}

Repair Maintenance Of Mechanical Laundry And Fittings Fixtures Of Adm Regt Aps Sibia Shopping Complex And Connected Works At Gms, GOPALPUR MILITARY STATION-Odisha

Military Engineer Services-MES has published Repair Maintenance Of Mechanical Laundry And Fittings Fixtures Of Adm Regt Aps Sibia Shopping Complex And Connected Works At Gms. Submission Date for this Tender is 12-11-2020. Civil Work Tenders in GOPALPUR MILITARY STATION Odisha. Bidders can get complete Tender details and download the document.




Tender Notice

25819228
Repair Maintenance Of Mechanical Laundry And Fittings Fixtures Of Adm Regt Aps Sibia Shopping Complex And Connected Works At Gms
National Competitive Bid
Indian
Odisha
GOPALPUR MILITARY STATION
12-11-2020

Tender Details

Repair Maintenance Of Mechanical Laundry And Fittings Fixtures Of Adm Regt Aps Sibia Shopping Complex And Connected Works At Gms

Key Value

Document Fees
INR 500 /-
EMD
INR 40000.0 /-
Tender Value
Refer document

BOQ Items

Name of Work: REPAIR / MAINTENAINCE OF MACHANICAL LAUNDRY AND FITTINGS / FIXTURES OF ADM REGT, APS, SIBIA / SHOPPING COMPLEX AND CONNECTED WORKS AT GMS.
Sl. No. Item Description Item Code / Make Quantity Units
1 1 M& L for replacing Heater box with contactor box having MCB 63 Amp with Heater, Teflon wire 6mm and incoming 16mm (RYB) with complete installation and testing for DRS-30x1 to DRE 30 x 1 1 EachJob
2 2 M&L for replacing Heating Rod of 2000 watt 12 Nos and connected items for installing heating rods for Flat bed Press Model FPS Make: Stefeb 1 Each Job
3 3 M&L for replacement of fuel filter set of two as per existing sample complete all as specified and direted. 2 Nos
4 4 S & F in repair of V-belt for Model No.NXS15 completer all as specified and directed. 2 Nos
5 5 S&F in repair of solenoid cut off switch complete all as specified and directed. 2 Nos
6 6 S&F in repair of push button start stop type complete all specified and directed. 2 Nos
7 7 S&F in repair of Nozzle 4 mm and as per existing sample complete all as specified and directed. 2 Nos
8 8 S&F in repair Diesel feed pump complete all as specified and directed. 1 No.
9 9 S&F in repair of gasket for fuel pump complete all as specified and directed. 2 Nos
10 10 S&F in repair of steam pressure gauge/Auto Relay mechanism type complete all as specified and directed. 2 Nos
11 11 S&F in repair of Checking and thoroughly cleaning of steam supply MS Pipe line to all equipments connection and point complete all as specified and as directed.\nNote: overhauling asbestos rope and aluminium foil paper etc. Are included in the unit rate quoted. 2 Each Job
12 12 S&F in repair of steam line control valve as per existing sample complete all as specified and directed. 2 Nos
13 13 M&L for cleaning of Air compressor Machine air line and air storage tank as per existing sample complete all as specified and directed. 2 Each Job
14 14 S&F in repair of pressure release valve as per existing sample complete all as specified and directed. 2 Nos
15 15 S&F in repair of Air filter for compressor as per existing sample complete all as specified and directed. 2 Nos
16 16 S&F in repair of Air compressor belt compressor as per existing sample complete all as specified and directed. 2 Nos
17 17 S&F in repair of Pressure gauge as per existing sample complete all as specified and directed. 2 Nos
18 18 S&F in repair of Air Valve complete all as specified and directed 2 Nos
19 19 S&F in repair of double function type bearing for washer extractor or drying tumbler of capacity of 30 Kgs including all fitting and fixture washer nut,bolts complete all as specified and directed. 2 Nos
20 20 S&F in repair Vibrator bush as per existing sample complete all as specified and directed. 2 Nos
21 21 S&F in repair of hydraulic type jack oil SAE-90 super cleaning of complete hydraulic pressure (Refilling of oil and sealed with oil cap) completer all as specified and directed. 1 Nos
22 22 Periodical maintenance of following items of Mechanical Laundry complete all as specified and directed.\nItems covered for preventive and breakdown maintenance are:- \n(i) Industrial Water Extractor Model NXS15 – 1 No.\n(ii) Industrial Water Extractor ModelNXS30 – 2 Nos\n(iii) Industrial Drying Tumbler Model DRS 30- 1 No.\n(iv) Flat bed Drying Press Model FPS150\n(v) Air compressor – 1 No. 1 Each Job
23 23 S&F in repair of V Belt of cat no.AX30LP39 B-124 for Industrial Water Extractor ModelNXS30 complete as specified and as directed. make : Stefeb 1 Nos
24 24 Supply Only 3 way Water Solenoid Valve for Industrial washer extractor Model NXS30 complete all as specified and directed. 1 Nos
25 25 Supply Only Door Gasket pump for Industrial washer extractor Model NXS30 complete all as specified and directed. 1 Nos.
26 26 Supply Only Hose Pipe for drain Straight for Industrial washer extractor Model NXS30 complete all as specified and directed. 1 Nos
27 27 Supply only bearing for electric motor for industrial washer extractor model AXS30 complete all as specified and directed. 2 Nos
28 28 Supply Only Limit Switch for drain Straight for Industrial washer extractor Model NXS30 complete all as specified and directed. 2 Nos
29 29 Supply Only High pressure steam Hose Pipe 8 feet for for Industrial washer extractor Model NXS30 complete all as specified and directed. 2 Nos
30 30 Supply Only Hose clamp for Industrial washer extractor Model NXS30 complete all as specified and directed. 2 Nos
31 31 Supply Only water inlet pipe for Industrial washer extractor Model NXS30 complete all as specified and directed. 1 Nos
32 32 Supply Only Fuse Link 4A for Industrial washer extractor Model NXS30 complete all as specified and directed. 2 Nos
33 33 Supply Only Fuse base set for Industrial washer extractor Model NXS30 complete all as specified and directed. 2 Nos
34 34 Supply Only rectifier unit for Industrial washer extractor Model NXS30 complete all as specified and directed. 2 Nos
35 35 Supply Only relay with base for Industrial washer extractor Model NXS30 complete all as specified and directed. 2 Nos
36 36 Supply Only HRC fuse base for flat work drying ironer model FS150 complete all as specified and directed. 2 Nos
37 37 Supply Only HRC fuseLink 4A for flat work drying ironer model FS150 complete all as specified and directed. 2 Nos
38 38 Supply Only contactor for flat work drying ironer model FS150 complete all as specified and directed. 1 Nos
39 39 Supply Only Digital timer for flat bed press model FPS 150 complete all as specified and directed 1 Nos
40 40 Supply Only Teflon sheet for head for flat bed press model FPS 150 complete all as specified and directed 2 Nos
41 41 Supply Only kit for Pneumatic Cylinder for head for flat bed press model FPS 150 complete all as specified and directed 1 Nos
42 42 Supply Only steam trap valve TD3 for head for flat bed press model FPS 150 complete all as specified and directed 1 Nos
43 43 Supply Only air solenoid valve ½” for head for flat bed press model FPS 150 complete all as specified and directed 1 Nos
44 44 Supply Only pressure gauge for air regulator for flat bed press model FPS 150 complete all as specified and directed 2 Nos
45 45 Supply Only coil for air solenoid valve ½” for head for flat bed press model FPS 150 complete all as specified and directed 2 Nos
46 46 S&F in repair of O ring oil seal as per existing sample complete all as specified and directed 2 Nos
47 47 S&F in replacement of MNX12 contactor 12A, 415V, AC 50 Hz supply complete all as specified and directed 1 Nos
48 48 S&F in repair for water solenoid valve1.5” for ASX30 part No.AX30FRA26 complete all as specified and directed 1 Nos
49 49 S&F in repair coil for water solenoid valve1.5” for ASX30 part No.AX30FRA26 complete all as specified and directed 1 Nos
50 50 M&L for replacing bearings idler bearings 2 Nos and main bearing 2 Nos alongwith sleeves dor drying tumbler DRS30 machine for each AX30FRA26 complete all as specified and directed 1 Nos
51 51 S&F in repair motorized reversing timer for DRS 30 part No.D30LP030 complete all as specified and directed 1 Nos
52 52 S&F in repair single phase preventor VSPD-1 complete all as specified and directed 1 Nos
53 53 S&F in repair SS door handle with latch complete all as specified and directed 1 Nos
54 54 Comprehensive maintenance and repairs of electrically operated overhead travelling cranes (EOT) consisting of main girder, cross travel, hoist crab, carriage, long travel drive mechanism, long and cross travel wheel pinions, bearings, rope drum, gear boxes, motors, wire rope, limit switches, overload and time delay relays/resistors, bottom control panels, contactors 3 pole, pendant push button suspension mechanism, etc complete of the following capacities (Spares/items mentioned herein after shall be paid seperately. Cost of any other spares not included in items herein after shall be borne by the contractor):- ( a) EOT Crane 1 Ton to 3 Ton Capacity 6 Each JOb
55 55 Rewinding of 3 phase 415 Volts electric motor of main hoist, creep hoist, long traverse and cross traverse of following capacity with super enamelled copper conductor of gauge as per the existing for the following:- (a) Electric motor above 1 HP but upto and including 3 HP. 3 Each Job
56 56 (b) Electric motor Above 3 HP but upto and including 5 HP. 2 Each Job
57 57 Supply only following spares of EOT cranes (a) MCB SP 6 to 32 Amps, 240V (Make: Schnider Eletric, Havell's, indo asian, L&T) 8 EACH
58 58 (b) MCB two polel 6 to 16 Amps, 240V (Make: Schnider Eletric, Havell's, indo asian, L&T) 8 EACH
59 59 (c) MCB triple pole 6 To 32 Amps, 240 V (Make : Schnider Eletric,, Havell's, indo asian, L&T) 5 EACH
60 60 (d) MCB triple pole and neutral 6 to 32 Amps, 240 V (MakeSchnider Eletric,, Havell's, indo asian, L&T) 3 EACH
61 61 (e) contactors 4 pole 25 Amps, 3Ph, 415V (Make: Schnider Eletric,, L&T, BCH) 3 EACH
62 62 (f) contactors 4 pole 32 Amps, 3Ph, 415V, (Make: Schnider Eletric,, L&T, BCH) 2 EACH
63 63 (g) aux contact block for ML Series 1 NO + 1 NC (Make: Schnider Eletric,, L&T, BCH) 5 EACH
64 64 (h) Illumanated push button switch LED type with accessories (Make Schnider Electric) 12 EACH
65 65 (i) Cable PVC insulated sheathed with copper conductor of size 4Core 2.5Sqmm with metal hose covered 30 RM
66 66 (j) Cable PVC insulated sheathed with copper conductor of size 4Core 1.5Sqmm with metal hose covered 60 RM
67 67 (k) Cable PVC insulated sheathed with copper conductor of size1.5 sqmm 16 core 30 RM
68 68 (l) Ball bearing of Size 6208/6209. make : SKF 3 EACH
69 69 (m) Topping up of Gear box oil 90 Grade Servo in sealed containers. (MAKE:- SERVO/CASTROL) 15 LITRE
70 70 (n) Brake Unit for 100 mm dia for EOT/HOT cranes. (Make BCH / PATHE) 2 EACH
71 71 (o) Brake Unit for 150 mm dia for EOT/HOT cranes. (Make BCH / PATHE) 2 EACH
72 72 (p) Steel wire rope of size 10/12 mm dia construction 6x19 Fibre core suitable for EOT/HOT cranes . Make : Usha martin 30 RM
73 73 (q) Over load relay range 4.5 to 6.5 Amps 3 Each
74 74 (r) Over load relay range 6 to 8.5 Amps 3 Each
75 75 (s) Limit switch 6A roller/lever type for EOT cranes (MakeJai Balagi/L&T/BCH) 2 EACH
76 76 S& F switch socket combination 2-in-1, 5 pin 5 and 15 Amp (Make : Anchor/ Standard/ C&S/Havells/HPL). 20 Each
77 77 S & Fi switch piano (Flush type) 5 amps, 240 Volts, single pole one way. 100 Each
78 78 S & F ceiling fan regulator electronic step type socket mounting type. (Make : Anchor/ Standard/ C&S/Havells/HPL) 50 Each
79 79 S & F LED light fitting 18/ 20 Watt T5 batten type,PVC extruded batten with decorative end caps complete with polycarbonate /glass tube 4Ft White , internally pre-wired and including connecting up with suitable twisted flexible copper conductor cable with suitable size complete all as specified and directed. 750 Each
80 80 S & F of light fittings (2Ft) with wall mounted LED pattern with polycarbonate housing & integrated electronic driver of 9W cap T5(max lenght upto 600mm) complete all as specified and directed. Make :- (Make C&S /WIPRO/ CG / Phillips / Havells) (Note : Contractor shall submit warratny for 03 yrs) 25 Each
81 81 S&F LED Porch light/surface mounting downlighter type with round surface,PDC Al housing light fittings of 10 W cap 3000K incl taking down the old unsv complete all as specified and as directed (Make C&S /WIPRO/ CG / Phillips / Havells) (Note : must for warrenty of 3 yrs to 5 yrs) 40 Each
82 82 Supply and fix in replacement of bldg security light fitting LED type of 20 watt New generation energy saving & environmental friendly long life Versatile pressure die-cast aluminium IP66 luminaire with high power LEDs as light source and electronic driver. mounting bracket suitable to house the light fittinhg , with its Galvanised Flat Iron clamps conntected nuts bolts etc complete all as specified & directed (Make C&S /WIPRO/ CG / Phillips / Havells) (Note : must for warrenty of 3 yrs to 5 yrs) 20 Each
83 83 M&L for replacement of 2 Runs of cable PVC insulated but unsheathed 4.0 Sq mm, stranded copper conductor in and including PVC conduit with continuous earthing cable PVC insulated 2.5 Sq mm, stranded copper conductor complete all as specified and directed. (Cable make Anchor/ Havells /Finolex) 100 RM
84 84 S & F MCCB 100 Amps 4 Pole 25 KA 415Volts (Make : Anchor/ Standard/ C&S/Havells/HPL) 5 Each
85 85 S & F MCCB 63 Amps 4 Pole 16 KA 415Volts (Make : Anchor/ Standard/ C&S/Havells/HPL) 4 Each
86 86 S & F TPN 40 to 63 Amps 415Volts (Make : Anchor/ Standard/ C&S/Havells/HPL) 4 Each
87 87 S & F MCB SPN 16 TO 32 Amp 10 KA 240 Volts (Make : Anchor/ Standard/ C&S/Havells/HPL) 15 Each
88 88 S & F MCB, SP 6 to 30 Amp 240 Volts rating (Make : Anchor/ Standard/ C&S/Havells/HPL) 30 Each
89 89 Supply and fix street light fitting LED type of 30 watt New generation energy saving & environmental friendly long life versatile pressure die-cast aluminium IP66 roadway luminaire with high power LEDs as light source and electronic dirver complete all as specified and as directed. 20 Each
90 90 Supply and fix post-top lantern 25 watt ruby clear energy saving, environmental friendly, long life aesthetically designed with IP 65\nsymmetrical light distribution, spun aluminium landscape luminaire with high power LEDs as light source make : Havells cat part No RUBYPT25WLED757PSYMTOPC or equivalent of Bajaj/CG 11 Each
91 91 Supply and fix in replacement of Driver for 20/25W LED fittings complete all as specifed and as directed Make : C&S / Havells/ HPL/ Sysca 10 Each
92 92 Supply and fix in replacement of MCPCB for 20/25 watts street light fittings with lens complete all as specified and as directed Make : C&S / Havells/ HPL/ Sysca 10 EACH
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail