}

Plwss Durah Khad To Dhawansh , Panvi , Dabbar And Kuadhar In Gp . Lot Nirmand Block Tehsil Anni Distt . Kullu Hp Sh . Const . Of Rcc Intake Chamber 1 No . , Const Of Sed . Tank 10800 Ltrs Capacity , Const . Of Rcc Storage Tank 40000 Ltr , , Durah-Himachal Pradesh

Irrigation And Public Health Department has published Plwss Durah Khad To Dhawansh , Panvi , Dabbar And Kuadhar In Gp . Lot Nirmand Block Tehsil Anni Distt . Kullu Hp Sh . Const . Of Rcc Intake Chamber 1 No . , Const Of Sed . Tank 10800 Ltrs Capacity , Const . Of Rcc Storage Tank 40000 Ltr , . Submission Date for this Tender is 05-11-2020. Manhole Construction Tenders in Durah Himachal Pradesh. Bidders can get complete Tender details and download the document.




Tender Notice

25860615
Plwss Durah Khad To Dhawansh , Panvi , Dabbar And Kuadhar In Gp . Lot Nirmand Block Tehsil Anni Distt . Kullu Hp Sh . Const . Of Rcc Intake Chamber 1 No . , Const Of Sed . Tank 10800 Ltrs Capacity , Const . Of Rcc Storage Tank 40000 Ltr ,
Open Tender
Indian
Himachal Pradesh
Durah
05-11-2020

Tender Details

Plwss Durah Khad To Dhawansh , Panvi , Dabbar And Kuadhar In Gp . Lot Nirmand Block Tehsil Anni Distt . Kullu Hp Sh . Const . Of Rcc Intake Chamber 1 No . , Const Of Sed . Tank 10800 Ltrs Capacity , Const . Of Rcc Storage Tank 40000 Ltr , Const . Of Pump House , Toilet And Septic Tank , Site Development , Barbed Wire Fencing And Laying , Jointing And Testing In Trenche

Key Value

Document Fees
INR 400 /-
EMD
INR 50852.0 /-
Tender Value
INR 28.90 Lakhs /-

BOQ Items

Name of Work: PLWSS Durah Khad to Dhawansh, Panvi, Dabbar & Kuadhar in GP. Lot Nirmand Block Tehsil Anni Distt. Kullu HP. (SH:C/O RCC Intake Chamber 1 No., C/O Sed. Tank 10800 ltrs capacity, C/O RCC Storage tank = 40000 ltr, C/O Pump House and attendent Qtr. , Toilet and Septic tank, Site development, barbed wire fencing & Laying, jointing & testing in trenches GI pipe 65mm from point C to B at RD 0 to 3300 = 3300 mtr.)
Sl. No. Item Description Item Code / Make Quantity Units
1 1 Cutting in earth work in all kinds of soil and disposal of excavated earth in all lead & lifts as per the direction of Engineer-in-Charge. 217.5 Cum
2 2 Excavation in foundation and trenches etc. in earth work in all kinds of soil such as pick work, jumper work, blasting soft or hard rock or by chiselling soft or hard rock where blasting is prohibited in all leads and lifts including trimming / dressing of sides and bed, stacking the excavated soil clear from the edge of excavation and returning the excavated soil after completion of work in 15cm layers when required into plinth, sides of foundation etc. consolidating each deposited layers by ramming and watering and then disposing of all surplus excavated soil complete in all respect as per direction and to the entire satisfaction of the Engineer-in-Charge. 1231.07 Cum
3 3 Providing and laying cement concrete 1:4:8(1cement: 4sand:8graded stone aggregate of 40mm nominal size)and curing complete excluding cost of form work including all leads and lifts: a) Foundation and Plinth. 0.32 Cum
4 4 Providing and laying cement concrete 1:3:6(1 cement:3 sand:6 graded stone agg. 40mm nominal size) and curing complete excluding cosot of form work and reinforcement of RCC work in foundation and plinth with in all leads and lifts as per direction and to the entire satisfaction of the Engineer-in-charge. 1.25 Cum
5 5 Providing and laying cement concrete 1:3:6(1 cement:3 sand:6 graded stone agg. 20mm nominal size) and curing complete excluding cosot of form work and in foundation and plinth with in all leads and lifts as per direction and to the entire satisfaction of the Engineer-in-charge. 7.03 Cum
6 6 Providing and laying cement concrete 1:6:12(1cement: 6sand: 12 graded stone agg.40mm nominal size) and curing complete excluding cost of centering and shuttering including all leads and lifts. a) Foundation and plinth 17.32 Cum
7 7 Random rubble masonary/ Polygonal rubble masonary uncoursed or brought to courses with hard stones of approved quality in foundation and plinth including levelling up at plinth level with cement concrete 1:6:12 in cement mortar 1:6 ( 1 cement : 6 sand) as per direction & satisfaction of the Engineer- in- charge upto all lead & lifts. 22.16 Cum
8 8 Providing and laying cement concrete 1: 1½ :3 (1cement:1:1½ sand :3 graded stone agg. 20mm nominal size) and curing com-plete excludidng cosot of form work and reinforcement for RCC work in foundation and plinth with in all leads and lifts as per direction and to the entire satisfaction of the Engineer-in-charge in:-
9 8.01 Foundation,footing basis of columns & the likeand mass concrete. 5.73 Cum
10 8.02 Walls (any thickness) but not less that 0.10 Mtrs. hick including attached pilasters buttresses plinth and string course from top of foundation upto floor two levels. 12.99 Cum
11 8.03 Suspended floors, roofs, landings, shelves and their supports balconies, beams girders bressumers and cantilevers upto floor two levels 2.55 Cum
12 9 Providing and laying cement concrete 1:2:4(1 cement:2 sand:4 graded stone agg. 20mm nominal size) and curing complete excluding cosot of form work and reinforcement of RCC work in all leads and lifts as per direction and to the entire satisfaction of the Engineer-in-charge.
13 9.01 In suspended floor roofs landing shalves & their support balconies, beams, girders bressumers cantilevers upto floor two level 10.4 Cum
14 10 Providing form work with steel plate 3.15 m.m thick welded with angle iron 30x30x5 m.m so as to give a fair finish including centering ,shuttering, propping etc.with wooden battens and ballies height of propping and centering below supporting floor to ceiling upto with wooden batten & ballies all heights and removal of the same for in-situ reinforced conc.and plain conc.work in :-
15 10.01 Flat surface such as soffits and suspended floors, roofs, landings and the like: Floors etc. up to 200mm in thickness within all leads and lifts 95.05 Sqm
16 10.02 Vertical surfaces such as walls (any thickness)portions and the like including attached pilaster buttresses plinth and string course and the like 162.1 Sqm
17 10.03 Beams, cantilever Girders , lintals sides&soffits of beams, beams, haunching cantilever girders, bresssumers and lintels ,not exceeding 1mtr. Depth. 0.88 Sqm.
18 11 Providing tor steel reinforcement for RCC work including bending, binding and placing in position i /c binding wire complete up to floor two level complete in all respect as per direction & to the entire satisfaction of Engineer-in- Charge upto all lead & lifts. 2807.85 Kg
19 12 Steel work welded in built up sections,trusses & framed work i/c cutting,hoisting & fixing in position & applying a priming coat of red paint :-In grating, framed ,guards,bars,ladders, railing,brackets & similar works with in all leads and lifts as per the entire satisfaction & direction of the Engineer Incharge 225.49 Kg.
20 13 Providing and laying cement concrete 1:5:10(1cement:5sand:10 graded stone aggregate of 40mm nominal size) with 15% plum and curing complete excluding cost of form work in retaining walls/breast walls, the size of plums shall usually be 150mm to 300mm as per H.P.P.W.D specification including all leads and lifts 70.2 Cum
21 14 Boulder filling behind the R/wall/ under floor i/c all leads and lifts copmlete in all respect 9.65 Cum.
22 15 Brick work using comman burnt clay building bricks in foundation & plinth with C.M 1:6 ( 1 cement :6 Sand ) with in all leads and lifts as per direction & satisfaction of Engineer -in-charge.( Ist class bricks ) 3.59 cum
23 16 Brick work using comman burnt clay building bricks in super structure above plinth level upto floor two level with C.M 1:6 ( 1 cement :6 Sand ) with in all leads and lifts as per direction & satisfaction of Engineer -in-charge.
24 16.01 (Ist class bricks) 12.65 cum
25 16.02 (IInd class bricks) 27.39 cum
26 17 Pointing on Brick work with cement mortor 1:4 (1cement : 4 Sand) complete with in all lead & lifts and to the entire satisfaction of the Engineer-in-Charge. 81.06 Sqm
27 18 Providing wood work in frames of doors, windows, clearstory window and other frames wrought framd and fixed in position in 1st class Deodar wood complete. as per direction & satisfaction of the Engineer- in- charge upto all lead & lifts. 0.56 Cum
28 19 Providing and fixing panelled glazed or panelled and glazed shutters for doors, windows and clerestory windows i/c bright finished/black enamelled iron butt hinges with necessary screws 2nd class deodar wood 40mm thick including entire carriage of material as per satisfaction of E-in-charge. 13.76 Sqm
29 20 Providing and fixing pressed steel door, frames, manufactured from comercial mild steel sheet of 1.25 mm thickness including hinges jump block Jamb, beed, and if required angle threshold of mil steel angle of section 50x25mm or base ties of 1.25mm pressed mild steel welded or regidly fixed together by machanical means adjustable lugs with split and tails to each Jamb i/c steel but things 2.5mm thick with guards lock strike plate and shock as specified and applying a coat of applying steel primer after pretreatment of the surfaces directed by the Engineer-in-charge 6.45 Rmt
30 21 Providing and laying 40mm thick cement concrete flooring 1:2:4 ( 1cement:2 sand: 4 crushed graded stone aggregate 20 mm nominal size ) laid in one layer finished with a floating coat of neat cement and curing complete as per direction & to the entire satisfaction of Engineer-in- Charge upto all lead & lifts. 1.44 Sqm
31 22 6 mm cement plaster to ceiling in CM 1:3 ( 1Cement :3 Sand) as per direction & satisfaction of the Engineer- in- charge upto all lead & lifts. 77.225 Sqm
32 23 15 mm thick cement plaster in single coat on rough sides of brick/stone masonary concrete walls for interior plastering in single coat on rough sides upto floor two level including arises internal rounded angles, chamfers and/or rounded angles not exceeding 80mm in girth and finished even and smooth in cement mortar 1:6 (1cement:6sand) with in all leads and lifts as per the entire satisfaction & direction of the Engineer - in - Charge. 142.89 Sqm
33 24 20 mm thick cement plaster in single coat on rough sides of brick/stone masonary concrete walls for interior plastering upto floor two level including arises internal rounded angles, chamfers and/or rounded angles not exceeding 80mm girth and finished even and smooth rounded and finished smooth in cement mortar 1:6(1cement:6sand) with in all leads and lifts as per the entire satisfaction & direction of the Engineer - in - Charge. 19.74 Sqm
34 25 White washing with lime on undecorated wall surfaces(two coats) to give an even shade I/c thoroughly brooming the surface to remove all dust dirt & other foreign matter as per direction & to the entire satisfaction of Engineer-in- Charge upto all lead & lifts. 136.09 Sqm
35 26 Distempering with dry distemper of approved brand and manufacture (two coats) and of required shade on undecorated wall surfaces to give an even shade sand papered smooth.as per direction & satisfaction of the Engineer- in- charge upto all lead & lifts. 84.03 Sqm
36 27 Finishing wall with water proofing cement paint of approved brand and manufacture and of rerquired shade on undecorated wall surfaces (two coats) to give an even shade i/c cleaning of oil, dirt, dust & others foreign matters, sand papering and knotting etc. after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials. 52.86 Sqm
37 28 Applying priming coat on new wood and wood based surfaces after and including preparing the surface by thoroughly cleaning oil,greese,dirt and other foreign matters,sand papering and knotting.Ready mixed paint brushing wood primer pink. as per direction & satisfaction of the Engineer- in- charge upto all lead & lifts. 27.53 Sqm
38 29 Painting two coats(excluding priming coat) on new wood and other wood based surface with readymixed enamel paint to give an even shade including cleaning the surface of dirt,dust and other foreign matter,sand papering & stoping with animal paint other then white and as per direction & satisfaction of the Engineer- in- charge upto all lead & lifts. 27.53 Sqm
39 30 Providing & fixing M.S. grills of required pattern in wooden frame of window etc.with M.S. flats, square or round barswith round headedbolts and nuts by screws plain grills. as per direction & satisfaction of the Engineer- in- charge upto all lead & lifts. 70.86 Kg
40 31 Providing and fixing wire gause shutters using galvanised MS wire gauge of IS gauge designation 85 G with wire diameter 0.56mm for doors, windows, clerestorey windows I/c bright finished black enamelled iron hinges with necessary secrews 30 mm thick 2nd class deodar wood with in all leads and lifts as per the entire satisfaction & direction of the Engineer - in - Charge. 2nd class deodar wood. 14.64 Sqm
41 32 Providing and fixing anodised MS sliding door bolts with bolts and nuts screws etc. complete and as per direction & satisfaction of the Engineer- in- charge upto all lead & lifts. 250x16 mm. 1 Nos
42 33 Providing and fixing anodised MS tower bolts ( barrel type) with screws etc. complete and as per direction & satisfaction of the Engineer- in- charge upto all lead & lifts
43 33.01 200x10 mm 3 Nos
44 34 Providing ad fixing anodised MS handles with necessary screws etc. complete as per direction & satisfaction of the Engineer- in- charge upto all lead & lifts. 125 mm. 3 Nos
45 35 Providing & fixing MS Steel sheet Man Hole cover & frame with locking arrangement confirming to IS code & spoecification of size 560mm diameter complete in all respect 1 Nos
46 36 Providing & fixing of steel / fabrication reinforcement concrete SFRC MH cover with frame confirming to IS code12592 part -I 1998 with latest ammendments 560mm dia. (Medium Duty) with in all lead & lifts 1 Nos
47 37 Providing & fixing of brass fully wheel valves with hand wheel as par IS 780 class-I up to 300mm dia. i/c brass spindle as per 1S-2906 class C-II for dia more than 300mm dia complete with bolts & nuts, rubbers, insersation, inlet & outlet pipe from storage tank 65 mm dia.
48 37.01 Inlet & outlet pipe and Scour Pipe from storage tank 65 mm dia. 3 Nos
49 38 Providing & fixing of C.I pipe for ventilation of 100mm dia . 1mt height with C.I Cowl fixed on top complete as per the direction of Engineer-in charge 1 mtr
50 39 Half brick work using common burnt clay building bricks in superstructure above 1st floor level in cement mortar 1:4( 1Cement, 4 Sand ) of 2nd class bricks complete in all respect with in all leads and lifts. 10.4 Sqm
51 40 Providing and fixing aluminium tower bolts ( barrel type) anodised transparent or died to required shade with necessary screws complete in all respect. ( 250X10 ) 30 Nos
52 41 Providing and fixing aluminium sliding door bolts anodised colour and shade with nuts and screws complete in all respect. ( 250X16 ) 2 Nos
53 42 Providing and fixing aluminium handles anodised,transparent or died to required shade with necessary screws complete in all respect. ( 100 mm ) 20 Nos
54 43 White glazed tiles 6 mm thick in skiriting rises of steps and dado 12 mm thick cement motor 1:3 (1 cement 3 sand ) and jointed with cement slury 2.34 Sqm
55 44 White glazed tiles 6 mm thick in flooring cement motor 1:3 (1 cement 3 sand ) finished with flush pointing in white cement . 1.44 Sqm.
56 45 Providing 40x3 mm flat iron hold fast 40cm. Long including fixing to frame with 10mm dia metres bolts, nuts and wooden plug and embedding in cement concrete block 30x10x15cm. 1:3:6( 1cement:3sand:6 graded stone att. 20mm nominal size) within all leads and lifts and as directed by the Engineer-in-charge. 30 Nos
57 46 Providing plinth protection 50 mm thick in cement concrete 1:3:6 (1 cement: 3 sand: 6 graded stone aggregate 20 mm nominal size as per direction & satisfaction of the Engineer- in- charge upto all lead & lifts. 14.47 Sqm.
58 47 Providing and placing ( at all hights) polyethylene water storage tank ISI-12701 Marked indicating the BIS license no. with cover & suitable locking arrengement & making necessary holes for inlet, outlet & over flow pipes includingall fittings & float balve excluding the base support for tank ( Sintex, Electroplast, Star, Lotus or euqivalent having valied ISI license).500 lts. capacity. 1 No.
59 48 Providing and fixing to wall ceiling and floor galvanised mild steel tubes (Medium grade) tube fittings and clamp including making good the wall ceiling and floor complete in all respect and to the entire satisfaction of the Engineer- in- charge in all lead & lifts.) 15 mm nominal bore 12 Rmt
60 49 Providing and fixing vitreous china wash down water closet (Anglo Indian, uropen type) with integral P or S trap including jointing the trap with soil pipe in cement mortar 1 : 1 ( 1 cement 1 sand) ( Seat and cover to be measured and paid for separately) (White colour)Anglo Indian universal closet. 1 Nos.
61 50 Providing and fixing plastic seat (Solid/Hollow type) and cover for wash down water closet with C.P. brass hinges and rubber buffers :- solid type white plastic seat and cover in all leads and lifts. 1 Nos.
62 51 Providing and Fixing PVC low level flushing cistern with manually controlled device ( handle lever) coforming to IS: 7231, with all fitting & fixtures complete10 ltrs capacity- White. 1 Nos.
63 52 Providing and Fixing PVC/ GI inlet connection for flush pipe connecting with WC pan ISI marked complete including fixing with approved etc. 1 Nos.
64 53 Providing and fixing brass stop cock ( Concealed) of standard design & of approved make coforming to IS: 8931. 15mm nominal bore. complete in all leads and lifts. 1 Nos.
65 54 Providing and fixing CP brass angle balve of standard design & of approved make. 15mm nominal bore. complete in all leads and lifts. 2 Nos.
66 55 Providing and fixing CP water jet including connection pipe with check nut complete in all leads and lifts. 1 Nos.
67 56 Providing & fixing PVC pipe of 10.00 Kg. F/Cm Sqm. Working pressure including fittings as per requirement at site. 110 mm OD. complete in all respect and to the entire satisfaction of the Engineer- in- charge in all lead & lifts.) 10 Rmt.
68 57 provinding and fixing brass full way valve of superior quality of the following dia
69 57.01 25 mm 2 Nos
70 57.02 32 mm 1 Nos
71 58 Providing & fixing of 1.80 Mtrs. high fencing with 2.50Mtrs. angle iron posts 50x50x6 mm 2.5Mtrs.centre to centre with nine horizontal line and two diagonals of galvanized steel barbed wire (IS: 278-1962 Type-I) weighting 9.38 Kg./ per 100Mtrs.minimum strained fixed to posts with G.I. staples i/c providing red oxide paint to post all leads and lifts. the item i/c cost of post, barbed wire and fixing etc. complete. 50.03 Rmt
72 59 Laying jointing of G.I pipes (L.G) ,tube fitting in trenches i/c earth work complete for inlet, outlet and scour pipe including all leads and lifts. (L.R)
73 59.01 80mm (LG) 18 Rmt
74 59.02 65mm (LG) 18 Rmt
75 59.03 65mm (MC)Gravity main and distribution pipe line 3300 Rmt
76 60 Fixing CI Sluice valve (with hand wheel) as per IS : 780-1984 class-I upto 300mm dia.(i/c brass spindle & as per 2906-1984class-II for dia.> 300 mm) complete with bolts nuts,rubber insertion etc.,(the tail piece if req-uired shall be measured & paid for separatly including all leads and lifts:
77 60.01 80mm diameter 3 Nos.
78 61 Fixing of fencing panel of size 1.80+1.20 m as direction and entire satisfaction of Engineer in charge. 26 Nos.
79 62 Applying priming coat over new steel and other surfaces after and including preparing foreign matters and scoured with wire brushes fine steel wood scrapers and sand paper complete with Ready mixed priming paint i/c all leads, lifts and carriage of material as per direction of engineer -in-charge. 112.32 Sqm
80 63 Painting two or more coats on new steel or steel based surfaces excluding primer with ready mixed paint brushing to give an even shade including cleaning the surface. 112.32 Sqm
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail