Department Of Local Bodies has published Construction Of Conference Hall With Toilet In Front Of Gss School Ward No . 07. Submission Date for this Tender is 10-11-2020. Building Work Tenders in ASIND Rajasthan. Bidders can get complete Tender details and download the document.
Name of Work: ????? ??. 07 ??.?.??.?????? ??? ?????? ?? ????? ??????????? ??? ?? ?????? ??????? ????? | |||||
---|---|---|---|---|---|
Sl. No. | Item Description | Item Code | Quantity | Units | |
1 | 1 | Earth work in excavation in foundation, trenches etc. including\ndressing of sides and ramming of bottoms, including getting out the excavated material, refilling after laying pipe/ foundation and\ndisposal of surplus excavated material at a lead upto 50m suitable site as per direction of Engineer for following depths, below natural ground / Road top level.In all types soils/ saturated soil such as moorum, sand, sandy silt, clay, black cotton soil, kankar, etc.Depth upto 1.5 m | 100 | Cum | |
2 | 2 | Diluting and injection Chloropyrifos Emulsifiable concentrate 20% with 1% concentration for PRE-CONSTRUCTIONAL Anti termite treatment as per IS 6313 part III as amended from time to time and creating a continuous chemical barrier under and around the column pits, wall trenches, basement excavation, top surface of plinth filling, junction of wall and floor along the external perimeter of building expansion joints, over the top surface of consolidated earth of which approach is to be laid surrounding of pipes and conduits etc. complete as per specification (Plinth floor area only shall be measured for payment and excluding the cost of chemical emulsion). | 150 | Sqm | |
3 | 3 | Filling with locally available river sand at all levels including watering ramming consolidating and dressing complete including cost of sand. | 60 | Cum | |
4 | 4 | Providing and laying in position cement concrete including curing compaction etc . Complete in specified grade excluding the cost of centering and shuttering All work up to plinth level. 1:4:8 ( 1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) | 35 | Cum | |
5 | 5 | Random rubble masonry with hard stone in foundation and plinth :Cement mortar 1:6 (1 cement : 6 coarse sand) | 100 | Cum | |
6 | 6 | Reinforcement for R.C.C. work at all levels including straightening, cutting, bending, placing in position and binding all complete.Thermo-Mechanically Treated bars. | 5000 | kg | |
7 | 7 | Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centring, shuttering, finishing and reinforcement - All work upto plinth level :1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm\nnominal size) | 20 | Cum | |
8 | 8 | Centring and shuttering with plywood or steel sheet upto two stories or height upto 7.5 metre above plinth level including strutting, propping etc. and removal of form for :Foundations, footings, bases of columns, etc. for mass concrete. | 50 | Sqm | |
9 | 9 | Brick work with FPS bricks of class designation 75 in superstructure above plinth level upto two stories in all shapes and sizes in :Cement mortar 1:6 (1 cement : 6 coarse sand) | 25 | Cum | |
10 | 10 | Half brick masonry with FPS bricks of class designation 75 in\nsuperstructure above plinth level upto two stories. :cement mortar 1:4 (1 cement : 4 coarse sand) | 15 | Sqm | |
11 | 11 | Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. upto two stories excluding cost of centring, shuttering, finishing and reinforcement :1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm\nnominal size). | 15 | Cum | |
12 | 12 | Reinforced cement concrete work in beams, suspended floors,\nroofs having slope upto 15° landings, balconies, shelves, chajjas,\nlintels, bands, plain window sills, staircases and spiral stair cases upto two stories excluding the cost of centring, shuttering, finishing and reinforcement:M-20 Grade Concrete (1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) -As per design mix) | 60 | Cum | |
13 | 13 | Centring and shuttering with plywood or steel sheet upto two stories or height upto 7.5 metre above plinth level including strutting, propping etc. and removal of form for :Columns, Pillars, Piers, Abutments, Posts and Struts. | 25 | Sqm | |
14 | 14 | Centring and shuttering with plywood or steel sheet upto two stories or height upto 7.5 metre above plinth level including strutting, propping etc. and removal of form for :Lintels, beams, plinth beams, girders, bressumers and cantilevers. | 40 | Sqm | |
15 | 15 | Centring and shuttering with plywood or steel sheet upto two stories or height upto 7.5 metre above plinth level including strutting, propping etc. and removal of form for :Suspended floors, roofs, landings, balconies and access platform. | 250 | Sqm | |
16 | 16 | P & F 1.6 mm thick M.S. Recessed fan box, hexagonal/\nround of size 100 mm dia, depth 75mm, 12 mm dia rod\nfan hook with 100 mm length extended on each side . | 4 | Each | |
17 | 17 | S&F following sizes (dia.) of ISI marked medium duty PVC conduit along with accessories in surface / recessed using saddles, clamps, fastener as required including cutting the wall and making good the same as required. 25 mm | 50 | Rmt | |
18 | 18 | Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2\ncoarse sand : 4 stone aggregate 10mm and down gauge) including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design :In 75x75mm deep chase | 60 | Rmt | |
19 | 19 | Grading roof for water proofing treatment with Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone\naggregate 20 mm nominal size) | 25 | Cum | |
20 | 20 | Chequered terrazo tiles 22 mm thick with graded marble chips of\nsize up to 6 mm in floors jointed with neat cement slurry mixed with pigment to match the shade of the tiles including rubbing and polishing complete on 20 mm thick bed of cement mortar 1:4 (1 cement :4 coarse sand) :Ordinary cement without any pigment. | 350 | Sqm | |
21 | 21 | Cement plastering including T&P, scaffolding, material and complete labpour, including cost of water, curing, racking of joints etc. with 12 mm cement plaster of mix :1:4 (1 cement : 4 fine/ coarse sand) | 500 | Sqm | |
22 | 22 | Neat cement punning | 25 | Sqm | |
23 | 23 | Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete | 500 | Sqm | |
24 | 24 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade New work (two or more coats) over and including priming coat with\ncement primer. | 500 | Sqm | |
25 | 25 | Painting with synthetic enamel paint of approved brand and\nmanufacture to give an even shade :Two or more coats on new work | 50 | Sqm | |
26 | 26 | Providing and fixing 1mm thick M.S. sheet door with frame of\n40x40x6mm angle iron and 3mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer.Using M.S. angels 40x40x6 mm for diagonal braces. | 5 | Sqm | |
27 | 27 | Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2mm and braced with flat iron diagonals 20x5mm size with top and bottom rail of T-iron 40x40x6mm with 40mm dia, steel pulleys complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer. | 2.5 | sqm | |
28 | 28 | Providing and fixing double glazed hermetically sealed glazing in\naluminium windows, ventilators and partition etc. with 6 mm thick clear float glass both side having 12 mm air gap including providing EPDM gasket, perforated aluminium spacers, desiccants, sealant (Both primary and secondary sealant ) etc. as per specifications, drawings and direction of Engineer-in-charge complete. | 6 | Sqm | |
29 | 29 | Providing and fixing factory made ISI marked steel glazed doors,\nwindows and ventilators side /top /centre hung with beading and all members such as F7D, F4B, K11 B and K12 B etc. complete of standard rolled steel sections, joints mitred and flash butt welded and sash bars tenoned and rivetted with 15x3mm lugs, 10cm long, embedded in cement concrete blocks 15x10x10cm of 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) or with wooden plugs and screws or rawl plugs and screws or with fixing clips or with bolts and nuts as required, including providing and fixing of hinges, pivots, float glass panes with glazing clips and special metal sash putty of approved make and a priming coat of approved steel primer excluding the cost of metal beading and other fittings except necessary hinges or pivots complete as per approved design. | 6 | Sqm | |
30 | 30 | Kota stone slab flooring 25mm thick over 20 mm (average) thick\nbase laid over and jointed with grey cement slurry mixed with\npigment to match the shade of the slab including rubbing and\npolishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) :Area of each slab 900 to 2000 sqcm | 250 | Sqm | |
31 | 31 | Providing and fixing 1st quality MAT finished ceremic tile size\n300x300mm confirming to IS : 13755 and IS : 15622 colour such as white, grey, ivory, fume red brown, light green, light blue and other light shades in floors, steps, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in the white cement mixed with pigment to match the shade of the tile complete (including the cost of cement mortar bed 1:4). | 20 | sqm | |
32 | 32 | P & F 1st quality Vitrified Porcelain Polished tiles on floor, skirting and steps etc.in different sizes (thickness to be specified by manufactuer) with water absortion less than 0.08% and conforming to IS 15622 of approved make in all colour and shade, laid with 20 mm thick CM 1 : 4 including grounting the joints with white cement and matching pigment etc complete.Size 600 mm X 600 mm | 25 | Sqm | |
33 | 33 | Providing and fixing Granite stone slab mirror polished and machine edge cut in walls, pillars, steps, Shelves, Sills Counters, Floors etc. laid on 12mm (Av.) thick base of cement mortar 1:3 (1 cement : 3 coarse sand) jointing with white cement mortar 1:2 (1white cement : 2 marble dust) with pigment to match the shade of the marble slab including grinding, rubbing and polishing complete.Jhunjhunu / Jalore (Red / Choclate Colour Upto to 1500 Cm2 Tiles | 15 | Sqm | |
34 | 34 | Extra for providing edge moulding to 15-18mm thick marble/ Granite stone counters, Vanities etc. including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge.Granite Work | 10 | Rmt | |
35 | 35 | Providing sand stone slab for roofing and laying them in cement\nmortar 1 : 4 (1 cement : 4 coarse sand) over wooden karries or\nR.C.C. battens (Karries and battens to be paid separately) including pointing the ceiling joints with cement mortar 1:3 (1 cement : 3 fine sand ) complete :Red sand stone slab40 to 50 mm thick | 6 | Sqm | |
36 | 36 | Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering - All work upto plinth level :1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) | 10 | Cum | |
37 | 37 | Providing and fixing on wall face Unplasticised Rigid PVC Single\nsocketed pipes rain water pipes conforming to IS : 13592 Type A\nincluding jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion.110 mm diameter | 25 | Rmt | |
38 | 38 | Providing and fixing on wall face Unplasticised - PVC moulded\nfittings/ accessories for Unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. | 10 | Each | |
39 | 39 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,\nhaving thermal stability for hot & cold water supply including all\nCPVC plain & brass threaded fittings. This included jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.20 mm nominal outer dia .Pipes. | 60 | Rmt | |
40 | 40 | Providing and fixing water closet squatting pan (Indian type W.C.\npan ) with 100mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required :White Vitreous china Orissa pattern W.C. pan of size 580x440mm with integral type foot rests. | 4 | Each | |
41 | 41 | Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350mm and 340x410x265mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required :One urinal basin with 5 litre white P.V.C. automatic flushing cistern. | 4 | Each | |
42 | 42 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P.\nbrass pillar taps,32 mm C.P. brass waste of standard pattern,\nincluding painting of fittings and brackets, cutting and making good the walls wherever require :White Vitreous China Flat back wash basin size 450x300 mm with single 15 mm C.P. brass pillar tap. | 2 | Each | |
43 | 43 | Providing and fixing 600x450 mm beveled edge mirror of superior\nglass (of approved quality) complete with 6 mm thick hard board\nground fixed to wooden cleats with C.P. brass screws and washers complete. | 2 | Each | |
44 | 44 | Providing and placing on terrace (at all floor levels) polyethylene\nwater storage tank ISI : 12701 marked with cover and suitable\nlocking arrangement and making necessary holes for inlet, outlet\nand overflow pipes but without fittings and the base support for tank | 500 | per ltr | |
45 | 45 | Providing and fixing PTMT bib cock of approved quality and colour.15mm nominal bore, 86 mm long. Weighing not less than 88 gms. | 10 | Each | |
46 | 46 | Providing and fixing C.P. brass angle valve for basin mixer and\ngeyser points of approved quality conforming to IS:8931 | 4 | Each | |
47 | 47 | SITC of ISI mark( IS:8472) self priming monoblock pump set of approved make, TEFC, permanent split capacitor type (PSC), fitted with thermal overload protection, mechanical seal, 1440/1500 RPM, single phase(180 to 240 V). Including cost of hardware etc on existing platform complete. Pump shall have following HP Rating, phase, Head, minimum Discharge respectively.0.25 HP, 1-Ø, (6-18)Mtr, (27-12)LPM | 1 | Each | |
48 | 48 | Wiring of light point / fan point / exhaust fan point / call\nbell point with 1.5 sq. mm FR PVC insulated unsheathed\n1.1kV grade flexible copper conductor and 1.5 sq.mm\nFR PVC insulated copper earth conductor (IS:694) of\napproved make in double lock/ ISI marked single lock\npvc casing capping & it's accessories, 18 SWG M.S.\nbox with earth terminal, screwless cage connectors for\nneutral looping in switch board & false ceiling point, 6 A\nswitch 3.0 mm thick phenolic laminated sheet, zinc\nplated / brass screws, cup washers , making\nconnections, testing etc. as required. | 25 | Each |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail