Uttar Pradesh Rajya Vidyut Utpadan Nigam Limited-UPRVUNL has published Special Maintenance And Repair Of Civil Works In Project Hospital And Vidyut Parishad Kanya Inter College Of New Colony , Harduaganj Thermal Power Plant , Kasimpur , Aligarh , Uttar Pradesh. Submission Date for this Tender is 04-12-2020. Building Repair Tenders in HARDUAGANJ THERMAL POWER STATION KASIMPUR ALIGARH Uttar Pradesh. Bidders can get complete Tender details and download the document.
Name of Work: Special M&R of civil works of poject hospital and Vidyut Parishad Kayna Inter College of new colony, Harduaganj Thermal Power Plant, Kasimpur, Aligarh, Uttar Pradesh | |||||
---|---|---|---|---|---|
Sl. No. | Item Description | Item Code / Make | Quantity | Units | |
1 | 1 | Disposal of malwa surplus earth and waste of construction material collected from desired place and disposal the same outside the colony upto 2K.M. | Item 01 | 10 | CUM |
2 | 2 | Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30cm in depth. 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth,lead upto 50m and lift upto 1.5m, disposed earth to be levelled and neatly dressed.All kinds of soil. | Item 02 | 5 | CUM |
3 | 3 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil. | Item 03 | 5 | CUM |
4 | 4 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. | Item 04 | 5 | CUM |
5 | 5 | Surface dressing of the ground including removing vegetation and\ninequalities not exceeding 15 cm deep and disposal of rubbish, lead upto 50 m and lift upto 1.5 m.All kinds of soil | Item 05 | 50 | 100SQM |
6 | 6 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) | Item 06 | 7 | CUM |
7 | 7 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) | Item 07 | 7 | CUM |
8 | 8 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level :1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) | Item 09 | 4 | CUM |
9 | 9 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, with 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size). | Item 10 | 2 | CUM |
10 | 10 | Centering and shuttering including strutting, propping etc. and removal of form for : Foundations, footings, bases of columns, etc. for mass concrete | Item 12 | 20 | SQM |
11 | 11 | Centering and shuttering including strutting, propping etc. and removal of form for : Suspended floors, roofs, landings, balconies and access platform | Item 13 | 40 | SQM |
12 | 12 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. Thermo-Mechanically Treated bars | Item 15 | 300 | Kg |
13 | 13 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:6 (1 cement : 6 coarse sand) | Item 16 | 7 | CUM |
14 | 14 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:6 (1 cement : 6 coarse sand) | Item 18 | 7 | CUM |
15 | 15 | Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills , facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Raj Nagar Plain white marble/ Udaipur green marble/ Zebra black marble Area of slab over 0.50 sqm . | Item 19 | 4 | SQM |
16 | 16 | Stone work (machine cut edges Veneer work) for wall lining upto 10 m height, backing filled with a grout of 12 mm thick cement mortar 1:3 (1 Cement : 3 coarse sand) and jointed with Cement mortar 1:2 (1 cement : 2 stone dust), including rubbing and polishing complete. (To be secured to the backing and the sides by means of cramps and pins which shall be paid for separately). Kota stone slabs exposed face dressed and rubbed. 25 mm thick | Item 20 | 4 | SQM |
17 | 17 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately).Sal wood | Item 21 | 0.1 | CUM |
18 | 18 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately).Kiln seasoned and chemically treated hollock wood | Item 22 | 0.2 | CUM |
19 | 19 | Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick : Kiln seasoned and chemically treated hollock wood | Item 23 | 5 | SQM |
20 | 20 | Providing and fixing glazed shutters for doors, windows and clerestory windows using 4 mm thick float glass panes, including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws.Kiln seasoned and chemically treated hollock wood 35 mm thick | Item 24 | 5 | SQM |
21 | 21 | Providing and fixing glazed shutters for doors, windows and clerestory windows using 4 mm thick float glass panes, including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws. Kiln seasoned and chemically treated hollock wood 30 mm thick | Item 25 | 5 | SQM |
22 | 22 | Providing and fixing flat pressed 3 layer particle board medium density exterior grade (Grade I) or graded wood particle board IS : 3087 marked,to frame, backing or studding with screws etc. complete (Frames, backing or studding to be paid separately): 12 mm thick | Item 26 | 10 | SQM |
23 | 23 | Providing and fixing ISI marked flush door shutters conforming to IS :2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters.35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws | Item 27 | 4 | SQM |
24 | 24 | Providing and fixing ISI marked flush door shutters conforming to IS :2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters.30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws | Item 28 | 4 | SQM |
25 | 25 | Providing and fixing ISI marked flush door shutters conforming to IS :2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. 25 mm thick (for cupboard) including ISI marked nickel plated bright finished M.S. Piano hinges IS : 3818 marked with necessary screws | Item 29 | 4 | SQM |
26 | 26 | Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws | Item 30 | 35 | SQM |
27 | 27 | Providing and fixing ISI marked flush door shutters conforming to IS :2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 plyveneering with vertical grains or cross bands and face veneers on both faces of shutters:30 mm thick including ISI marked Stainless Steel butt hingeswith necessary screws | Item 31 | 15 | SQM |
28 | 28 | Providing and fixing ISI marked flush door shutters conforming to IS :2202 (Part I) non-decorative type, core of block board construction withframe of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on bothfaces of shutters:25 mm thick (for cupboard) including ISI marked nickel platedbright finished M.S. piano hinges with necessary screws | Item 32 | 15 | SQM |
29 | 29 | Providing and fixing wooden moulded beading to door and window frames with iron screws, plugs and priming coat on unexposed surface etc. complete :kiln seasoned and chemically treated hollock wood 50x12 mm | Item 33 | 10 | M |
30 | 30 | Providing and fixing nickel plated M.S. pipe curtain rods with nickel plated brackets :20 mm dia (heavy type) metre | Item 35 | 10 | M |
31 | 31 | Providing and fixing fly proof galvanized M.S. wire gauge to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm all complete. With 12 mm mild steel U beading | Item 36 | 15 | SQM |
32 | 32 | Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embedding in cement concrete block 30x10x15cm 1:3:6 mix (1 cement : 3 coarse sand:6 graded stone aggregate 20mm nominal size). | Item 37 | 20 | EACH |
33 | 33 | Providing and fixing ISI marked oxidised M.S. pressed butt hinges with necessary screws etc. complete.125x65x2.12 mm | Item 38 | 10 | EACH |
34 | 34 | Providing and fixing ISI marked oxidised M.S. pressed butt hinges with necessary screws etc. complete.100x58x1.90 mm | Item 40 | 10 | EACH |
35 | 35 | Providing and fixing ISI marked oxidised M.S. pressed butt hinges with necessary screws etc. complete.75x47x1.70 mm | Item 41 | 10 | EACH |
36 | 36 | Providing and fixing ISI marked oxidised M.S. pressed butt hinges with necessary screws etc. complete.50x37x1.50 mm | Item 43 | 10 | EACH |
37 | 37 | Providing and fixing ISI marked oxidised M.S. sliding door bolts with nuts and screws etc. complete :300x16 mm | Item 44 | 10 | EACH |
38 | 38 | Providing and fixing ISI marked oxidised M.S. sliding door bolts with nuts and screws etc. complete : 250x16 mm | Item 45 | 10 | EACH |
39 | 39 | Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete :250x10 mm | Item 46 | 10 | EACH |
40 | 40 | Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete :200x10 mm | Item 47 | 10 | EACH |
41 | 41 | Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete :150x10 mm | Item 48 | 10 | EACH |
42 | 42 | Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete :100x10 mm | Item 49 | 10 | EACH |
43 | 43 | Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete :125 mm | Item 50 | 10 | EACH |
44 | 44 | Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete :100 mm | Item 51 | 10 | EACH |
45 | 45 | Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete :75 mm | Item 52 | 10 | EACH |
46 | 46 | Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete. | Item 53 | 5 | NOS |
47 | 47 | Providing and fixing aluminium tee channels (heavy duty) with rollers & stop end in pelmets as curtain rod | Item 54 | 10 | RM |
48 | 48 | 30 mm thick factory made Polyvinyl Chloride (PVC) door shutter made of styles and rails of a uPVC hollow section of size 60x30 mm and wall thickness 2 mm (± 0.2 mm), with inbuilt decorative moulding edging on one side. The styles and rails mitred and joint at the corners by means of M.S. galvanised/ plastic brackets of size 75x220 mm having wall thickness 1.0 mm and stainless steel screws. The styles of the shutter reinforced by inserting galvanised M.S. tube of size 25x20 mm and 1 mm (± 0.1 mm) wall thickness. The lock rail made up of 'H' section, a uPVC hollow section of size 100x30 mm and 2 mm (± 0.2 mm) wall thickness fixed to the shutter styles by means of plastic/ galvanised M.S. 'U' cleats. The shutter frame filled with a uPVC multi-chambered single panel of size not less than 620 mm, having over all thickness of 20 mm and 1 mm (± 0.1 mm) wall thickness . The panels filled vertically and tie bar at two places by inserting horizontally 6 mm galvanised M.S. rod and fastened with nuts and washers, complete as per manufacturer's specification and direction of Engineer-in-charge. | Item 55 | 5 | SQM |
49 | 49 | Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. | Item 56 | 300 | Kg |
50 | 50 | Welding by gas or electric plant including transportation of plant at site etc. complete. | Item 57 | 100 | cm |
51 | 51 | Dry brick on edge flooring in required pattern with bricks of class\ndesignation 7.5 on a bed of 12 mm mud mortar, including filling joints with Jamuna sand, with common burnt clay non modular bricks. | Item 58 | 15 | SQM |
52 | 52 | Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete. 40 mm thick with 20 mm nominal size stone aggregate | Item 59 | 1750 | M2 |
53 | 53 | Providing and fixing glass strips in joints of terrazo/ cement concrete floors.40 mm wide and 4 mm thick | Item 60 | 10 | M |
54 | 54 | Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) : 25 mm thick | Item 61 | 40 | SQM |
55 | 55 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. | Item 62 | 10 | SQM |
56 | 56 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey,Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), including pointing the joints with white cement and matching pigment etc, complete. | Item 63 | 10 | SQM |
57 | 57 | Providing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.0.63 mm thick with zinc coating not less than 275 gm/ m². | Item 64 | 10 | SQM |
58 | 58 | Providing high impact Polypropylene reinforced cement 6 mm thick corrugated sheets (as per IS: 14871) roofing up to any pitch and fixing with polymer coated J, or L hooks, bolts and nuts 8 mm dia. G.I. plain and bitumen washers or with self drilling fastener and EPDM washers etc. complete (excluding the cost of purlins, rafters and trusses), includingcutting sheets to size and shape wherever required. | Item 65 | 5 | SQM |
59 | 59 | Painting top of roofs with bitumen of approved quality @ 17kg per 10 sqm impregnated with a coat of coarse sand at 60 cudm per 10\nsqm, including cleaning the slab surface with brushes and finally\nwith a piece of cloth lightly soaked in kerosene oil complete :With residual type petroleum bitumen of grade VG -10 | Item 66 | 10 | SQM |
60 | 60 | Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2\ncoarse sand : 4 stone aggregate 10 mm and down gauge), including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design : In 75x75 mm deep chase | Item 67 | 5 | M |
61 | 61 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes.75 mm diameter | Item 68 | 10 | RM |
62 | 62 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes.110 mm diameter | Item 69 | 10 | RM |
63 | 63 | 12 mm cement plaster of mix :1:4 (1 cement: 4 coarse sand) | Item 70 | 75 | SQM |
64 | 64 | 12 mm cement plaster of mix :1:6 (1 cement: 6 coarse sand) | Item 72 | 300 | SQM |
65 | 65 | Neat cement punning. | Item 73 | 100 | SQM |
66 | 66 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two or more coats on new work. | Item 74 | 10 | SQM |
67 | 67 | White washing with lime to give an even shade : Old work (two or more coats) | Item 75 | 8 | SQM |
68 | 68 | White washing with lime to give an even shade :Old work (one or more coats) | Item 76 | 202 | SQM |
69 | 69 | Distempering with dry distemper of approved brand and manufacture (one or more coats) and of required shade on old work to give an even shade. | Item 77 | 8 | SQM |
70 | 70 | Wall painting with plastic emulsion paint of approved brand and\nmanufacture to give an even shade:One or more coats on old work | Item 78 | 10 | SQM |
71 | 71 | Painting with synthetic enamel paint of approved brand and\nmanufacture of required colour to give an even shade :One or more coats on old work | Item 79 | 15 | SQM |
72 | 72 | Re-lettering with black Japan paint of approved brand and manufacture. | Item 80 | 301 | PER LETTER PER CM HEIGHT |
73 | 73 | Finishing walls with water proofing cement paint of required shade : Old work (one or more coats applied @ 2.20 kg/10 sqm) over priming coat of primer applied @ 0.80 litrs/10 sqm\ncomplete including cost of Priming coat. | Item 81 | 14 | SQM |
74 | 74 | Finishing walls with water proofing cement paint of required shade : Old work (one or more coats @ 2.20 kg/10 sqm) complete. | Item 82 | 20 | SQM |
75 | 75 | Fixing chowkhats in existing opening including embedding chowkhats in floors or walls cutting masonry for holdfasts, embedding hold fasts in cement concrete blocks of size 15 x 10 x 10 cm with cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size), painting two coats of approved wood preservative to sides of chowkhats and making good the damages to walls and floors as required complete, including disposal of rubbish to the dumping ground within 50 meters lead : Door chowkhats | Item 83 | 10 | SQM |
76 | 76 | Fixing chowkhats in existing opening including embedding chowkhats in floors or walls cutting masonry for holdfasts, embedding hold fasts in cement concrete blocks of size 15 x 10 x 10 cm with cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size), painting two coats of approved wood preservative to sides of chowkhats and making good the damages to walls and floors as required complete, including disposal of rubbish to the dumping ground within 50 meters lead : windows chowkhats | Item 84 | 10 | EACH |
77 | 77 | Renewing glass panes, with putty and nails wherever necessary including racking out the old putty: Float glass panes of thickness 4 mm | Item 85 | 10 | SQM |
78 | 78 | Renewal of old putty of glass panes (length) | Item 86 | 10 | M |
79 | 79 | Refixing old glass panes with putty and nails | Item 87 | 10 | SQM |
80 | 80 | Raking out joints in lime or cement mortar and preparing the surface\nfor re-pointing or replastering, including disposal of rubbish to the\ndumping ground, all complete as per direction of Engineer-in-Charge. sqm 51.70 | Item 88 | 15 | SQM |
81 | 81 | Demolishing cement concrete manually/ by mechanical means\nincluding disposal of material within 50 metres lead as per direction of Engineer - in - charge.Nominal concrete 1:4:8 or leaner mix (i/c equivalent design mix) | Item 89 | 15 | CUM |
82 | 82 | Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within.50metres lead as per direction of Engineer - in- charge | Item 90 | 2 | CUM |
83 | 83 | Demolishing brick work manually/ by mechanical means including\nstacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge.In cement mortar | Item 91 | 2 | CUM |
84 | 84 | Taking out doors,windows and clerestory windows shutters(steel or wood) including stacking within 50 meters lead of area 3 sq meters and below | Item 92 | 5 | Each |
85 | 85 | Dismantling steel work in built up sections in angles ,tees,flats and channels including all gusset plates,bolts,nuts,cutting rivets,welding etc. including dismembering and stacking within 50 meters lead | Item 93 | 5 | Kg |
86 | 86 | Demolishing dry brick pitching in floors, drains etc. including stacking of serviceable material and disposal of unserviceable material within 50 metres lead : | Item 94 | 7 | CUM |
87 | 87 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50metres lead. | Item 95 | 4000 | SQM |
88 | 88 | Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. | Item 96 | 2 | CUM |
89 | 89 | Supplying at site :R.C.C. Standards post/ struts/rails/ pales of mix 1:1.5:3 (1 cement : 1.5 coarsesand : 3 graded stone aggregate 12.5 mm nominal size) with wooden plugs or 6mm bar nibs wherever required as per direction of Engineer-incharge (cost of earth works in excavation, concrete works\nin foundation to be paid separately). | Item 97 | 0.75 | CUM |
90 | 90 | Fencing with angle iron post placed at required distance embedded in cement concrete blocks, every 15th post, last but one end post and corner post shall be strutted on both sides and end post on one side only and provided with horizontal lines and two diagonals interwoven with horizontal wires, of barbed wire weighing 9.38 kg per 100 m (minimum), between the two posts fitted and fixed with G.I. staples, turn buckles etc. complete. (Cost of posts, struts, earth work and concrete work to be paid for separately). Payment to be made per mtr cost of total length of barbed wire used. With G.I. barbed wire metre\n | Item 98 | 1000 | RM |
91 | 91 | Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good\nthe walls wherever required : Kitchen sink without drain board 470x420 mm bowl depth 178 mm | Item 99 | 2 | EACH |
92 | 92 | Providing and fixing white vitreous china water closet squatting pan\n(Indian type) :Long pattern W.C. pan of size 580 mm | Item 100 | 2 | EACH |
93 | 93 | Providing and fixing white vitreous china water closet squatting pan (Indian type) :Orissa pattern W.C. pan of size 580x440 mm | Item 101 | 2 | Nos. |
94 | 94 | Providing and fixing white vitreous china pedestal type (European type/ wash down type) water closet pan. | Item 102 | 2 | Nos. |
95 | 95 | Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete. 10 litre capacity - White | Item 103 | 2 | Nos. |
96 | 96 | Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete. 10 litre capacity - coloured | Item 104 | 2 | EACH |
97 | 97 | Providing and fixing G.I. inlet connection for flush pipe connecting\nwith W.C. pan. Each | Item 105 | 2 | EACH |
98 | 98 | Providing and fixing white vitreous china wash basin including making all connections but excluding the cost of fittings :Flat back wash basin of size 450x300 mm | Item 106 | 5 | EACH |
99 | 99 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.32mm dia Semi rigid pipe | Item 107 | 2 | Nos. |
100 | 100 | Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing Rectangular shape 453x357 mm | Item 108 | 2 | Nos. |
101 | 101 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc.\nInternal work - Exposed on wall 15 mm dia nominal bore | Item 109 | 5 | M |
102 | 102 | Providing and fixing brass bib cock of approved quality :15 mm nominal bore | Item 110 | 5 | EACH |
103 | 103 | Providing and fixing brass stop cock of approved quality :15 mm nominal bore | Item 111 | 5 | EACH |
104 | 104 | Providing and laying four courses water proofing treatment with bitumen felt over roofs consisting of first and third courses of blown bitumen 85/25 or 90/15 conforming to IS : 702 applied hot @ 1.45 Kg per square metre of area for each course, second course of roofing felt type 3 grade-I (hessian based self finished bitumen felt) and fourth and final course of stone grit 6 mm and down size or pea sized gravel spread at 6 cubic decimeter per square metre, including preparation of surface but excluding grading complete with : 22.8.1 Bitumen felt (hessian base) type 3 grade I conforming to IS : 1322 | Item 112 | 8 | SQM |
105 | 105 | Dry brick (new) on flat flooring in required pattern with bricks of class designation 7.5 on a bed of 12 mm mud mortar, including filling joints with Jamuna sand, with common burnt clay non modular bricks. | Item 113 | 80 | SQM |
106 | 106 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. | Item 114 | 40 | SQM |
107 | 107 | Dry brick (old) on flat flooring in required pattern with bricks of class designation 7.5 on a bed of 12 mm mud mortar, including filling joints with Jamuna sand, with common burnt clay non modular bricks. | Item 115 | 350 | SQM |
108 | 108 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:6 (1 cement : 6 coarse sand) | Item 116 | 12 | CUM |
109 | 109 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:6 (1 cement : 6 coarse sand) | Item 117 | 8 | CUM |
110 | 110 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey,Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), including pointing the joints with white cement and matching pigment etc, complete. | Item 118 | 70 | SQM |
111 | 111 | Structural steel work in single section, fixed with or without connecting plate,including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. | Item 119 | 100 | KG |
112 | 112 | Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete.25 mm thick with 10 mm nominal size stone aggregate | Item 120 | 150 | SQM |
113 | 113 | OM NO. 1123/FM/MINIMUM WEDGE DATE-05/07/2019 Unskilled labour for misc. work at residential & non residential building in nw colony HTPS | Item 121 | 30 | NOS |
114 | 114 | providing and laying at site wire mesh (rabbit). | Item 122 | 1200 | SQM |
115 | 115 | Painting top of roofs with bitumen of approved uality @ 17kg per 10 sqm impregnated with a coat of coarse sand at 60 cudm per 10 sqm, including cleaning the slab surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil complete : With residual type petroleum bitumen of grade VG -10 | Item 123 | 100 | SQM |
116 | 116 | NSR based on vide OM NO.-1123/FM/MINIMUM WEDGE /DATE-05-07-2019 dis-connecting of water tank from existing place for roof treatment and after completing roof treatment at existing place re-connect of water tank to supply line to proper working at that place. | Item 124 | 25 | NOS |
117 | 117 | Providing and laying four courses water proofing treatment with bitumen felt over roofs consisting of first and third courses of blown bitumen 85/25 or 90/ 15 conforming to IS : 702 applied hot @ 1.45 Kg per square metre of area for each course, second course of roofing felt type 3 grade-I (hessian based self finished bitumen felt) and fourth and final course of stone grit 6 mm and down size or pea sized gravel spread at 6 cubic decimeter per square metre, including preparation of surface but excluding grading complete with : Bitumen felt (hessian base) type 3 grade I conforming to IS : 1322 | Item 125 | 10 | SQM |
118 | 118 | Painting top of roofs with bitumen of approved uality @ 17kg per 10 sqm impregnated with a coat of coarse sand at 60 cudm per 10 sqm, including cleaning the slab surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil complete : With residual type petroleum bitumen of grade VG -10 | Item 126 | 50 | SQM |
119 | 119 | Providing and laying four courses water proofing treatment with bitumen felt over roofs consisting of first and third courses of blown bitumen 85/25 or 90/ 15 conforming to IS : 702 applied hot @ 1.45 Kg per square metre of area for each course, second course of roofing felt type 3 grade-I (hessian based self finished bitumen felt) and fourth and final course of stone grit 6 mm and down size or pea sized gravel spread at 6 cubic decimeter per square metre, including preparation of surface but excluding grading complete with : Bitumen felt (hessian base) type 3 grade I conforming to IS : 1322 | Item 127 | 10 | SQM |
120 | 120 | Providing and fixing hard drawn steel wire fabric 75x25 mm mesh of weight not less than 7.75 Kg per sqm to window frames etc. including 62x19 mm beading of second class teak wood and priming coat with approved steel primer all complete. | Item 128 | 10 | SQM |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail