}

Repair And Cleaning Of Sewage Line , Septic Tanks , Area Drainage , Foothpath , Fencing Etc At Vairengte Under Ge Silchar, VAIRENGTE-Mizoram

Military Engineer Services-MES has published Repair And Cleaning Of Sewage Line , Septic Tanks , Area Drainage , Foothpath , Fencing Etc At Vairengte Under Ge Silchar. Submission Date for this Tender is 27-11-2020. Footpath Work Tenders in VAIRENGTE Mizoram. Bidders can get complete Tender details and download the document.




Tender Notice

25842482
Corrigendum : Repair And Cleaning Of Sewage Line , Septic Tanks , Area Drainage , Foothpath , Fencing Etc At Vairengte Under Ge Silchar
Open Tender
Indian
Mizoram
VAIRENGTE
27-11-2020

Tender Details

Repair And Cleaning Of Sewage Line , Septic Tanks , Area Drainage , Foothpath , Fencing Etc At Vairengte Under Ge Silchar

Corrigendum Details

Sr No CorrigendumDate Corrignedum CorrigendumType NewSubmissionDate
1 20-Nov-2020 Bid Auto Extn Corrigendum Bid Auto Extn Corrigendum 27-11-2020

Key Value

Document Fees
INR 500 /-
EMD
INR 20000.0 /-
Tender Value
Refer document

BOQ Items

REPAIR AND CLEANING OF SEWAGE LINE, SEPTIC TANKS, AREA DRAINAGE, FOOTHPATH, FENCING ETC AT VAIRENGTE UNDER GE SILCHAR
Sl. No. Item Description Item Code / Make Quantity Units
1 1 Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified & directed 40 Sqm
2 2 Material and labour for precast cement concrete 1:2:4 type B1 using 20 mm graded crushed stone aggregates as in cover slab and set in cement morter 1:6 incl necessary formwork complete all as specified & directed 0.8 Cum
3 3 Cleaning/desludging completely of solid/ liquid sludge by pumping mechanically from inside of soakage well, blocked man holes etc. including removal and disposal of sludge within defence area including supply and spreading of bleaching powder sorrounding of soakage well , man holes etc complete all as specified & directed \nNOTE- Sludge shall be burried in earth pit adequate size (made by the Contractor at his own cost) within defence land as directed by Engr-in-Charge. The pit shall be covered with excavated soil bleaching powder shall be spreaded on pit & sorrounding area (as directed) to avoid to any health hazard or spreading of foul gas. The Contractor quoted rate shall be included for the same & nothing extra shall be admissible to Contractor on his account. 200 Cum
4 4 Cleaning/desludging of septic tank for all liquid sludge by pumping mechanically from inside of sseptic tank including removal and disposal of sludge within defence area including supply and spreading of bleaching powder sorrounding of septic tank complete all as specified & directed \nNOTE- Sludge shall be burried in earth pit adequate size (made by the Contractor at his own cost) within defence land as directed by Engr-in-Charge. The pit shall be covered with excavated soil bleaching powder shall be spreaded on pit & sorrounding area (as directed) to avoid to any health hazard or spreading of foul gas. The Contractor quoted rate shall be included for the same & nothing extra shall be admissible to Contractor on his account.
5 4.01 For Capacity of 10 users 7 EACH
6 4.02 For Capacity of 25 users 8 EACH
7 4.03 For Capacity of 50 users 8 EACH
8 5 Cleaning of choked WC and inspection chamber by using rubber pump and rod including removal of sludge and other foreign materials complete all as specified & directed 50 EACH
9 6 Cleaning of floor trap of bath, wash basin, urinals etc. by using rubber pump and rod including removal of sludge and other foreign materials complete all as specified & directed 20 EACH
10 7 Cleaning of sewage lines,110 mm to 200 mm bore, any type of drain complete all as specified & directeds by rodding with flexible sewer rod , cleaning throughly from inspection chamber to manholes of any depth,including removal of sludge and other foreign materials and making the sewer line functional complete all as specified & directed 200 RM
11 8 Demolition of cement concrete (un-reinforced) in ground floors and paving not exceeding 15 cm thick above or below ground level complete all as specified & directed 10.88 Cum
12 9 Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided complete all as specified & directed 3 Cum
13 10 Demolition of cement concrete (reinforced) of any description and in any position not otherwise specifically provided reinforcement cut to facilitate demolition complete all as specified & directed 3 Cum
14 11 Demolition of brick work/stone masonry, built in cement mortar including all quoins, arches, pillars etc but excluding ashlars facings, dressed stone work and precast concrete articles in foul position complete all as specified & directed\n\n 3 Cum
15 12 Demolition of brick work/stone masonry, built in cement mortar including all quoins, arches, pillars etc but excluding ashlars facings, dressed stone work and precast concrete articles complete all as specified & directed\n\n 8.6 Cum
16 13 Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified & directed\n 175 Sqm
17 14 Dismantling of 75 mm bore cast iron or reinforced concrete drain complete all as specified & directeds, jointed in cement mortar and taking out of trenches, if required complete all as specified & directed 15 RM
18 15 Supply and fix Road Stud DA-52 made of ABS material with two reflectors fitted in the body. It should bear load load upto 25 tons & two way reflective 100x120x20 mm in size complete all as specified & directed 20 EACH
19 16 Material and labour for PCC 1:4:8 type D2 using 40 mm graded crushed stone aggregates as in foundations, filling and mass concrete complete all as specified & directed 0.18 Cum
20 17 Material and labour for 75 mm thick PCC 1:3:6 type C-2 using 40 mm graded crushed stone aggregates as in floor finished even & smooth without using extra cement complete all as specified & directed 30 Sqm
21 18 Material and labour for 100 mm thick PCC 1:2:4 type B1 using 20 mm graded crushed stone aggregates as in paving/hard standing complete all as specified & directed 50 Sqm
22 19 Material and labour for forming construction joint 30 mm deep x 10 mm wide filled with Grade B sealing compound complete all as specified & directed 10 10RM
23 20 Material and labour for PCC 1:3:6 type C2, using 40 mm graded crushed stone aggregates as in foundation and mass concrete complete all as specified & directed 12 Cum
24 21 Material and labour for PCC 1:2:4 type B1, using 20 mm graded crushed stone aggregates as in foundation and mass concrete complete all as specified & directed 1 Cum
25 22 Separating, scraping and cleaning of reinforcement (Demolition of concrete measured separately) complete all as specified & directed 1.5 Qtl
26 23 Material and labour for PCC 1:3:6 type C2 using 40 mm graded crushed stone aggregates as in surface channel and drain complete all as specified & directed 3 Cum
27 24 Material and labour for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc. complete all as specified & directed 50 RM
28 25 Material and labour for brickwork with subclass 'B' old size bricks, straight or curved on plan exceeding 6 m mean radius, built in cement mortar 1:4 complete all as specified & directed 3 Cum
29 26 Material and labour for brickwork with subclass 'B' old size bricks, straight or curved on plan exceeding 6 m mean radius, built in cement mortar 1:6 complete all as specified & directed 4 Cum
30 27 Material and labour for half brick work with sub class 'B' bricks straight or curved on plan to radius built in cement mortar 1:4 complete all as specified & directed. 40 Sqm
31 28 Material and labour for Mild steel TMT bars 6 mm to 8 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90 mm dia or securing with clips complete all as specified & directed 50 Kg
32 29 Material and labour for Mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90 mm dia or securing with clips complete all as specified & directed 190 Kg
33 30 Material and labour for Loose filling with broken bricks of gauge 80 to 150 mm in soakage pits, soakage wells complete all as specified & directed. 3 Cum
34 31 Supply and fix Non Skid ceramic tiles color 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 but not exceeding 0.18 sqm, as in floors etc. set and jointed in neat cement slurry and pointed in white or colored cement to match over & including 15 mm thick screed bed or bedding layers in cement mortar 1:6 complete complete all as specified & directed 60 Sqm
35 32 Material and labour for 7 mm thick glazed ceramic colour tiles of size 300 mm x 200 mm as in skirting / dado set and jointed and pointed in white or colour cement to match existing surfaces including 10 mm thick rendering in cement mortar 1:4 complete all as specified & directed 50 Sqm
36 33 Material and labour for 15 mm thick rendering in cement mortar 1:3 on fair faces of brick or concrete surfaces ,finished the surface even and smooth with using extra cement and integral water proofing compound complete all as specified & directed \nNotes:- Integral Water Proofing Compound shall be measured and paid separately. 40 Sqm
37 34 M&L for Rendering 15mm thick in two layers [base layer 10mm IN CM 1:4 & finishing layer 5mm thick in cement mortar (1:4)] using liquid water proofing compound in IInd layer only on brick work or concrete surfaces of wall, surfaces finished even and smooth using extra cementcomplete all as specified & directed.\nNote : WPC shall be measured and paid separately. 40 Sqm
38 35 Supply only integral water proofing compound complete all as specified & directed 22.5 Kg
39 36 Material and labour for 10 mm thick rendering in cement mortar 1:6 on fair faces of brick or concrete surfaces ,finished the surface even and fair without using extra cement complete all as specified & directed 60 Sqm
40 37 Supply and fix Bands, straps, supports or stays for rainwater, ventilating complete all as specified & directeds, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified & directed 62 Kg
41 38 Material and labour for new or previously untreated steel surfaces and applying two coats of synthetic enamel paint over a coat of red oxide primer of any description not otherwise described over 10 cm width or girth complete all as specified & directed 17 Sqm
42 39 Material and labour for old steel surfaces and applying one coat of synthetic enamel paint of any description not otherwise described over 10 cm width or girth complete all as specified & directed 8 Sqm
43 40 Material and labour for sand filling under floors or in foundations including watering and consolidation complete all as specified & directed 0.88 Cum
44 41 Material and labour for rubber moulded reflective type Chequered cement concrete tiles 300x300x25 mm etc. set and jointed and pointed in neat cement slurry in floor with white cement and pigment over & including 15 mm thick screed bed or bedding layers in cement mortar 1:6 complete complete all as specified & directed 30 Sqm
45 42 Material and labour for 60 mm thick Machine pressed concrete interlocking paver block of any shape and size conforming to IS 1565-2006 and grade of concrete should be M-35 with grey cement and no pigment complete all as specified & directed 35 Sqm
46 43 Material and labour for use and waste of formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200 mm thick (Horizontal or sloping) for rough finished flat surfaces of concrete complete all as specified & directed 14 Sqm
47 44 Material and labour for formwork to edges of fair faces concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs not exceeding 20 cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exceeding 10 cm but not exceeding 20 cm wide complete all as specified & directed 40 RM
48 45 Material and labour for RCC 1:1.5:3, type A-1 using 20mm graded crushed stone aggregates as in slabs supported on walls, beams and columns in floor, roof, landing, balckonies,slab and in shelves and like complete all as specified & directed \nNote:- Reinforcement and form work shall be measured and paid on separate Items 2.2 Cum
49 46 Material and labour for 110 mm bore concrete bed to drain complete all as specified & directeds with PCC 1:3:6 type C2 using 40 mm graded crushed stone aggregates including packing under, and haunching against the sides of complete all as specified & directeds after they are laid and tested; in complete all as specified & directed 10 RM
50 47 Material and labour for 150 mm bore concrete bed to drain complete all as specified & directeds with PCC 1:3:6 type C2 using 40 mm graded crushed stone aggregates including packing under, and haunching against the sides of complete all as specified & directeds after they are laid and tested; in complete all as specified & directed 5 RM
51 48 Excavating in post holes each not exceeding 0.5 cum, getting out, in soft /loose soil, ramming earth filling or borken rubble mixed with earth around in layers not exceeding 25 cm watering and removing surfaces soil to distance not exceeding 50 m and making good surfaces all as specified and directed. 66 Each
52 49 Dismantling posts or struts embedded in Concrete, brick work, masonry etc.(wood, steel or RCC) any section, including taking out embedded portion and making good disturbed ground complete all as specified & directed 66 RM
53 50 Supply and fix galvanised. 2 strand, steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75 mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc fixed in repairs complete all as specified. Notes: Each line wire to be measured 3 100RM
54 51 Restraing and resecuring including making good staple etc Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails strain- ing bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. complete all as specified. Notes:Each line wire to be measured 2 100RM
55 52 Supply and fix mild steel work as in posts and struts in fencing including cutting tops to shape as directed. drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified & directed 450 Kg
56 53 Fixing only as in repairs chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire complete all as specified & directed Note: Standard rail and straning bolts shall be measured and paid separately. 80 Sqm
57 54 Supply only Chain link MS galvanisd fencing, any size or type complete all as specified & directed 152 Kg
58 55 Supply only mild steel round bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips as in line wire of chain link fencing complete all as specified & directed 79 Kg
59 56 Supply and fix Mild steel screw bolts. purpose made. with hexagonal or square head one end and screwed the other, or screwed both ends; each screwed end to be fitted with washers and one hexagonal or square nut not exc 5 cm long and dia of neck not exceeding 11-15 mm complete all as specified & directed 10 Kg
60 57 Demolition and breaking up 150 mm dia drain complete all as specified & directeds (Salt glazed ware, AC or Reinforced concrete) set in cement mortar complete all as specified & directed 20 RM
61 58 Demolition and breaking up 150 mm dia drain complete all as specified & directeds (Salt glazed ware, AC or Reinforced concrete) set in cement mortar complete all as specified & directed 50 RM
62 59 Supply and fix 150 mm bore PVC (SWR) complete all as specified & directeds single socketed in any length with rubber ring joints fixed to laid in trenches / under floor complete all as specified & directed 20 RM
63 60 Supply and fix 110 mm bore PVC (SWR) complete all as specified & directeds single socketed in any length with rubber ring joints fixed to laid in trenches / under floor complete all as specified & directed 50 RM
64 61 Supply and fix 75 mm bore PVC (SWR) complete all as specified & directeds single socketed in any length with rubber ring joints fixed to laid in trenches / under floor complete all as specified & directed 15 RM
65 62 Taking up or down water tubing 15 mm bore from trenches/wall, ceiling or floors including all fittings, segregated and stacking the complete all as specified & directed complete all as specified & directed 40 RM
66 63 Taking up or down water tubing 20 mm bore from trenches/wall, ceiling or floors including all fittings, segregated and stacking the complete all as specified & directed complete all as specified & directed 30 RM
67 64 Refixing 15 mm bore old steel tubing obtained from taking down and connections in new or old position with new GI fittings (Walls, ceiling, floors, etc.) complete all as specified & directed 10 RM
68 65 Refixing 20 mm bore old steel tubing obtained from taking down and connections in new or old position with new GI fittings (Walls, ceiling, floors, etc.) complete all as specified & directed 5 RM
69 66 Supply, lay and fix 15 mm bore galvanized iron water tubing medium grade including all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified & directed 30 RM
70 67 Supply, lay and fix 20 mm bore galvanized iron water tubing medium grade including all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified & directed 25 RM
71 68 Supply and fix as in repair 15 mm bore pillar tap fancy type, cast copper alloy, with capstan head, chromium plated, screwed down high pressure, with or without letter Hot or Cold with long screwed shanuls and fly nuts, screwed for iron pipe complete all as specified & directed 10 EACH
72 69 Supply and fix as in repairs 15 mm bore Stop valves, fancy type, chromium plated, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for 15 mm bore iron complete all as specified & directed or for unions and fixed complete all as specified & directed\n 10 EACH
73 70 Supply and fix, as in repair for vitreous china wash down water closet pan of padestel pattern white with P or S trap including Plastic water closet seat cover , white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device jointed in white cement complete all as specified & directed\n 2 Each
74 71 Supply and fix, as in repair for vitreous china wash down water closet pan of padestel pattern white with P or S trap including Plastic water closet seat cover , white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device jointed in white cement complete all as specified & directed \nMake JAQUAR Cat part No LYS-WHT-38201 Cistern with cistern fittings for 38751P180UFSM & 38751S250UFSM set or equivalent make as approved by GE.\n 1 Each
75 72 Supply and fix as in repairs 15 mm bore Bib taps, chromium plated, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron complete all as specified & directed or for brass ferrule and fixed complete all as specified & directed\nMake Parryware Cat No G0304A1/ Jaquar Cat No FUS-29037/ Marc Cat No MCT-1030 or equivalent as approved by GE.\n \n 16 Each
76 73 Supply and fix as in repair 10 ltrs capacity PVC valveless syphonic action type, low level flushing cistern, white with inlet, ball valve float and handle including brackets and 32 mm bore PVC low or high density flush complete all as specified & directed complete all as specified & directed\nMake Parryware Cat No E8109 / Cera Cat No B1020101/ Prayag Cat No 502 or equivalent as approved by GE. 6 Each
77 74 Supply and fix 110 mm bore PVC (SWR) junction single, (Single T) equal or unequal complete all as specified & directed 3 Each
78 75 Supply and fix 110 mm bore PVC (SWR) bends of any radius complete all as specified & directed 5 Each
79 76 Supply and fix 75 mm bore PVC (SWR) bends of any radius complete all as specified & directed 5 Each
80 77 Supply and fix 75mm bore PVC(SWR) vent cowl complete all as specified & directed 4 Each
81 78 Supply and fix 110 mm /110 mm bore PVC (SWR) 'P' trap complete all as specified & directed 1 Each
82 79 Supply and fix PVC connections 15 mm size with PTMT nuts of length 450 mm complete all as specified. 10 Each
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail