Military Engineer Services-MES has published 8877 Repairs To Roof , Joinery , Walls And Floors At Certain Bldgs Under Ge North Mumbai. Submission Date for this Tender is 17-11-2020. Civil Work Tenders in GARRISON ENGINEER NORTH MUMBAI Maharashtra. Bidders can get complete Tender details and download the document.
Name of Work: REPAIRS TO ROOF, JOINERY, WALLS AND FLOORS AT CERTAIN BLDGS UNDER GE NORTH MUMBAI (TENDER ID: 2020_MES_389574_1) | |||||
---|---|---|---|---|---|
Sl. No. | Item Description | Item Code / Make | Quantity | Units | |
1 | 1 | Taking down of chowkats or frames exceeding 1.5sqm but not exceeding 4 sqm with shutters (with out taking off shutters from the frames) complete all as specified and as directed by Engineer-in-Charge. | 30 | Each | |
2 | 2 | Taking down of chowkats or frames not exceeding 1.5sqm with shutters (with out taking off shutters from the frames) complete all as specified and as directed by Engineer-in-Charge. | 15 | Each | |
3 | 3 | Demolition cement concrete (unreinforced) in ground floors and pavings not exceeding 15 cm thickness (below or above ground level) etc complete all as specified and as directed by Engineer-in-Charge. | 105 | Cum | |
4 | 4 | Supply and fix 15 micron coloured aluminium sections for sliding or openable windows, ventilators, doors, partitions etc including fabrication of frame & shutters and fixing with necessary lugs, cleats, rollers, handles, locking arrangement etc including all accessories such as glazing clips and rubber beadings for fixing glass panes / wire mesh in frame complete all as specified and as directed by Engineer-in-Charge.\nMake : Hindalco/Indal (Indian Al Coy)/Jindal/Associated Profile & Aluminium Ltd/Ajit India\nNote:\n(i) Glass panes /wire mesh will be measured & paid separately. \n(ii) Rubber beading will not be weighed. \n | 420 | KG | |
5 | 5 | Supply and fix 15 micron coloured aluminium anodised grill of design No DG-117, 10 mm thick, cut to required size/shape, and fixed in position with and including aluminium beading and frame complete all as specified and as directed by Engineer-in-Charge. \nMake: DECOGRILLE of Associated group or equivalent make as approved by GE | 24 | Sqm | |
6 | 6 | Hacking out old broken glass (any thickness, size and description) from wooden/steel windows / ventilators frames, glazed with putty or fixed with beads on any storey of the bldg complete all as specified and as directed by Engineer-in-Charge | 50 | Sqm | |
7 | 7 | Supply and fix 5.50mm thick sheet glass, ordinary quality and glazing clip, in square exceeding 0.5 Sqm in each pane complete all as specified and as directed by Engineer-in-Charge. | 100 | Sqm | |
8 | 8 | Supply and fix stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples to aluminium windows and wooden door shutters etc complete all as specified and as directed by Engineer-in-charge. | 25 | Sqm | |
9 | 9 | Supply and fix in repairs stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples to aluminium windows and wooden door shutters etc complete all as specified and as directed by Engineer-in-charge. | 60 | Sqm | |
10 | 10 | Supply and fix 12 mm thick prelaminated particle board, exterior grade, prelaminated both sides with decorative choice lamination fixed with screws to aluminium frame work complete all as specified and as directed by Engineer-in-Charge. | 25 | Sqm | |
11 | 11 | Material and labour for machine cut mirror polished Kota stone slab flooring 20-25 mm thick over cement screed bed 15 mm thick in cement mortar 1:3set and jointed in neat cement slurry and pointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing including roughening surface of old concrete floor by picking, sweeping clean and washing with water to remove dust etc & brushing neat cement slurry at the rate of 3 kg per sqm etc complete all as specified and directed by Engineer in Charge. | 115 | Sqm | |
12 | 12 | Material and labour for mirror polished machine cut Kota stone slab 12-15mm thick as in skirting over 10 mm thick backing coat in cement mortar 1:4 set and jointed in neat cement slurry and pointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing and taking down existing plaster etc complete all as specified and directed by Engineer in Charge. | 20 | Sqm | |
13 | 13 | Material and labour for mirror polished black granite tiles 18 to 20 mm thick machine cut, grinded and polished, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match with granite stone shade over 20 mm thick screed in cement mortar 1:6 as in floor complete all as specified and as directed by Engineer-in-Charge. | 250 | Sqm | |
14 | 14 | Material and labour for mirror polished machine cut, black granite tiles 12-15mm thick as in skirting/dado, set and jointed in neat cement slurry and pointed in white or coloured cement to match, with admixture of pigment to match the shade of granite stone including 10mm thick backing coat in cement plaster 1:4 etc complete all as specified and as directed by Engineer-in-Charge. | 6 | Sqm | |
15 | 15 | Material and labour for 100mm thick plain cement concrete 1:2:4 type B2, using 40mm graded stone aggregate as in flooring for hard standing, finished even and fair complete all as specified and as directed by Engineer-in-Charge. | 200 | Sqm | |
16 | 16 | Material and labour for 100mm thick plain cement concrete 1:4:8 type D2, using 40mm graded stone aggregate as in sub base for flooring finished even and fair complete all as specified and as directed by Engineer-in-Charge. | 765 | Sqm | |
17 | 17 | Material and labour for machine pressed precast concrete interlocking paver block of any shape and size conforming to IS 15658-2006 of 60mm thickness, M-35 grade with grey cement and pigment with glossy finish including 20mm thick sand cushioning with watering and consolidation etc complete all as specified and as directed by Engineer-in-Charge.\nMake: Mehtab Tiles/Indore/M/S Ultra Tiles/NITCO/Topaz Tiles/Navya Tiles Jodhpur | 200 | Sqm | |
18 | 18 | Material and labour for anodised aluminium snap grid frame work for false ceiling conforming to IS 733, IS 737 and IS 1285 including all ceiling cleats, 4mm dia GI wire suspender with necessary main tee 35.00 x 23.50 x 1.50mm, cross tee and wall angle of size 23.50 x 23.50 x 1.5 mm with 605 x 605 mm grid system with and including 12mm thick gypsum board with all connected accessories suitably placed in false ceiling grid with necessary design in single / double as per manufacturers instruction including taking down existing false ceiling with snap grid etc complete all as specified and as directed by Engineer-in-Charge. | 200 | Sqm | |
19 | 19 | Taking down/chipping off cement plaster on brick or stone/concrete surfaces, etc. on internal/external surface of wall/ceiling including raking out joints, hacking for key, scrubbing down with water etc and removing debris out side MD land complete all as specified and as directed by Engineer-in-Charge. | 500 | Sqm | |
20 | 20 | Material and labour for rendering 15mm thick (10 + 5) plaster in cement mortar 1:4 on fair faces of the brick or concrete surfaces using water proofing compound @ 3% by the weight of cement as per manufacturer instructions in both coats and finished the surface even and smooth without using extra cement complete all as specified and as directed by Engineer-in-Charge\nNote :- (i) WPC will be measured & paid separately | 250 | Sqm | |
21 | 21 | Supply only water proofing compound, ISI marked complete all as specified and as directed by Engineer-in-Charge. | 25 | Kg | |
22 | 22 | Material and labour for rendering 15mm thick in cement mortar 1:6 on other than fair faces of the brick or concrete surfaces and finished the surface even and smooth without using extra cement complete all as specified and as directed by Engineer-in-Charge\nNote :- (i) WPC will be measured & paid separately | 250 | Sqm | |
23 | 23 | Material and labour for preparation of newly plastered surfaces of wall and applying two coats of Acrylic weather proof coat 100% exterior grade paint over a coat of wall primer as per manufacturer's instructions etc complete all as specified and as directed by Engineer-in-Charge.\nMake : Asian Paint - Apex exterior emulsion 100% acrylic/Berger Paint - Weather coat smooth/Nitco Paint - Outshine premium 100% acrylic exterior | 250 | Sqm | |
24 | 24 | Material and labour for complete removal of existing treatment of old plastered or un plastered decorated surfaces of wall by washing, rubbing down and applying two coats of Acrylic weather proof coat 100 % exterior grade paint over a coat of wall primer as per manufacturer's instructions etc complete all as specified and as directed by Engineer-in-Charge.\nMake : Asian Paint - Apex exterior emulsion 100% acrylic/Berger Paint - Weather coat smooth/Nitco Paint - Outshine premium 100% acrylic exterior | 4000 | Sqm | |
25 | 25 | Material and labour for preparation of new plastered surfaces and applying two coats of distemper oil emulsion over a coat of alkali resistant primer on wall with 1.5mm wall care putty complete all as specified and directed by Engineer in Charge. \nMake : M/s Shalimar - Superlac Stay Clean / M/s Berger - Easy clean / M/s Nerolac - Impressions Eco Clean / M/s Asian (Tractor Brand) | 250 | Sqm | |
26 | 26 | Material and labour for complete removal of existing treatment of old plastered or un plastered decorated surfaces of wall by washing, rubbing down and applying two coats of distemper oil emulsion over a coat of alkali resistant primer on wall with 1.5mm wall care putty complete all as specified and directed by Engineer in Charge. \nMake : M/s Shalimar - Superlac Stay Clean / M/s Berger - Easy clean / M/s Nerolac - Impressions Eco Clean / M/s Asian (Tractor Brand) | 1000 | Sqm | |
27 | 27 | Material and labour for complete removal of existing treatment of old plastered surfaces of ceiling by washing, rubbing down and applying two coats of white wash complete all as specified and directed by Engineer in Charge. \n | 100 | Sqm | |
28 | 28 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed by Engineer-in-Charge. | 60 | Quintal | |
29 | 29 | Material and labour for rolled mild steel sections as in roof trusses (framed), trussed, purlins, crane gantries, rails, and fastenings and heavy bracket framing, (beam , tee, angle, channels or flat sections) including notching, drilling, fitting, riveting and / or welding or connecting with bolts and nuts (including rivets or bolts and nuts) conforming to Fe 290 W Gde E- 250, Quality B complete all as specified and as directed by Engineer-in-Charge. | 9700 | KG | |
30 | 30 | Material and labour for providing Plain cement concrete 1:2:4, type B1 Nominal mix using 20mm graded stone aggregates as in bed block of angle iron post and coping at security wall and the like including weathering, slightly rounded or chamfered angles and throating, as directed including necessary form work for fair finished surfaces complete all as specified and as directed by Engineer-in-Charge. | 1 | Cum | |
31 | 31 | Material and labour for preparation of new steel surfaces of any description over 10cm width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer with all necessary staging, scaffolding etc as required complete all as specified and as directed by Engineer-in-Charge.\nMake : Asian paints/ Nerolac paints / Berger paints / Shalimar paints / Dulux | 525 | Sqm | |
32 | 32 | Supply and fix Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick as per approved profile of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws or L type or J type or cranked hook bolts or as per manufacture instruction complete all as specified and as directed by Engineer-in-Charge.\nMake; JINDAL / INDALCO / HINDALCO / ASSOCIATED Profiles and Aluminium Ltd / ESSAR colour coated sheets | 1525 | Sqm | |
33 | 33 | Supply and fix Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick as per approved profile of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws or L type or J type or cranked hook bolts or as per manufacture instruction complete all as specified and as directed by Engineer-in-Charge.\nMake; JINDAL / INDALCO / HINDALCO / ASSOCIATED Profiles and Aluminium Ltd / ESSAR colour coated sheets | 140 | Sqm | |
34 | 34 | Dismantling of stone slab and tiles of any description or thickness in floor, apron and vertical surfaces, laid bedded, joint and pointed in mortar and removing debris outside MD land complete all as specified and as directed by Engineer-in-Charge. | 36.5 | 10 Sqm | |
35 | 35 | Supply and fix aluminium body door closer, hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000mm in width and of weight between 61 to 80 kg and fixed complete all as specified and as directed by Engineer-in-Charge.\nMake: Everite / Universal / Prabhat Door King / Perfect Hydraulic / Dyana | 10 | Each |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail