Uttranchal Jal Vidyut Nigam Ltd-UJVNL has published Maintenance And Repair Works Of Dhakrani Power House Colony At Dhakrani. Submission Date for this Tender is 19-11-2020. Building Repair Tenders in Executive Engineer PCM Dhalipur Dehradun Uttarakhand. Bidders can get complete Tender details and download the document.
Name of Work: M&R works of Dhakrani Power House Colony at Dhakrani | |||||
---|---|---|---|---|---|
Sl. No. | Item Description | Item Code / Make | Quantity | Units | |
1 | 1 | Earth work in excavation by mechanical means (Hydraulic Excavator )/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil. Including supply of all material, labour, T&P etc required for proper completion of the work. | BI01010001010000000000000515BI0100001113 | 10 | Cum |
2 | 2 | Demolishing brick work, manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge.All kinds of soil. Including supply of all material, labour, T&P etc required for proper completion of the work. | BI01010001010000000000000515BI0100001114 | 5 | Cum |
3 | 3 | Dismantling old plaster or skirting/Dado raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead.Including supply of all material, labour, T&P etc required for proper completion of the work. | BI01010001010000000000000515BI0100001115 | 200 | Sqm |
4 | 4 | Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer in charge. 1:3:6 or richer mix Including supply of all material, labour, T&P etc required for proper completion of the work. | BI01010001010000000000000515BI0100001116 | 10 | Cum |
5 | 5 | Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer in charge. 1:4:8 or leaner mix Including supply of all material, labour, T&P etc required for proper completion of the work. | BI01010001010000000000000515BI0100001117 | 5 | Cum |
6 | 6 | Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge. Including supply of all material, labour, T&P etc required for proper completion of the work. | BI01010001010000000000000515BI0100001118 | 3 | Cum |
7 | 7 | Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. Including supply of all material, labour, T&P etc required for proper completion of the work. | BI01010001010000000000000515BI0100001119 | 100 | Sqm |
8 | 8 | Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. Including supply of all material, labour, T&P etc required for proper completion of the work. | BI01010001010000000000000515BI0100001120 | 2000 | Sqm |
9 | 9 | Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead. Of area 3 sq. metres and below.Including supply of all material, labour, T&P etc required for proper completion of the work | BI01010001010000000000000515BI0100001121 | 20 | Each |
10 | 10 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead For thickness of tiles 10 mm to 25 mm | BI01010001010000000000000515BI0100001122 | 50 | Sqm |
11 | 11 | Dismantling roofing including ridges, hips, valleys and gutters etc., and stacking the material within 50 metres lead of G.S. Sheet\n | BI01010001010000000000000515BI0100001123 | 100 | Sqm |
12 | 12 | Dismantling roofing including ridges, hips, valleys and gutters etc., and stacking the material within 50 metres lead of Asbestos cement sheet\n | BI01010001010000000000000515BI0100001124 | 100 | Sqm |
13 | 13 | Dismantling of flushing cistern of all types (C.I./PVC/Vitrious China) including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead.\n | BI01010001010000000000000515BI0100001125 | 30 | Each |
14 | 14 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level. 1:3:6 (1 Cement : 3 coarse sand (zone-III): 6 graded stone aggregate 40 mm nominal size) Including supply of all material, labour, T&P etc required for proper completion of the work | BI01010001010000000000000515BI0100001126 | 8 | Cum |
15 | 15 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering -All work up to plinth level and in kerbs, steps and the like at or near ground level. 1:2:4 (1 Cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size).Including supply of all material, labour, T&P etc required for proper completion of the work. | BI01010001010000000000000515BI0100001127 | 10 | Cum |
16 | 16 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15 degree landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases up to floor five level excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size)Including supply of all material, labour, T&P etc required for proper completion of the work. | BI01010001010000000000000515BI0100001128 | 3 | Cum |
17 | 17 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation7.5 in foundation and plinth in Cement mortar 1:6 (1 cement : 6 coarse sand). Including supply of all material, labour, T&P etc required for proper completion of the work. | BI01010001010000000000000515BI0100001129 | 5 | Cum |
18 | 18 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in in Cement mortar 1:6 (1 cement : 6 coarse sand). Including supply of all material, labour, T&P etc required for proper completion of the work. | BI01010001010000000000000515BI0100001130 | 5 | Cum |
19 | 19 | Half brick masonry with F.P.S. bricks of class designation 75 in superstructure above plinth level upto floor V level in Cement mortar 1:4 (1 cement :4 coarse sand)Including supply of all material, labour, T&P etc required for proper completion of the work. | BI01010001010000000000000515BI0100001131 | 50 | Sqm |
20 | 20 | Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement: 6 coarse sand : 12 graded stone aggregate 20mm nominal size) at plinth level with Cement mortar 1:6 (1 cement : 6 coarse sand) Including supply of all material, labour, T&P etc required for proper completion of the work. | BI01010001010000000000000515BI0100001132 | 1 | Cum |
21 | 21 | Random rubble masonry with hard stone in superstructure above plinth level and upto floor five level,including leveling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20mm nominal size) at window sills, ceiling level and the like with Cement mortar 1:6 (1 cement : 6 coarse sand)Including supply of all material, labour, T&P etc required for proper completion of the work. | BI01010001010000000000000515BI0100001133 | 1 | Cum |
22 | 22 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position. Sal wood.Including supply of all material, labour, T&P etc required for proper completion of the work. | BI01010001010000000000000515BI0100001134 | 0.392 | Cum |
23 | 23 | Providing and fixing ISI marked oxidised M.S.sliding door bolts with nuts and screws etc 300x16mm .Including supply of all material, labour, T&P etc required for proper completion of the work. | BI01010001010000000000000515BI0100001135 | 20 | Nos |
24 | 24 | Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc.150x10 mm .Including supply of all material, labour, T&P etc required for proper completion of the work. | BI01010001010000000000000515BI0100001136 | 20 | Nos |
25 | 25 | Providing and fixing ISI marked oxidised M.S.handles conforming to IS:4992 with necessary screws etc. 100 mm . Including supply of all material, labour, T&P etc required for proper completion of the work. | BI01010001010000000000000515BI0100001137 | 20 | Nos |
26 | 26 | Providing and fixing ISI marked oxidised M.S. pressed butt hinges with necessary screws etc. 100x58x1.90 mm . Including supply of all material, labour, T&P etc required for proper completion of the work. | BI01010001010000000000000515BI0100001138 | 40 | Nos. |
27 | 27 | Providing and fixing ISI marked M.S. pressed butt hinges bright finished 50x37x1.50 mmIncluding supply of all material, labour, T&P etc required for proper completion of the work. | BI01010001010000000000000515BI0100001139 | 20 | Nos |
28 | 28 | Providing and fixing ISI marked oxidised M.S. single acting spring hinges 150mmIncluding supply of all material, labour, T&P etc required for proper completion of the work. | BI01010001010000000000000515BI0100001140 | 5 | Nos. |
29 | 29 | Providing and fixing aluminium hanging floor door stopper ISI marked anodised. Twin rubber stopper. Including supply of all material, labour, T&P etc required for proper completion of the work. | BI01010001010000000000000515BI0100001141 | 10 | Nos. |
30 | 30 | Providing and fixing fly proof galvanised M.S. wire gauge to windows and clerestory. With 2nd class teak wood beading 62X19 mm.Including supply of all material, labour, T&P etc required for proper completion of the work. | BI01010001010000000000000515BI0100001142 | 55 | Sqm. |
31 | 31 | Providing and fixing fly proof galvanised M.S. wire gauge to windows and clerestory. With 12 mm mild steel U beading.Including supply of all material, labour, T&P etc required for proper completion of the work. | BI01010001010000000000000515BI0100001143 | 42 | Sqm |
32 | 32 | Renewing glass panes, with putty and nails wherever necessary Float glass panes of thickness 4 mm.Including supply of all material, labour, T&P etc required for proper completion of the work. | BI01010001010000000000000515BI0100001144 | 50 | Sqm. |
33 | 33 | Refixing old glass panes with putty and nails.Including supply of all material, labour, T&P etc required for proper completion of the work. | BI01010001010000000000000515BI0100001145 | 20 | Sqm. |
34 | 34 | Renewal of old putty of glass panes(length) Including supply of all material, labour, T&P etc required for proper completion of the work. | BI01010001010000000000000515BI0100001146 | 20 | Rm |
35 | 35 | Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete. Reinforcement for R.C.C. Work Using Mild Steel and Medium /Tensile Steel Bars. Including supply of all material, labour, T&P etc required for proper completion of the work. | BI01010001010000000000000515BI0100001147 | 283 | kg |
36 | 36 | Structural steel work in single section fixed with or without connecting plate including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. Including supply of all material, labour, T&P etc required for proper completion of the work. | BI01010001010000000000000515BI0100001148 | 450 | Kg |
37 | 37 | Fencing with angle iron post placed at required distance embedded in cement concrete blocks, every 15th post, last but one end post and corner post shall be strutted on both sides and end post on one side only and provided with horizontal lines and two diagonals interwoven with horizontal wires, of barbed wire 9.38 kg per 100 m (minimum) between the two posts fitted and fixed with G.I. staples, turn buckles etc. complete. (Cost of posts, struts, earth work and concrete work to be paid for separately) :- Payment to be made per metre cost of total length of barbed wire used with G.I. barbed wire. Including supply of all material, labour, T&P etc required for proper completion of the work. | BI01010001010000000000000515BI0100001149 | 20 | RM |
38 | 38 | Providing and fixing G.I. chain link fabric fencing 25x25mm made of G.I. wire of dia 3 mm including strengthening with 2mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer-in-charge. Made of G.I. wire of dia 4mm.Including supply of all material, labour, T&P etc required for proper completion of the work. | BI01010001010000000000000515BI0100001150 | 20 | Sqm |
39 | 39 | Providing and fixing curtain rods of 1.25 mm thick 25 mm dia.Including supply of all material, labour, T&P etc required for proper completion of the work. | BI01010001010000000000000515BI0100001151 | 57 | RM |
40 | 40 | Providing corrugated G.S. sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead and including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete upto any pitch in horizontal/vertical or curved surfaces) excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 0.63mm thick with zinc coating not less than sq.m 275gm/m Including supply of all material, labour, T&P etc required for proper completion of the work. | BI01010001010000000000000515BI0100001152 | 53 | Sqm |
41 | 41 | 12 mm cement plaster of mix 1:6 (1 cement : 6 coarse sand). Including supply of all material, labour, T&P etc required for proper completion of the work. | BI01010001010000000000000515BI0100001153 | 300 | Sqm |
42 | 42 | 12 mm cement plaster of mix 1:4 (1 cement : 4 coarse sand) . Including supply of all material, labour, T&P etc required for proper completion of the work. | BI01010001010000000000000515BI0100001154 | 50 | Sqm |
43 | 43 | Cement plaster skirting (up to 30 cm height) with cement mortar 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement. 18 mm thick. Including supply of all material, labour, T&P etc required for proper completion of the work. | BI01010001010000000000000515BI0100001155 | 10 | Sqm |
44 | 44 | Providing and fixing glass strips in joints of metre terrazo/ cement concrete floors. 40 mm wide and 4 mm thick. Including supply of all material, labour, T&P etc required for proper completion of the work. | BI01010001010000000000000515BI0100001156 | 159 | RM |
45 | 45 | Cement concrete flooring 1:2:4 (1 cement: 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry, but excluding the cost of nosing of steps etc. complete. 40mm thick with 20mm nominal size stone aggregate.Including supply of all material, labour, T&P etc required for proper completion of the work. | BI01010001010000000000000515BI0100001157 | 250 | Sqm |
46 | 46 | Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete. | BI01010001010000000000000515BI0100001158 | 200 | Sqm |
47 | 47 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade: Two or more coats on new work Including supply of all material, labour, T&P etc required for proper completion of the work. | BI01010001010000000000000515BI0100001159 | 100 | Sqm |
48 | 48 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : One or more coats on old work.Including supply of all material, labour, T&P etc required for proper completion of the work. | BI01010001010000000000000515BI0100001160 | 200 | Sqm |
49 | 49 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade New work (two or more coats) over and including priming coat with cement primer. Including supply of all material, labour, T&P etc required for proper completion of the work. | BI01010001010000000000000515BI0100001161 | 200 | Sqm |
50 | 50 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade : Old work (one or more coats). Including supply of all material, labour, T&P etc required for proper completion of the work. | BI01010001010000000000000515BI0100001162 | 1000 | Sqm |
51 | 51 | Lettering with black Japan paint of approved brand and manufacture.Including supply of all material, labour, T&P etc required for proper completion of the work. | BI01010001010000000000000515BI0100001163 | 200 | CM |
52 | 52 | Re-lettering with black Japan paint of approved brand and manufacture. Including supply of all material, labour, T&P etc required for proper completion of the work. | BI01010001010000000000000515BI0100001164 | 100 | CM |
53 | 53 | Hire charges of welding machine with single phase with welder, helper and electrodes etc. for repair and welding of gates, door, window etc. for 8 hrs. in a day complete with all material labour, T&P etc. required for proper completion of work.(As per previous approved Argreement/copy attached) | BI01010001010000000000000515BI0100001165 | 24 | Job |
54 | 54 | Attending minor type of repair for full day by engaging and supplying one suitable carpenter/ /Mason /Plumber for carrying simple type of repairing of all work including all T&P etc. complete but excluding cost of material.(As per approved analysis) | BI01010001010000000000000515BI0100001166 | 72 | Job |
55 | 55 | Attending minor type of repair for full day by engaging and supplying one suitable Beldar/mazdoor for carrying simple type of repairing of all work including all T&P etc. complete but excluding cost of material.(As per approved analysis) | BI01010001010000000000000515BI0100001167 | 78 | Job |
56 | 56 | Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6mm angle iron and 3mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. Using flats 30x6mm for diagonal braces and central cross piece.Including supply of all material, labour, T&P etc required for proper completion of the work. | BI01010001010000000000000515BI0100001168 | 20 | Sqm |
57 | 57 | Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I)non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws.Including supply of all material, labour, T&P etc required for proper completion of the work. | BI01010001010000000000000515BI0100001169 | 40 | Sqm |
58 | 58 | Providing and fixing brass bib cock of approved quality, 15 mm nominal bore.Including supply of all material, labour, T&P etc required for proper completion of the work. | BI01010001010000000000000515BI0100001170 | 50 | Nos |
59 | 59 | Providing and fixing PTMT bib cock of approved quality and colour.15 mm nominal bore, 93 mm long, weighing not less than 110 grams.Including supply of all material, labour, T&P etc required for proper completion of the work. | BI01010001010000000000000515BI0100001171 | 268 | Nos |
60 | 60 | Providing and fixing PTMT pillar cock of approved quality.15mm nominal bore,107 mm long, weighing not less than 110 gms.Including supply of all material, labour, T&P etc required for proper completion of the work. | BI01010001010000000000000515BI0100001172 | 40 | Nos |
61 | 61 | Providing and fixing PTMT stop cock of approved quality and colour. , 15 mm nominal bore 86 mm long, weighing not less than 88 gms. | BI01010001010000000000000515BI0100001173 | 20 | Nos |
62 | 62 | Providing and fixing PTMT stop cock of approved quality and colou, 20 mm nominal bore, 89 mm long, weighing not less than 88 gms\n | BI01010001010000000000000515BI0100001174 | 10 | Nos |
63 | 63 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc. Iinternal work - Exposed on wall 15mm dia nominal bore. Including supply of all material, labour, T&P etc required for proper completion of the work. | BI01010001010000000000000515BI0100001175 | 30 | RM |
64 | 64 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc. Iinternal work - Exposed on wall20mm dia nominal bore. Including supply of all material, labour, T&P etc required for proper completion of the work. | BI01010001010000000000000515BI0100001176 | 30 | RM |
65 | 65 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc. Iinternal work - Exposed on wall25mm dia nominal bore.Including supply of all material, labour, T&P etc required for proper completion of the work. | BI01010001010000000000000515BI0100001177 | 40 | RM |
66 | 66 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc. Iinternal work - Exposed on wall 32 mm dia. nominal bore. Including supply of all material, labour, T&P etc required for proper completion of the work. | BI01010001010000000000000515BI0100001178 | 40 | RM |
67 | 67 | Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. (external work) 15 mm dia. nominal bore ..Including supply of all material, labour, T&P etc required for proper completion of the work. | BI01010001010000000000000515BI0100001179 | 50 | RM |
68 | 68 | Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. (external work)20 mm dia. nominal bore..Including supply of all material, labour, T&P etc required for proper completion of the work. | BI01010001010000000000000515BI0100001180 | 30 | RM |
69 | 69 | Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. (external work) 25 mm dia. nominal bore..Including supply of all material, labour, T&P etc required for proper completion of the work. | BI01010001010000000000000515BI0100001181 | 20 | RM |
70 | 70 | Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. (external work) 50 mm dia. nominal bore. .Including supply of all material, labour, T&P etc required for proper completion of the work. | BI01010001010000000000000515BI0100001182 | 20 | RM |
71 | 71 | Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. (external work) 80 mm dia. nominal bore. .Including supply of all material, labour, T&P etc required for proper completion of the work. | BI01010001010000000000000515BI0100001183 | 5 | RM |
72 | 72 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) 20 mm nominal bore . Including supply of all material, labour, T&P etc required for proper completion of the work. | BI01010001010000000000000515BI0100001184 | 1 | Nos |
73 | 73 | Providing and fixing PTMT Ball cock of approved quality, colour and make complete with Epoxy coated aluminium rod with L.P./ H.P.H.D. plastic ball.15 mm nominal bore, 105 mm long, weighing not less than 138 gms | BI01010001010000000000000515BI0100001185 | 40 | NOS |
74 | 74 | Providing and fixing ball valve (brass) of approved quality complete. High or low pressure with plastic floats. 15 mm nominal bore. Including supply of all material, labour, T&P etc required for proper completion of the work. | BI01010001010000000000000515BI0100001186 | 18 | NOS |
75 | 75 | Providing and fixing uplasticised PVC connection pipe with brass unions, 30 cm length. Including supply of all material, labour, T&P etc required for proper completion of the work. | BI01010001010000000000000515BI0100001187 | 40 | NOS |
76 | 76 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C.Semi rigid 32mmdia pipe.Including supply of all material, labour, T&P etc required for proper completion of the work. | BI01010001010000000000000515BI0100001188 | 60 | NOS |
77 | 77 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps,32 White Vitreous China Flat back wash basin size size 630x450 mm each with single 15 mm C.P. brass pillar tap. Including supply of all material, labour, T&P etc required for proper completion of the work. | BI01010001010000000000000515BI0100001189 | 10 | No. |
78 | 78 | Providing and fixing white vitreous china water closet squatting pan (Indian type). Orissa pattern W.C. pan of size 580x440 mm.Including supply of all material, labour, T&P etc required for proper completion of the work. | BI01010001010000000000000515BI0100001190 | 10 | No. |
79 | 79 | Providing and fixing white vitreous china pedestal type (European type/wash down type) water closet pan.(Including supply of all material, labour, T&P etc required for proper completion of the work. | BI01010001010000000000000515BI0100001191 | 2 | Nos. |
80 | 80 | Providing and fixing P.V.C. low level flushing cistern with manually controlled device, 10 litre capacity-coloured. Including supply of all material, labour, T&P etc required for proper completion of the work. | BI01010001010000000000000515BI0100001192 | 20 | Nos. |
81 | 81 | Supply and fixing CP waste jali for steel sink of approved quality complete. Including supply of all material, labour, T&P etc required for proper completion of the work. ( NSI) | BI01010001010000000000000515BI0100001193 | 10 | No. |
82 | 82 | Providing and fixing 100 mm sand cast Iron grating for gully trap.Including supply of all material, labour, T&P etc required for proper completion of the work. | BI01010001010000000000000515BI0100001194 | 2 | No. |
83 | 83 | Providing and fixing trap of self cleansing design with screwed down or hinged. Sand Cast Iron S&S as per IS- 1729 100 mm inlet and 75 mm outlet. Including supply of all material, labour, T&P etc required for proper completion of the work. | BI01010001010000000000000515BI0100001195 | 5 | No. |
84 | 84 | Providing and fixing PTMT towel rail complete with brackets fixed to wooden. 450mm long towel rail with total length of 495mm, 78mm Nos. wide and effective height of 88mm, weighing not less than 170gms. Including supply of all material, labour, T&P etc required for proper completion of the work. | BI01010001010000000000000515BI0100001196 | 5 | Nos. |
85 | 85 | Providing and fixing 600x450 mm bevelled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.Including supply of all material, labour, T&P etc required for proper completion of the work. | BI01010001010000000000000515BI0100001197 | 5 | Nos. |
86 | 86 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes 75 mm diameter.Including supply of all material, labour, T&P etc required for proper completion of the work. | BI01010001010000000000000515BI0100001198 | 50 | RM |
87 | 87 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories 75 mm.Including supply of all material, labour, T&P etc required for proper completion of the work. | BI01010001010000000000000515BI0100001199 | 50 | No. |
88 | 88 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes 110 mm diameter.Including supply of all material, labour, T&P etc required for proper completion of the work. | BI01010001010000000000000515BI0100001200 | 50 | RM |
89 | 89 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories 110 mm.Including supply of all material, labour, T&P etc required for proper completion of the work. | BI01010001010000000000000515BI0100001201 | 20 | No. |
90 | 90 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tankIncluding supply of all material, labour, T&P etc required for proper completion of the work. | BI01010001010000000000000515BI0100001202 | 4500 | Lit. |
91 | 91 | Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturer) of 1stquality conforming to IS :15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4 Coarse sand) including pointing the joints with white cement and matching pigment etc., complete.Including supply of all material, labour, T&P etc required for proper completion of the work. | BI01010001010000000000000515BI0100001203 | 50 | Sqm. |
92 | 92 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption’s less than 0.08% and conforming to IS : 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement: 4 coarse sand) including grouting the joints with white cement and matching pigments etc., complete Size of Tile 60x60 cm. Including supply of all material, labour, T&P etc required for proper completion of the work. | BI01010001010000000000000515BI0100001204 | 50 | Sqm. |
93 | 93 | Finishing walls with textured exterior paint of required shade New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including base coat of water proofing cement paint applied @ 2.20kg/10 sqmIncluding supply of all material, labour, T&P etc required for proper completion of the work. | BI01010001010000000000000515BI0100001205 | 100 | Sqm |
94 | 94 | Finishing walls with textured exterior paint of required shade.Old work ( Two or more coats on existing cement paint surface applied @ 3.28 ltr/10 sqm. Including supply of all material, labour, T&P etc required for proper completion of the work. | BI01010001010000000000000515BI0100001206 | 200 | Sqm |
95 | 95 | Finishing walls with textured exterior paint of required shade. Old work (One or more coats) applied @ 1.82 sq.m ltr/10 sqm.Including supply of all material, labour, T&P etc required for proper completion of the work. | BI01010001010000000000000515BI0100001207 | 100 | Sqm |
96 | 96 | Removal of debris / waste material / rubbish on road side / dismantaled refuses/ park / dust bin and from any other location by full load tractor trolly within the specified colonies as desired by the Engineer-in-charge & safe disposal of the same out side the colony area including cost of all labour T& P etc required for proper loading/unloading and disposal of waste or any other material required for the proper completiom of work. \n | BI01010001010000000000000515BI0100001208 | 24 | Trip |
97 | 97 | Providing and fixing soil, waste and vent pipes: 100mm dia.Sand cast iron S&S pipe as per IS: 1729.(As perIncluding supply of all material, labour, T&P etc required for proper completion of the work. | BI01010001010000000000000515BI0100001209 | 20 | RM |
98 | 98 | Providing and fixing soil, waste and vent pipes: 75mm dia.Sand cast iron S&S pipe as per IS: 1729.(As per Including supply of all material, labour, T&P etc required for proper completion of the work. | BI01010001010000000000000515BI0100001210 | 20 | RM |
99 | 99 | Providing and fixing Stainless Steel AISI 304 (18/8) kitchen sink as per IS 13983. Kitchen sink without drain board, 470x420 mm bowl depth 178 mm.(As per Including supply of all material, labour, T&P etc required for proper completion of the work. | BI01010001010000000000000515BI0100001211 | 5 | No. |
100 | 100 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacture ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete.(Including supply of all material, labour, T&P etc required for proper completion of the work. | BI01010001010000000000000515BI0100001212 | 50 | Sqm |
101 | 101 | Providing and applying 1.2mm thick EPDM (Ethyle Pethyle Desmodor Monomor) water proofing membrane along with surface preparation by mechanical grinder over construction joint/ expansion joint along with applying Ist coat of primer followed by one coat of adhesive for EPDM on the surface and rubber membrane including supply of all material labour T&P etc, also including treatment to expansion/construction joints.Including supply of all material, labour, T&P etc required for proper completion of the work. | BI01010001010000000000000515BI0100001213 | 5 | Sqm |
102 | 102 | Providing and laying APP (Atactic Polypropylene Polymer) modified prefabricated five layer, 3 mm thick water proofing membrane, black finished reinforced with glass fibre matt consisting of a coat of bitumen primer for bitumen membrane @ 0.40 litre/sqm by the same membrane manufactured of density at 25°C, 0.87 - 0.89 kg/litre and viscocity 70 - 160 cps. Over the primer coat the layer of membrane shall be laid using butane torch and sealing all joints etc., and preparing the surface complete. The vital physical and chemical parameters of the membrane shall be as under : Joint strength in longitudinal and transverse direction at 23°C as 350/300 N/5 cm. Tear strength in longitudinal and transverse direction as 60/80N. Softening point of membrane not less than 150°C. Cold flexibility shall be upto -2°C when tested in accordance with ASTM, D - 5147. The laying of membrane shall be got done through the authorised applicator of the manufacturer of membrane :3 mm thick including supply of all material labour T&P etc, also including treatment to expansion/construction joints.Including supply of all material, labour, T&P etc required for proper completion of the work. | BI01010001010000000000000515BI0100001214 | 50 | Sqm |
103 | 103 | Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5 m in width as well as 10 sqm on plan including disposal of excavated earth upto 50 m and lift upto 1.5 m, disposed soil to be levelled and neatly dressed.1 Earth work in excavation in all kinds of soils. (Including supply of all material, labour, T&P etc required for proper completion of the work.\n | BI01010001010000000000000515BI0100001215 | 100 | SQM |
104 | 104 | Providing and fixing aluminium work for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of PVC / neoprene gasket required (Fittings shall be paid for separately).Anodised aluminium (anodised transparent or dyed to required shade according kilogram to IS: 1868, Minimum anodic coating of grade AC 15) Including supply of all material, labour, T&P etc required for proper completion of the work. | BI01010001010000000000000515BI0100001216 | 50 | KG |
105 | 105 | Providing and fixing glazing in aluminium door, window, ventilator shutters and With float glass panes of 4.0 mm thicknessIncluding supply of all material, labour, T&P etc required for proper completion of the work. | BI01010001010000000000000515BI0100001217 | 10 | SQM |
106 | 106 | Providing and fixing double action hydraulic floor spring of approved brand and With stainless steel cover plateIncluding supply of all material, labour, T&P etc required for proper completion of the work. | BI01010001010000000000000515BI0100001218 | 5 | EACH |
107 | 107 | Providing and fixing machine moulded aluminium covering of approved pattern Anodised aluminium sheet 2.5mm thick (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15)(Including supply of all material, labour, T&P etc required for proper completion of the work. | BI01010001010000000000000515BI0100001219 | 2 | KG |
108 | 108 | Providing and fixing aluminium tubular handle bar 32 mm outer dia, 3.0 mm thick Anodized (AC 15 ) aluminium tubular handle bar Including supply of all material, labour, T&P etc required for proper completion of the work. | BI01010001010000000000000515BI0100001220 | 2 | EACH |
109 | 109 | Providing and fixing 100mm brass locks (best make of approved quality) for aluminium doors including necessary cutting and making good etc. complete.(Including supply of all material, labour, T&P etc required for proper completion of the work. | BI01010001010000000000000515BI0100001221 | 3 | EACH |
110 | 110 | Providing and fixing IS : 3564 marked Aluminium die cast body tubular type universal hydraulic door closer with necessary accessories and screws etc.Including supply of all material, labour, T&P etc required for proper completion of the work. | BI01010001010000000000000515BI0100001222 | 5 | NO |
111 | 111 | Providing and fixing aluminium work for doors, windows, ventilators and partitions For fixed portion.Anodised aluminium (anodised transparent or dyed to required shade according kilogram to IS: 1868, Minimum anodic coating of grade AC 15)Including supply of all material, labour, T&P etc required for proper completion of the work. | BI01010001010000000000000515BI0100001223 | 50 | KG |
112 | 112 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption’s less than 0.08% and conforming to IS : 15622 of approved make in all colours and shades, Fixing glazed/ Ceramic/ Vitrified floor tiles with cement based high polymer modified quick-set tile adhesive (Water based) conforming to IS: 15477, in average 3mm thickness.(CPWD-2019 11.41.2-11.42+11.43) | BI01010001010000000000000515BI0100001224 | 50 | Sqm |
113 | 113 | Providing and laying gang saw cut 18 mm thick, mirror polished pre moulded and pre polished machine cut granite stone of required size and shape of approved shade, colour and texture in footpath, flooring cut granite stone of required size and shape of approved shade, colour and texture in footpath, flooring in road side plazas and similar locations, laid over 20mm thick base of cement mortar 1:4 (1cement : 4 coarse sand) including grouting the joints with white cement mixed with matching pigment, epoxy touch ups etc. complete as per direction of Engineer-in-Charge. | BI01010001010000000000000515BI0100001225 | 2 | Sqm |
114 | 114 | Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes,channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts,bolts, fasteners etc.). | BI01010001010000000000000515BI0100001226 | 5 | KG |
115 | 115 | Engaging & operation of one no.Hydraulic excavator cum loader machine (preferably JCB)having capacity 75 BHP with one operator an one helper, including cost of fule lubricants and repair maintenance etc. for removal of slip/landslide/excavation in dry and wet condition, complete in all respect as per direction of I/C. (As per PWD Rate cost VKN Code No.PMC014 including C.P). | BI01010001010000000000000515BI0100001227 | 15 | HRS |
116 | 116 | Providing and supplying Spandrel Glass Panels comprising of 6 mm thick heat strengthened monolithic float glass of approved colour and shade with reflective soft coating on surface # 2 of approved colour and shade so as to match the colour and shade of the IGUs in the vision panels etc. ,all complete for the required performances as specified, as per the Architectural drawings, as per the approved shop drawings, as specified, and as directed by the Engineer- inCharge.“For payment, only the actual area of glass on face # 1 of the glass panels (but excluding the area of grooves and weather silicone sealant) provided and fixed in position, shall be measured in sqm. (Payment for fixing of Spandrel Glass Panels in the curtain glazing is included in cost of relevent Item*). (i) Coloured tinted float glass 6mm thick substrate with reflective soft coating on face # 2, having properties as visible Light transmittance (VLT) of 25 to 35 %, Light reflection internal 10 to 15%, light reflection external 10 to 20 %, shading coefficient (0.25- 0.28) and U value of 3.0 to 3.3 W/m2 K etc. The properties of performance glass shall be decided by technical sanctioning authority as per the site requirement. | BI01010001010000000000000515BI0100001228 | 2 | Sqm |
117 | 117 | Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete, on 20 mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand | BI01010001010000000000000515BI0100001229 | 10 | Sqm |
118 | 118 | Supply and and Instllation of VIST clasic or Equipment Vertical blinds of different colour as approved including all material and T&P etc.required for completion of work( NSI) | BI01010001010000000000000515BI0100001230 | 5 | Sqm |
119 | 119 | S/F single piece WC with UF seat cover hinges fixing accessaries set cisten fitting size 655x665x760,S-Trap -300mm of jaguar make, model LYS-WHT-3885 IS or equuivaalant incluking t&p etc. Required for proper completion of work. | BI01010001010000000000000515BI0100001231 | 1 | Each |
120 | 120 | S/F Bib cock with wall flange of jaguar make model CON-047 KN equuivaalant incluking t&p etc. Required for proper completion of work. | BI01010001010000000000000515BI0100001232 | 1 | Each |
121 | 121 | S/F Central hole wash basin mixer with pop up waste system with 450mm long braided holes of jaguar make model CQT-23169B or equivalent including t&p etc. Required for proper completion of work. | BI01010001010000000000000515BI0100001233 | 1 | Each |
122 | 122 | S/F Toilet paper holder with flap of flap of Jaguar make model AQN-7753 or equivalent including t&p etc. Required for proper completion of work. | BI01010001010000000000000515BI0100001234 | 1 | Each |
123 | 123 | S/F Soap dispensar with glass bottle of Jaguar make model ACN-1135 or equivalent including t&p etc. Required for proper completion of work. | BI01010001010000000000000515BI0100001235 | 1 | Each |
124 | 124 | S/F Soap Dish of Jaguar make model AQN-7731 or equuivaalant incluking t&p etc. Required for proper completion of work. | BI01010001010000000000000515BI0100001236 | 1 | Each |
125 | 125 | Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge.\n | BI01010001010000000000000515BI0100001237 | 5 | Each |
126 | 126 | Providing and laying 60mm thick faciory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved s;ze, design & shape, laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete as per the direction of Engineer-in-charge. | BI01010001010000000000000515BI0100001238 | 20 | Sqm |
127 | 127 | Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete etc. as per | BI01010001010000000000000515BI0100001239 | 20 | Sqm |
128 | 128 | Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc.complete (Newwork) :15 mm nominal bore | BI01010001010000000000000515BI0100001240 | 20 | Each |
129 | 129 | Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc.complete (Newwork) :20 mm nominal bore | BI01010001010000000000000515BI0100001241 | 5 | Each |
130 | 130 | Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc.complete (Newwork) :25 mm nominal bore | BI01010001010000000000000515BI0100001242 | 5 | Each |
131 | 131 | Relaying pitching on slopes laid over prepared filter media as per drawing and technical specifcation Clause 1302 Stone/Boulder(excluding cost of stone).(S.O.R 2019-20)(Effective from 01-May-2019) | BI01010001010000000000000515BI0100001243 | 20 | Cum |
132 | 132 | Cleaning grass, and removel of the rubbish up to adistance of 50 m outside the peripherery of the area cleared. For per 100 sqm area covered Including supply of all material, labour, T&P etc required for proper completion of the work. | BI01010001010000000000000515BI0100001244 | 7407.4 | Sqm |
133 | 133 | Providing and laying of Empty Cement Bags ( Gunny Bags) filled with local sand and tightened using sutli and carriage upto site including preparing subgrade before placing in position, also including supply of all material,labour, T&P etc required for proper completion of the work.Including supply of all material, labour, T&P etc required for proper completion of the work. | BI01010001010000000000000515BI0100001245 | 1480 | Sqm |
134 | 134 | Providing and laying of wire crates 3.00x1.50x1.50 in size with a 10 gauge BWG GI wire conforming to IS: 280 & IS:4826 in 150mm x 150mm mesh laid with stone oulders weighing not less than 25 kg each.(As per PWD Uttarakhand pecification) GI wire 10 gauge BWGIncluding supply of all material, labour, T&P etc required for proper completion of the work. | BI01010001010000000000000515BI0100001246 | 13.5 | Cum |
135 | 135 | Slip clearance (by manual means) of earth and boulders including disposal as directed by the Engineer-in-chargeIncluding supply of all material, labour, T&P etc required for proper completion of the work. | BI01010001010000000000000515BI0100001247 | 11.96 | Cum |
136 | 136 | H.P stone filling in back of wallls including cost of all materials ,royality.t&p etc. complete.Including supply of all material, labour, T&P etc required for proper completion of the work. | BI01010001010000000000000515BI0100001248 | 7.91 | Cum |
137 | 137 | Dewatering from foundation of abutments and wing walls including wages of operator and fuel including supply of all material, labour and T&P etc. required for proper completion of the work.Including supply of all material, labour, T&P etc required for proper completion of the work. | BI01010001010000000000000515BI0100001249 | 5 | HR |
138 | 138 | Repair of RCC Railing(Carrying out repair of RCC M30 railing to bring it to the original shape.)Including supply of all material, labour, T&P etc required for proper completion of the work. | BI01010001010000000000000515BI0100001250 | 5 | Rmt. |
139 | 139 | WBM Grading 1 Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with three wheel 80-100 kN static roller in stages to proper grade and camber, applying and brooming, stone screening/binding materials to fill-up the interstices of coarse aggregate, watering and compacting to the required density Grading 1 as per Technical Specification Clause 404. By mechanical means | BI01010001010000000000000515BI0100001251 | 10 | Cum |
140 | 140 | Dewatering of water caused due to seepage of ground water and surface water due to rain etc. excluding excavation of foundation but during execution of civil works including supply of all machine operator, khalashi, POL, T&P, accessories required for proper completion of the work. | BI01010001010000000000000515BI0100001252 | 5 | HP/Rr. |
141 | 141 | Dismantling stone pitching/ dry stone spalls Including supply of all material, labour, T&P etc required for proper completion of the work. | BI01010001010000000000000515BI0100001253 | 4.5 | Cum |
142 | 142 | Providing and laying Pitching on slopes laid over prepared filter media including boulder apron laid dry in front of toe of embankment complete as per drawing and Technical specifications | BI01010001010000000000000515BI0100001254 | 4.5 | Cum |
143 | 143 | Providing and laying Filter material underneath pitching in slopes complete as per drawing and Technical specification Including supply of all material, labour, T&P etc required for proper completion of the work. | BI01010001010000000000000515BI0100001255 | 2.25 | Cum |
144 | 144 | Geotextile Filter (Laying of a geotextile filter between pitching and embankment slopes on which pitching is laid to prevent escape of the embankment material through the voids of the stone pitching/cement concrete blocks as well as to allow free movement of water without creating any uplift head on the pitching.)Including supply of all material, labour, T&P etc required for proper completion of the work. | BI01010001010000000000000515BI0100001256 | 15 | Sqm |
145 | 145 | Providing and laying bituminous macadam using crushed stone aggregates of specified grading premixed with bituminous binder, transported to site by tippers, laid over a previously prepared surface with paver finisher equiped with electronic sensor to the required grade, level and alignment and rolling with smooth wheeled, vibratory and tandem rollers as per specifications to achieve the desired compaction and density, complete as per specificatons and directions of Engineerin-Charge. | BI01010001010000000000000515BI0100001257 | 0.6 | Cum |
146 | 146 | Providing and laying bitumen mastic wearing course (as per specifications) with industrial bitumen of grade 85/25 conforming to IS : 702, prepared by using mastic cooker and laid to required level and slope, including providing antiskid surface with bitumen precoated fine grained hard stone chipping of approved size at the rate of 0.005 cum per 10 sqm and at approximate spacing of 10 cm centre to centre in both directions, pressed into surface protruding 1 mm to 4 mm over mastic surface, including cleaning the surface, removal of debris etc. all complete. (Considering bitumen using 10.2% as per MORTH specification). 16.37.1 25 mm thick\n | BI01010001010000000000000515BI0100001258 | 12 | Sqm |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail