Delhi Development Authority-DDA has published Maintenance Of Various Sports Complexes / Golf Courses ( A/R And M/O Of Works At Vasant Kunj Sports Complex For The Year 2020-21 ) . General Repair Work , Water Proofing , Plinth Protection Water Supply And Sanitary Fitting And White Wash , Paintin. Submission Date for this Tender is 29-10-2020. Water Proofing Work Tenders in Executive Engineer/Sports Division-1/DDA Delhi. Bidders can get complete Tender details and download the document.
Name of Work: Maintenance of various Sports Complexes / Golf Courses (A/R & M/O of works at Vasant Kunj Sports Complex for the year 2020-21). Sub Head : General repair work, water proofing, plinth protection water supply & sanitary fitting and white wash, painting, other misc. civil work in the gymnasium at Vasant Kunj Sports Complex. Estimated Cost :- Rs.11,83,786/- | |||||
---|---|---|---|---|---|
Sl. No. | Item Description | Item Code / Make | Quantity | Units | |
1 | 1 | Dismantling doors, windows and clerestory windows (steel or wood) shutter including chow hats, architrave, holdfasts etc. complete and stacking within 50 metres lead :\na) Of area 3 sq. metres and below\n | BI01010001010000000000000515BI0100001113 | 58 | each |
2 | 2 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. | BI01010001010000000000000515BI0100001114 | 30 | sqm |
3 | 3 | Dismantling W.C. Pan of all sizes including disposal of dismantled materials i/c malba all complete as per directions of Engineer-in- Charge | BI01010001010000000000000515BI0100001115 | 2 | each |
4 | 4 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminum sections shall be smooth, rust free, straight, mired and jointed mechanically wherever required including cleat angle, Aluminum snap beading for glazing / paneling, C.P.brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :For fixed portion a) Anodised aluminum (anodized transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) | BI01010001010000000000000515BI0100001116 | 448 | kg |
5 | 5 | For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately)\na) Anodized aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15)\n | BI01010001010000000000000515BI0100001117 | 254 | kg |
6 | 6 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): a) With float glass panes of 5.0 mm thickness (weight not less than 12.5 kg/ sqm) | BI01010001010000000000000515BI0100001118 | 17 | sqm |
7 | 7 | Providing and fixing 12 mm thick pre-laminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade Type ll, in paneling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer in-charge. a) Pre-laminated particle board with decorative lamination on both sides | BI01010001010000000000000515BI0100001119 | 8 | sqm |
8 | 8 | Providing and fixing aluminum round shape handle of outer dia 100 mm with SS screws etc. complete as per direction of Engineer-in charge a) Anodized (AC 15 ) aluminum | BI01010001010000000000000515BI0100001120 | 58 | each |
9 | 9 | Providing and fixing aluminum tower bolts, ISI marked, anodized (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : a) 250x10 mm | BI01010001010000000000000515BI0100001121 | 58 | each |
10 | 10 | Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS : 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 kg, for doors, including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in-charge.\n a) With stainless steel cover plate minimum 1.25 mm thickness\n | BI01010001010000000000000515BI0100001122 | 2 | each |
11 | 11 | 12 mm cement plaster of mix :\na) 1:6 (1 cement: 6 fine sand)\n | BI01010001010000000000000515BI0100001123 | 30 | sqm |
12 | 12 | Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge. a) With cement mortar 1:4 (1cement: 4 coarse sand) | BI01010001010000000000000515BI0100001124 | 25 | sqm |
13 | 13 | Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade:\na) One or more coats on old work\n | BI01010001010000000000000515BI0100001125 | 433 | sqm |
14 | 14 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall a) 15 mm nominal outer dia Pipes | BI01010001010000000000000515BI0100001126 | 10 | metre |
15 | 15 | Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm or 340x410x265 mm sizes respectively | BI01010001010000000000000515BI0100001127 | 2 | each |
16 | 16 | Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I.brackets,40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : \na) W.C. pan with ISI marked white solid plastic seat and lid \n | BI01010001010000000000000515BI0100001128 | 2 | each |
17 | 17 | Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 :\na)15 mm nominal bore\n | BI01010001010000000000000515BI0100001129 | 2 | each |
18 | 18 | Providing and fixing jaguar/hind ware health faucet long flexible tube (silver) with fitting and fixtures complete as per direction of Engineer -in-charge. | BI01010001010000000000000515BI0100001130 | 2 | each |
19 | 19 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931\n a) 15 mm nominal bore\n | BI01010001010000000000000515BI0100001131 | 4 | each |
20 | 20 | Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required:-\n(a) White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer\n | BI01010001010000000000000515BI0100001132 | 2 | each |
21 | 21 | Providing and fixing plasticized PVC connection pipe with brass unions. \na)45 cm length-15 mm nominal bore\n | BI01010001010000000000000515BI0100001133 | 23 | each |
22 | 22 | Providing and fixing C.P. Brass extension nipple (size 15mmx50mm) of approved make and quality as per direction of Engineer-in-charge. | BI01010001010000000000000515BI0100001134 | 6 | each |
23 | 23 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete | BI01010001010000000000000515BI0100001135 | 2 | each |
24 | 24 | Providing & fixing 12.5 mm thick fully Perforated Gypsum Board tile made from plasterboard having glass fibre conforming to IS:2095 part I, of size 595x595 mm, having perforation of 9.7x9.7 mm at 19.4 mm c/c with center borders of 48mm and the side borders of 30 mm, backed with non woven tissue on the back side, having an NRC ( Noise Reduction Coefficient) of 0.79, with 50 mm resin bonded glass wool backing. | BI01010001010000000000000515BI0100001136 | 262 | Sqm |
25 | 25 | Providing and laying APP (Ataxic Polypropylene Polymer) modified prefabricated five layer 3 mm thick water proofing membrane, black finished reinforced with non-woven polyester matt consisting of a coat of bitumen primer for bitumen membrane @ 0.40 litre/sqm by the same membrane manufacture of density at 25°C, 0.87-0.89 kg/litre and viscosity 70-160 cps. Over the primer coat the layer of membrane shall be laid using Butane Torch and sealing all joints etc, and preparing the surface complete. The vital physical and chemical parameters of the membrane shall be as under : Joint strength in longitudinal and transverse direction at 23°C as 650/ 450N/5cm. Tear strength in longitudinal and transverse direction as 300/250N. Softening point of membrane not less than 150°C. Cold flexibility shall be upto -2°C when tested in accordance with ASTM, D -5147. The laying of membrane shall be got done through the authorized applicator of the manufacturer of membrane :A) 3 mm thick | BI01010001010000000000000515BI0100001137 | 163 | sqm |
26 | 26 | Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. A) Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) | BI01010001010000000000000515BI0100001138 | 7 | cum |
27 | 27 | Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand (zone - III) : 6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth | BI01010001010000000000000515BI0100001139 | 71 | sqm |
28 | 28 | Providing and fixing gym rubber mat having thickness of 20 mm complete as per the direction of Engineer-in-charge. | BI01010001010000000000000515BI0100001140 | 262 | sqm |
29 | 29 | Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved | BI01010001010000000000000515BI0100001141 | 25 | cum |
30 | 30 | Deduct/ Recover for dismantled Aluminium door & window etc non serviceable material issued to the contractor. | BI01010001010000000000000515BI0100001142 | 60 | Kg |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail