}

Take A Break - Mekoozhoor Market Toilet Renovation Toilet Renovation, Mylapra-Kerala

Local Self Government Department has published Take A Break - Mekoozhoor Market Toilet Renovation Toilet Renovation. Submission Date for this Tender is 02-11-2020. Toilet Bathroom Tenders in Mylapra Kerala. Bidders can get complete Tender details and download the document.




Tender Notice

25827977
Take A Break - Mekoozhoor Market Toilet Renovation Toilet Renovation
Open Tender
Indian
Kerala
Mylapra
02-11-2020

Tender Details

Take A Break - Mekoozhoor Market Toilet Renovation Toilet Renovation

Key Value

Document Fees
INR 595 /-
EMD
INR 4470.0 /-
Tender Value
INR 1.78 Lakhs /-

BOQ Items

Work Name:Take a break - Mekkozhoor Market Toilet Renovation
Sl. No. Item Description Item Code / Make Quantity Units
1 1 Toilet Renovation BI01010001010000000000000515BI0100001113
2 1.001 2.8.1 : Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil BI01010001010000000000000515BI0100001114 3.254 cum
3 1.002 4.1.8 : Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 nominal size) BI01010001010000000000000515BI0100001115 1.188 cum
4 1.003 7.1.1 : Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) up to plinth level with:Cement mortar 1:6 (1 cement : 6 coarse sand) BI01010001010000000000000515BI0100001116 3.796 cum
5 1.004 5.1.2 : Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level:1:1:5:3 (1 cement 1.5 coarse sand :3 graded stone aggregate 20 mm nominal size BI01010001010000000000000515BI0100001117 0.237 cum
6 1.005 15.7.4 : Demolishing brick work manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-Charge.In cement mortar BI01010001010000000000000515BI0100001118 1.176 cum
7 1.006 50.6.1.5 : Solid block masonry using pre cast solid blocks ( Factory made) of size 30x20x20cm or nearest available size confirming to IS 2185 Part I of 1979 for super structure up to floor two level thickness 20cm and above in: CM 1:6 ( 1 cement : 6 coarse sand) etc complete BI01010001010000000000000515BI0100001119 3 cum
8 1.007 50.6.1.8 : Solid block masonry using pre cast solid blocks (Factory made) of size 40x20x15cm or nearest available size confirming to IS 2185 part I of 1979 for super structure up to floor two level with thickness 15cm in: CM 1:6 ( 1 cement : 6 coarse sand etc complete BI01010001010000000000000515BI0100001120 1.638 cum
9 1.008 5.3 : Reinforced cement concrete work in beams, suspended floors, roofs, having slope up to 15<sup>0</sup> landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases up to floor five level excluding the cost of centering, shuttering, finishing and reinforcement, with1:1.5:3 (1 cement : 1.5 coarse sand (Zone III) : 3 graded stone aggregate 20 mm nominal size). BI01010001010000000000000515BI0100001121 0.591 cum
10 1.009 5.9.3 : Centering and shuttering including strutting, etc. and removal of form for:Suspended floors, roofs, landings, balconies and access platform BI01010001010000000000000515BI0100001122 5.363 sqm
11 1.01 5.22.6 : Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more BI01010001010000000000000515BI0100001123 63.315 kilogram
12 1.011 5.9.5 : Centering and shuttering including strutting, etc. and removal of form for:Lintels, beams, plinth beams, girders bressumers and cantilevers BI01010001010000000000000515BI0100001124 1.77 sqm
13 1.012 50.9.1.1 : Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately), using good quality Anjili wood /jack wood BI01010001010000000000000515BI0100001125 0.035 cum
14 1.013 50.9.6.1 : Providing and fixing glazed shutters for doors, windows and clerestory windows using 4 mm thick float glass panes including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws. Using Anjili wood / jack wood 30 mm thick shutters BI01010001010000000000000515BI0100001126 0.6 sqm
15 1.014 14.1.1 : Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground within 50 meters lead:With cement mortar 1:4 ( 1 cement : fine sand) BI01010001010000000000000515BI0100001127 5.52 sqm
16 1.015 13.1.2 : 12 mm cement plaster of mix:1:6 (1 cement : 6 fine sand). BI01010001010000000000000515BI0100001128 28.045 sqm
17 1.016 13.16.1 : 6 mm cement plaster of mix:1:3 ( 1 cement : 3 fine sand) BI01010001010000000000000515BI0100001129 7.211 sqm
18 1.017 50.13.1 : 9 mm cement plastering of mix : 1:3 (1 cement : 3 fine sand ) including all cost of materials, labour charges etc complete BI01010001010000000000000515BI0100001130 5.363 sqm
19 1.018 11.36 : Providing and fixing I st quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer -in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. BI01010001010000000000000515BI0100001131 11.6 sqm
20 1.019 11.37 : Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), including pointing the joints with white cement and matching pigment etc., complete. BI01010001010000000000000515BI0100001132 9.975 sqm
21 1.02 od975155/2020_2021 : Supplying and fixing 2mm thick ready made PVC door (75*210cm) with frame 50*42mm including conveyance, cost of fitting, labour for fixing etc. BI01010001010000000000000515BI0100001133 2 each
22 1.021 od975157/2020_2021 : Providing and fixing Sliding door with aluminium frame and fibre BI01010001010000000000000515BI0100001134 2 each
23 1.022 13.43.1 : Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface:Water thinnable cement primer BI01010001010000000000000515BI0100001135 55.18 sqm
24 1.023 13.60.1 : Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade:Two or more coats on new work BI01010001010000000000000515BI0100001136 55.18 sqm
25 1.024 13.61.1 : Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work BI01010001010000000000000515BI0100001137 1.28 sqm
26 1.025 17.7.3 : Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P. brass pillar taps BI01010001010000000000000515BI0100001138 1 each
27 1.026 17.2.1 : Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:W.C. pan with ISI marked white solid plastic seat and lid BI01010001010000000000000515BI0100001139 1 each
28 1.027 od975250/2020_2021 : Designing, fabricating, testing, installing and fixing in position Curtain Wall with&lt;br&gt;Aluminium Composite Panel Cladding, with open grooves for linear as well as&lt;br&gt;curvilinear portions of the building , for all heights and all levels etc. including:&lt;br&gt;a) Structural analysis &amp; design and preparation of shop drawings for pressure&lt;br&gt;equalisation or rain screen principle as required, proper drainage of water to make&lt;br&gt;it watertight including checking of all the structural and functional design.&lt;br&gt;b) Providing, fabricating and supplying and fixing panels of aluminium composite&lt;br&gt;panel cladding in pan shape in metalic colour of approved shades made out of&lt;br&gt;3mm thick aluminium composite panel material consisting of 3mm thick FR grade&lt;br&gt;mineral core sandwiched between two Alumini um sheets (each0.5mm thick). The&lt;br&gt;aluminium composite panel cladding sheet shall be coil coated, with Kynar&lt;br&gt;500based PVDF / Lumiflon based fluoropolymer resin coating of approved colour&lt;br&gt;and shade on face # 1 and polymer (Service) coating on face # 2 as specified using&lt;br&gt;stainless steel screws, nuts, bolts, washers, cleats, weather silicone sealant, backer&lt;br&gt;rods etc.&lt;br&gt;c) The fastening brackets of Aluminium alloy 6005 T5 / MS with Hot Dip Galvanised&lt;br&gt;with serrations and serrated washers to arrest the wind load movement, fasteners,&lt;br&gt;SS 316 Pins and anchor bolts of approved make in SS 316, Nylon separators to&lt;br&gt;prevent bi-metallic contacts all complete required to perform as per specification&lt;br&gt;and drawing The item includes cost of all material &amp; labour component, the cost of&lt;br&gt;all mock ups at site, cost of all samples of the individual components for testing in&lt;br&gt;an approved laboratory, field tests on the assembled working curtain wall with aluminium composite panel cladding, cleaning and protection of the curtain wall&lt;br&gt;with aluminium composite panel cladding till the handing over of the building for&lt;br&gt;occupation. Base frame work for ACP cladding is payable under the relevant&lt;br&gt;aluminium item.s The Contractor shall provide curtain wall with aluminium&lt;br&gt;composite panel cladding, having all the performance characteristics all complete&lt;br&gt;, as per the Architectural drawings, as per item description, as specified, as per the&lt;br&gt;approved shop drawings and as directed by the Engineer-in-Charge.&lt;br&gt;However, for the purpose of payment, only the actual area on the external face of&lt;br&gt;the curtain wall with Aluminum Composite Panel Cladding (including width of&lt;br&gt;groove) shall be measured in sqm. up to two decimal places. BI01010001010000000000000515BI0100001140 5.76 sqm
29 1.028 21.1.1.1 : Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash fasteners to be paid for separately):For fixed portionAnodised aluminium (anodised transparent or dyed to required shade according to IS : 1868, Minimum anodic coating of grade AC 15) BI01010001010000000000000515BI0100001141 7.488 kg
30 1.029 50.17.1.4 : Supplying and fixing CP Health faucet good quality including cost of materials and labour charges etc. complete as per the direction of site engineer-in-charge. BI01010001010000000000000515BI0100001142 1 no
31 1.03 50.17.1.3 : Supplying and fixing CP Towel rod 60cm or nearest available length including cost of materials and labour charges etc complete as per the direction of site Engineer-in-charge. BI01010001010000000000000515BI0100001143 1 no
32 1.031 50.17.1.1 : Supplying and fixing Stainless steel soap dish including cost of materials and labour charges etc complete as per the direction of site Engineer-in-charge. BI01010001010000000000000515BI0100001144 1 no
33 1.032 50.18.9.22.8 : Providing and fixing PVC moulded fittings /accessories for Rigid PVC pipes, including jointing with PVC solvent cement -110 mm dia Vent cowl BI01010001010000000000000515BI0100001145 1 no
34 1.033 18.58.1.1 : Providing and fixing PTMT grating of approved quality and colour.Circular type100 mm nominal dia BI01010001010000000000000515BI0100001146 1 each
35 1.034 50.18.9.9.1 : Providing and fixing PVC pipes includings jointing of pipes with one step PVC solvent cement, trenching, refilling & testing of Joints complete as per direction of engineer in charge.110 mm dia 6Kgf/cm2 BI01010001010000000000000515BI0100001147 3 metre
36 1.035 50.18.7.3.1 : Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer- in- Charge 25 mm dia 12 Kgf/cm2 - Internal work - Exposed on wall BI01010001010000000000000515BI0100001148 5 metre
37 1.036 50.18.8.7.2 : Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc 63 mm pipe 4 kgf/ cm2 BI01010001010000000000000515BI0100001149 3 metre
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail