Military Engineer Services-MES has published Repair To Joinery And Allied Works In Zone A Area Of Age Br I Central Under Ge Central Kirkee. Submission Date for this Tender is 11-11-2020. Shed Construction Tenders in KIRKEE Maharashtra. Bidders can get complete Tender details and download the document.
| Name of Work : REPAIR TO JOINERY AND ALLIED WORKS IN ZONE 'A' AREA OF AGE BR-I (CENTRAL) UNDER GE (CENTRAL) KIRKEE. | |||||
|---|---|---|---|---|---|
| Sl. No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Taking down chowkats and frame exc 1.5 Sqm but n.exc 4.00 sqm each including shutter without taking off shutter from the frame and removing from site complete all as specified and directed. | 130 | Each | |
| 2 | 2 | Taking down chowkats and frame n.exc 1.5 Sqm each including shutters without taking off shutters from the frame and removing from site complete all as specified and directed. | 100 | Each | |
| 3 | 3 | Taking down shutter of any description n.exc 1 sqm each and removing to store complete all as specified and directed. | 20 | Each | |
| 4 | 4 | Taking down shutter of any description exc 1 sqm each and but n.exc 2sqm each and removing to store complete all as specified and directed. | 60 | Each | |
| 5 | 5 | Taking down and refixing in same opening with Resecuring or easing & adjusting door shutters of any description exc 1 sqm and n. exc 2 sqm each complete all as specified and directed. | 20 | Each | |
| 6 | 6 | S & F Pressed steel frames made of 1.25 mm thick MS Sheet size 105x60mm for doors, ventilator with single rebates including necessary fixing lugs, hinges, lock strike plate etc including M & L for providing PCC 1:2:4 type B1 (using 20mm graded stone agg) to fill the frame & making good complete all as specified & directed. | 225 | RM | |
| 7 | 7 | S & F Pressed steel frames made of 1.25 mm thick MS Sheet size 125x60mm for doors, ventilator with double rebates including necessary fixing lugs, hinges, lock strike plate etc including M & L for providing PCC 1:2:4 type B1 (using 20mm graded stone agg) to fill the frame & making good complete all as specified & directed by Engr-in-Charge. | 200 | RM | |
| 8 | 8 | S&F Flush shutters 35 mm thick solid core construction, with block board core and plywood face panels, commercial type on both sides with covered with decorative face veneer with lipping/frame to match complete all as specified and directed. | 90 | Sqm | |
| 9 | 9 | 35mm thick second class hard wood plain, framed panelled shutters (any numbers of pannels) with panels of timber flat on both side (feathered edges) or of veneered particle board medium density, wood particle board with commercial face veneers supplied and fitted to chowkat complete all as specified and directed. | 120 | Sqm | |
| 10 | 10 | M&L for 35 mm thick 2nd class hard wood glazed/gauged and skelton door shutter, factory made, open rebated and prepared to receive glass/guage etc. (without sash bar) edge of frames plain, chamfered or rounded, fitted with cut & mitred beads for securing glass/guage etc size of member as specified in SSR Part I Section 8 clause 8.24(a) and fixed to chowkat, complete all as specified. | 110 | Sqm | |
| 11 | 11 | S&F 200mm size Aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed. | 300 | Each | |
| 12 | 12 | S&F 150mm size Extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed. | 300 | Each | |
| 13 | 13 | S & F aluminium anodised sliding door bolt plate type, not less than 12 mm dia with and inclding aluminimum of 6 bolts and nuts, 4 on bolt plate and 2 on staple plate length of bolt 300 mm welded to door shutter/frame complete all as specified and as directed. | 80 | Each | |
| 14 | 14 | S & F Factory made internal PVC door frame of size 50x47mm single revated made out of extruded 5 mm PVC foam sheet, mitre cut at two corners and jointed with 02 Nos of 150 mm brackets of 15x15 mm MS square tube. The two vertical door profiles are to be in forced with 40x20 mm MS tube of 19 gauge through out the frame complete all as specified and directed. | 270 | RM | |
| 15 | 15 | S & F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing. | 84 | Sqm | |
| 16 | 16 | S&F 100mm long stainless steel medium weight but hinges for door shutter and frames complete all as specified and directed. | 15 | Each | |
| 17 | 17 | S&F 75mm long stainless steel medium weight but hinges for door shutter and frames complete all as specified and directed. | 180 | Each | |
| 18 | 18 | S & F aluminium anodised barrel tower bolts of extruded section and fixed 150 mm long complete all as specified and directed. | 120 | Each | |
| 19 | 19 | S & F aluminium anodised handle, oval type, of size 150mm, fixed with screws or welded, complete all as specified. | 120 | Each | |
| 20 | 20 | M & L for 16 to 18mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like over 15mm thick cement plaster in CM (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including demolition of stone slab and tiles of any description or thickness in floor apron etc complete all as specified and directed. | 25 | Sqm | |
| 21 | 21 | S & F three track aluminium alloy powder coated windows including aluminum powder coated frames sliding track, bottom weighing not less than 1.015 kg/RM, sides and top not less than 0.826 kg/RM double revated and 0.55 kg for window shutter with one fixed glazed shutter and two nos glazed/gauged shutter sliding type with aluminium sections as per series - A (15mm) 3 track of Jindal section numbers for sliding windwos with framed shutter including aluminium alloy powder coated snap type beads handles with locking arrangement spring action and glazing clip joint cleats rubber gaskets etc including provision of 5.5mm thick tinted glass/frosted glass of superior quality and stainless steel jali including all standard fittings complete all as specified & directed. | 80 | Sqm | |
| 22 | 22 | S & F for aluminum alloy powder coated door including frame and channel of section (Door frame single groove 101.6mm x 44.45mmx1.25mm, shutter top section 47.62mm x 44.45mmx1.25mm thick, shutter bottom section 114.30mm x 44.45mm x 1.25mm thick, shutter vertical section 85mm x 44.45mm x 1.80mm thick, shutter middle section 83.50mm x 44.45mm x 1.25mm thick & glazing clips weighing not less than 0.097 kg/RM) including shutter fixed to sliding type/openable frame and channel as directed and approved by GE and as per IS specifications including provn of 5.5mm thick tinted glass/12mm thick prelaminated particle board as required including handles, tower bolt, door stopper complete all as specified & directed. | 20 | Sqm | |
| 23 | 23 | S & F aluminium alloy powder coated glazed or skelton shutter including frame of section ( door frame single groove 85mmx45 mm x 1.25mm thick, shutter top section, bottom section, middle section and vertical section 65 mm x 45 mm x 1.25 mm thick and glazing clips weighing not less than 0.097 Kg/RM ) including shutter fixed to frame as directed and as per IS specifications including S & F mild steel wire cloth 0.56mm dia and apperture 1.4mm and required handles, tower bolt, rubber gasket complete. | 10 | Sqm | |
| 24 | 24 | S&F aluminium louvered ventilators of section size 80mmx20mmx1.50mm including 5mm thick frosted glass fixed in half portion & adjustable type louvers in another half and stainless steel wire mesh fixed type on outside frame etc. complete all as directed. | 10 | Sqm | |
| 25 | 25 | S&F Door closer hydraulically regulated, Aluminium (extrude section) body designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg, complete all as specified and directed. | 10 | Each | |
| 26 | 26 | S&F for Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and directed. | 100 | Sqm | |
| 27 | 27 | S&F for Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete without glazing bars, dovetailed or welded complete all as specified and directed. | 100 | Sqm | |
| 28 | 28 | S&F for mild steel window guard bars, plain, let in and fixed independently in wooden frames, L or T section supports for shelves etc. and similar articles conforming to Fe-290 Gde E-165 complete all as specified and directed. | 500 | Kg | |
| 29 | 29 | Hacking out old broken glass exc 1.5 sqm (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed. | 60 | Sqm | |
| 30 | 30 | S&F 3mm thick sheet glass ordinary quality & glazing with oil putty or fitted with beads in squares n.exc. 0.50 sqm in each pane complete all as specified and directed. | 150 | Sqm | |
| 31 | 31 | S & F Galvanised mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm complete all as specified and directed. | 82.5 | Sqm | |
| 32 | 32 | M & L for timber, 2nd class WH, plain fillets, square, rectangular or triangular in section, wrought, fixed with screws, sectional area exc 15sqcm but n. exc 25sqcm. Including dismantling existing fillets, complete all as specified and directed. | 150 | RM | |
| 33 | 33 | S & F in repair Galvanised mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm complete all as specified and directed. | 150 | Sqm | |
| 34 | 34 | S&F 2nd class HW plain solid straight chowkhats/frame wrought framed rebated on the solid, rounded or chamfered put together with glue pinned at joints complete all as specified and directed. | 0.5 | Cum | |
| 35 | 35 | S&F 25mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides one face is covered with decorative face veneer with lipping/frame to match as in cupboard door shutters complete all as specified and directed. | 40 | Sqm | |
| 36 | 36 | S & F in repair 18-19mm thick prelaminated particle board prelaminated one side grade 2 quality interior grade commercial type including 6 mm thick teak wood leaping, as in cupboards, kitchen cabinet, pelment box and in similar works complete all as specified and as directed. | 60 | Sqm | |
| 37 | 37 | S & F in repair Continuous (piano) hinges, mild steel, bright finish or electrogalvanised Width of flaps (when open) in 40mm complete all as specified and directed. | 110 | RM | |
| 38 | 38 | S&F in repair 40mm dia, cupboard knobs fixed with nut, screw and washer of mild steel, bright finished complete all as specified and directed. | 40 | Each | |
| 39 | 39 | S&F in repair 75mm Hasp and staple, safety type, Aluminium with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed. | 40 | Each | |
| 40 | 40 | S&F in repair 300mm, ordinary rat tail rod pattern springs including roller and roller plate fixing in wooden or steel door frame using nails or welding complete all as specified and directed. | 25 | Each | |
| 41 | 41 | S&F in repair Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, overall length of cover plate 140mm complete all as specified and directed. | 40 | Each | |
| 42 | 42 | Running welding in repairs thickness of metal to be welded n exc 6mm complete all as specified and as directed. | 60 | 10 CM | |
| 43 | 43 | Taking down cement plaster on brick or stone walls or concrete surfaces etc including raking out joints, hacking for key, scrubbing down with water complete all as specified and directed. | 250 | Sqm | |
| 44 | 44 | M & L rendering 10 mm thick on concrete surfaces in CM 1:6, finished with sagol finish on plastered surface of internal wall, complete all as directed. | 100 | Sqm | |
| 45 | 45 | M & L rendering 20 mm thick in two layers(10mm thick each) on stone masonry surfaces in CM 1:4, finished even and smooth without using extra cement complete all as specified and as directed. | 30 | Sqm | |
| 46 | 46 | M&L for rendering 15mm thick plaster in cm (1:4) on fair faces of brick work or concrete surfaces including finishing the surface fair and even with and including water proofing compound 3% by weight of cement all as specified and directed. | 100 | Sqm | |
| 47 | 47 | M & L rendering 5 mm thick on concrete surfaces as in ceiling in CM 1:3, finished with sagol finish complete all as directed. | 20 | Sqm | |
| 48 | 48 | M & L for preparing newly plastered surfaces of wall including preparation of surfaces and applying two coats of oil bound distemper over a coat of primer on wall surfaces complete as specified and directed. | 100 | Sqm | |
| 49 | 49 | M & L for Preparation of new surfaces (Plastered or un-plastered) of walls and applying two coats of cement base paint over a coat of primer complete all as specified. | 100 | Sqm | |
| 50 | 50 | M&L for preparation of new plastered surfaces and applying three coats of white wash on ceiling/chajjas complete all as specified and directed. | 20 | Sqm | |
| 51 | 51 | Material and labour for preparation of new steel and iron surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primere complete all as specified. | 523.63 | Sqm | |
| 52 | 52 | M & L for preparing new or previously untreated wood surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified | 1114 | Sqm | |
| 53 | 53 | S & F Collapsible steel gates, top hung, consisting for channel pickets, pivoted flat bars, top and bottom runners, brass handles etc., as specified, erected in position and securing runners with holdfasts and brackets including taking down existing Collapsible steel gates complete all as directed. | 20 | Sqm | |
| 54 | 54 | S&F for 20mm dia curtain rails, anodised aluminium alloy with brackets, stops, rollers etc. complete all as specified and directed by Engr-in-Charge. | 300 | RM | |
| 55 | 55 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed. | 15 | Per Qtl | |
| 56 | 56 | S & F for Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete conforming to Fe-410-W(Gde- E-250) quality - A complete all as specified and as directed. | 1500 | Kg | |
| 57 | 57 | S&F in repair Mild steel, plain, black sheet 1.00 mm thick in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required complete all as specified and directed. | 100 | Sqm | |
| 58 | 58 | S&F Steel rolling shutters, Thickness of laths in 1.25mm with ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, complete: push pull or manual type including taking down existing rolling shutter, complete all as specified and directed. | 60 | Sqm | |
| 59 | 59 | Taking down rolling shutter push pull or manual type including taking down accessories like shaft, top cover, guide channel after straightening/ rectify warped/buckled parts and replacing unserviceable components with new with and including cleaning/overhauling greasing etc including Re-fixing complete to walls/RCC members all as directed by the Engineer-in-Charge. (All new components/accessories will be measured and paid separately as supply only under relevant item of schedule) | 90 | Sqm | |
| 60 | 60 | All as specified in item No 59 above but gear operated type with bevel gear box and crank handle. (All new components/accessories will be measured and paid separately as supply only under relevant item of schedule). | 15 | Sqm | |
| 61 | 61 | Supply only suspension shaft of dia 40 mm including springs (for upto 3 Mtr wide shutter) complete all as specified and directed. | 35 | RM | |
| 62 | 62 | Supply only suspension shaft of dia 50 mm including springs ( for exc 3 Mtr but not exc 6 Mtr wide shutter) complete all as specified and directed. | 18 | RM | |
| 63 | 63 | Supply only guide channel of width 65 mm deep & 25 mm wide and 3.15mm thick all as specified and as directed by Engr-in-Charge. | 45 | RM | |
| 64 | 64 | Supply only ball bearing for rolling shutter all as specified and as directed by Engr-in-Charge. | 12 | Each | |
| 65 | 65 | Supply only gear box and crank handle all as specified and as directed by Engr-in-Charge. | 10 | Each | |
| 66 | 66 | Safety lever locks mild steel with 4 levers for fixing in rolling shutters, complete all as specified and directed all as specified and as directed by Engr-in-Charge. | 10 | Each | |
| 67 | 67 | M&L for preparation of new Surfaces of any description, over 10cm in width or girth, not otherwise described and applying two coat of aluminium paint complete all as directed. | 120 | Sqm |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
