Kolkata Metropolitan Development Authority-KMDA has published Repair Of Road Near Tb Road And Hospital Road Area , In Panihati ( Municipality ). Submission Date for this Tender is 18-11-2020. Road Repair Tenders in Panihati Municipality West Bengal. Bidders can get complete Tender details and download the document.
| Name of Work:Repair of road near TB Road And Hospital Road area, in Panihati (Municipality) | |||||
|---|---|---|---|---|---|
| Sl. No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Supplying, spreading and compacting Sand to required thickness, in layers not exceeding 150 mm to proper gradient and camber, inundating each layer by water and packing and ramming layer by layer to achieve desired compaction, including lighting, guarding, barricading and making adequate earthen bundh where necessary, curing with water as per direction, mending cracks and depressions by ramming wherever necessary. | 1 | 180 | CUM |
| 2 | 2 | Providing, laying, spreading and compacting\ngraded stone aggregate to Wet Mix Macadam\nspecification including screening of aggregates and granular materials, premixing the material with water at OMC in Wet Mix Plant, carriage of mixed material by tipper to site, laying in uniform layers with Paver in Sub- base / Base course on well prepared surface and compacting with Vibratory Roller to achieve the desired density, including supply of all materials, machinery, fuel and lubricants, including incidental costs for lighting, guarding, barricading, making earthen bundh to protect the edges including cost of quality control complete as per Clause 406 of\nSpecifications for Road & Bridge Works of MoRT&H\n(5th Revision). | 2 | 1125 | CUM |
| 3 | 3 | Construction of Sub Base using Local Materials, spreading in uniform layers with Motor grader on prepared surface, including screening the metal as necessary, mixing by mix in place method with Rotavator at OMC, and compacting with vibratory roller to achieve the desired density, lighting, guarding and barricading including cost and carriage of all materials and making necessary earthen bundh of one metre wide on each side to protect the edges complete as per Clause 401 of Specifications for Road & Bridge Works of MoRT&H (5th Revision).\n(i) For Construction of Sub Base by compacting 1st\nclass brick aggregates (40 mm down) and\nsand (in proportion of 60:40). | 3 | 900 | SQM |
| 4 | 4 | 80 mm thick interlocking designer concrete paver block M-40 grade for medium-traffic zone & utility cuts on arterial roads etc. as per IS: 15658-2006 (over 20-40 mm medium sand bed on 250mm thk WBM/ WMM base course & 250 mm thk bound gnaular/ granular sub-base course & filling the interstices of blocks with fine sand by brooming & subsequent watering including cost of\nsand for sand bed but excluding cost of base, sub-base course & subgrade preparation.) complete as per direction of Engineer-in-Charge.\n[Note: Subgrade CBR shouldnot be less than 5] Grey | 4 | 4500 | SQM |
| 5 | 5 | Brick work with 1st class bricks in cement mortar (1:4)\n(a) in foundation | 5 | 140 | CUM |
| 6 | 6 | Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor).[Excluding cost of chipping over concrete surface]. With 1:4 cement mortar. 20 mm thick plaster | 6 | 1470 | SQM |
| 7 | 7 | Neat cement punning about 1.5mm thick in wall, dado, window\nsill, floor etc.\nNOTE:Cement 0.152 cu.m per100 sq.m. | 7 | 1470 | SQM |
| 8 | 8 | Providing and fixing "typical citizen informatuion board having two nos MS sheet of 1.6 mm tk. 9800mmX750mm size is duly welded with two nos vertical and four nos horizontal MS flat 50mm X 6mm size on back. The ends of the MS flat to be welded with 2 X 2450mm X1150mm frame of MS square 75mmX75mm of 12 SWG sheet, two legs of MS square post to be embedded in cement conc. M15 grade of 600mm X600mm size and 750mm below the gr. level and keeping 50mm ht. above the gr. level, 2 coats of epoxy painting on MS square flat and back side of MS sheetsa with a coat of primer and 2 coats of ready mix approved brand synthetic oil bound paint over a coat of epoxy coated priming on rear side of the MS plate with bands and lettering of different approved shades as diorected as shown in the approved degign with oil bound ready mix synthetic paint . | 8 | 2 | nos |
| 9 | 9 | GST @ 12 % on Sl No 1 TO 8 | 9 | 1 | Total |
| 10 | 10 | Cess @ 1 % On Sl No t1 o 09 | 10 | 1 | Total |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
