}

Repair /Replacement Works To Electric Installations , Earthings , Calibration Of Relays , Lt Ug Cables , Lights And Connected Works At Tkd Under Ge Babina, GE BABINA-Uttar Pradesh

Military Engineer Services-MES has published Repair /Replacement Works To Electric Installations , Earthings , Calibration Of Relays , Lt Ug Cables , Lights And Connected Works At Tkd Under Ge Babina. Submission Date for this Tender is 16-11-2020. Electrification Work Tenders in GE BABINA Uttar Pradesh. Bidders can get complete Tender details and download the document.




Tender Notice

25845110
Repair /Replacement Works To Electric Installations , Earthings , Calibration Of Relays , Lt Ug Cables , Lights And Connected Works At Tkd Under Ge Babina
Open Tender
Indian
Uttar Pradesh
GE BABINA
16-11-2020

Tender Details

Repair /Replacement Works To Electric Installations , Earthings , Calibration Of Relays , Lt Ug Cables , Lights And Connected Works At Tkd Under Ge Babina

Key Value

Document Fees
INR 500 /-
EMD
INR 90000.0 /-
Tender Value
Refer document

BOQ Items

Name of Work: REPAIR /REPLACEMENT WORKS TO ELECTRIC INSTALLATIONS, EARTHINGS, CALIBRATION OF RELAYS, LT UG CABLES, LIGHTS AND CONNECTED WORKS AT TKD UNDER GE BABINA
Sl. No. Item Description Item Code / Make Quantity Units
1 1 Supply, erecting and fixing in true vertical position, prestressed concrete pole 9.0 mtr long 102 mm x 172 mm at top and 152 mmx 279 mm at bottom class 10 (Numbering of the poles shall be done with synthetic enameled painted letter of shape & size) including taking down of old unserviceble pole & shifting of cross arms ACR conductor , GI wire, insulator, street light brackets etc complete all as directed. Note :- Excavation incl earth work and PCC foundation will be measured and paid separately. The old unserviceable pole obtained from dismanting shall be remove by the contractor form cantt area/MOD. If the contractor has not removed the dismantled item a penality of Rs.500.00 per pole will be charged from the contractor as a penality. Make : Hindustan Pressed concrete Faridabad / M/s Indian PCC poles / M/s Concrete Ugyog Jhansi 20 Each
2 2 M&L for replacement of new generation energy saving and environmental friendly long life LED street light made up of innovative die cast aluminium housing high power LED as lighting source with IP - 66 power consumption 45 watt complete input voltage of 150-240 Volt (nominal rated voltage 240 Volt) complete including taking down of old unserviceable street light any type/any capacity including replacement of twisted 3 core copper cable of size 1.5 Sqmm dia for connecting phase, neutral and earth from junction box to LED light throgh cpper connectos all as specified and directed. Make Bajaj Cat part No BRTFG45 or equivalent in Havells/Philips/Wipro 75 Each
3 3 Description all as per item No 2 above but of capacity 90 Watt and ditto- . Make Bajaj Cat part No BRTFG90 or equivalent in Havells/Philips/Wipro 50 Each
4 4 M&L in replacement of new generation energy saving and environmental friendly long life LED flood light made up of innovative die cast aluminium housing high power LED as lighting source with IP - 66 power consumption 100 watt colour white complete input voltage of 150-240 Volt (nominal rated voltage 240 Volt) complete including taking down of old unserviceable flood light any type/any capacity including replacement of twisted 3 core copper cable of size 2.5 Sqmm dia for connecting phase, neutral and earth from junction box to light through connectors all as specified and directed.(Make :- Bajaj Cat part No BJFL100 LED I /Havells/Philips) 25 Each
5 5 Description all as per item No 4 above but of capacity 50 watt 25 Each
6 6 S & F GI brackets for fixing LED street light fitting fabricated out of GI tubing 40 mm dia, medium grade, 1.2 mtr long , bend to 120 degree shape by cutting, welding and well finishing including MS clamp of flat iron of size 32 x 6 mm -02 Nos complete for steel poles / PCC pole as per site requirement with nut, bolt & washers for fixing of GI bracket complete all as specified and directed. Make : TATA/JINDAL/ZENITH/PRAKASH SURYA 100 Each
7 7 S&F in replacement kiosk box for luminaires ,weather proof made out of HDPE/FRP housing fire retardant, non fusing, shock & rust proof, single piece moulded and cover with hinged door, pole mounting type comprising of four pole copper connectors of 16 Amps capacitywith 6 Amp MCB single pole , of minimum size 300x200x125mm, IP 66 fixed on pole with MS, clamps 30x5mm with necessary nuts, washer and incl applying two coats of synthetic enamel paint over a red oxide primer on steel surface/clamps and embossing/painting of Danger sign of size not less than 10cms x 7.5cms with letter and conventional skull and bones in single red color on front face of kiosk box complete all as directed. The quoted rate also includes cost for material & repalcement of 4 sqmm multistranded twincore aluminium cable ISI marked from overhead conductor to junction box and replacement of 3 core copper cable of 1.5 Sqmm ISI marked from junction box to security light length as per required at site. 400 Each
8 8 S&F in replacement kiosk box for luminaires ,weather proof made out of HDPE/FRP housing fire retardant, non fusing, shock & rust proof, single piece moulded and cover with hinged door, pole mounting type comprising of two pole copper connectors of 16 Amps capacitywith 6 Amp MCB single pole , of minimum size 300x200x125mm, IP 66 fixed on pole with MS, clamps 30x5mm with necessary nuts, washer and incl applying two coats of synthetic enamel paint over a red oxide primer on steel surface/clamps and embossing/painting of Danger sign of size not less than 10cms x 7.5cms with letter and conventional skull and bones in single red color on front face of kiosk box complete all as directed. The quoted rate also includes cost for material & repalcement of 4 sqmm multistranded twincore aluminium cable ISI marked from overhead conductor to junction box and replacement of 3 core copper cable of 1.5 Sqmm ISI marked from junction box to security light length as per required at site. 300 Each
9 9 M&L for earthing complete including necessary excavation and earth work in any type of soil with galvanized steel earth plate electrode size 60 cm x 60 cm x 6 mm thick buried directly in ground (earth pit not less than 2.25 mtrs below ground level) with top edge of the earth plate not less than 1.5 mtr below normal ground level connected to galvanised earth lead 4.0 mm dia by means of bolts nuts check nuts and washers of galvanised iron or steel all as shown in electrical plate No.5 of MES SSR Part-1 connected to main switch board or main control board all as specified and testing on completion including provision of earth wire protected by galvanised iron 40 mm dia. light grade pipe and watering pipe shall be 20 mm ore medium grade PCC pipt with pre cast RCC cover, charcoal/salt funnel etc. complete all as directed. Note : The conctrete pit shall be PCC 1:3:6 type C1, 40 mm thick PCC slab of RCC (1:2:4) type B-1 using 20 mm graded stone aggregate reinforced with 8 mm TMT bars on both sides with suitable cast iron handle shall be provided in lieu of cast iron cover shown in electrical plate No.5 of MES SSR Part-1 (ii) PCC pits shall be provided atleast 500 mm away from the pit and not on the earth pit itself and the extra cost of additional length of watering pipe, bends, elbows etc shall be deemed to included in the quoted rate. 10 Each
10 10 Disconnecting power supply from defective/unserviceable street light/security light/high mast light/flood light fitted on 11 mtr/9 mtr/8.5 mtr poles and testing/checking for defects, testing LED drivers, fuse, testing kisok box, over head line connection , tighteneing of loose nuts bolts of GI brackets on pole, checking connecting wire from pole etc and fixing the repaired/services light fittings on poles and testing & commisining of lights. Note :- (i) All spare like LED drivers, connecting cable, pole box, MCB in pole box etc and refixing in replacement will be measured & paid separately under relevent item. (ii) All necessary T&P (like ladder of suitable height and safety belt) for testing & repair of light fitting will be provided by contractor with out any extra cost. (iii) Contractor will carry out daily repairs & maintenance of security lights as directed. Contractor has to understand the nature of wks under this item & quote his rate accordingly. (iv) Complaints of unserviceable light fittings will be given by JE E&M to contractor/contractor's rep to technician on mobile phone followed by writing. Contractor has to arrange required material , T&P & safety equipments to repair the security lights within 24 hours from the time of intimation failing which a penality of Rs.500/- per light per day (beyond 24 Hrs) will be charged and recovered from contgractor dues. 500 Each
11 11 S &F in replacement of LED drivers of LED street light/flood light of any makeof capacity 30 Watt to 60 watts including replacement of old unserviceable burnt drivers complete 100 Each set
12 12 Description all as per item no 11 of above but size 70 watt to 90 watt 100 Each set
13 13 Description all as per item no 11 of above but size 100 watt to 150 watt 50 Each set
14 14 S&F in testing & commisioning of LED bulb panel inside LED flood/security light of capacity 30 watt to 70 watt including taking down old unserviceable LED panel including replacement through soldering etc complete. Qouted rate includes necessary part reuired for repalcement for commisiioning of LED lights. 150 Each set
15 15 Description all as per item no 14 of above but size 90 watt to 150 watt 100 Each set
16 16 Supplying, laying, jointing & commissioning of cable XLPE insulated screened PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) with stranded aluminum conductor, 11000 volts grade, (Earthed) cross sectional area 95 sqmm 3 core as per IS 7098 Pt-II complete all as specified. Make :- KEI/Havells/Universal cables/ Polycab/ INCAB/India cable Co 500 RM
17 17 Supply,laying and testing of cable XLPE insulated,screened,PVC bedded galvanized steel strip or wire armoured electric power cable (heavy duty) 1100 V grade with multi stranded aluminium conductor of size 95 sqmm 3.5 core as per IS 7092 Pt-I complete all as specified and as directed. Make :- KEI/Havells/Universal cables/ Polycab/Plaza/ INCAB/India cable Co 100 RM
18 18 All as per item No 17 here in above but of size 70 sqmm 3.5 core and ditto- 100 RM
19 19 All as per item No 17 here in above but of size 50 sqmm 3.5 core and ditto- 150 RM
20 20 All as per item No 17 here in above but of size 25 sqmm 4 core and ditto- 500 RM
21 21 All as per item No 17 here in above but of size 16 sqmm 4 core and ditto- 200 RM
22 22 All as per item No 17 here in above but of size 10 sqmm 4 core and ditto- 1000 RM
23 23 All as per item No 17 here in above but of size 10 sqmm 2 core and ditto 1000 RM
24 24 S&F in replacement of 1100 Volts grade heavy duty ISI marked cable PVC insulated stranded aluminium conductor one twin core cable flat or circular of size 16 sqmm served with inner sheathing of PVC tape & overall PVC sheathed in service connections , of following sizes. Make :- Havells/ Plaza cables/ polycab /Finolex 100 RM
25 25 Description all as per item No. 24 above but one twin core cable flat or circular of size 10 sqmm 300 RM
26 26 Description all as per item No. 24 above but one twin core cable flat or circular of size 6 sqmm 300 RM
27 27 Description all as per item No. 24 above but one twin core cable flat or circular of size 4 sqmm 500 RM
28 28 S & F in replacement of MCCB, 04 Pole, capacity 40 Amps with ultimate breaking capacity 16 KA at 415 volts with fixed thermalsettings conforming to IEC 60947 Part-I/IS-13947 Part-I , (Ics=Icu=100%) in the existing panel with suitable connecting copper terminals at site complete all specified and directed. Make :- ABB/SCHNIEDER/AREVA /GE INDIA/L&T/Havells/LEGRAND 10 Each
29 29 Description all as per item No 28 here in above but of capacity 63 Amps with ultimate breaking capacity 16 KA and ditto- 10 Each
30 30 Description all as per item No 28 here in above but of capacity 100 Amps with ultimate breaking capacity 25 KA and ditto- 10 Each
31 31 Description all as per item No 28 here in above but of capacity 160 Amps with ultimate breaking capacity 25 KA and ditto- 6 Each
32 32 Description all as per item No 28 here in above but of capacity 200 Amps with ultimate breaking capacity 25 KA and ditto- 5 Each
33 33 Description all as per item No 28 here in above but of capacity 250 Amps with ultimate breaking capacity 25 KA and ditto- 2 Each
34 34 Description all as per item No 28 here in above but of capacity 315 Amps with ultimate breaking capacity 35 KA and ditto- 2 Each
35 35 Description all as per item No 28 here in above but of capacity 400 Amps with ultimate breaking capacity 35 KA and ditto- 4 Each
36 36 Description all as per item No 28 here in above but of capacity 630 Amps with ultimate breaking capacity 50 KA and ditto- 1 Each
37 37 Supply and fixing in repairs, testing, commissioning of factory made Auto Power Factor Corrector Capacitor panel having aggregate capacity 150 KVAR in 10 stage with micro processor based control, factory made indoor type, platform mounted, suitable for 415 Volt 3 phase 4 wire, 50 Hz AC supply system, having duly insulated 600 Amp TPN copper busbars, dust and vermin proof, IP 54 class protection and made of 2 mm CRCA MS sheet and 40x40x6mm thick angle iron frame work, powder coated finishover one coat coat of red oxide primer outside and two coat red oxide primer on inside, both side opening type, with aprons for cable entry, with double door shutter and locking arrangement with lock,internal wiring with PVC insulated,solid copper conductor cables ISI marked adequate size and comprising of followings:- (i). Main incoming MCCB 400 Amp 50 KA 4 pole - 01 No (ii). Auto power factor relay upto 10 stage Microprocessor based, modular type, intelligent APFC relay capable of having self switching ON/OFF to any capacitor suitable to maintain power factor between 0.80 to 0.99 with digital induction of power factor, preset parameters and having inbuilt capability of induction abd elimination of defective capacitor steps make LT/Siemens/ABB - 01 No (iii). Power capacitor MPP-H ype with suitable capacity power contactors and MCCBs of under mentioned capacity :- 30 KVAR -02 Nos, (b 20 KVAR - 03 Nos (c) 10 KVAR - 02 Nos (d) 5 KVAR - 02 Nos (iv) cooling fan, (v) Auto/ manual operation selection switch (vi) ON-OFF push button (vii)) indicating LED light for capacitor ON/OFF position equivalent in crompton greaves/siemens/ABB. Note :- (i) The equipment offered shall be complete in all respects. Any materialand components not specifically stated in the specification but which is necessary for trouble free operation of the equipment and acessories specified in the specification shall be deemed to be includes unless specifically excluded. The equipment shall confirm in all respect to high standards of engineering design and workman ship and shall capable of performing in continuous operation. (ii) The old mateial will be (given byold unserviceable LT panel in lieu of cap bank pabel ) contractors property under sch of credit. Make :- Shalbh/Mclyer/Universl switch gear 1 Each set
38 38 Supply and fixing in repairs, testing, commissioning of factory made Auto Power Factor Corrector Capacitor panel having aggregate capacity 100 KVAR in 10 stage with micro processor based control, factory made indoor type, platform mounted, suitable for 415 Volt 3 phase 4 wire, 50 Hz AC supply system, having duly insulated 500 Amp TPN copper busbars, dust and vermin proof, IP 54 class protection and made of 3 mm CRCA MS sheet and 40x40x6mm thick angle iron frame work, powder coated finishover one coat coat of red oxide primer outside and two coat red oxide primer on inside, both side opening type, with aprons for cable entry, with double door shutter and locking arrangement with lock,internal wiring with PVC insulated,solid copper conductor cables ISI marked adequate size and comprising of followings:- (i). Main incoming MCCB 250 Amp 50 KA 4 pole - 01 No (ii). Auto power factor relay upto 10 stage Microprocessor based, modular type, intelligent APFC relay capable of having self switching ON/OFF to any capacitor suitable to maintain power factor between 0.80 to 0.99 with digital induction of power factor, preset parameters and having inbuilt capability of induction abd elimination of defective capacitor steps make LT/Siemens/ABB - 01 No (iii). Power capacitor MPP-H ype with suitable capacity power contactors and MCCBs of under mentioned capacity :- 30 KVAR -01 Nos, (b 20 KVAR - 03 Nos (c) 10 KVAR - 02 Nos (d) 5 KVAR - 02 Nos (iv) cooling fan, (v) Auto/ manual operation selection switch (vi) ON-OFF push button (vii)) indicating LED light for capacitor ON/OFF position equivalent in crompton greaves/siemens/ABB. Note :- (i) The equipment offered shall be complete in all respects. Any materialand components not specifically stated in the specification but which is necessary for trouble free operation of the equipment and acessories specified in the specification shall be deemed to be includes unless specifically excluded. The equipment shall confirm in all respect to high standards of engineering design and workman ship and shall capable of performing in continuous operation. (ii) The old mateial will be (given byold unserviceable LT panel in lieu of cap bank pabel ) contractors property under sch of credit. Make :- Shalbh/Mclyer/Universl switch gear 1 Each set
39 39 M&L fo replacement of double pole HRC type rewireable switch fuse unit of 230 Volt 50 Hz single phase of capacity 32 Amp including MS box with backelite fuse & fuse carrier fittings, operating insulated handle, top cover necessary locking arrangemnts etc as per IS/IEC 60947 1&3 including necessary wall mounting fitting as directed including taking down the existing all as specified and directed. Make : INDOASIAN/HAVELLS/LT 10 Each
40 40 M&L fo replacement of TPN HRC type rewireable switch fuse unit of 415 Volt 50 Hz three phase of capacity 32 Amp including MS box with backelite fuse & fuse carrier fittings , operating insulated handle, top cover necessary locking arrangemnts etc as per IS/IEC 60947 1&3 including necessary wall mounting fitting as directed including taking down the existing all as specified and directed. Make : INDOASIAN Cat part No. DTPN032 or equivalent in L&T/Havells 30 Each
41 41 Description all as per item No 40 above but of capacity TPN 63 Amp and ditto- 10 Each
42 42 Description all as per item No 40 above but of capacity TPN 100 Amp and ditto- 12 Each
43 43 Description all as per item No 40 above but of capacity TPN 200 Amp and ditto- 10 Each
44 44 S&F for replacement & testing commissioning of outdoor type bus bar panel weather proof MS cubical panel board made of 3 mm CRCA MS sheet outdoor type of size 110 cm x 80 cm x 40 cm, 4 Nos of aluminium bus bar of 300 Amp capacity with MCCB 4 pole of Capacity 200 Amp 25 KA (Ics =Icu=100%) including one coat of redoxide and two coat of enamel paint powder coated, mounted on mounted on angular frame work of 50x50x5mm thick angle iron base frame, minimum 60 cm hight and fixed with PCC 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) in foundation for fixing panels, powder coated finish over one coat of red oxide primer outside and two coats of red oxide primer on inside and PCC 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) in foundation for fixing panels & aluminium busbar chanel insulated with colour coated heat shrinkable sleaves and mounted on DMC/Epoxy insulator all as specified & directed. 5 Each Job
45 45 M&L for steel tubing galvanised, light grade complete with fittings laid in trenches/ fixed along with poles/walls & floor of buildings etc as protection to cables including demolition & taking down of the old existing and repair of the floor/wall with matching with the existing if required of size 80 mm dia bore complete all as specified and as directed. 30 RM
46 46 Description all as per item no 45 of above but of size 50 mm dia bore complete all as specified and as directed. 30 RM
47 47 Description all as per item no 45 of above but of size 40 mm dia bore and ditto. 30 RM
48 48 M & L for road cutting incl necessary excavation 45 cm wide and 90 cm in depth as in trenches in any type of soils/rock for laying HT/LT UG cable through pipe after laying /through the cable trenches will be filling top with M&L PCC 1:3:6 type C-1 using 20 mm grdaeds stone aggregates from top over 15 cm thick hard good of broken boulders , 63 mm gauge over 15 cm bolders 100 mm dia over filled and rammed earth to make good the disburbed surface etc complete all as specified and directed. 30 RM
49 49 M&L for laying 40 mm graded stone aggregate in substations/main switching yard insuch a way that after removing of unwanted grass from substations and then levelling at zero level and laying of stone dust of 50 mm thick at an initial layer and then laying of 40 mm gaded stone aggregate 100 mm thick over the stone dust. . The complete work shall be as decided and directed by engr in charge. 250 Sqm
50 50 M&L for 100 mm thick PCC 1:2:4 type B-1 (using 20mm graded stone aggregates) as in pavement/hardstanding /floors of installation/ sub stn area as in mass concrete including cleaning and levelling of existing surfcaes etc complete all as specified and directed . 100 Sqm
51 51 S & F and replacement of cross arms, bracing, supports clamps and back plates fabricated from structural steel sections incl nuts & bolts, washers, welding bending cold or hot, drilling holes for bolts in any shape or size and inclusive of one red oxide primer coat, one under coat and one finishing coat of synthetic enamel paint complete all as specified and directed 4 Qtl
52 52 Disconnection of faulty LT 1.1 KV cable of any size from both ends, testing of cables with LT megger or highvoltage DC testing mechine and locating the fault in the cable by fault locating Machine (FLC) to pin point at the exact position of fault including the cost for transporting machine at various locations with T&P, manpower and standby power supply for testing of cable all as specified ( Cost also incudes for providing fault locating machine at ite as per requirement). Note :- The contractor will be initated on phone followed in writing for faults in LT UG cables. Contractor has to attend site and arrange to bring FLC machine on site within 48 hrs to locate the fault. If the contractor failing to bring the FLC machine for location of fault a penalty of Rs 5000- per cable per day will be charged from his dues. 8 Complete Job
53 53 S&F in replacement of cable jointing Kit 1.1 KV (earthed) grade cable straight through heat shrink type joint complete with jointing material and accessories suitable for 3.5/4 core XLPE armoured Aluminium conductor cable of size 50 - 120 sqmm complete all as specified and as directed.Make :- 3M/Denson/Raychem/M seal 8 Each Set
54 54 Description all as per item no 53 here in above but of size 150 Sqmm 3.5 Core and ditto. 3 Each Set
55 55 Description all as per item no 53 here in above but of size 185 Sqmm 3.5 Core and ditto. 3 Each Set
56 56 Description all as per item no 53 here in above but of size 240 Sqmm 3.5 Core and ditto. 2 Each Set
57 57 Description all as per item no 53 here in above but of size 300 Sqmm 3.5 Core and ditto. 2 Each Set
58 58 Description all as per item no 53 here in above but of size 400 Sqmm 3.5 Core and ditto. 2 Each Set
59 59 S&F in replacement of 1100 Volts grade heavy duty cable PVC insulated multi stranded copper conductor served with inner sheathing of PVC tape & overall PVC sheathed in service of 3 core 2.5 Sqmm for replacing connecting cable of security lights through connectors and copper lugs and the copper cables run through ISI marked PVC pipe of 20 mm dia secured with clamps & nut bolts .(Make :- Havells, Plaza cables or equivalent.) 300 RM
60 60 Supply & fixing of single phase automatic street light switch using integrated sensor based NATURE SWITCH for automatic switching of street lights based on LUX level of natural light required illuminance for switching on is ‹ 30 Lux and for switching OFF › 10 Lux level. The sensor (nature switch) along with suitable power contactors input (supply) MCB and output (load) MCB(s), support terminals should be enclosed in pole/ wall mountable enclosure made of rust proof, electric shock proof , termite proof and FR graded SMC junction box conforming of IP 54 degree of ingress single phase 8KW lightning load capacity including mounting bracket , cable glands, front openable doors fitted with hinges & locking arrangment complete all as specified and directed. The contactor MCB and circuit wiring should suitable enough to take load of 8 KW equally distributed over three phase and street light timer should be comprising of following:- (a). Input MCB rating 63 Amps (b).Contactor MCB rating 63 Amps (c).Out put MCB rating 63 Amps (d).Three phase circuit wiring minimum 16 Sqmm multistranded copper wire. (e)Model No :- SWADEEP -02EC 8 KW1P. Make :- Kakatiya Energy Systems Ltd 6 Each
61 61 Supply, erecting and fixing in true vertical position, steel tubular swaged pole (410 SP-31) 9.0 mtr long, complete with cast iron base plate, pole cap / finial taper plug, bolts, nuts and washers, welded reduced section and longitudinal weld throughout entire length of pole including 2 coats of black bituminous paint externally upto planting depth and remaining exterior portion of pole shall be provided with two coats of aluminium paint over one coat of red oxide primer and incl taking down existing old unserviceable poles complete all as specified and directed. (Numbering of the poles shall be done with synthetic enameled painted letter of shape & size as directed.) Note :- Excavation incl earth work and PCC foundation will be measured and paid separately. (a) PS Steel Tubes Pvt Ltd (b) India Electrical Poles.(c) United Engineers Kanpur(d) National tubing Co. Kanpur\n(e) BCW Kanpur\n 10 Each
62 62 S&F of cable jointing Kit 11 KV (earthed) grade cable for outdoor termination heat shrink type joint complete with jointing material and accessories suitable for 3 core XLPE armoured Aluminium conductor cable of size 95 sqmm complete all as specified and as directed. 4 Each Set
63 63 S&F of cable jointing Kit 11 KV (earthed) grade cable for outdoor termination heat shrink type joint complete with jointing material and accessories suitable for 3 core XLPE armoured Aluminium conductor cable of size 120 sqmm complete all as specified and as directed. 4 Each Set
64 64 Excavation in trenches n. exc 1.5 mtr wide and n. exc 1.5 mtr depth for pole / cable / foundation etc including getting out in soft /loose soil complete all as specified and directed. 525 CUM
65 65 Excavation in trenches in any type of soil not exc 1.5 mtrs wide and exc 1.5 mtr in depth for laying of pipe/ cables/ poles/foundation etc and getting out complete all as specified and as directed. 15 Cum
66 66 Returning, filling in, approved earth including spreading, levelling, watering and well ramming in layers n.exc 25 Cm thick after cable are laid and tested complete all as specified and directed. 290 CUM
67 67 Removing excavated material / surplus soil to a distance not exc. 50 mtrs & deposited where directed at a level not exc.1.5 mtr above the ground level complete all as specified & directed. 250 CUM
68 68 M&L for fine and clean sand (river sand) free from sharp materials in trenches for cushioning of cable 8 cm thick under cable and 15 cm thick over the cable including gently punning complete all as specified and directed by Engr–in– Charge. Note:- The total thickness of sand shall be measured 18 cm after punning. 120 Cum
69 69 Supplying and laying Precast concrete cable cover class LV type -I flat size 250x150x40 mm laid parpendicular to the axis of cable in trenches etc complete as directed. Make: Make: M/S MEHATAB TILES, Rani Shopping Centre, Bhanwar, Indore,(B) M/S NAVYA TILES, 68, NEHRU PARK, SARDARPUR,JODHPUR- 342003 Ph. 0291-2650094, 2627963(C) SAP PAVERS JODHPUR (D) SAGAR TILES SAHARANPUR (E) Star Tiles & Industries, Rama Devi, Kanpur 7500 Each
70 70 M&L for PCC cable cover class HV type 1 flat size 300 mm x 180 mm x 40 mm, ISI marked across the cable for protection of cable after sand cushioning complete all as specified & directed. Make: Make: M/S MEHATAB TILES, Rani Shopping Centre, Bhanwar, Indore,(B) M/S NAVYA TILES, 68, NEHRU PARK, SARDARPUR,JODHPUR- 342003 Ph. 0291-2650094, 2627963(C) SAP PAVERS JODHPUR (D) SAGAR TILES SAHARANPUR (E) Star Tiles & Industries, Rama Devi, Kanpur . 1200 Each
71 71 Supply,laying and testing in repair/replacement of cable XLPE insulated,screened,PVC bedded galvanized steel strip or wire armoured electric power cable (heavy duty) 1100 V grade with multi stranded aluminium conductor of size 630 sqmm single core as per IS 7092 Pt-I complete all as specified and as directed. Make :- M/s KEI INDUSTRIES/HAVELLS INDIA LTD/PLAZA CABLES /Polycab 100 RM
72 72 M&L for PCC floor any description for laying UG cable/pipe line and making good the disturbed area to match with the existing surface with cement concrete 1:3:6 type C-1 using 20 mm graded stone aggregate including removing the excavated/demolished materialsn to a distance n exc 50 mtr and deposting where directed etc complete all as specified. 40 Sqm
73 73 M&L for PCC 1:2:4 type B-1 (using 20mm graded stone aggregates) as in coping for poles including providing necessary work all as specified and directed . 3 Cum
74 74 M&L for PCC 1:4:8 type D-2 (using 40mm graded stone aggregates) as in foundation filling and mass concrete for poles all as specified and directed . 7 Cum
75 75 M&L for PCC 1:3:6 type C-2 (using 40mm graded stone aggregates) as in foundation filling and mass concrete including form work for poles/ mass concrete at substations all as specified . 20 Cum
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail