Military Engineer Services-MES has published Provision Of Lighting Arrester , Open Shed For Furniture Yard Dhobi Ghat And Fencing At Certain Unit Misc Br Work And Certain Rev And Minor Works At Afs Salua Under Ge ( Af ) Kalaikunda. Submission Date for this Tender is 09-12-2020. Lightning Arrester Tenders in GE (AF) Kalaikunda West Bengal. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 26-Nov-2020 | Date postponed | Date | 30-11-2020 |
| 2 | 01-Dec-2020 | Date extn | Date | 05-12-2020 |
| 3 | 07-Dec-2020 | Due Date Extended | Admin Corrigendum Date Extend | 09-12-2020 |
| Name of Work:PROVISION OF LIGHTING ARRESTER , OPEN SHED FOR FURNITURE YARD,DHOBI GHAT AND FENCING CERTAIN UNIT , MISC B&R WORK AND CERTAIN REV AND MINOR WORKS AT AFS SALUA UNDER GE (AF) KALAIKUNDA. | |||||
|---|---|---|---|---|---|
| Sl. No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in soft/loose soil, complete all as specified and directed. | 103 | SQM | |
| 2 | 2 | Excavation in trenches / post holes in hard/dense soil not exceeding 1.5 mtr wide and not exceeding 1.5 meter in depth for taking out and laying cable not exceeding 10 Sqm on plan and getting out, excavated earth, forming bottom surfaces to required level complete all as specified. | 19 | CUM | |
| 3 | 3 | Removing excavated material (soil) not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point. | 4.65 | CUM | |
| 4 | 4 | Returning filling in including spreading leveling watering and well ramming in layers n.exc 25cm thick in soft/loose soil complete all as specified. | 11.75 | CUM | |
| 5 | 5 | Supply and filling in approved dry sand in cable trenches before and after the cables are laid, as in sand cushioning to cables, complete all as specified and directed. | 4.05 | CUM | |
| 6 | 6 | Supplying and laying un-reinforced precast concrete cable cover, Class LV, Type II, flat,size 300mm x 180mmx 40mm complete all as specified and directed | 280 | EACH | |
| 7 | 7 | Excavation in post holes (or similar holes) each not exc. 0.5 Cum and getting out in hard/dense soil returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exc. 25 cm, watering, and removing surplus soil to a distance not exceeding 50 m complete all as specified and as directed | 66 | EACH | |
| 8 | 8 | Materials and Labour for brick work with Sub Class ‘B’ bricks straight or curved\non plan exceeding 6M mean radius built in cement mortar (1:4), complete all as\nspecified and directed. | 15.92 | CUM | |
| 9 | 9 | Materials and Labour for plain cement concrete (1:2:4) Type B-2 using 40 mm graded aggregate in foundations, filling and mass concrete complete all as specified and directed. | 4.3 | CUM | |
| 10 | 10 | Materials and Labour for plain cement concrete (1:4:8) Type D-2 using 40 mm graded aggregate in foundations, filling and mass concrete complete all as specified and directed. | 0.75 | CUM | |
| 11 | 11 | M & L for cement concrete M15 (Nominal Mix) using 40 mm nominal size graded crushed stone aggregate in lintels upto 1.5 m clear span, cills, steps; seismic and other similar bands, \nplinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, ape stones, bed plates, kerbs, water troughs, slab staging for water tanks and the like including weathering, slightly rounded or chamfered angles and throating including necessary formworks complete all as specified and directed by Engineer-in-charge. | 1.3 | CUM | |
| 12 | 12 | M & L for cement concrete M15 (Nominal Mix) using 40 mm nominal size graded crushed stone aggregate in walls or retaining walls, any thickness, size or shape including pilasters, buttresses columns, pillars, boundary pillars and posts (including caps and bases) including necessary formworks complete all as specified and directed by Engineer-in-charge. | 5.4 | CUM | |
| 13 | 13 | Materials and Labour for plain cement concrete M10 (Nominal Mix) using 40 mm graded aggregate as in surface channels and drains complete all as specified and directed. | 0.2 | CUM | |
| 14 | 14 | Removing excavated soils to a distance exceeding 250m but not exceeding 500 Metres and depositing where directed at a level n. exc. 1.5 M above the starting point complete all asspecified and directed. | 6.25 | CUM | |
| 15 | 15 | M & L for Cutting holes in brick walls not exc one brick built in cement mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4, Type B-1 as required complete all as specified and as directed. | 29 | EACH | |
| 16 | 16 | Materials and Labour for rendering 5 mm thick, cement plaster, in cement mortar\n(1:4) mixed with water proofing compound as per manufactures instructions over\nand including 10mm thick backing coat in cement mortar (1:4) on fair faces of\nbrick work or concrete surface in walls, complete all as specified and directed.\nNote: - (Water proofing compound deemed to be included in quoated rates) | 123 | SQM | |
| 17 | 17 | Materials and Labour for rendering 10 mm thick, cement plaster, in cement\nmortar (1:6) on surface other than fair face of brickwork in walls and finishing surface even and smooth without using extra cement, complete all as specified and\ndirected. | 18 | SQM | |
| 18 | 18 | Materials and Labour for, Digital glazed ceramic coloured tiles, 300 X 200 X 7mm thick, conforming to IS 15622, Grade B III, on vertical surface of wall such as dados,\nskirting etc, set and jointed in neat cement slurry and pointed in white or colour\ncement to match over and including 10 mm thick screed bed or bedding layer of cement mortar (1:4), complete all as specified and directed. MAKE: Kajaria/Orient/Somany | 70 | SQM | |
| 19 | 19 | Material and Labour for applying three coats of white wash to new plastered surfaces on walls including preparation of surfaces complete all as specified and directed. | 15 | SQM | |
| 20 | 20 | Materials and Labour for applying applying two coats of acrylic distemper,\nwhite or tinted, to new plastered surfaces on walls, over and includingpriming with alkali resistant priming paint and including preparation of surfaces, complete all as specified and directed. | 18 | SQM | |
| 21 | 21 | Material and Labour for applying two coats of cement-based paint, white or tinted over and including alkali resistant primer to new plastered surfaces on walls,including preparation of surfaces complete all as specified and directed. | 108 | SQM | |
| 22 | 22 | Materials and Labour for, broken stone or boulder hardcore of gauge not exceeding 63 mm, deposited, spread and levelled in layers not exceeding 15 cm thick, watered and rammed to a true surface , complete all as specified and directed. | 11.1 | CUM | |
| 23 | 23 | Materials and Labour for 25 mm thick plain cement concrete (1:2:4) type B0 using 12.5 mm graded aggregates as in floor including finishing surface even and smooth without using extra cement complete all as specified and directed. | 35 | SQM | |
| 24 | 24 | Materials and Labour for 100 mm thick plain cement concrete (1:4:8) type D2\nusing 40 mm graded aggregate as in sub base in floor/paving/hardstanding ,\ncomplete all as specified and directed. | 101 | SQM | |
| 25 | 25 | Materials and Labour for 40 mm thick plain cement concrete (1:2:4) type B1 using 20 mm graded aggregates as in floor including finishing surface even and smooth with using extra cement complete all as specified and directed. | 66 | SQM | |
| 26 | 26 | Pre-polished Chequered cement concrete tiles 30cm x 30cm x 25mm thick, set, jointed and pointed in neat cement slurry with grey cement and pigment in floors, with and including 20mm thick screed bed in cm (1:6) complete all as specified and directed. | 15 | SQM | |
| 27 | 27 | Materials and Labour for RCC Precast Concrete Bench as per RDSO specification Each bench consists of 2 Nos. L-shape base support in gray cement color Base width 620 mm and 5 Nos. reinforced concrete planks in red color of size 1500 mm X 100 mm X 50 mm, and 1 No. of reinforced concrete plank of size 1500 mm X 200 mm X 50 mm Overall Dimensions -Seating length of the Bench 1500 mm -Seating height of the Bench 450 mm -Total height of the Bench 1000 mm All components are reinforced as per rdso specfication, Bench top and back planks are treated with special anti corrosive, water proof coating to make surfaces glossy and water proof All components are manufactured by using M-30 grade of Concrete using vibro compaction process complete all as specified and directed. | 8 | EACH | |
| 28 | 28 | Supply and Fix, Rolled Mild Steel, Fe 410 W (Grade E- 250) Quality-A, in plates (Plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachments, complete all as specified and directed. | 133 | KGS | |
| 29 | 29 | S&F rolled MS sections channel, angle, tee angle and in tubular section as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates conforming Fe 410 -W (Gde- E- 250) quality- A, complete all as specified and directed. | 1930 | KGS | |
| 30 | 30 | Supply and fix mild steel TMT bars 10 mm dia. and over, cut to length, bend to\nshape required including cranking, bending spirally for hopping for columns,\nhooking ends and binding with and including mild steel wire (annealed) not less\nthan 0.9 mm dia. or securing with clips complete all as specified and directed | 315 | KGS | |
| 31 | 31 | S & F mild steel screw bolts (machine made), diameter of neck 11 to 15 mm with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, not exceeding 5 cm long complete all as specified and as directed. | 15 | KGS | |
| 32 | 32 | S & F hot rolled medium and high tensile structural steel of grade E165 as per IS 15911: 2010 as in framed work such as grills, grating, etc., with ends of bars of shouldered and/or riveted, or forged into spikes, framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework water tanks and similar work complete all as specified and directed by Engineer-in-charge. | 155 | KGS | |
| 33 | 33 | S & F for Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete, confirming to Fe 410-W (Grade E-250 Quality A) complete all as specified and as directed. | 524 | KGS | |
| 34 | 34 | Supply and Fix, stainless steel wire cloth, 0.36mm nominal dia. of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, complete all as specified and directed. | 56 | SQM | |
| 35 | 35 | Supply only galvanized steel chain link fence fabric of mesh size 50 mm X 50 mm, made out of 4 mm nominal dia of mesh wire conforming to IS 2712-2003 and having zinc coating of type heavy as laid down in IS-4826 including line wires/ binding complete all as specified and as directed(A Board of Officers under the orders of GE shall be convened to ascertain the weight per square metre of galvanized steel wire chain link fencing brought at site by the contractor against each lot of\nmaterials). Make Tata or equivalent make as approved by GE | 520 | KGS | |
| 36 | 36 | Fixing only galvanized steel chain link fence fencing including line wires any mesh, size and type to any type of standards, rails, straining bolts, etc. including provn of binding wire complete all as specified and as directed. | 140 | SQM | |
| 37 | 37 | S & F hot rolled low tensile structural steel of grade E165 as per IS 15911: 2010 as in hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embedding in concrete and screwing etc. Wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar works complete all as specified and as directed. | 480 | KGS | |
| 38 | 38 | S&F factory made 2nd class hardwood Glazed and skeleton shutters 30 mm thick, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkat complete all as specified and directed | 15 | SQM | |
| 39 | 39 | Supply and Fix,IS markedStainless steel butt hinges, medium weight, cold rolled 100 mm size complete all as specified and directed | 24 | EACH | |
| 40 | 40 | Supply and fix Aluminium anodized barrel tower bolts of extruded section, 100 mm long complete all as specified and directed. | 16 | EACH | |
| 41 | 41 | Supply and Fix, Aluminium Alloy, anodised, sliding door bolt, length of bolt 250 mm, with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, complete all as specified and directed. | 4 | EACH | |
| 42 | 42 | Material and Labour for pre-painted, galvalume aluminium zinc coating GI based\ncorrugated steel sheet, 0.50 mm thick of any colour, having tensile strength of\n550 Mpa, as in roof covering/cladding to wall, fixed with self-tapping screws,\ncomplete all as specified and directed.Make(Tata bluescope/Sexena Marine Tech /JINDAL or equivalent make) | 140 | SQM | |
| 43 | 43 | Material and Labour for pre-painted, galvalume aluminium zinc coating GI based\nplain steel sheet, 0.50 mm thick of any colour, having tensile strength of 550\nMpa, as in roof covering/cladding to wall, fixed with self-tapping screws,\ncomplete all as specified and directed.Make(Tata bluescope/Sexena Marine Tech /JINDAL or equivalent make) | 7 | SQM | |
| 44 | 44 | Material and Labour for applying two coats of synthetic enamel paint over a coat\nof red oxide zinc chrome primer on new steel and iron surface exceeding 10 cm\nin width or girth including preparation of surfaces complete all as specified and\ndirected. | 83 | SQM | |
| 45 | 45 | Material and Labour for applying two coats of synthetic enamel paint over a coat of pink primer on new wood or wood based surface exceeding 10 cm in width or girth including preparation of surfaces complete all as specified and directed. | 32 | SQM | |
| 46 | 46 | S&F sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including\nbedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x160mm complete all as specified and directed MAKE PRAYAG OR equivalent make | 3 | EACH | |
| 47 | 47 | Supply and Fix, waste coupling of PTMT (half or full threaded) (Minimum weight\n45gms), for 32 mm bore discharge pipe,complete all as specified and directed. MAKE PRAYAG OR equivalent make | 3 | EACH | |
| 48 | 48 | Materials and Labour for galvanized steel tubing, medium grade, 15 mm bore with all fittings and fixed complete to walls and ceiling or laid in floor, complete all as specified and directed. | 8 | RM | |
| 49 | 49 | Cutting exiting steel tubing of 15mm bore for alterration or addition (each cut measured) including providing Tee in position without taking down complete all as specified and directed. | 14 | EACH | |
| 50 | 50 | Supply and Fix, 32mm bore, low density polyethylene (LDPE) pipes of pressure rating 6 kgf/sq. cm fixed complete to walls, ceilings or in floors etc., complete all as specified and directed. | 13 | RM | |
| 51 | 51 | Supply and Fix, bib tap, cast copper alloy, fancy type, chromium plated, with crutch or butterfly handle, screwed down, screwed for iron pipe or brass ferrule,15 mm bore and fixed, complete all as specified and directed. Make:Cat No.QQT-7037 of Jaquar or equivalent make of MARC/Kohler) | 3 | EACH | |
| 52 | 52 | S&F Copper Air termination rod 12 mm dia single pointed 300mm long along with base plate welded at bottom of termination rod, of size 10 cm long fabricated out of 32 x 6 mm thick Copper strip along with making 9mm dia for fixing in fastners complete all as specified. | 14 | EACH | |
| 53 | 53 | S&F Copper strip 20 x 3.15mm for roof conductors and bracing to down conductors above ground | 30 | RM | |
| 54 | 54 | S&F of Copper strip 32x6mm for roof conductors and bracing to down conductors above ground | 141 | RM | |
| 55 | 55 | S&F of Porcelain insulator of existing size for isolation of conductor from the building wall by providing 15cm long fastners at every 16 cm distance in the wall complete all as specified. | 195 | EACH JOB | |
| 56 | 56 | S&F for Test Point junction box without terminal block 130x180x77mm IP 66 weather proof including four hexagonal anticorrisove screws for out door installation including provn of Test points as per IS specifications of shape and size 75x75x25 mm drilled and screwed incl 3 nos 8 mm dia 25 mm long hex head screw, made out of phospher bronze mounted and fixed on box with suitable grouting arrangements Suitable nut bolts, washers of various size as approved, complete duly fixed with ground/earth/roof conductor rigidly complete all as specified & directed. | 7 | EACH JOB | |
| 57 | 57 | M&L for brazing of copper earth strip including grinding and prepartion of existing earth strip as directed by the Engineer-in-charge. | 23 | EACH JOB | |
| 58 | 58 | M&L Earthing complete with copper earth plate electrode 600mm x 600mm x 3.15 mm thick burried directr in ground (Earth pit not less than 3.25 m deep below ground level) with top edge of the plate not less than 2.5 m below ground level connected to copper strip 25 X 3.15 mm as earth lead by means of bolts nuts, check nuts and washers of glavanised iron and as shown in electrical plate No 3 connected to earth test point including necessary excavation any type of soil and refilling of pit after placing the electrode with agriculture soil, removal of existing excavated soil upto distance of 100 mtrs. RCC chamber cover plate, wire mess, funnel, test point, 40 mm dia GI protection pipe medium grade and separate pipe of 40 mm dia medium grade GI pipe for watering etc complete and testing on completion. The electrode and lead shall be of copper complete all as specified and directed by Engr-in-charge (Copper strip upto 7.5 RM will be included in the item rate and copper strip beyond 7.5 RM will be measured seperately. NOTE: 1. The unit rate includes for protection GI pipe and watering pipe of 40 mm bore including excavation for earth pit in any type of soil/ disintegrate rock.\n2. Contractor has to bring agriculture soil from outside of defence land and fill in earth pit to achieve desired result as the soil resistiviy is very high.\n3.The cost of Copper strip of size 25X3.15 mm from top of earth plate upto 7.5 meter above ground level is deemed to be included in the unit rate of above item.and copper strip beyond 7.5 RM will be measured seperately. \n4. All the joints in copper strip and connection with Earth Plate to be welded through brazing and in addition by proving brass nut bolt and washer.\n5. Cost of brazing / welding and nut bolts are deemed to be included in the unit rate. 6. Cost includes removal of excavated soil upto a distance of 100 mtrs.(7). The quoted rate includes the rate of Magnesium Sulphate of 40Kg per earth pit poured with salt and charcoal (To obtained earth resistance value and prepare test sheet of newly constructed earth pit shall be responsibility of contractor ) (8). If the desired earth resistance not obtained the earthing shall be re-done by contractor without any extra cost to Govt . | 7 | EACH | |
| 59 | 59 | Supply, installation, testing and commissioning of CPRI approved feeder panel outdoor cubical type factory made of size 0.75x0.75x0.60 m, front and back openable type job with locking arrangement, fabricated of CRCA sheet 3.15 mm thick, Angle Iron ( 55 mm x 55 mm x 5 mm) for support, with following accessories as per manufacturer, instruction deemed to be included in quoated rates :\na) MCCB, 4 pole ,250A, 415 V, 25 KA -01 No\nb) Phase indicator Lamps ( RYB) - set of three\nc) Aluminium bus bar 4 Strip.\nd) PCC foundation \ne) internal wiring for panel incl. insulators, sleeves etc. | 1 | EACH JOB | |
| 60 | 60 | S & F single pole and neutral enclosure with two pin and earth, plug and socket , suitable for single phase 240 V,complete with one single pole MCB of capacity 20 amps having `C` charactristic, breaking capacity 10 KA, including industial plug top, complete all as specified and as directed. Make : Legrand cat part No. 607841 or equivelent in Schinder/ L&T. | 1 | EACH | |
| 61 | 61 | Supply, Installation, Testing and Commissioning of air conditioner, hi wall split\nunits indoor/outdoor complete with cordless remote control unit and with in built air ioniser and plasma filter for better indoor air quality with minimum 4 star rating and EER 3.2.of capacity 1.5 TR, complete all as specified and directed Make'LG'/'Carrier'/'Hitachi'/Voltas | 1 | EACH | |
| 62 | 62 | Supply, install, testing and commissioning of 1 Ph, 2 wire, accuracy class 1.0, base mounting, current range 5-30A, fully static whole current temper proof meter, LCD display, lithium battery backup for LCD disply in case of power failure, with out optical port, Resistance to Surge voltage of 1.2/50 : 10 KV Peak Micro sec, Auto scrolling mode with push button (Manual) Scrolling facility for following parameters: \na) LCD Check,\nb) Real Time & Date,\nc) Instantaneous active load in KW, \nd) Cumulative Active Energy KWh, \ne) Instantaneous voltage, \nf) Instantaneous phase current, \ng) Instantaneous neutral current,\nh) Current MD in KW, \nj) Date and Time stamp for current MD in KW, complete all as specified and as directed. MAKE HPL/L&T OR EQUIVALENT MAKE | 31 | Each |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
