compacted thickness using coarse aggregate\nof size 50-20 mm graded @ 0.60 cum per 10 sqm key\naggregate of size 12.5 mm graded @ 0.15 cum per 10\nsqm. With paving asphalt grade VG - 10 @ 50 kg/ 10 sqm. | 4019.64 | Sqm | |
113 | 113 | Providing and laying seal coat of premixed fine aggregate ( passing 2.36 mm and retained on 180 micron sieve) with bitumen using 128 kg of bitumen of grade VG - 10 bitumen per cum of fine aggregate and 0.60 cum of fine aggregate per 100 sqm of road surface, including rolling and finishing with road roller all complete. | 4019.64 | Sqm | |
114 | 114 | Construction of granular sub-base by providing close graded Material conforming to specifications, mixing in a mechanical mix plant at OMC, carriage of mixed material by tippers to work site, for all leads & lifts, spreading in uniform layers of specified thickness with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per specifications and directions of Engineer-in-Charge. | |||
115 | 115 | With material conforming to Grade-II (size range 53 mm to 0.075 mm ) having CBR Value-25 | 864.33 | Cum | |
116 | 116 | Providing, laying, spreading and compacting graded stone aggregate (size range 53 mm to 0.075 mm ) to wet mix macadam (WMM) specification including premixing the material with water at OMC in for all leads & lifts, laying in uniform layers with mechanical paverfinisher in sub- base / base course on well prepared surface and compacting with vibratory roller of 8 to 10 tonne capacity to achievethe desired density, complete as per specifications and directions of Engineer-in-Charge. | 864.33 | Cum | |
117 | 117 | UG TANK | |||
118 | 118 | Pipe Sealing | |||
119 | 119 | Sealing surrounding of pipe by High strength repair mortar using a flowable, single-component, polymer-modified, cementitious repair mortar containing silica fume and a migratory corrosion inhibitor, capable of full depth repairs”. Material, only Required the addition of water, to produce high strength material, which is easy to use with an extended working time for ease of placement, and it make joints watertight which are prone to water attack, permanently.The application shall be in accordance with the manufacturer's instructions and as per the direction of the Engineer-in-charge | |||
120 | 120 | Water tank | 8 | Each | |
121 | 121 | OUTSIDE WATERPROOFING FOR HORIZONTAL SURFACE WITH HDPE MEMBRANE | |||
122 | 122 | Providing and laying leed certified complying salt water grade of HDPE with combination of bentonite composite membrane having >500% elongation as per ASTM D412 TypeIV, Puncture resistance (load) 498.2N as per ASTM E154, Hydrostatic resistance >0.7Mpa as per ASTM D5385 & 26mpa tensile. Cleaning of the surface from dust mortar splashes and loosely adhering particles from PCC. Repairing of cracks and honey combing with rich polymer modified mortar i.e. 1: 3 (cement: sand) mortar admixed with SBR Latex or equivalent confirming to ASTM C 1059-86, where consumption @ 20 % by weight of cement over a bond coat of SBR Latex mixed with cement in 1: 1 ratio (1 part SBR Latex mixed with 1 part cement by volume. The waterproofing system must also allow for installation over green or damp surfaces to accelerating the construction process. The bentonite should have capability of expanding up to 8 times than its original thickness to stop water ingress in case of any damage due to construction activity. \nTermination to be done at minimum 1 mtr above at vertical walls with 10mmX20mm groove, which should be filled with PU sealant with Shore A hardness should be 25 according to ASTM C 661 and movement capability should be +/- 35%, even satisfy ASTM C 920 Type S, Grade NS, Class 35, Use NT, M, A and O•ASTM C 1248 • U.S. Federal Specification TT-S-00230C Class A, Type II•CAN/CGSB 19.13-M87. \nThe application shall be in accordance with the manufacturer's instructions and as per the direction of the Engineer-in-charge. Work should be done by authorized and recommended applicator only by manufacturer. | |||
123 | 123 | Water tank base | 88.4 | Sqm | |
124 | 124 | PROTECTION SCREED- 20MM | |||
125 | 125 | Providing and laying protection screed of M20 Grade Where screed must be admixed with Waterproofing Compound at the rate of 200 ml per bag of cement of where Integral compound confirms IS 2645, IS 9103 for working out a smooth finish. The screed shall be laid on top of the non-woven geotextile layer to protect the waterproofing built-up from mechanical damage. The screed shall have a minimum thickness of 25m. The screed shall be cured by ponding for a minimum of 2 days. | |||
126 | 126 | Water tank base | 88.4 | Sqm | |
127 | 127 | OUT SIDE VERTICAL SURFACE WATERPROOFING- TWO COMPONENT SPRAY APPLIED POLYUREA FOR | |||
128 | 128 | Providing and applying two component spray applied polyurea for vertical walls followed by Surface preparation by mechanical means using hand grinding machines for providing CSP3-CSP4 profile according to International Concrete Repair Institute Guideline No. 03732. \nPriming of surface with two component high density and high performance epoxy primer coating with excellent bonding on to concrete surface. Product Pot life of epoxy should be 18min, Practical cure- 12hrs, Shore D Hardness-80, Tensile strength should not be less than 55MPa, Bond Strength Greater than cohesive strength of 25 N/mm2 concrete. >1.5 MPa or concrete failure. The application of epoxy primer shall be with lambskin short pile roller.\nTop layer shall be with Spray Applied Polyurea for 1.5mm thickness with plural gun spray machine. Polyurea should be two component system with elastic and high crack-resistant properties, even at very low temperatures. The mixed product should have the following features and benefits : \n•\tMonolithic with no laps, welds or seams, fully bonded system\n•\t100% solid content , Tensile strength > 25MPa , elongation- 380% , shoreA hardness 92, shore D-45, gel time-3sec tack free-7sec. The supply and apply shall be in accordance with the manufacturer's instructions and as per the direction of the Engineer-in-charge. Work shall be carried out by the authorized applicator of company. | 265.86 | Sqm | |
129 | 129 | OUTSIDE TERMINATION DETAILING | |||
130 | 130 | Termination of water proofing layer shall be at minimum 300mm above the ground level of waterproofing at vertical walls with 10mmX10mm groove, which should be filled with polyuria along with PU sealant, with Shore A hardness of 25 according to ASTM C 661 and movement capability should be +/- 35%, satisfy ASTM C 920 Type S, Grade NS. Sealing point shall be protected and supported by aluminium 50mm plates (1mm thick) all around the periphery of walls as per drawings. The supply and apply shall be in accordance with the manufacturer's instructions and as per the direction of the Engineer-in-charge. Work shall be carried out by the authorized applicator of company. | 42.88 | Sqm | |
131 | 131 | PROTECTION DRAIN BOARD | |||
132 | 132 | Protection need to done with Providing and fixing Drain board of any branded organization as protection board for waterproofing which is high strength one side dimpled structure, light in weight yet flexible strong and resilient. Product should be High Density Polyethylene (HDPE) draining system with 8 mm dimples, which helps in fast and efficient drainage of surplus water and controls soil erosion, protects construction, allows water to drain while reducing water table pressure. It is mainly used for, vertical / horizontal drainage, soil erosion control, and protects the main waterproofing layer | |||
133 | 133 | Water tank base | 88.4 | Sqm | |
134 | 134 | Providing and mixing integral crystalline admixture for waterproofing treatment to RCC structures like basement raft, retaining walls, reservior, sewage & water treatment plant, tunnels / subway and bridge deck etc. at the time of transporting of concrete into the drum of the ready-mix truck, using integral crystalline admixture @0.80% (minimum) to the weight of cement content per cubic meter of concrete) or higher as recommended by the manufacturer's specification in reinforced cement concrete at site of work. The material shall meet the requirements as specified in ACI-212-3R-2010 i.e. by reducing permeability of concrete by more than 90%, compared with control concrete as per DIN 1048 and resistant to 16 bar hydrostatic pressure. The crystalline admixture shall be capable of self-healing of cracks up to a width of 0.50mm. The work shall be carried out all complete as per specification and the direction of the Engineer-in-charge. The product performance shall carry guarantee for 10 years against any leakage. | 666 | Kg | |
135 | 135 | Providing and applying integral crystalline slurry of hydrophilic in nature for waterproofing treatment to the RCC structures like retaining walls of the basement, water tanks, roof slabs, podiums, reservior, sewage & water treatment plant, tunnels / subway and bridge deck etc., prepared by mixing in the ratio of 5 : 2 (5 parts integral crystalline slurry : 2 parts water) for vertical surfaces and 3 : 1 (3 parts integral crystalline slurry : 1 part water) for horizontal surfaces and applying\nthe same from negative (internal) side with the help of synthetic fiber brush. The material shall meet the requirements as specified in ACI- 212-3R-2010 i.e by reducing permeability of concrete by more than 90% compared with control concrete as per DIN 1048 and resistant to 16 bar hydrostatic pressure on negative side. The crystalline slurry shall be capable of self-healing of cracks up to a width of 0.50mm. The work shall be carried out all complete as per specification and the direction of the engineer-in-charge. The product performance shall carry guarantee for 10 years against any leakage. | |||
136 | 136 | For vertical surface two coats @ 0.70 kg per sqm | 288.62 | Sqm | |
137 | 137 | For horizontal surface one coat @1.10 kg per sqm. | 88.4 | Sqm | |
138 | 138 | Providing and applying integral crystalline dry shake of hydrophilic in nature for waterproofing treatment to the RCC structures like basement raft, foundation slab, sewage & water treatment plant slab, warehouses floor, parking structures and water tank base slab etc. sprinkled @ 0.60kg per sqm or higher as recommended by the manufacturer's specification over the lean concrete of above cited structures. The material shall meet the requirements as specified in ACI-212-3R-2010 i.e. by reducing permeability of concrete by more than 85%, compared control concrete as per DIN 1048 and resistant to 16 bar hydrostatic pressure on negative side. The crystalline dry-shake shall be capable of self-healing of cracks up to a width of 0.50mm. The work shall be carried out all complete as per specification and the direction of the engineer-incharge. The product performance shall carry guarantee for 10 years against any leakage. | |||
139 | 139 | Water Tank Base | 88.4 | Sqm | |
140 | 140 | Providing and applying crystalline mortar by mixing in the ratio of 4.5 : 1 (4.5 parts crystalline mortar : 1 part water) for the treatment of faulty construction joints, cracks, tie rod holes and spalled & honeycombed surface of RCC underground structures like basement,\nwater tanks, bridge deck etc. to ensure water tightness. The crystallie mortar shall conform to the EN 1504-3 having compressive strength Class R4 > 45 MPa and adhesive bond strength Class R3 > 1.5 MPa. The work shall be carried out all complete as per specification and the direction of the Engineer-In-Charge. The product performance shall carry guarantee for 10 years against any leakage. | |||
141 | 141 | For patching of tie rod holes, preparing tie rod hole surface and then priming the area with integral crystalline slurry @0.070kg per sqm and while the surface is tacky, repairing and then filling the tie rod holes with crystalline mortar @0.040kg per hole. The crystalline mortar shall be tightly rodded into tie rod holes or packed tightly (For 25x25x25 mm tie rod hole, use 0.040 kg to fill the hole) | |||
142 | 142 | Tie rod holes | 335 | Each Hole | |
143 | 143 | Providing and applying of swellable type water stop tape, 19mm x 25mm thick in linear meter (expansive nature) for construction joints treatment of RCC structure such as raft slab, retaining walls, water storage tank and at the junctions of raft slab with the retaining walls etc.. After cleaning the surface, one coat of required primer for swellable water stop tape shall be applied throughout the length of the joint @3.78 litre per 240 running meter. Over the primed surface swellable type water stop tape shall be placed. The work shall be carried out all complete as per specification and the direction of the Engineer-In-Charge. The product performance shall carry guarantee for 10 years against any leakage. | |||
144 | 144 | LANDSCAPING | |||
145 | 145 | Preparation of beds for hedging and shrubbery by excavating 60 cm deep and treching the excavation base to a further depth of 30 cm, refilling the excavation earth after breaking clods and mixing with sludge or manure in the ratio of 8:1 (8 part od stacked volume of earth reduction by 20%: one part of stacked volume of sludgs or manure after reduction by 8%), flooding with water, filling with earth if necessary, watering and finally fine dressing, leveling etc. including stacking and disposal of materials declared unserviceable and surplus earth by spreading and leveling as direction, within a lead of 50 m, lift up to 1.5 m complete (cost of sludge, manure or extra earth to be paid for separately) | 149.14 | Cum | |
146 | 146 | Supply, stacking and plantation of following trees complete at site: - | |||
147 | 147 | Plumeria Alba | 503 | Each | |
148 | 148 | Polyalihia Longifolio | 30 | Each | |
149 | 149 | Lantana Selowiana | 397 | Each | |
150 | 150 | Chukrassia Tabularis | 15 | Each | |
151 | 151 | Asparagus Sprangeri | 463 | Each | |
152 | 152 | Sterculia Alata | 5 | Each | |
153 | 153 | Euphorbia Millie | 90 | Each | |
154 | 154 | Jacaranda Nimosaefolia | 20 | Each | |
155 | 155 | Durenta Goldiana | 2789 | Each | |
156 | 156 | Lagerstroemia Rosea | 15 | Each | |
157 | 157 | Wadelia Trilobata | 958 | Each | |
158 | 158 | Grevillea robusta | 25 | Each | |
159 | 159 | Golden Bottle Brush Topiary | 10 | Each | |
160 | 160 | Casurina Aquisitifolia | 1 | Each | |
161 | 161 | Cassia fistula | 25 | Each | |
162 | 162 | Clerodendron Inerme | 818 | Each | |
163 | 163 | Raphis Palm | 21 | Each | |
164 | 164 | Areca Catechu | 53 | Each | |
165 | 165 | Sterculia Alata | 3 | Each | |
166 | 166 | Hibiscus rosasinensis | 68 | Each | |
167 | 167 | Delonix regia | 30 | Each | |
168 | 168 | Ficus Panda | 397 | Each | |
169 | 169 | Plumbago Capansis | 120 | Each | |
170 | 170 | Hamelia Pentans | 77 | Each | |
171 | 171 | Juniprus Chinensis | 19 | Each | |
172 | 172 | Pilea CaderII | 249 | Each | |
173 | 173 | Royal Palm | 25 | Each | |
174 | 174 | Thuja occiventalis | 30 | Each | |
175 | 175 | Jasminum sambac | 25 | Each | |
176 | 176 | Turfing of lawn with planting of selection No.1 superior quality grass with machinery including ploughing the land, levelling and dressing, applying farm yard manure in 2.5cm layer, application of insecticide/ pesticide to safe guard against soil borne disease. | 3000 | Sqm | |
177 | 177 | Supply of good earth free from all types of weed roots stones,bajri & malwa etc. | 600 | Cum | |
178 | 178 | PUBLIC HEALTH | |||
179 | 179 | Providing and laying S&S Centrifugally Cast (Spun) / Ductile Iron Pipes conforming to IS : 8329 : | |||
180 | 180 | 100 mm dia Ductile Iron Class K-7 pipes | 578 | Mtr. | |
181 | 181 | Providing orange colour safety foot rest of minimum 6 mm thick plastic encapsulated as per IS : 10910, on 12 mm dia steel bar conforming to IS: 1786, having minimum cross section as 23 mmx25 mm and over all minimum length 263 mm and width as 165 mm with minimum 112 mm space between protruded legs having 2 mm tread on top surface by ribbing or chequering besides necessary and adequate anchoring projections on tail length on 138 mm as per standard drawing and suitable to with stand the bend test and chemical resistance test as per specifications and having manufacture's permanent identification mark to be visible even after fixing, including fixing in manholes with 30x20x15 cm cement concrete block 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) complete as per design. | 24 | Each | |
182 | 182 | Drilling/Boring of 16" i/d (400mm) dia bore by with reverse rig/direct rotary rig method in all kinds of soil including cost of consumable stores, fuel, oil soil stabilizing material and transportation reg to the side of the proposed bore. Logging with electronic legger etc. to complete the bore. | 185 | Mtr. | |
183 | 183 | Providing and lowering of 8" i/d (200mm dia)PVC pipe LCG super / johonson slotted Pipe 1.0 mm thick duly ISI marked complete in all respects. | 185 | Mtr. | |
184 | 184 | Supply and packing of pea gravel 3 to 6mm size in the bore complete in all respects to complete satisfaction of E.I.C. | 150 | Cum | |
185 | 185 | Development of the tubewell with the helpt of Air Compressor Limit of required capacity as directed by the E.I.C. including the cost of all consumable stores, fuel, oil and other tools and plants. | 30 | Hour | |
186 | 186 | Providing and fixing of M.S.Clamps 12mmor 1/2" thick plate/flat complete in all respects. | 2 | Each | |
187 | 187 | Providing and fixing of M.S.bail plug to 8"(200mm) nominal bore complete in all respects. | 2 | Each | |
188 | 188 | Providing and fixing floor hung/mounted, white vitreous china single piece, water closet with PP soft close seat cover, hinges, accessories set product code CNS-WHT-963NS Size : 370x510x360mm with Control Plate Opal product code JCP-CHR-152415 and single piece slim concealed cistern with wall mounting frame, installation kit & "S"-Type" drain pipe connection set product code JCS-WHT-2400WS & Rack Bolt (Stainless Steel) product code: ZPS-SNS-RB01 complete in all respect as per directions of Engineer-in-Charge. (Make Jaquar) | 132 | Each | |
189 | 189 | Providing and fixing white vitreous battery based infrared sensor operated urinal of approx size 480x300x740 mm having pre & post flushing with water (250 ml & 500 ml consumption), having water inlet from back side, Sensotronic Sensor Flushing Valve for Urinal with complete fittings (Suitable for Urinal URS-WHT-13255) and Sensor Product code SNR-CHR-51097 including fixing to wall with suitable brackets all as per manufacturers specification and direction of Engineer-in-charge. (Make Jaquar) | 45 | Each | |
190 | 190 | Providing and fixing white vitreous china ware white colour under counter wash hand basin with fixing accessories set product code: FLS-WHT-5701 size 555 x 425 x 195mm shape oval, chair type adjustable brackets, jaquar make waste coupling 32mm size half thread with 130mm height including the cost of cutting granite for WHB including plugs, screws,white cement, complete in all respects. (Make Jaquar) | 142 | Each | |
191 | 191 | Providing and fixing hand shower (Health Faucet) with 8mm dia 1.2 meter long flexible tube and wall hook product code : ALD-CHR-573 to wall hung type W.C and make as approved by EIC. (Make Jaquar) | 132 | Each | |
192 | 192 | Providing and fixing Bottle Trap (with Internal Partition) 32mm Size with 300mm & 190mm Long Wall Connection Pipes & Wall Flange product code : ALD-CHR-769L300x190 and make as approved by EIC. (Make Jaquar) | 187 | Each | |
193 | 193 | Providing and fixing Angular Stop Cock/ Angle Valve for basin mixer and geyser points product code: CON-CHR-053KN complete in all respects. (Make Jaquar) | 770 | Each | |
194 | 194 | Providing and fixing Exposed Part Kit of Single Lever Basin Mixer Wall Mounted Consisting of Operating Lever, Wall Flange, Nipple & Spout product code: ORP-CHR-10233KPM (Suitable For Item ALD-233) including Concealed Body for Single Lever wall mounted Basin Mixer with Cartridge Sleeve and protection sleeve cover old, But without Exposed Parts product code: ALD-CHR-233PSO (Make Jaquar) | 142 | Each | |
195 | 195 | Providing and fixing long body bib cock with Wall Flange Product Code: CON-CHR-107KN.\n\n\n | 191 | Each | |
196 | 196 | Providing and fixing in position best Indian make vitreous Chinaware channel of size 600mm x 150mm including laying and fixing in cement concrete 1:2:4 complete as required by Engineer-in-charge. | 45 | Each | |
197 | 197 | Providing and fixing C.P. brass liquid soap container of best quality (as required by the Engineer-in-charge). | 105 | Each | |
198 | 198 | Supplying, installing, testing and commisioning of PVC mineral filled low noise pipes and fittings, with push fit rubber ring sockets pipes and fittings confirming to EN-12056, with density 1.9gm/cm3. Piping is to be suspended from ceiling level & fixed on ceiling with necessary fittings and cutting the pipe to the required length including short pieces, assorted fittings such as Plug / Plain Tee / Swept Tee with or without door, bends and elbows or any other standard fittings are included in the rate. The pipe should have B1 fire classification according to EN4102 and is hot water resistant up to 95°C for short term loading & 90°C long term loading and has chemical resitance of pH 2-12 and completly provides sound protection upto 10 dB at a flow rate of 2 LPS and giving water tightness test for all the piping (refer technical specifications for additional details.) The rate shall include chasing of walls, laying of pipes as per standard working procedures. | |||
199 | 199 | DN 75 mm o/d PP mineral filled SWR pipe | 1408 | Mtr. | |
200 | 200 | DN 110 mm o/d PP mineral filled SWR pipe | 798 | Mtr. | |
201 | 201 | Providing and fixing Brass Floor Clean Out plug with suitable insert keys for opening to soil pipe / waste pipe of uPVC pipe as required complete and direction by Engineer-in-charge: | 15 | Each | |
202 | 202 | Providing & Fixing Low Noise Multi Floor Trap with minimum 50mm water seal having 3nos of DN 50mm inlets and 1nos of DN 110mm Top inlet and 1nos of DN 75mm outlet. The baffle construction should be air tight under all circumstances. The inspection plug should enable to access the area under the baffle in order to inspect and clean the area. The Floor Trap volume should be in such a way that a maximal discharge capacity is reached. In case not all the inlets are used two PP-blind plugs are added to the Floor Trap. These blind plugs should secure a leakage free sealing of unused connections to the Floor Trap. Make: Poloplast, Wavin Astral (Silencio). | |||
203 | 203 | 110 x110 mm outlet | 412 | Each | |
204 | 204 | Unplasticised PVC pipe for Sewers | |||
205 | 205 | Providing and fixing U-PVC pipes for agriculture & water supply pipes conforming to IS 4985:2000 10 kg pressure without specials (cost of special will be excluded fom this rate) into trenches for all depths and laying out the same to correct alignment gradient, level etc. in trenches including all dressing & treimming and cutting of beds & joints holes, supporting the pipes and specials, in correct position in a suitable rigid manner while the same are being jointed complete. | |||
206 | 206 | 200 mm dia (Finolex/ Supreme/ Prince Make 10 kgf/sqcm pressure) | 467 | Metre | |
207 | 207 | Cutting, Jointing and fixing unplasticised PVC soil, waste pipes 10 kg pressure with solvent cementing/solvent welding method of permanently jointing plastic pipes using solvent cement, rapid metod of jointing uPVC pipe and testing the sewer lines for leakage and making all leakages and defects complete as per direction of Engineer In-Charge. | |||
208 | 208 | 200 mm dia uPVC pipe | 78 | Each | |
209 | 209 | Providing and laying cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) all-round unplasticised PVC pipes 10 kg pressures including bed concrete as per standard design: | |||
210 | 210 | 200 mm dia uPVC pipe | 467 | Metre | |
211 | 211 | Providing and laying cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) all-round unplasticised PVC pipes 10 kg pressures including bed concrete as per standard design: | |||
212 | 212 | 200 mm dia uPVC pipe | 467 | Metre | |
213 | 213 | Cutting, Jointing and fixing D.I class K-7 pipes and specials of various size ranging from 100mm to 200mm lowering them into trenches, laying & jointing with rubber tyton ring joint or with run lead caulked joints, construction of sluice valve, Fire Hydrant chamber etc. complete as per direction of Engineer In-Charge. | |||
214 | 214 | 100 mm dia Ductile Iron Class K-7 pipes | 55 | Each | |
215 | 215 | Providing and laying S&S C.I. standard specials such as tees, bends, collars, tapers, caps etc. (Heavy class): | |||
216 | 216 | Up to 300 mm dia | 6 | Each | |
217 | 217 | Providing and fixing C.I Non- return (Reflux) valve Flanged Ends in swing type PN: 1.6 Pressure with Gun Metal seat IS: 5312 of approved quality (screwed end) :: | |||
218 | 218 | 100 mm dia | 1 | Each | |
219 | 219 | Providing and fixing C.I. sluice valves Flanged Ends IS: 14846 Rising spindle PN. 1.6 Pressure (with cap) complete with bolts, nuts, rubber insertions etc. | |||
220 | 220 | 100 mm dia | 1 | Each | |
221 | 221 | Providing and fixing C.I. double orifice kinetic Air valve ISI marked IS: 14845 with floats S.S seat PN: 1.6 pressure flanged ends of approved quality with bolts, nuts, rubber insertions etc. complete. | |||
222 | 222 | 100 mm dia | 1 | Each | |
223 | 223 | Providing, laying, jointing, fixing and testing Galvanized iron/G.I pipe lines and specials tees bends, sockets, elbows and clamps etc., inside building and testing etc., complete including cutting threading. | |||
224 | 224 | 15 mm i/d of pipeline; | 620 | Mtr. | |
225 | 225 | 20 mm i/d of pipeline; | 1272 | Mtr. | |
226 | 226 | 25 mm i/d of pipeline; | 875 | Mtr. | |
227 | 227 | 32 mm i/d of pipeline; | 560 | Mtr. | |
228 | 228 | 40 mm i/d of pipeline; | 55 | Mtr. | |
229 | 229 | Providing, fixing and jointing Non- Return valves, on G.I. pipe lines laid Outside/ inside buildings complete in all respects. | |||
230 | 230 | 32mm i/d; | 22 | Each | |
231 | 231 | Providing and placing on terrace polyethylene water storage tank, ISI : marked, III layers with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. | 60000 | Ltr. | |
232 | 232 | Providing and fixing G.I. Tank nipple AVR/SVW Make complete in all respects. | |||
233 | 233 | 32mm nominal bore | 60 | Each | |
234 | 234 | Providing and fixing in position best Indian make ISI Marked Ball cock 25mm with brass rod, PVC ball complete in all respects. | 30 | Each | |
235 | 235 | Providing and fixing mirror of superior glass (of approved quality) complete with 6 mm thick MDF hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. | 68 | Sqm | |
236 | 236 | Providing and fixing in position M.S. or heavy flat iron Clamps made out of M.S. flat not less than 5 mm of the approved design for fixing PVC pipe to walls complete in all respects including cutting and making good the walls and floors etc. and painting; | |||
237 | 237 | For 160mm i/d pipes; | 55 | Each | |
238 | 238 | Providing and fixing in position pre-cast R.C.C. manhole cover and frame of required shape and approved quality. Rectangular shape 600x750 mm internal dimensions.\n | 8 | Each | |
239 | 239 | Providing and fixing 25 HP monoblock domestic water pump set 3-Phase 415 volt, Pump Model- KDS-2560 for Clear water application having 100mm suction & 75mm delivery in CI casing, Gland Packed arrangement having CS shaft, CI Impeller, 2900 RPM at head 60 mtr. flow 13 LPS suitable for 50 Hz AC supply, including the cost of foundation, nuts and bolts complete in all respects. \n | 2 | Each | |
240 | 240 | Providing and fixing 1.0 HP monoblock domestic water pump set single -Phase for reverse hot water system with CI casing, Gland Packed arrangement having CS shaft, CI Impeller, including the cost of foundation, nuts and bolts complete in all respects. \n | 1 | Each | |
241 | 241 | Providing and fixing 0.5 HP monoblock domestic water pump set single -Phase for Domestic water tank to hot water tank system with CI casing, Gland Packed arrangement having CS shaft, CI Impeller, including the cost of foundation, nuts and bolts complete in all respects. \n | 1 | Each | |
242 | 242 | Providing and fixing 3000 ltrs. Solar heating system Non-pressurized complete with 3000 ltrs insulated tank, MS angle stand, 30 no's collectors+ makeup tank + heat exchanger in built + electric element 3 nos + temperature guage + hose pipe + hose pipe clamps complete in all respects. \n | 1 | Each | |
243 | 243 | Providing and fixing hose pipe rubber sleev 20mm dia complete in all respects. \n | 185 | Mtrs | |
244 | 244 | Providing and fixing hose pipe 20mm dia with 28 guage aluminium sheet insulation with self taping screw complete in all respects. \n | 220 | Mtrs | |
245 | 245 | Providing , installing , constructing of sewerage treatment plant complete with Civil & machinery work in all respect.\nQuantity for STP Ltr. Per Day = 32000 LPD\nSay. 32 KLD required for site. | 1 | Each | |
246 | 246 | Providing , installing , constructing of tubewell upto 150 mtr. B.G.L drilling of borehole, electric logging of borehole with electroinic logger, PVC pipe 10kg pressure, clamp, bail plug & well cap, supply & shrounding of pea gravel complete development of tubewell in all respect. | 1 | Each | |
247 | 247 | FIRE FIGHTING | |||
248 | 248 | Supply, installation, testing and commissioning of fire authority approved fire fighting pumps, electrically driven generally as specified and shown in equipment schedule complete with: | |||
249 | 249 | Hydrant and Sprinkler Main Fire Pump | |||
250 | 250 | Supply, installation, testing and commissioning of fire authority approved split casing multistage stage, single outlet pumping set with bronze impeller, C.I. body and connected by a flexible coupling to a totally enclosed fan cooled induction motor mounted on a common structural base plate with RCC base and with all pump accessories, including pressure switch, pressure gauge (both with cut off ball valves) complete as per specifications. Motor to be suitable for 415 volts, 3 phase, 50 cycles A.C. supply (specifications as per fire fighting requirements and on the pattern of TAC or local authority approval) as per instruction and specifications. | |||
251 | 251 | Capacity : 2280 LPM | |||
252 | 252 | App.head : 70 m | |||
253 | 253 | App.H.P. : 60 HP | |||
254 | 254 | RPM : 2900 | 1 | Each | |
255 | 255 | Main Diesel Pump - Common for Hydrant and Sprinkler System | |||
256 | 256 | Supply, installation, testing and commissioning of fire authority approved split casing single stage, single outlet pumping set with C.I. body and bronze impeller connected by means of a flexible coupling heat exchanger cooled diesel engine mounted on a common structural base plate with RCC base, anti-vibration pads and foundation including pressure switch, pressure gauge (both with cut off ball valves) complete with electric panel for automatic starting, battery including spare battery, automatic starting arrangement, exhaust pipe of required length to discharge outside building with muffler, oil tank mounted on suitable structural supports complete in all respects as per specifications ready for use and as per latest requirement of fire authority / regularities. | |||
257 | 257 | Capacity : 2280 lpm | |||
258 | 258 | App.head : 70 m | |||
259 | 259 | App.H.P. : 60 BHP | |||
260 | 260 | RPM : 1500/1800 | 1 | Each | |
261 | 261 | Fire Jockey Pumps | |||
262 | 262 | Supplying, installation, testing & commissioning of vertical inline jockey pump, comprising of 1 No. electrical driven inline of capacity 3.0 LPS to a head to 90 meter with all accessories, pumps shall be with C.I. Base, S.S 304, impeller, shaft, mechanical seal, S.S. Shaft directly coupled to motor suitable for operation on 400/440 volts, 3 phase 2900 RPM. TEFC electronic motor mounted on a common channel baseplate 150mm dia pressure gauge, GM isolation cock and cement concrete foundation with plaster with dunlop cushy foot mountings complete in all repsects. | |||
263 | 263 | Capacity : 180 lpm | |||
264 | 264 | App.head : 70 m | |||
265 | 265 | App. H.P. : 10 HP | |||
266 | 266 | RPM : 2900 | 1 | Each | |
267 | 267 | Supply and installation of pressure gauge complete for Pump House | 4 | Set | |
268 | 268 | Supply, fabrication (as per code), installation, testing and commissioning of pressure vessels 250mm diameter and 1000mm high fabricated from 8-10mm M.S. plate with accessories inside painting with epoxy paint and outside with enamel. | 1 | Each | |
269 | 269 | Providing & fixing 150mm diameter M.S. Class 'C' diesel pump exhaust pipe includings all fittings, like bends, tees etc. clamps / structural steel supports. The pipe shall be provided with 75mm thick fiberglass insulation & covering the insulation with 500 g polythene sheet giving proper overlaps & sealing the joints with suitable adhesive compound. The pipe shall be provided with 24 gauge aluminium sheet cladding. | 5 | meter | |
270 | 270 | Providing, fixing, testing & commissioning of resilient rubber lined single arch vibration eliminators suitable for raw water up to 45 deg. C temperature, working pressure 8.8 Kg/cm2 and test pressure 14 Kg/cm2 for :- | |||
271 | 271 | 150 mm dia | 2 | Each | |
272 | 272 | 100 mm dia | 1 | Each | |
273 | 273 | FIRE FIGHTING SYSTEM | |||
274 | 274 | Supply, installation, testing, trial run and commissioning of hydrants all complete as required and as approved | |||
275 | 275 | Internal hydrants / landing valves generally as specified and all complete with: | |||
276 | 276 | 63mm dia Single outlet SS landing valve IS marked with suitable size bolts, nuts, washers and gaskets. | 7 | Each | |
277 | 277 | First aid hose reel with 25 mm dia, 30 m long rubber hose, ball valve, piping, nozzle and pressure guage with swinging drum with all connections to be added.(testing pressure shall be 10 kg / sqcm. max.) | 7 | Each | |
278 | 278 | 63mm reinforced rubber hoses (RRL) with male and female SS coupling including copper wire wound. IS marked- 15 m length. | 14 | Each | |
279 | 279 | Standard short size SS branch pipe with nozzle of 20mm nomnal bor outlet with instaneous type 63 mm dia coupling complete IS marked & TAC approved. | 7 | Each | |
280 | 280 | External hydrant valve, IS marked of SS with generally as specified and as required all complete. | |||
281 | 281 | 63mm dia SS single outlet landing valve IS marked with suitable size bolts, nuts, washers and gaskets. Landing valve shall be as per IS code. | 5 | Each | |
282 | 282 | 63mm reinforced rubber hoses (RRL) with male and female SS coupling, as per IS code. | 10 | Each | |
283 | 283 | standard short size gunmetal branch pipe with nozzle of 20mm nomnal bor outlet with instaneous type 63 mm dia coupling complete as per IS code. | 5 | Each | |
284 | 284 | M.S. fire hose cabinet (900x350x750mm) made out of 16 gauge M.S. sheet capable of accommodating landing valve, hose pipes, fittings & accessories. The box shall have a front glass door with lock and key arrangement & shall be painted with post office red colour (approval shall be taken on the basis of submitted sample before ordering) as per IS code. | 5 | Each | |
285 | 285 | Providing, installing, testing & commisioning of fire brigade inlet connection (fire department connection) consisting of 2 Nos. 63 mm dia instantaneous inlet arranged on a 50 mm dia header, 1 No. 150 mm diameter butterfly valve, 1 No. 150mm dia.dual type Non-return valve and wall mounted box of M.S. construction with glass door to house the above mentioned components. as per IS code. | 1 | Set | |
286 | 286 | Supply, fabrication & laying heavy grade IS marked black mild steel piping complete with all fittings, pipe supports, clamps etc. as approved with weleded jointing for external hydrant system. | |||
287 | 287 | 150 nominal bore | 250 | M | |
288 | 288 | Supply and fixing of wrapping and coating 4 mm thick pypkote with 10 % overlapping joints to the underground MS pipes including primer complete in all respects | |||
289 | 289 | 150 nominal bore | 300 | M | |
290 | 290 | Excavation upto hard murram as per general profiles and back filling | 330 | Meter | |
291 | 291 | Supply and installation of Butterfly Valves with mating flanges generally as specified all complete.(PN 16) | |||
292 | 292 | 150 nominal bore | 5 | Each | |
293 | 293 | 100 nominal bore | 2 | Each | |
294 | 294 | 80 nominal bore | 1 | Each | |
295 | 295 | Providing and laying Dual type non-return valve IS marked with flanges genertally as specified complete. (PN16) | |||
296 | 296 | 150 nominal bore | 2 | Each | |
297 | 297 | 80 nominal bore | 1 | Each | |
298 | 298 | Supply and installation of CI Sluice Valves with mating flanges generally as specified all complete.(PN 16) | |||
299 | 299 | 150 nominal bore | 3 | Each | |
300 | 300 | 100 nominal bore | 4 | Each | |
301 | 301 | Supply, installation, testing and commissioning C.I. flanged double air valves size 25mm with 25mm SS isolation valve etc. all complete. | 1 | Each | |
302 | 302 | Supply, installation testing & commissioning double flanged MS Y- strainers with M.S. body mesh strainer. | |||
303 | 303 | Size 200mm | 2 | Each | |
304 | 304 | Size 100mm | 1 | Each | |
305 | 305 | Supply, fabrication & laying heavy grade (Class C) IS marked black mild steel piping complete with all forged fittings, pipe supports, clamps, painting etc. as approved with threaded and welded jointing for Wet Riser System. | |||
306 | 306 | 200 mm nominal bore (Class C) | 12 | Rm | |
307 | 307 | 150 mm nominal bore (Class C) | 15 | Rm | |
308 | 308 | 100 mm nominal bore (Class C) | 80 | Rm | |
309 | 309 | 80 mm nominal bore (Class C) | 5 | Rm | |
310 | 310 | 25 mm nominal bore (Class C) | 10 | Rm | |
311 | 311 | ELECTRICAL WORKS FOR FIRE FIGHTING INSTALLATION WORKS | |||
312 | 312 | CUBICAL FIRE PANEL BOARD | 1 | No. | |
313 | 313 | i) For 1 x 60 HP Wet Riser Pump | |||
314 | 314 | iii) For 1 x 10 HP Jockey Pumps | |||
315 | 315 | Supply, installation, testing and commissioning of non draw out Cubical type sectinalised floor standing powder coated switch board of 31 MVA fault capacity at 415 V complete with 4 strip, 400 A capacity Aluminium Bus - Bar Electrolytic grade, cable alley & supplying & fixing of following switchgears as per specifications including connections & interconnections. | |||
316 | 316 | INCOMER | |||
317 | 317 | 400 A TPN MCCB with overload, short ckt., earth fault protection release, with 144 mm (0 -500 A) ammeter with 3 CT and selector switch, 144 mm (0 - 500 V) Voltmeter with selector switch, phase indication light with protection fuse, on / off / trip indicating light with protection fuse. - 01 Set | |||
318 | 318 | OUTGOINGS | |||
319 | 319 | i) For 2 x 60 HP Wet Riser and Sprinkler Pumps | |||
320 | 320 | 250 A TP MCCB with 110 A star delta starter, overload relay start / stop push buttons, 96 mm (0-250 A) ammeter with three CT & selector switch, on / off / trip indication light with protection fuses, single phase preventer. - 02 Set | |||
321 | 321 | ii) For 1 x 10 HP Jockey Pumps | |||
322 | 322 | 40 A TP MCB, 40 A star delta starter, overload relay, start/stop push buttons, ammeter (0-40A) with three CT & selector switch, on/off/trip indication lights with protection fuse, single phase preventer. - 02 Set | |||
323 | 323 | iii) 250 A TP MCCB with 110 A star delta starter, overload relay start / stop push buttons, 96 mm (0-250 A) ammeter with three CT & selector switch, on / off / trip indication light with protection fuses, single phase preventer (Spare). - 01 Set | |||
324 | 324 | iv) 32A MCB for battery charging alongwith engine start relay 24V DC with AMF Panel - 01 set | |||
325 | 325 | v) 63A change over switch (0-100A) ammeter with 63A MCB and 63A DOL starter - 01 set | |||
326 | 326 | vi) Provision for starting the diesel engine fire pump with battery charger for trickle & boost charging. The diesel engine driven fire pump shall start automatically in the event of pressure dorop beyong preset limit on mains faulure or failure of electrical driven pumps to start. | |||
327 | 327 | POWER & CONTROL CABLING | |||
328 | 328 | Supply, laying, testing and commissioning of power and control cabling, as per Standard specification including end termination as required. | |||
329 | 329 | Power cabling (XLPE) insulated and PVC sheathed, armoured, Aluminium Conductor of 1.1 KV grade on existing cable trays). | |||
330 | 330 | 3C x 35 Sq. mm | 8 | RMT | |
331 | 331 | 3C x 6 Sq. mm | 10 | RMT | |
332 | 332 | Control Cabling (PVC insulated and PVC sheathed, armoured, Copper Conductor of 1.1 KV grade on existing cable trays). | |||
333 | 333 | 5C x 1.5 Sq. mm | 10 | RMT | |
334 | 334 | Supply and installation of ladder type 16G ms cadmium plated 'U' shaped channel 40mm x 20mm cable tray of following sizes: | |||
335 | 335 | 150 mm wide | 10 | RMT | |
336 | 336 | SPRINKLER SYSTEM | |||
337 | 337 | Supply, installation, testing and commissioning of 100 mm dia zonal control valve inclusive of 1 nos 100 mm dia butterfly valve, flow switch, water pressure gauges & 25 mm dia. auxillary drain valve with sight glass with necessary MS piping with welded fittings of required sizes complete. | |||
338 | 338 | Butterfly Valve - 100mm dia. | 1 | Set | |
339 | 339 | Drain Valve - 25 mm | 1 | Set | |
340 | 340 | Flow Switch | 1 | Set | |
341 | 341 | Sight Glass | 1 | Set | |
342 | 342 | Providing and fixing 100 mm dia Pressure Gauges on Sprinkler Headers including Ball Valves | 1 | Each | |
343 | 343 | Providing, fixing, testing and commissioning of quick response 15 mm dia. gunmetal quartz bulb type sprinkler head to operate at 68 degree centigrade | |||
344 | 344 | Upright type , and above false ceiling level | 75 | Each | |
345 | 345 | Pendent type with C.P. single plate | 75 | Each | |
346 | 346 | Supply, fabrication & laying heavy grade IS marked black mild steel piping complete with all fittings, pipe supports, clamps, painting etc. as approved with threaded and welded jointing for Wet Riser and Sprinkler System. | |||
347 | 347 | Note: a. Threaded joint upto 50mm diameter pipe. | |||
348 | 348 | b. Welded joint above 50mm diameter pipe. | |||
349 | 349 | 100 mm nominal bore | 50 | Rm | |
350 | 350 | 65 mm nominal bore | 60 | Rm | |
351 | 351 | 50 mm nominal bore | 12 | Rm | |
352 | 352 | 40 mm nominal bore | 44 | Rm | |
353 | 353 | 25 mm nominal bore | 110 | Rm | |
354 | 354 | Providing and fixing 25 mm dia, 700mm to 1500mm long flexible stainless steel (SS 304) pipe for making final connection of sprinkler head with sprinkler system piping network including 2 nos. 25mm diameter G.I. connector, G.I. Nipple, Reducer, elbow and threaded jointing complete as per detail. | |||
355 | 355 | 1500mm long | 35 | Each | |
356 | 356 | ELECTRICAL WORKS -E.I. | |||
357 | 357 | Supply erection testing and commissioning of long life Maintenance Free Earthing System. The Rod shall be of Copper Bonded Steel with 17.2 mm dia. and 10 feet length with a core of mild steel molecularly bonded with min. 250 microns coating of 99.99% pure electrolytic grade Copper and exothermically welded Cu Busbar of 50X6X200mm tested by CPRI capable of bearing fault current of 25 kA. Along with earth enhancement compound tested by RoHs complying IEC 62561-7 in a sealed bag of minimum 30 kg (10 kg Bag x 3) resistivity is less than 0.2 ohm meter . The earth station shall be with Suitable Poly-plastic Pit Cover with lockable arrangement. including cost of petty material required to complete the job in all respect. MAKE :- JMV, OBO BATTERMAN OR ERECO. | 8 | Nos. | |
358 | 358 | Supply erection testing and commissioning of single spike air terminals of 10 mm/16 mm dia.of following lengths as required and as per site conditions. the air terminal shall be manufactured with aluminium. The terminal shall be provided with the integrated / attached threaded base support suitable for mounting the terminals as per site condition. The base support shall be minimum 3 mm thick and shall have inbuilt connector fitting for connection of lightning conductor in such away that conductor contact area shall not be less than 40mm on all side of the conductor. The air terminals shall be supplied with the intermediate guy-wire supports to make it stable in case of high wind speed. including cost of petty material required to complete the job in all respect. Make: JMV, OBO BATTERMAN OR ERECO. | |||
359 | 359 | 1000 mm | 20 | Nos. | |
360 | 360 | Supply erection testing and commissioning of Roof Conductor for Parapet and Interconnection of Air Terminal: Supply of 8 mm dia aluminium round conductor for air termination network at parapet wall with suitable accessories like type of clamps, conductor holder etc. as required and as per specifications. including cost of petty material required to complete the job in all respect. Make: JMV, OBO BATTERMAN OR ERECO. | 300 | RM | |
361 | 361 | Supply erection of T - Connector for making straight joint of 8 mm aluminium Conductor to 8 mm dia aluminium conductor on parapet wall, roof and vertical facade of mesonery / glass / metalic work. including cost of petty material required to complete the job in all respect. Make: JMV, OBO BATTERMAN OR ERECO. | 20 | Nos. | |
362 | 362 | Supply erection OF Cross - Connector for making straight joint of 8 mm aluminium Conductor to 8 mm dia aluminium conductor on parapet wall, roof and vertical facade of mesonery / glass / metalic work. including cost of petty material required to complete the job in all respect. Make:JMV, OBO BATTERMAN OR ERECO.\n | 20 | Nos. | |
363 | 363 | Supply erection of Straight - Connector for making straight joint of 8 mm aluminium Conductor to 8 mm dia aluminium conductor on parapet wall, roof and vertical facade of mesonery / glass / metalic work. including cost of petty material required to complete the job in all respect. Make: JMV, OBO BATTERMAN OR ERECO. | 50 | Nos. | |
364 | 364 | Down Conductor : | |||
365 | 365 | Supply erection of 8 mm dia aluminium round conductor for Down conductors to be installed on vertical façade of mesonery / glass / metalic work, with suitable accessories like type of clamps, conductor holder etc. as required and as per specifications. including cost of petty material required to complete the job in all respect. Make: JMV, OBO BATTERMAN OR ERECO. | 210 | M | |
366 | 366 | Supply erection of Test Clamp to disconnect the down conductor from the earth termination network for regular checks of the earth termination resistance value. including cost of petty material required to complete the job in all respect. Make: JMV, OBO BATTERMAN OR ERECO. | 8 | Nos. | |
367 | 367 | Supply erection of Expansion piece of made of 8mm aluminium at every 20 mtr to maintain the flexibility to the conductor due to heat. including cost of petty material required to complete the job in all respect. Make: JMV, OBO BATTERMAN OR ERECO. | 16 | Nos. | |
368 | 368 | Supply, Installation, Testing & Commissioning of ACB Microprocessor Based release 800A 4P EDO 50KA with OL,S/C,Earth Fault,Instanious,Neutral & Ground fault Protection LSING + Display Confirm IEC 60947/IS 13947 ( Part 1 & 2), Ics=Icu=Icw, Icw value is for 1 Sec. Flexible & Adjustable Current time protection for Over load, Short Circuit, instataneous s/C & Earth Fault with 5 Trip history & inbuilt LED for Fault indiaction for O/L, / S/C & E/F | 3 | each | |
369 | 369 | ACB Microprocessor Based release 1600A 4P EDO 50KA with OL ,S/C,Earth Fault,Instanious,Neutral & Ground fault Protection LSING + Display Confirm IEC 60947/IS 13947 ( Part 1 & 2), Ics=Icu=Icw, Icw value is for 1 Sec. Flexible & Adjustable Current time protection for Over load, Short Circuit, instataneous s/C & Earth Fault with 5 Trip history & inbuilt LED for Fault indiaction for O/L, / S/C & E/F | 5 | each | |
370 | 370 | FIRE & ELECTRICAL SHOCK SAFETY EQUIPMENTS | |||
371 | 371 | Portable Chemical Fire Extinguishers & safety equipments | |||
372 | 372 | Supplying & Fixing of following capacity Carbon Dioxide (CO2) Type Fire Extinguisher ISI Marked with following specifications fully charged having safety valve, discharge hose & horn complete in all respects as required. | |||
373 | 373 | 4.5Kgs with 1 Mtrs hose horn ( ISI Marked IS 15683 : 2006) | 4 | each | |
374 | 374 | Supplying & Fixing ABC Type Fire Extinguisher 4 Kgs. Capacity ISI Marked IS: -15683 : 2006 filled with MAP 90% ABC powder complete in all respect as required. | 4 | each | |
375 | 375 | Supply and fixing ABC type Modular fire extinguishers ceiling mounted 25 kg capacity | 2 | set | |
376 | 376 | Supplying and installing at approved location approved make fire buckets 6 Nos of 24 gauge galvanized steel sheet, standard 9 litre capacity and of round bottom shape, painted white inside and red outside and black on the bottom, inscribed with letters “FIRE” in black and gold. Cost shall be inclusive of providing MS stand duly painted over a coat of primer. | 2 | each | |
377 | 377 | Supplying and fixing 1000mm x 2000mm wide x15mm thick rubber matting (complying with ISS) and suitable to with stand 11KV as required. | 12 | each | |
378 | 378 | Supplying and fixing standard shock treatment chart in English & Hindi mounted on wooden frame with glass. | 2 | each | |
379 | 379 | Supplying & fixing rubber glooves (11 KV rating) ISI | 2 | set | |
380 | 380 | Motor | 3 | Each | |
381 | 381 | ELECTRICAL-SUBSTATION | |||
382 | 382 | Supply, installation, testing and commissioning of powder coated of Siemens grey of approved colour compartmentlised cubicle MV Panel fabricated out of 14/16 SWG thick CRCA sheet steel suitable for operation on 415 Volts, 50Hz, 3 Phase 4 wire AC supply . The panel shalll be indoor free standing, floor mounting, dust and vermin proof type, adeqate size cable alley with front operated rotary handles for MCCB's complete with gland plates, lifting hooks, ventillating louvers, busbars, Inter connections, earthing, labelling electrical interlocking as per specification and drawings, suitable for termination of cables as per single line diagram including. supply and fixing of following switchgear and accessories complete as required. A separate earth copper bus bar of size 25 mm x 3 mm to be provided throughout the length of the panel. complete with both Electrically interlocking foolproof system. The Panel should be extendable type. (Make of panel, Tricolite, Ambit, International Switchgear, Amco, Kalyani switchgear)l). Having CPRI test certificate breaking capacity 70 KA and ISO 9001-2008 | |||
383 | 383 | Note:- The cost of ACBs, MCCBs, MCBs are not included in the panel's cost and will be paid under separate head. All acccessories included in the panel cost such as rotary handles, Spreader link and its accessories & metering etc. The panel should be got inspected / tested in the factory premises from the Engineer-in-charge / consultant before brought at site after approval of all drawings of the panel. | |||
384 | 384 | Power & Control Wiring will be (ISI 1100V) flamc smoke FRLS PVC Single Core Copper Wire,Copper Lugs, PVC Sleeve, Ferruels Numbers, Hardware & Labour etc. | 3 | EACH | |
385 | 385 | Design, Manufactaring, Supply, & Commissioning of fully rated electrical grade following given ratings TPN indoor duty aluminum bus duct with PVC heat shriankable sleave insulation, rigidly supported to withstand electro meachnical streeses arising out of short circuit condition totally enclose in dust and vermin proof CRCA sheet steel enclosure with 2 nos. suitable size continuous aluminum earth bars, inspection / ventilation louver set (as specified) LT bus duct / trunking suitable for 3 phase 4 wire, 50 MVA supply system generally confirming to Indian Standard specification, as well as technical specification enclose herewith. Main Bus duct between Transformers, DG Sets and LT switch board with adopter chamber at transformers, DG Sets and switch gear side complete with both side ends and horizontal and vertical bends. Complete with all respect. | 30 | Meter | |
386 | 386 | Outdoor Package Substation- of 11/0.433 KV, 1000 Kva | |||
387 | 387 | Design, Engineering, Manufacturing, Testing at Outdoor type package substation with facility for internal lighting, earthing, (Make - ABB,BHEL,Schneider, Siemens, L&T)\npadlocks etc. with necessary FRTU/RTU for SCADA integration purposes\nConnection between RMU & transformer shall be using 3 nos. 1C X 95 sq.mm.\nAluminium unarmoured (E) XLPE cable and connections from Transformer to LT\nPanel shall be by Aluminium Busbar.\n\n Package substation will have the following equipmentsA HT SWITCHGEAR\nA.1\nThree Way, 11kV, 630Amps 25kA for 1 sec., SF6 insulated Non-Extensible\nCompact switchgear (Type CCT2) consisting of Two Nos. Fixed Isolator\nFunction & One No. Fixed Vacuum Circuit Breaker in SF6 insulated Stainless\nsteel enclosure with self-powered series trip microprocessor base numerical over\ncurrent & earth fault relay (IDMTL+Inst.) for protection.\n\nRMU-NON-Extensible FBX-C /CCT2 (2 Nos. Isolators - C, 1 No. Vacuum\nCircuit Breaker - T2) with AL Busbar)-BIL 28/75kV\nRMU-NON-Extensible FBX-C/CCT2\nC FUNCTION Consist of 2 Nos. of Load Break Switch.\n1. Operation of LBS2. Cable Switch Rating- 12KV, 630A, 25KA/1 sec.\n3. Cable Bushing Rating- 630A,\n4. Cable Cover:- As per our standard,\n5. Fixed type Capacitive voltage indication\n6. ON/OFF/EARTH Switch via MIMIC.\n7. Bottom Cable Termination- Suitable up to 1 No. X 3C X 300 sq. mm\nT2 FUNCTION Type:- 3 position Disconnector and Earthing switch\nequipped with separate drive unit. T2 equipped with over current time\nrelease for transformer protection.\n1. Vacuum circuit breaker 12 kV, 630 A, 25kA/1 sec.\n2. Operation of breaker –\n | |||
388 | 388 | 3. Self Powered Electronic numerical protection relay providing over-current &\nearth fault protection – Schneider make CSPR or C&S make CSDPR relay 4. Tape Wound protection current transformers (Details During Detailed\nEngineering)\n5. Capacitive voltage indication fixed type.\n6. ON, OFF, EARTH indication on the front mimic of the panel.\n7. Cable box for termination of cable suitable up to 3 Nos. X 1C X 95 Sq. mm\n8. Cable cover standard.\n9. Emergency trip push button.\n10. Shunt trip Coil - 24V DC\nSchneider 1\n RMU accessories:-\n Operating Handle. 1\n Standard Manometer for SF6 gas pressure indication. 1\n Right Angled Cable Boots suitable for 1 Run x 3 C x 300 Sq mm 3 \nOffer reference No/Rev No\nPSS – TECHNO-COMMERCIAL OFFER\nSchneider Electric Infrastructure Limited\n(the demerged Distribution Undertaking of Areva T&D India Limited)\nMilestone 87, Vadodara-Halol Highway, Village Kotambi, Post Office, Jarod, Vadodara – 391510, Gujarat\nTel : 0091 266 866 4466 www.schneider-infra.in\nBattery 24V DC, 12Ah & Battery Charger - 5A 1\n\nB\nTRANSFORMER (Manufactured as per IS 1180 with Efficiency Level - II), \nTYPE:- Ester Oil Type, Hermitically Sealed. (Make - ABB,BHEL,Schneider, Siemens, CROMPTON )\n1. Ratio- 11KV/433V,\n2. Capacity:- 1000 KVA,\n3. Vector Group- DYn11,\n | |||
389 | 389 | 5. Winding - Copper,\n6. Class of Insulation- A,\n7. Ambient Temperature- 50 Deg C, 8. Temperature rise in Oil & Winding over ambient- 40 & 45 Deg C\n9. Total Losses @ 50% Loading - 2790 W (MAX)\n10. Total Losses @ 100% Loading - 7700 W (MAX)\n11. %Impedance – 5 %\nSchneider make 1\n Transformer Accessories\n Oil Temperature Indicator 1\n\nC LT Busbar - Main Busbar are of Aluminium however Copper Flexible are\nprovided between Transformer & LT Incomer Connection along with main busbar 1\n1 Voltage Rating- 433V\n2 Current Rating - 2000A\n\nD LT PANEL\nD-1 Incoming\n1 1600 A, ACB, 4 Poles, Drawout Manual, 50 KA, Microprocessor based release\nfor O/L, S/C & E/F protection (Make - ABB,BHEL,Schneider, Siemens, L&T) \n2 On, OFF, TRIP lamps Schneider = 3\n3 R/Y/B indicating lamps Schneider =3\n4 CTs 1600/5A, AC. CL. 1, 5 VA\nPrecise/Reco/reputed\nmake =3\n5 Digital MFM - EM 6400, AC. CL. 1.0 Schneider= 1\nAPFC Panel- Incomer 1 no MCCB TP Pole 320A Ics= 50kA Thermal magnetic\nwith Double break roto mechanism. Intelligent APFC Relay with 150 kVAr MPP\nHeavy duty Capacitor with suitable rating of contactors & Short ckt protection\ndevice for each banking. Banking of Capacitor should be 12.5 X4 no, 25 X 2no,\n50 X 1no\n\n\n\n | |||
390 | 390 | \nOutdoor Type 2mm thick Galvanised Enclosure shall have IP54 degree of\nprotection for HT & LT switchgear compartment & IP34 degree of protection for\nTransformer Compartment. The enclosure exterior shall be powder coated with\nPP based paint. HT & LT compartment will be provided with the door and pad\nlocking arrangement. Transformer Compartment will be provided with Cover.The\nCompartment illumination lamp with door operated switch shall be provided for\nHT and LT compartment. Lifting(Bucket) Arrangement shall be provided with\neach PSS.\nSchneider 1\n\nG EARTHING - Internal earthing connection by using 50 X 6 Aluminium Strips 1\n\nH HV KIT 1\nI LV TROLLEY 1\nJ COPPER FLEXIBLE | 2 | EACH | |
391 | 391 | 11kV HT 4 Panel Board | |||
392 | 392 | Supply, installation, testing and commissioning of 11kV HT 4 Panel Board (VCB Type) for 11kv Sub Station OEM/OEM Authorized Manufactureres (Make - ABB,BHEL,Schneider, Siemens, L&T) | |||
393 | 393 | INCOMMER FEEDER: Supply of HT 12KV, 3Phase 50Hz, totally metal clad withdraw able type Vacuum Circuit Breaker panel with Copper bus bar of suitable rating, horizontal isolation type VCB of capacity minimum 630 Amps rated current,Aluminium bus bar as per IEC 62271-100-200.The offered panels shall be tested for IAC level of min. 25kA (ABB/BHEL/Siemens/ Schneider only) for better performance: (i) Mechanical life -30,000 , (ii) Rated Current – 10,000 & (iii) Rated Short Circuit Operations – 100\nMakes: OEM / OEM Authorised Manufactureres, ABB/ BHEL/Siemens/ Schneider. Panel and VCB parameters are as below :\n(i) Rated Voltage level/ PF withstand voltage/ Impulse level:12KV/ 28 kV/ 75 kVp\n(ii) Continuous current rating: minimum 630A\n(iii) Short circuit withstand current: minimum 25KA for 1sec.\n(iv) One no. minimum 630 Amps horizontal draw out type vacuum circuit breaker in 12KV metal clad floor mounting panel complete with following:-\n(a)Manually & Motor operated(230V,AC,50Hz) spring charged type, manually and electrically open (electrical – 24 VDC) operation type, incorporating mechanical as well as electrical ON/OFF indication "OFF" push button, test/service position limit switches, with minimum 6NO+6NC breaker auxiliary contacts in service position.\n(b)Epoxy cast wound current transformer (CT),12KV of rati150-75 /1+1A, 5P10/0.5, 15 VA burden with metering and protection core including necessary control wiring\n(c) Voltage transformer with three nos. 1 phase, 3 limbs connected in star, dual class, 11 KV/V3/110V/V3,Cl. 1.0/0.5, 50 VA with draw able type with automatic safety shutters 50VA burden with primary & secondary fuses.(Confirming related IS specifications). | |||
394 | 394 | A) Protection arrangements for the breaker shall comprise of the following:\ni) U/V, O/V, E/F, O/C, TCS with IEC 103 protocol for communication & drawout type - Numerical Type Siemens A1(7SJ62)/ ABB (REF 615)/ Schneider (P122)\n(ii) Complete with Master Trip/ Anti pumping relay.\nAll the Relays shall belong to a common platform and shall be of single make with Electromechanical Relays in Draw-out casing\n(B) The following meters, indications and accessories are to be provided with the panel:\n(i) Digital Voltmeter range 0-12KV with necessary voltmeter with built in selector switch & suitable for 110V AC 96X96 sq mm dial with shrouded terminal.\n(ii) Digital Ammeter range of applicable range with necessary ammeter with built in selector switch dual graduated scale 96X96 sq mm dial with shrouded terminal.\n(iii) Multi-Function meter (EM6400)\n(iv) Necessary DC supply, healthy indication lamp & switch.\n(v) Control: (a)TNC (Trip, Neutral & Close) breaker control switch with indicating arrangement, (b) Local/Remote selector switch for breaker open/close operations.\n | |||
395 | 395 | OUTGOING FEEDER - Supply of HT 12KV, 3Phase 50Hz, totally metal clad withdraw able type Vacuum Circuit Breaker panel with Copper bus bar of suitable rating, horizontal isolation type VCB of capacity minimum 630 Amps rated current, as per IEC 62271-100-200.The offered panels shall be tested for IAC level of 25kA, (ABB/BHEL/Siemens/ Schneider only) for better performance: (i) Mechanical life - 30,000 , (ii) Rated Current – 10,000 & (iii) Rated Short Circuit operations – 100\nMakes: OEM / OEM Authorised Manufactureres, ABB/ BHEL/Siemens/ Schneider. Panel and VCB parameters are as below:\n(i) Rated Voltage level/ PF withstand voltage/ Impulse level:12KV/ 28 kV/ 75 kVp\n(ii) Continuous current rating: minimum 630A\n(iii) Short circuit withstand current: minimum 25KA for 3sec.\n(iv) One no. minimum 630 Amps horizontal draw out type vacuum circuit breaker in 12KV metal clad floor mounting panel complete with following :-\n(a)Manually & Motor operated(230V,AC,50Hz) spring charged type, manually and electrically open (electrical – 24 VDC) operation type, incorporating mechanical as well as electrical ON/OFF indication "OFF" push button, test/service position limit switches, with minimum 6NO+6NC breaker auxiliary contacts in service position.\n(b)Epoxy cast wound current transformer (CT),12KV of ratio **/1+1A, 5P10/0.5, 15 VA burden with metering and protection core including necessary control wiring\nA) Protection arrangements for the breaker shall comprise of the following:\ni) E/F, O/C, TCS with IEC 103 protocol for communication & drawout type - Numerical Type Siemens (7SJ62)/ ABB (REF)/ Schneider ( P122) (ii) Mater Trip Relay (iii) Aux . Transformer protection relay\nAll the Relays shall belong to a common platform and shall be of single make with Electromechanical Relays in Draw-out casing\n | |||
396 | 396 | (B) The following meters, indications and accessories are to be provided with the panel:\n(i) Digital Ammeter range of applicable range with necessary ammeter with built in selector switch dual graduated scale 96X96 sq mm dial with shrouded terminal.\n(ii) Multi-Function meter (EM 6400NG)\n(iii) Necessary DC supply, healthy indication lamp & switch.\n(iv) Control: (a)TNC (Trip, Neutral & Close) breaker control switch with indicating arrangement, (b) Local/Remote selector switch for breaker open/close operations. | |||
397 | 397 | TOTAL 4 VCB Panel Switchboard | 1 | EACH | |
398 | 398 | ELECTRICAL-DG SET | |||
399 | 399 | Supply, installation, testing & commissioning of eco friendly 1 No. X 500kVA Silent D.G. Sets suitable for synchronization, Liquid Cooled, Turbo Charged After Cooled diesel engine make KOEL/Cummins/CAT producing a minimum of 608BHP at 1500 rpm, 0.8 power factor, able to deliver optimum output under NTP Conditions with a provision of 10% temporary overload once in 12 hours of running, directly coupled to 500kVA, 415 Volts AC, Three Phase, 50 Hz, 4 wire, 0.8 power factor lagging, brushless type, synchronous alternator, automatic voltage regulator. The engine and alternator should be fitted on common base frame with AVM Pads. The genset should be complete with all accessories like digital engine controller KG-745 or equivalent, remote monitoring system, Electronic Governor, fuel tank of 990 Liters integrated inside the canopy, standard silencer, 24 Volts electric starting system complete with battery and leads, weather proof acoustic enclosure as per CPCB norms and noise level not exceeding 75 db at a distance of 1 meter.\n | 1 | Each | |
400 | 400 | ELECTRICAL-COMPOUND LIGHTING | |||
401 | 401 | Supply erection testing and commissioning of LED POST TOP 35WATT (+_1 W ) LED EFFICACY 120 LUMENS / WATT including petty materials required to complete the job in all respect. WIPRO Make , Model :-LP07-431-XXX-57-CL or Equivalent in Philips / Trilux as approved by the Engineer-in-charge. Warranty 2 years from the Date of invoice. | 32 | Each | |
402 | 402 | Supply, installation, testing and commisioning of 60 W LED Flood Light luminaire with system lumen output 5100lm and system efficacy of > 85lm/W. LED Flood Light shall be made up of Die Cast aluminum housing with black epoxy polyester powder coating for long life. The luminaire shall be complete IP66 protection for Optical Compartment and Control Gear Compartment. The LED Flood Light shall have power factor more than 0.95 with THD less than 10%. LED Driver Output voltage shall be less than SELV Limits for safe operation and maintenance. including all petty materials required to complete the job in all respect. Reference Wipro Catalogue No.LF19-711-060-57-XX or equivalent make in Philips or Trilux. LM79 REPORT FROM 'NABL' LAB SHOULD BE SUBMITTED | 12 | Each | |
403 | 403 | Supplying, installation, testing and commissioning of 25 W LED solar street luminaire of housing made of extruded aluminium and IP65 ingress protection. The all in one integrated solar street lighting system having system lumen output upto 4800 lumens. The luminaire should be having SMD type LEDs with secondary lens / optics suitable for streetlighting application, MPPT charge controller and DC driver and automatic dusk to dawn operation feature. The integrated luminaire should have 50Wp monocrystalline PV module, 12.8V/22Ah LifePo4 battery pack having >/= 12 Hrs of autonomy with full power mode and >/= 48 hrs of autonomy with saving mode, dimension (740X305X140) ± 2% mm with aesthetic and compact design. Integreated PIR sensor is used for detecting the movement and increase the intensity of LEDs. to creat safe & effective lighting environment. including all petty materials required to complete the job in all respect. Wipro Cat. No LR14-361-XXX-65-XX or equivalent make in Philips or Trilux. LM79 REPORT FROM 'NABL' LAB SHOULD BE SUBMITTED | 4 | Each | |
404 | 404 | Supply, installation, testing and commisioning of 35 W LED Street Light luminaire with system efficacy of 120lm/W. Light shall be made up of Die Cast aluminum housing . The luminaire shall be complete IP66 protection for Optical Compartment and Control Gear Compartment. Street Light shall have power factor more than 0.95 with THD less than 10%. LED Driver Output voltage shall be less than SELV Limits for safe operation and maintenance. including all petty materials required to complete the job in all respect. Wipro Cat. No LR13-501-XXX-57-XX or equivalent make in Philips or Trilux. LM79 REPORT FROM 'NABL' LAB SHOULD BE SUBMITTED | 37 | Each | |
405 | 405 | ELECTRICAL-FAN & FITTING | |||
406 | 406 | Supply, installation, testing and commisioning of Led fixture 600mmX600mm 33W+/- 1W Recess mounted with full diffuser with minimum system lumen efficacy of 100lm/W having UGR >19 with APFC constant Current driver for proper driving of LEDs and P.F.>0.95 with THD<10% . including all petty materials required to complete the job in all respect.Wipro Cat. No CRCO10R033HP57UGR or equivalent make in Philips or Trilux. LM79 REPORT FROM 'NABL' LAB SHOULD BE SUBMITTED | 362 | NOS | |
407 | 407 | Supply, installation, testing and commisioning of Led Recess mounted downlighter 9W+/- 1W Square LED downlighter fixture with minimum system efficacy 100 lm/W with die cast aluminium housing for better heat dissapation having HET non-yellowing PMMA diffuser.The LED luminaire shall have power factor more than 0.9 with THD less than 10%. LED Driver Output voltage shall be less than SELV Limits for safe operation and maintenance . including all petty materials required to complete the job in all respect. Wipro Cat. No CRDL11R013HP57 or equivalent make in Philips or Trilux. LM79 REPORT FROM 'NABL' LAB SHOULD BE SUBMITTED | 1035 | NOS | |
408 | 408 | Supply, installation, testing and commisioning of Led Recess mounted downlighter 18W+/- 1W Square LED downlighter fixture with minimum system efficacy 85lm/W with die cast aluminium housing for better heat dissapation having HET non-yellowing PMMA diffuser.The LED luminaire shall have power factor more than 0.9 with THD less than 10%. LED Driver Output voltage shall be less than SELV Limits for safe operation and maintenance. including all petty materials required to complete the job in all respect. Wipro Cat. No CRDL11R023HP57 or equivalent make in Philips or Trilux. LM79 REPORT FROM 'NABL' LAB SHOULD BE SUBMITTED | 204 | NOS | |
409 | 409 | Supply, Installation,comissioning of Recess mounted 26 W+/- 1W round LED downlighter fixture with minimum system efficacy 100 lm/W with die cast aluminium housing for better heat dissapation having HET non-yellowing PMMA diffuser.The LED luminaire shall have power factor more than 0.95 with THD less than 10%. LED Driver Output voltage shall be less than SELV Limits for safe operation and maintenance. including all petty materials required to complete the job in all respect. Wipro Cat. No CRDL11R033HP57 or equivalent make in Philips or Trilux .LM79 REPORT FROM 'NABL' LAB SHOULD BE SUBMITTED | 105 | NOS | |
410 | 410 | Supply, installation, testing and comissioning of Recess Mounted Linear Led Luminaire 20W+/- 1W fixture with minimum system efficacy 100 lm/W with die cast aluminium housing for better heat dissapation having HET non-yellowing PMMA diffuser.The LED luminaire shall have power factor more than 0.9 with THD less than 20%. LED Driver Output voltage shall be less than SELV Limits for safe operation and maintenance. including all petty materials required to complete the job in all respect. Wipro Cat. No LM34-251-XXX-57RMCG1 or equivalent make in Philips or Trilux. LM79 REPORT FROM 'NABL' LAB SHOULD BE SUBMITTED | 10 | NOS | |
411 | 411 | Supply,installation,testing and comissioning of Recess Mounted Linear Led Luminaire 4X1 feet 31W+/- 1W fixture with minimum system efficacy 96 lm/W with die cast aluminium housing for better heat dissapation having HET non-yellowing PMMA diffuser.The LED luminaire shall have power factor more than 0.95 with THD less than 10%. LED Driver Output voltage shall be less than SELV Limits for safe operation and maintenance. including all petty materials required to complete the job in all respect. Wipro Cat. No CRCO13R038HP57G1 or equivalent make in Philips or Trilux. LM79 REPORT FROM 'NABL' LAB SHOULD BE SUBMITTED | 82 | NOS | |
412 | 412 | Supply, testing and commissioning of led fixture 4Ft 20W LED Batten LED Batten with minimum system lumen efficacy of 100lm/W with and P.F.>0.95 with THD<20% having Poly carbonate Diffuser and Aluminium Extrusion housing. including all petty materials required to complete the job in all respect. Cat No :Wipro Cat No. LL20-221-XXX-65AL1 or equivalent make in Philips or Trilux. LM79 REPORT FROM 'NABL' LAB SHOULD BE SUBMITTED | 930 | NOS | |
413 | 413 | Supply,installation,testing and comissioning of 2Ft 10W Mirror Light LED Batten Model no Batten with minimum system lumen efficacy of 100lm/W with and P.F.>0.95 with THD<20% having Poly carbonate Diffuser and polycarbonate Housing. including all petty materials required to complete the job in all respect. Cat. No :Wipro Cat No. LL20-111-XXX-60-NE3 or equivalent make in Philips or Trilux. LM79 REPORT FROM 'NABL' LAB SHOULD BE SUBMITTED | 116 | NOS | |
414 | 414 | Supply, testing and commissioning of led Strip light for indoor application IP 20 fixture with 5 M/Watt. Wipro Catalogue No.LS06-005-120-WW-50+ LED Driver 25 W (LG40-024) or equivalent make in Philips or Trilux. *LG40-024 driver suitable for one unit suitable for 5 m Spool of LED Strip. *LED Driver LG40-024. including all petty materials required to complete the job in all respect. LM79 REPORT FROM 'NABL' LAB SHOULD BE SUBMITTED | 70 | NOS | |
415 | 415 | Supply, installation, testing and commisioning of Hanging Decorative light water drop shaped suspended luminaire led lamp extra 20 W. including all petty materials required to complete the job in all respect. Wipro Cat. No LM87-D320-BLGD or equivalent make in Philips or Trilux. LM79 REPORT FROM 'NABL' LAB SHOULD BE SUBMITTED | 10 | NOS | |
416 | 416 | Supply, installation, testing and commisioning of 3 NO. Led Track Light 20W+/- 1W fixture with minimum system efficacy 2000 lm/W with die cast aluminium housing for better heat dissapation.The LED luminaire shall have power factor more than 0.9 with THD less than 20%. LED Driver Output voltage shall be less than SELV Limits for safe operation and maintenance.Wipro Cat. No LD57-251-036-40-XX. or equivalent make of Philips or Trilux. including cost of * XTS-5100 Single phase 1 mtr track . * SKB520 2 mtr single suspension . * XTS 52 Straight connector . including all petty materials required to complete the job in all respect. LM79 REPORT FROM 'NABL' LAB SHOULD BE SUBMITTED | 1 | NOS | |
417 | 417 | Supplying, installation, testing and commissioning of A.C. CEILING FAN 48" (1200MM) STAR 220 5 Star Rating including cost of petty material required to complete the job in all respect. ( Make : HAVELLS, CROMPTON, anchar panasonic). | 112 | NOS | |
418 | 418 | Supplying, installation, testing and commissioning of A.C. CEILING FAN 56" (1400MM) BRIZAIR DOUBLE BALL BEARING including cost of petty material required to complete the job in all respect. ( Make : HAVELLS, CROMPTON, anchar panasonic). | 80 | NOS | |
419 | 419 | Supply, Installation, Testing and Commissioning, of wall fan 300 mm (ISI mark) including cost of petty material required to complete the job in all respect. (Make Crompton, Havells or anchar panasonic) | 7 | NOS | |
420 | 420 | Supplying, installation, testing and commissioning of HEAVY DUTY EXHAUST FAN 900 RPM 1PHASE 300MM-12'' including cost of petty material required to complete the job in all respect. ( Make : HAVELLS, CROMPTON, anchar panasonic). | 198 | NOS | |
421 | 421 | Supplying, installation, testing and commissioning of HEAVY DUTY EXHAUST FAN 900 RPM 1PHASE 380MM-15'' including cost of petty material required to complete the job in all respect. ( Make : HAVELLS, CROMPTON, anchar panasonic). | 8 | NOS | |
422 | 422 | ELECTRICAL-SOLAR | |||
423 | 423 | Design, supply, installation, testing and commissioning of 200KW of 3 Phase solar grid tie power plant complete withallequipment, as required upto PCU including synchronizationwith grid supply and civil foundation work formodulemountingstructure. The system includes the appropriateno.ofPVModules, mounting structure for themodules. Array Junction boxes, all cabling according to thesite andsystem requirement as follows or as perapproveddrawings.Specifications of the tenderanddirectionsofSite Incharge. The rate includes thefollowing items as per site requirementand as pe+rmanufacturer's specification complete in all respects. The design should be gotapprovedfrom the Architect & Engineer-in-Charge before execution with five years warranty against manufacturing defects.Solar PV Modules (poly-crystalline)InverterMounting structure (fixed type)Electrical accessoriesEarthing kitAC cables for power evacuation,AC distribution board,Rate As Per Qutation Including GST | 1 | Each | |
424 | 424 | HVAC WORKS | |||
425 | 425 | Variable Refrigerant Volume / Flow Air-conditioning System (Heating & Cooling both) | |||
426 | 426 | Supply, installation, testing and commissioning of Variable Refrigerant Flow modular type air-conditioning system suitable for Cooling & Heating both by multiple scroll compressor/ DC Twin Rottary controlled by individual inverter complete with indoor and outdoor units with individual wired and wireless/wired remote controller for indoor units and centralized controller, interconnecting refrigerant piping, full charge of refrigerant gas (R-410A) & oil, control cabling and fittings etc. as per details given in specifications and having following items. The out door units shall be suitable for 3 phase 4 wire system, 415V + 10 %, 50 Hz AC supply and indoor shall be suitable for Single phase 220-240V, 50 Hz AC supply. | |||
427 | 427 | Outdoor Units | |||
428 | 428 | Supply, installation, testing & commissioning of Modular type outdoor units equipped with highly efficient scroll / DC rotary compressor fully inverter controlled (individual inverter for each compressor) i.e. changes its speed in accordance to the variation in cooling loads, special heat exchanger, low noise condenser fan, auto check function for connection error, auto address setting and capacity as mentioned below including all hardware & accessories & including full charging of R-410A refrigerant gas complete i/c powder coating complete as per specifications. The units should be with necessary weather protection coating. The coating should be done before bringing the units to site. Out door units shall be provided with MS stand of suitable size duly painted with corrosion resistant paint suitable for outdoor application. Each ODU/CAN in the module or individual unit should have multiple compressors for better redundancy. | |||
429 | 429 | Makes:-Daikin/Mitsubishi Electric/Voltas/ O General/Toshiba | |||
430 | 430 | 16 HP Cool /Heat Pump Unit | 10 | Nos | |
431 | 431 | INDOOR UNITS:- | |||
432 | 432 | AIR HANDLING UNITS | |||
433 | 433 | Supplying, Installation, Testing and commissioning of factory built DX Type Double skinned panels of AHU (Vertical/Horizontal flow) shall be 46 mm thick panels. Outer sheet of double skinned panels shall be made of pre-plasticized galvanized sheet, and inner sheet of plain G.I. Sheet, both inner & out sheet shall be of 24 gauge, with pressure injected foam insulation (PUF) of density 40 kg/m3 factory injected between them by injection moulding machine. AHU fan motor driven by variable frequency drive shall have backward inclined fan, irrespective of static pressure. Casing of fan shall be made of galvanized steel sheet. Fan wheels be tested and balanced dynamically. Fan & motor assembly shall be statically and dynamically balanced as per relevant ISO/AMCA standard. Filters shall be provided with washable synthetic type air filters having anodized aluminium frame. Belt(oil-resistant type) with drive package. Motors shall be energy (TEFC) efficient (IE-2) suitable for 415±10% volts, 50 cycles, three phase, supply motor shall be totally enclosed fan-cooled class F, with IP-55 protection, suitably designed for variable frequency drive applications, motor speed shall not exceed 1440 rpm.Drain connections, stainless steel (18G) drain pan with PUF insulation, necessary vibration isolation arrangement, etc. The blowers fan should be AMCA certified for air performance and sound rating and should be selected for maximum efficiency & machine shall be EN certified. Noise level shall not exceed 75dB at 2 Meter. All AHUs shall be provided with mixing box with space provision for fresh air and return air dampers. The Unit shall be complete with expansion valve, control panel and wired remote control which shall be supplied by the OEM of VRV/VRF system. Complete AHU shall be suitable for BMS control, complete as required. | |||
434 | 434 | Frame work for AHU & fan base material shall be of Extruded aluminium profile | |||
435 | 435 | Copper cooling(min. 6 row Deep) coil section with aluminium finned on copper tube(6 row deep),copper tube shall have 9.5 mm dia, minimum of 30 G thick & .43 mm inner groove tube and 0.15 mm thick aluminium fins firmly bonded to copper tubes assembled in zinc coated steel frame. Coil shall be design with intertwined type if the multiple outdoor connected to single coil Coil shall be selected for maximum air velocity of 500 ft/minute & face velocity across pre-filters at 500 ft/minute. The AHU shall be capable of delivering external static pressure of 60 MM . The total static pressure required shall be calculated by the contractor at the time of technical submittal & before procurement & ordering of equipments. Make:- Edgetech/ Systmair/Zeco | |||
436 | 436 | The AHU shall be with one set of commissioning filter which shall be replaced with actual filter. Price shall also be inclusive of all components described above to make unit complete and operational as required. | |||
437 | 437 | 8000 CFM, 40 MM SP, Floor Mounted, 6 RD | 4 | Nos | |
438 | 438 | 4500 CFM, 40 MM SP, Floor Mounted, 6 RD | 2 | Nos | |
439 | 439 | Supply, installation, testing & commissioning of Electronic Type Expansion Kit for above AHU with Communication PCB with Sensors, Corded Self Diagnostic Type Digital Thermostat, Y-joints etc. which shall be supplied by the OEM of VRV/VRF system. Makes:-Daikin/Mitsubishi Electric/O General/Toshiba | 6 | Set | |
440 | 440 | VRF INDOOR UNITS:- | |||
441 | 441 | Supply, Installation testing and commissioning of Indoor Units shall be either ceiling mounted cassette type, High wall unit as specified. The indoor unit shall have independent electronic control valve to control the refrigerant flow rate respond to variations of the air-conditioning load of the room. The fan shall be aerodynamically designed turbo multiblade type. Statically and dynamically balanced to ensure lowest noise. The cooling coil shall be made of seamless copper tube. The tube shall be hydraulically or mechanically expanded and tested for 21 Kg/cm2.The Drain pump/Panel as a standard accessory and shall be included in the price of cassette unit\n\n | |||
442 | 442 | VRF/VRV Tee/Y-Joints for Indoor & Outdoor units:- | |||
443 | 443 | Supply, Installation, Testing and commissioning of Imported fittings (Ref Net) Y-joints etc as per specifications.\n | 14 | Nos | |
444 | 444 | REFRIGERANT TOP-UP | |||
445 | 445 | Supply & Filling Refrigerant in systyem | 1 | Lot | |
446 | 446 | Piping and Valves | |||
447 | 447 | Refrigerant Piping | |||
448 | 448 | Supply and Installation of Interconnecting Refrigerant Piping of various sizes as required for the full functionality of the VRF/VRV system etc. complete in all respects duly insulated with closed cell nitrile rubber as per specifications of the manufacturer. the contractor shall submit a detailed drawing approved by the manufacturer showing the piping sizes & layout to be followed at the site with the tender document. the contractor shall also get the drawings showing outdoor units in connection with indoor units approved from the consultant in original from and then the head office of the manufacturer with a certificate stating that the piping layout is as per company specifications for full functioning of the VRF system. | |||
449 | 449 | 41.3 mm OD(insulation = 19 mm) | 10 | Rmt | |
450 | 450 | 34.9 mm OD(insulation = 19 mm) | 95 | Rmt | |
451 | 451 | 28.6 mm OD (insulation = 19 mm) | 90 | Rmt | |
452 | 452 | 22.2 mm OD (insulation = 13mm) | 55 | Rmt | |
453 | 453 | 19.1 mm OD (insulation = 13 mm) | 80 | Rmt | |
454 | 454 | 15.9 mm OD (insulation = 13 mm) | 455 | Rmt | |
455 | 455 | 12.7 mm OD (insulation = 13 mm) | 90 | Rmt | |
456 | 456 | 9.5 mm OD (insulation = 13mm) | 135 | Rmt | |
457 | 457 | 6.4 mm OD (insulation = 13 mm) | 35 | Rmt | |
458 | 458 | Cable Tray for Running Copper Refrigerant Piping upto 300 mm wide. | 600 | Rmt | |
459 | 459 | Control & Transmission Wiring | |||
460 | 460 | Providing & fixing control cum transmission wiring of 2 core x 1.5 sq. mm. copper in PVC conduits between indoor and outdoor unit. | 800 | Rmt | |
461 | 461 | Wiring for wired remotes. | |||
462 | 462 | Providing & fixing control wiring of 2 core x 1.5 sq mm copper between indoor units and their wired remote. | 150 | Rmt | |
463 | 463 | Condensate Drain Piping: | |||
464 | 464 | Providing and fixing PVC 10kg/Cm2 pipes of various sizes with 9 mm Nitrile insulation for condensed water drainage from Indoor unit to nearest disposal point in toilet/ outside rain water harvesting system as approved by architect/consultant | |||
465 | 465 | 40 MM Dia | 100 | Rmt | |
466 | 466 | 32 MM Dia | 100 | Rmt | |
467 | 467 | 25 MM Dia | 120 | Rmt | |
468 | 468 | Duct Works | |||
469 | 469 | Supply, Installation, Testing and Commissioning of factory fabricated galvanised steel sheet (GSS) ducting as per the relevant IS of following thickness including necessary supports, adjustable dampers, vanes, etc. | |||
470 | 470 | 24 gauge galvanised sheet steel (0.63 mm) | 600 | Sqm. | |
471 | 471 | 22 gauge galvanised sheet steel (0.80 mm) | 500 | Sqm. | |
472 | 472 | 20 gauge galvanised sheet steel (1.0 mm) | 200 | Sqm. | |
473 | 473 | MAKES - ZECO/ ROLASTAR | |||
474 | 474 | DUCT INSULATION :- | |||
475 | 475 | Supply, installation, testing and commissioning of closed cell Nitrile rubber insulation class 'O' of following thickness applied with Proper adhesive and sealed with 50 mm wide Tape | |||
476 | 476 | MAKES - (INSULATION) :- A-FLEX/ K-FLEX | |||
477 | 477 | 9 mm thick on ducts in conditioned space | 1000 | Sqm. | |
478 | 478 | ACCOUSTIC LINING:- | |||
479 | 479 | MAKES - (INSULATION) :- A-FLEX/ K-FLEX | |||
480 | 480 | Supply & Installation of accoustic lining within supply air ducts with open cell Nitrile Rubber | |||
481 | 481 | 10 mm thick | 300 | Sqm. | |
482 | 482 | GRILLES & DIFFUSERS:- | |||
483 | 483 | Supply, installation, testing and balancing of GI Duct Damper | 2 | Sqm. | |
484 | 484 | Supply, Installation, Testing and Balancing of Powder coated extruded aluminum construction Linear Grilles with removable core. | 35 | Sqm. | |
485 | 485 | Supplying & fixing of opposed blade aluminum construction volume control dampers in supply air duct collars as per approved drawings and specifications. | 20 | Sqm. | |
486 | 486 | Supply, Installation, Testing and Balancing of Powder coated extruded aluminum construction Diffusers with removable core. Quoted price shall be without volume control damper. | 30 | Sqm. | |
487 | 487 | Supply, Installation, Testing and Balancing of Bird screen with Gravity Louvers | 2 | Sqm. | |
488 | 488 | Supply, Installation, Testing and Balancing of Motorized Fire Damper | 4 | Sqm. | |
489 | 489 | Supply, Installation, Testing and Balancing of Actuator for Motorized Fire Damper | 8 | Nos | |
490 | 490 | Supply, Fabrication, installation and testing the flexible connections constructed of fire resistance flexible double canvass sleevs as per approved shop drawings | 12 | Nos | |
491 | 491 | VENTILATION UNIT:- | |||
492 | 492 | Supplying, installing, testing and commissioning of INLINE FANS suitable for installing in any position in vertical or horizontal ducts. The casing shall be double skin, internally acoustically lined and constructed of galvanised steel. The fan shall be DIDW with forward curve impeller fitted with maintenance free external rotor motor. The motor shall be suitable for 220±10%/415±10%(as required).Cost to include necessary switching / Starter panel along with, including cabling ,wiring & earthing as required volt single phase 50 cycles AC supply. All units shall be complete with duct flexible connector and volume control damper. Make:-Humidin/Greenheck/Crystal Air System/ Airflow | |||
493 | 493 | The fan shall have low sound level exceeding not more than 40 DBA at three metre distance. | |||
494 | 494 | 1100 CFM, 20 mm SP | 4 | Nos | |
495 | 495 | FIRE ALARM SYSTEM | |||
496 | 496 | supply, Installation, connecting testing and commissioing of networkable Multi loop Microprocessor based intelligent and modular panel, 100% electronically addressable system where field device addressing is done by panel and not by user, Fully touch screen LED panel display, with peer to peer networking of 126 FAP in single node, each panel should act as master panel, single loop with minimum 200 addressable points ( detectors + Devices) per loop, panel with built in battery & battery charger that can support backup upto 24hours idle condition and 30 minutes during alarm condition, panel with integral thermal printer, option to interface to BMS with optional interface of LON Works, BACnet & MODBus, 96 Zonal LEDs on board, capacity to have upto 250 logic zones, 4 NAC circuits, 3 programmable relays, dedicated Alarm relay, Integral short circuit, Event history of 9,999 logs, option to load Logo on the main screen, view live analog level of field devices on the panel screen, option to download these events log and analog level report from panel, 3 detector sensitivity levels, option to change the volume and tone of loop powered UL listed base sounders from panel, Alarm verification option, T1/T2 timer option, field outputs modules programmable with 3 stage program options, have open path programming software, capacity to communicate loop mount repeater panels, optional NAC power supply units that are loop mountable and 100% supervised from main panel. The Neworkable FACP shall be able to accommodate below given detectors & devices as per boq and shall have 20% spare capacity to accommodate future expansions of addressable points. UL approved. Makes: Eaton / Menvier / Siemens | 1 | Each | |
497 | 497 | Supply Installation, Testing and Commissioning of Networkable Repeater panel with touch screen LED technology, upto 126 repeaters panel can be connected to the network, panel should have on screen LED's like Power on, Alarm, General Trouble, General Supervisory, Power Trouble, System Trouble, Test, NAC Trouble, multi language, panel with built in battery & battery charger that can support backup upto 24hours idle condition and 30 minutes during alarm condition, Ingress protection of IP40. UL approved. Makes: Eaton / Menvier / Siemens | 3 | Each | |
498 | 498 | Supply, Installation, Testing and Commissioning of Addressable 2 wire optical Multisensor (smoke cum heat) detector with built-in short circuit isolator, 100% soft addressing, single LED that covers 360Deg lightpipe technology with intensity that can handle upto 5000 Lux, Discreet design for incorporation into any décor, Common mounting base, Drift compensation, detector sensitivity of 2.55+/- 0.33%/ft, Chamber monitoring by panel, option to connect remote indicator. UL approved. Makes: Eaton / Menvier / Siemens | 616 | Nos. | |
499 | 499 | Supply, Installation, Testing and Commissioning of Addressable 2 wire Multimode Thermal heat detector with built-in short circuit isolator, 3 operating temperature of detector selectable from panel, 100% soft addressing, single LED that covers 360Deg lightpipe technology, Operating temperature / Heating Element rating of 32ºF to 100ºF / 32ºF to 150ºF (194ºF setting), Alarm current of 5mA (max), Standby current 220 µA (average), option to connect remote indicator. UL approved. Makes: Eaton / Menvier / Siemens | 53 | Nos. | |
500 | 500 | Supply, Installation, Testing and Commissioning of Addressable 2 wire Dual Action Pull Station with built in short circuit isolator, 100% soft addressed from panel, Wall mounting, resettable key option, Corrosion resistant gold plated SPST contacts, option of Single action or Dual action, optional Whether proof back box. UL approved. Makes: Eaton / Menvier / Siemens | 24 | Nos. | |
501 | 501 | Supply, Installation, Testing and Commissioning of Intelligent addressable loop powered sounder cum beacon with base, inbuilt Isolator, able to provide an o/p of 99dBA at 1m, peak light o/p of at least 3.2cd and shall have 11 programmable tones, 3 volume settings selectable from the panel and fully synchronized with other sounders and shall have the ability to switch between one tone for alert and one tone for evacuation. Shall have protection category of IP42. UL approved. Makes: Eaton / Menvier / Siemens | 26 | Nos. | |
502 | 502 | Supply, Installation, Testing and Commissioning of Addressable output module with inbuilt isolator and shall have the LED indication for Normal, Fault, test, and activation.The module shall have the option for configuration as fail safe operation. UL approved. Makes: Eaton / Menvier / Siemens | 1 | Nos. | |
503 | 503 | Supply, Installation, Testing and Commissioning of Addressable input module with inbuilt isolator and shall have the LED indication for Normal, Fault, test, and activation. The module shall have the option for configuration as fail safe operation. UL approved. Makes: Eaton / Menvier / Siemens | 1 | Nos. | |
504 | 504 | Supply installation, Testing & Commissoing of Remote Indicator ( RI) High visibility LED, Wide viewing angle for increased visibility, Discreet design for incorporation in to any décor. RI should be of same make as detectors & devices. UL approved. Makes: Eaton / Menvier / Siemens | 308 | Nos. | |
505 | 505 | Supply installation, Testing & Commissoing of 2 twisted pair x 1.5 mm, Multistranded Copper FRLS Armoured cable, RED in Colour, laid on surface with GI saddle-spacers every 0.3 meters UL approved.Make-Laap/Batra/Vimco/Polycab/Havels / Ramcro. | 6500 | meter |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail