}

Design , Construction , Installation , Testing And Commissioning Of 500 Kld Common Effluent Treatment Plant Along With 5 Year Operation And Maintenance At Iid Center Udhampur Site Ii , District Udhampur Jammu And Kashmir, Udhampur-Jammu And Kashmir

Jammu And Kashmir Small Scale Industries Development Corporation Limited has published Design , Construction , Installation , Testing And Commissioning Of 500 Kld Common Effluent Treatment Plant Along With 5 Year Operation And Maintenance At Iid Center Udhampur Site Ii , District Udhampur Jammu And Kashmir. Submission Date for this Tender is 17-11-2020. Effluent Treatment Plant Tenders in Udhampur Jammu And Kashmir. Bidders can get complete Tender details and download the document.




Tender Notice

25840294
Design , Construction , Installation , Testing And Commissioning Of 500 Kld Common Effluent Treatment Plant Along With 5 Year Operation And Maintenance At Iid Center Udhampur Site Ii , District Udhampur Jammu And Kashmir
Open Tender
Indian
Jammu And Kashmir
Udhampur
17-11-2020

Tender Details

Design , Construction , Installation , Testing And Commissioning Of 500 Kld Common Effluent Treatment Plant Along With 5 Year Operation And Maintenance At Iid Center Udhampur Site Ii , District Udhampur Jammu And Kashmir

Key Value

Document Fees
INR 6000 /-
EMD
INR 840000.0 /-
Tender Value
INR 4.19 Crore /-

BOQ Items

Name of Work: Design,construction,installation testing and comissioning of 500 KLD CETP plant along with 5 years operation & maintenance at IID Center Udhampur(Site II) ,district Udhampur,Jammu & Kashmir
Sl. No. Item Description Item Code / Make Quantity Units
1 1 EFFLUENT TREATMENT PLANT 500 KLD BI01010001010000000000000515BI0100001112
2 1.01 All ETP system completes in all respect and including all Civil & construction works.
3 1.02 Design, supplying, installing, testing & commissioning of EFFLUENT Treatment Plant
4 1.03 Nature of Waste - Industrial Effluent
5 1.04 Daily average flow - 500 cum/day
6 1.05 Effluent treatment plant shall include the following items:
7 1.06 Bar Screen Chamber
8 1.07 Oil & Grease chamber
9 1.08 Effluent equalization tank
10 1.09 Flocculation Tank
11 1.1 Primary settling tank
12 1.11 FAB Tanks
13 1.12 Tube Settler
14 1.13 Clear water Tank
15 1.14 Sludge Holding Tank
16 1.15 Filtration through DMF & ACF
17 1.16 Air Blowers, Pumps & equipment
18 1.17 Piping, valves etc
19 1.18 Electrical Panel & Cabling
20 1.19 Sludge Dryer /Centrifuge
21 1.2 Instrumentation like Metering devices, Sensors etc
22 1.21 Mixed oxidant generation system for disinfection.
23 2 Supply, installation, testing & commissioning of 1 Nos. Stainless Steel mechanical Bar Screen havin size 6 mm opening with suitable lifting arrangement. 1 Set
24 2.01 Make-Shyasheelrit Engineering/Micro water/I2m corporation/Aerochem Enviro/Jash/Treveni
25 3 Supply, installation, testing & commissioning of level indicators and controllers for automatic operation of the complete system with high/low level alarm complete with auxillary NO/NC contacts. (Required in equalization tank, chlorine contact tank, sludge holding tank).Make-Pune techtrol/Minilec 5 Set
26 4 Supply, installation, testing & commissioning of non clogging type centrifugal type pumps capable of solids handling upto 15 mm having CI casing & CI impeller complete with mechanical seal & all accessories, motor of required capacity. Delivery header with isolation valve, Pumps shall have following duty.
27 4.01 Equalization Transfer Pumps
28 4.02 ONE set - (1 Working + 1 Standby)
29 4.03 Flow rate (each) = 25.0 m3/hr
30 4.04 Head = 10.00 Mtr
31 4.05 Motor HP = As per manufacturer recommendation
32 4.06 Make-Kirloskar/CRI/KSB/Willo 1 Set
33 5 Supply, installation, testing & commissioning of non clogging type Sludge transfer pumps CI material complete with mechanical seal & all accessories, motor of required capacity.Suction header with Isolation Butterly valves, Delivery header with isolation Butterly valve,NRV's. Pumps shall have following duty.
34 5.01 Sludge Transfer pumps
35 5.02 ONE set - (1 Working + 1 Standby)
36 5.03 Flow Rate (each) = 15.0 m3 / hr
37 5.04 Head = 10 - 12 Mtr
38 5.05 Motor HP = As per manufacturer recommendation
39 5.06 Make-Kirloskar/CRI/KSB/Willo 2 Set
40 6 AIR DIFFUSION SYSTEM
41 6.01 Air diffusion system shall include the following:
42 6.02 Capable of delivering 500.0 cum/hr of free air at 0.5 kg/cm2 driven through “V” belt or directly coupled through flexible coupling to a TEFCmotor of suitable HP Suitable for 415 ± 10% volts, 3 phase, 50 cycles A/C supply.
43 6.03 Twin type rotary air blowers.
44 6.04 ONE sets - ( 1 Working + 1 Standby)
45 6.05 Mke:- Everest/Airvac/IR/Akash/Beta 1 Set
46 7 Air piping shall comprise of pipes droppers / laterals with MS C Class (epoxy coated) Header complete with all fitting such as tees, crosses, plugs, sockets, Elbows, reducer,supporters & clamps, Puddle flange etc cutting chases and making good. 1 Lot
47 8 Non-clog type air dispersion system in the form of Air grid , Bottom faced holes at designed angles for FAB reactors / retreviable type diffusers & Top face for Equilisation Tank,Flocculation chamber,Sludge Holdng Tank, 1 Lot
48 9 Providing and fixing all interconnecting piping with all required isolation control valves for making the system complete functional as per site.
49 9.01 All piping submerged in EFFLUENT waste / pumping EFFLUENT waste shall be 10 -kg/cm2 HDPE or schedule 80 CPVC pipes. 1 Lot
50 9.02 Supply, installation, testing and commissioning of MBBR media to be installed in FAB Tank along with suitable sludge removal arrangement either by pumps or air lifting pumps. Make:-MM aqua/cooldeck/Micro water/Shyasheelrit engineering 1 Lot
51 9.03 Supply, installation, testing and commissioning of suitable PVC tube deck settling media to be installed in Primary &SecondaryTube Setller tank alongwith suitable sludge removal arrangement either by pumps or air lifting pumps. Make:-MM aqua/cooldeck/Micro water/Shyasheelrit engineering 1 Lot
52 10 Dosing Systems
53 10.01 Providing and fixing wall mounted Oxylite (Mixed Oxidant) Generation System, based on ECA Technology, producing non toxic mixed Oxidant Solution of 30LPH@ 500 ppm of Oxidant Concentration . The solution should be at a pH -7 (Neutral ) suitable for 24x7 operations .The system should have a single cell & wall mounted , supplied complete with appropriate dosing pumps , valves, piping, fittings, chemical dosing tank etc. Make:- Shyasheelrit Engineering/Progressive Engineering/I2m corporation/Aerochem enviro 1 Set
54 10.02 Supply, installation, testing & commissioning of Polyelectrolyte dosing system comprising of 100 ltrs HDPE tank with 0- 6 lph electronic metering type pump in flocculation chamber Make-Edose/Asia LMI 2 Set
55 10.03 Supply, installation, testing & commissioning of Alum dosing system comprising of 100 ltrs HDPE tank with 0-6 lph electronic metering type pump in flocculation chamber Make-Edose/Asia Lmi 2 Set
56 10.04 Supply, installation, testing & commissioning of Lime dosing system comprising of 200 ltrs HDPE tank with 0-6 lph electronic metering type pump in flocculation chamber.. Make-Edose/Asia Lmi 2 Set
57 11 Supply, installation, testing & commissioning factory assembled and tested vertical pumpset with CI body and CI impeller, shaft of Stainless Steel,CI suction and discharge and C.I. Base & head, mechanical seal, connected to a TEFC induction motor suitable for 400/440 volts, 3 phase 50 cycles A.C. supply with,isolation valve, non return valve of required sizes at discharge and suction of each pump, vibration eliminating pads as required, M.S channel fabricated common base plate bolted to cement concrete foundations complete.
58 11.01 Filter feed pumps:
59 11.02 Capacity : 25.0 Cum/hr.
60 11.03 Head : 30 Mtr
61 11.04 ONE set – ( 1 W + 1 S)
62 11.05 Motor HP = As per manufacturer recommendation
63 11.06 Make-Kirloskar/CRI/KSB/Willo 1 Set
64 11.07 Treated Water Transfer pumps.
65 11.08 Capacity : 25.0 m3/hr
66 11.09 Head: 30 mtrs.
67 11.1 ONE set - ( 1 Working + 1 Standby)
68 11.11 Motor HP = As per manufacturer recommendation
69 11.12 Make-Kirloskar/CRI/KSB/Willo 1 Set
70 12 Supply, installation, testing and commissioning of MSEP vessel filter with frontal piping and associated valves and accessories. Filter shall be suitable for minimum working pressure of 3.5 kg / cm2 and shall include media, standard fittings like pressure gauges, sampling cock, rinse drain, vacuum breaker etc
71 12.01 Multigrade filter
72 12.02 Flow rate : 25.0 Cum/hr
73 12.03 Make:-Shyasheelrit engineering //Micro water/Ion exchange/Thermax 1 Set
74 12.04 Activated Carbon Filter- Iodine value Graded Activated Carbon.
75 12.05 Flow Rate : 25.0 Cum/hr
76 12.06 Make:-Shyasheelrit engineering //Micro water/Ion exchange/Thermax 1 Set
77 13 Supply, installation, testing and commissioning Hydroulic sludge handling system capable for 500 KLD ETP, including filter press of Suitable Capacity with CI frame, PP plates complete with filter cloth complete with Filter press feed pump (Screw Type-1W+ 1 S) – with interconnecting piping .Make-I2m corporation/Shyasheelrit engineering /Micro water/Aerochem enviro 1 Set
78 14 Supply , Installation, Testing & Commissioning of Following metering devices:-
79 14.01 Outlet Treated water effluent Electromagnetic Flow meter cum Totaliser including all piping, isolation valves,cabling etc.Make:-Aster/Kranti 1 Set
80 14.02 Online pH meter at ETP outlet.Make:-Aster/Kranti 1 Set
81 14.03 Panel mounted Energy meter 1 Set
82 15 Supply ,installation testing and commissioning of online monitoring system for controlling the out flow and inflow water quality.Make:- Logic ladder / Xylem / Hack 1 Set
83 16 ELECTRICAL INSTALLATION FOR 500 KLD CETP
84 16.01 Design, fabrication, assembling, wiring, supply, installation, testing and commissioning of motor control centre fabricated out of 14 gauge CRCA sheet steel. Cable gland plates shall be provided on top as well as at the bottom of the panels. Panels shall be treated with all anticorrosive process before painting as per specifications with 2 coats of red oxide primer and final approved shade of powder coated paint. 2 Nos. earthing terminals shall be provided for 3 phase, 4 wire, 50 Hz supply system. Lifting hooks shall also be provided in case of large panels. Approval shall be taken for each panel before fabrication. Quoted rates shall be inclusive of cables (in accordance to specification) with earthing from panel to each motor / equipment.Make:-Micro water/Shyasheel rit engineering/Vidhyut/Advance/Aldec 1 Set
85 17 CIVIL UNITS FOR 500 KLD ETP
86 17.01 Screen Chamber (RCC 2 cum) 2 Nos
87 17.02 Oil & Grease Trap (RCC 2 cum) 1 Nos
88 17.03 Equalization Tank (RCC 170 cum) 1 Nos
89 17.04 Coagulation & Flocculation Tank (MSFRP 15 cum) 2 Nos
90 17.05 Primary settling Tank (MSFRP 50 cum) 1 Nos
91 17.06 FAB Tank (MSFRP 65 cum) 2 Nos
92 17.07 Secondary settling tank (MSFRP 60 cum) 1 Nos
93 17.08 Clear water tank (MSFRP 30 cum) 1 Nos
94 17.09 Treated water tank (RCC 170 cum) 1 Nos
95 17.1 Sludge Holding Tank (MSFRP 55 cum) 1 Nos
96 17.11 Other foundation (RCC) 1 Job
97 17.12 Lab Room with Lab Instrument 1 Job
98 18 Operation & Maintenance of plant for 5 Years with all consumables and wear & tears
99 18.01 Ist year Maintenance 1 Job
100 18.02 2nd yesr Maintenance 1 Job
101 18.03 3rd yesr Maintenance 1 Job
102 18.04 4th yesr Maintenance 1 Job
103 18.05 5th Year mintenance 1 Job
104 Total in Figures
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail