Irrigation And Flood Control Department-IFCD has published Strengthening Of Various Gates Installed On New Pratap Canal And Pargwal Canal .. Submission Date for this Tender is 04-11-2020. Canal Construction Tenders in Akhnoor Jammu And Kashmir. Bidders can get complete Tender details and download the document.
| Name of Work: Strengthening of various gates installed on New Pratap canal & Pargwal canal. | |||||
|---|---|---|---|---|---|
| Sl. No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Strengthening / repair of various regulatory/distributory gates installed on Pargwal canal by way of dismantling of worn-out/damaged winch machine from its hoisting and complete dismantling of gate by cutting of rusted nuts, bolts, washers. Providing / fitting of new winch machine (3T Capacity) as per specifications of existing sample complete. Providing / fitting of new main gear, worm and bearings as per specifications .Fabrication and providing of new stem rod as per the size and specification of the gate. Greasing of worm, gear and bearings. Repairing / strengthening of the the gate leaf and peripheral angular sections by welding of broken ends and removal of bends/dents on the leaf surface. Welding work should be done with good quality electrodes, good works-manship and weld should be gap free, crack free, uniform and non-porous. Excessive weld should be chipped off to avoid any sharp edges.Reassembling of winch machine, anchoring the stem rod and fitment of winch machine on hoisting. Cleaning of both the grooves of gate where the movement of gate occurs.Checking of up/down movement and alignment. Painting of complete gate structure after thorough cleaning with sand paper & patties, applying one coat of red oxide & two coat of anti corrosive super enameled paint at location of gate. Job includes cost of material, labour(skilled/unskilled) and hiring charges of tools/tackles, welding rod ,gas &oxygen cylinder ,fabrication charges and material transportation charges. \nPargwal Canal : 1) Head Gate D2ARD 2400 2) Head Gate Extension RD1650 \n Complete Job\n | Item 1 | 2 | Job |
| 2 | 2 | Strengthening / repair of Direct outlet 21500 & 30900 installed on New Pratap Canal. \nFor DO 21500 - Providing / fitting of new winch & worm gear - except stem rod - (3ton capacity - as per stem rod specification) complete with cover. Straightening of damaged / bent stem rod in hydraulic press. \nFor DO 30900 - Providing / fitting of new stem rod with winch & worm assembly (3ton capacity) complete with cover, rain pipe and base plate. \nShifting of the material to site, followed by lowering of repaired gate structures in the embodiments ,fitment of the winch machine on the hoistings, lowering of the stem rod, fastening and aligning it with the gate for smooth uni-axial vertical up and down travel and testing the complete system.The job includes cleaning of the newly provided winch assembly and repaired gate structure with emery paper followed by application of one coat of red oxide primer and two coats of paint and also greasing work.The job covers the cost of hire charges of tools ,tackles, welding rods, labour charges, fabrication charges, cost of material,to& fro carriage charges etc. Complete Job \nNote:- The above complete job has to be carried out at the following sites :-\nDirect Outlet 21500 \nDirect Outlet 30900 \n\n | Item 2 | 2 | Job |
| 3 | 3 | Strengthening / repair of Direct outlet 44000 & 46000 installed on New Pratap Canal. \nFor DO 44000 - Providing / fitting of new stem rod with winch & worm assembly (3ton capacity) complete with cover, rain pipe and base plate.\nFor DO 46000 - Providing / fabrication / fitting of new winch & worm gear –without stem rod (3ton capacity as per sample and specifications of the stem rod) complete with cover, rain pipe and base plate (as per sample) to replace the damaged worm & winch gear. Straightening of the bent stem rod in hydraulic press. Repair to the gate structure by providing and welding of M.S. sheet to replace the damaged gate leaf. \nShifting of the material to site, followed by lowering of repaired gate structures in the embodiments, fitment of the winch machine on the hoistings, lowering of the stem rod, fastening and aligning it with the gate for smooth uni-axial vertical up and down travel and testing the complete system. The job includes cleaning of the newly provided winch assembly and repaired gate structure with emery paper followed by application of one coat of red oxide primer and two coats of paint and also greasing work. The job covers the cost of hire charges of tools, tackles, welding rods, labour charges, fabrication charges, cost of material, to & fro carriage charges etc. Complete Job \nNote:- The above complete job has to be carried out at the following sites :-\nDirect Outlet 44000\nDirect Outlet 46000 \n | Item3 | 2 | Job |
| 4 | 4 | Repair / strengthening of gates DO-56600 & DO 65900 installed on New Pratap Canal. \nFor Direct Outlet 56600 - Providing / fitting of new stem rod with winch & worm assembly with bearings (3ton capacity) complete with cover, rain pipe and base plate.\nFor Direct Outlet 65900 - Providing / fabrication / fitting of new winch & worm gear with bearings–without stem rod (3ton capacity as per sample and specifications of the stem rod) complete with cover, rain pipe and base plate (as per sample) to replace the damaged worm & winch gear. Straightening of the bent stem rod in hydraulic press. Repair to the gate structure by straightening / welding of gate leaf frame. \nShifting of the material to site, followed by lowering of repaired gate structures in the embodiments, fitment of the winch machine on the hoistings, lowering of the stem rod, fastening and aligning it with the gate for smooth uni-axial vertical up and down travel and testing the complete system. The job includes cleaning of the newly provided winch assembly and repaired gate structure with emery paper followed by application of one coat of red oxide primer and two coats of paint and also greasing work. The job covers the cost of hire charges of tools, tackles, welding rods, labour charges, fabrication charges, cost of material, to & fro carriage charges etc. Complete Job \n\nNote:- The above complete job has to be carried out at the following sites :-\nDirect Outlet 56600 \nDirect Outlet 65900\n | Item 4 | 2 | Job |
| 5 | 5 | Strengthening of DO-83000 gate installed at NPC by way of dismantling it from its hoisitngs and extraction of damaged gate with the help of crane from the embodiment blocks.. Providing / fabrication / fitting of new stem rod with worm assembly as per sample . Strengthening of the gate structure at site by way of welding at various damaged sections . Shifting of the material to site, followed by lowering of repaired gate structure in the embodiments, fitment of the winch machine on the hoisting, lowering of the stem rod, fastening and aligning it with the gate for smooth uni-axial vertical up and down travel and testing the complete system. The job includes cleaning of the winch assembly and repaired gate structure with emery paper followed by application of one coat of red oxide primer and two coats of paint and also greasing work.The job covers the cost of hire charges of tools ,tackles, welding rod, gas & oxygen cylinder, labour charges, fabrication charges, cost of material,to& fro carriage charges etc. Complete Job \n\n | Item 5 | 1 | Job |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
