Military Engineer Services-MES has published Repair To Roof , Al Joinary , False Ceiling And Connected Items To Certain Bldgs Of Zone A And B At Dhana Mil Station. Submission Date for this Tender is 27-10-2020. Civil Work Tenders in AGE I DHANA Madhya Pradesh. Bidders can get complete Tender details and download the document.
| Name of Work: REPAIR TO ROOFING AL JOINARY, FALSE CEILING & CONNECTED ITEMS TO CERTAIN BLDGS OF ZONE 'A' & 'B' AT DHANA MIL STATION. | |||||
|---|---|---|---|---|---|
| Sl. No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Dismantling of asbestos cement sheet (corrugated or semi corrugated) in roofing including ridges etc, complete all as specified & directed. | 210 | Sqm | |
| 2 | 2 | Material and labour for 6mm thick asbestos cement corrugated or semi corrugated sheet in roofs walls etc fixed with 'L' or 'J' type hook bolt, complete all as specified & directed. | 70 | Sqm | |
| 3 | 3 | Material and labour for asbestos cement two piece adjustable serrated ridge corrugated or semi corrugated sheets fixed with 'L' or ‘J’ type hooks & bolts, complete all as specified & directed. | 10 | RM | |
| 4 | 4 | Supply & Fixing Pre- painted galvalume aluminum zinc coating GI based Mangalore pattern steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws etc, complete all as specified directed by Engr-in-Charge. | 70 | Sqm | |
| 5 | 5 | Supply & Fixing Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified directed by Engr - in - Charge. | 70 | Sqm | |
| 6 | 6 | Dismantling timber scantlings 40 Sqcm and over in section, in any position framed / unframed works as in purlin or rafter truss etc, complete all as specified & directed. | 1.2 | Cum | |
| 7 | 7 | Supply and fixing mild steel tubes, angles round pipes etc fixed independently without connecting plates as in purlins, rafter or in truss etc, complete all as specified & directed. | 250 | Kg | |
| 8 | 8 | Material and labour for preparing new steel surfaces and applying two coats of synthetic enamel paint over a coat of red oxide primer on surfaces over 10cm width or girth complete all as specified & directed. | 45 | Sqm | |
| 9 | 9 | Demolition of cement concrete (un-reinforced) of any description and in any position not otherwise specifically provided complete all as specified and directed. | 0.65 | Cum | |
| 10 | 10 | Material and labour for cement concrete type B-1, 1:2:4 (20 mm graded stone aggregate) in coping, edging, concrete bed to hold fast and filling etc including necessary form work, complete all as specified and directed. | 0.65 | Cum | |
| 11 | 11 | Taking down cement or cement lime plaster of any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water , etc. complete all as specified & directed. | 120 | Sqm | |
| 12 | 12 | Material and labour for 10mm thick rendering in cement mortar 1:4 on fair faces of brick work or concrete surfaces using integral water proofing compound 3% by weight of cement and finishing the surface even and smooth without using extra cement complete all as specified & directed. Note:- WPC shall be measured and paid separately. | 60 | Sqm | |
| 13 | 13 | Supply only integral water proofing compound, complete all as specified & directed. | 7.67 | Kg | |
| 14 | 14 | Material & Labour for applying two coats of Oil bound distemper over a coat of putty 1.5mm thick layer average on new wall surface etc, complete all as specified and directed. | 60 | Sqm | |
| 15 | 15 | Material and labour for rendering 10 mm thick in CM (1:6) on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed. | 60 | Sqm | |
| 16 | 16 | Taking down wooden chowkhat or frame area exc 1.5 Sqm and not exc 4 sqm each with shutter (without taking off shutter from frame) complete all as specified & directed. | 12 | Each | |
| 17 | 17 | All as per item No 16.00 above but area not exc 1.5 sqm each, complete all as specified & directed. | 20 | Each | |
| 18 | 18 | Supply and fixing powder coated anodised aluminium frame minimum thickness 1.50mm thick for doors, windows, ventilators with one or more rebates, grill including jointing cleat for fixing etc. complete all as specified and directed. Note :- Minimum thickness of powder coating 50 micron. | 150 | Kg | |
| 19 | 19 | Supply and fixing aluminium anodised powder coated door shutters of aluminium section minimum thickness 1.50mm thick including necessary jointing cleats, glazing clips, ruber neoprene packing, aluminium anodised powder coated fittings such as handle 2 Nos in each door, 100mm hinge 3 Nos in each door, 200mm tower bolt 2 Nos in each door, mortice lock including keys 1 set, anodised aluminium snap beading & screws complete all as specified and directed. Note :- Minimum thickness of powder coating 50 micron | 24 | Sqm | |
| 20 | 20 | Supply and fixing aluminium anodised powder coated window shutters side hung type or two track sliding type with or without sash bars of aluminium section minimum thickness 1.50mm thick including necessary jointing cleats, glazing clips, ruber neoprene packing, anodised aluminium snap beading, screws including powder coated anodised aluminium fittings such as peg stay 150mm long (1 no ), hinge type B-21 100mm long (2 nos) suitable handle (2 no) tower bolt (2 nos) etc complete all as specified & directed. | 22.5 | Sqm | |
| 21 | 21 | Supply and fixing aluminium anodised powder coated window shutters side hung type or three track sliding type with or without sash bars of aluminium section minimum thickness 1.50mm thick including necessary jointing cleats, glazing clips, ruber neoprene packing, anodised aluminium snap beading, screws including powder coated anodised aluminium fittings such as peg stay 150mm long (1 no ), hinge type B-21 100mm long (2 nos) suitable handle (2 no) tower bolt (2 nos) etc complete all as specified & directed. | 22.5 | Sqm | |
| 22 | 22 | Supply and fixing aluminium anodised grill of aluminium section over 50 mm Pitch including necessary jointing cleats, glazing clips, ruber neoprene packing, anodised aluminium snap beading, screws complete all as specified and directed. | 22.5 | Sqm | |
| 23 | 23 | Supply and fixing stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, complete all as specified & directed. | 22.5 | Sqm | |
| 24 | 24 | Supply and fixing tinted / coloured floated glass ordinary quality & glazing with wooden/ aluminium bead/oil putty in Square n.exc 0.5 Sqm in Each panel 5 mm thick, complete all as per specified and directed. Make:- Modiguard/ Saintgobin / Hariyana glass | 22.5 | Sqm | |
| 25 | 25 | Material & Labour for Double action Floor Spring Hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other part made of mild steel heavy duty and fixed, complete all as specified and directed. | 12 | Each | |
| 26 | 26 | Supply and fixing in repair aluminium (die cast) body door closer hydraulically regulated designation No.3, universal type, suitable for door shutters of 851 to 1000mm in width and weight of shutter between 61 to 80 kg and fixed complete all as specified and directed. | 5 | Each | |
| 27 | 27 | Material and labour for 15 to 20mm thick granite machine cut bedded and jointed with grey cement slurry and pointed with white cement and pigment to match the shade of granite including grinding and polishing in cooking platform, window/ door cills etc complete over and including screed bed or bedding layer of mortar 15 mm thick for laying floor finishes with CM 1:6, complete all as specified & directed. | 15 | Sqm | |
| 28 | 28 | Rounding to edges of stone slab on edge such as in steps, cooking platform and other similar situation in new or old granite stone slab / Kota stone slab complete all as specified and directed. | 100 | RM | |
| 29 | 29 | Dismantling of wall and ceiling boards (fiber, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including snap grid frame work complete all as specified and directed. | 300 | Sqm | |
| 30 | 30 | Supply and fixing in position suspended false ceiling using GI exposed ceiling suspension system of grid size 600mm x 600mm with main runner 38x24mm (0.25mm thick) cross tee 27mm x 24mm (0.25mm Thick) angle, 22mm x 24mm (0.4mm Thick) grid of GI system duly suspended with 4 mm dia galvanised iron /mild steel bar hanger fixed with steel dash fastener or iron purlins from the roof with adjustment clip. The main runner to be secured to structural soffit by hanger @ 1200mm maximum c/c. The last hanger at the end of each main runner should not be placed at more than 450mm from the adjacent wall. Flush fitting 1200mm cross tee to be interlocked between main runner @600mm C/C, so as to firm 600mm x 600mm grid etc, complete all as specified and directed. | 300 | Sqm | |
| 31 | 31 | Supply and fixing 4mm thick (high pressure stream cured) pre-painted self-embossed, reinforced designer cement board (Ivory) with texture of size 595 x 595mm including conforming to IS 14862-2000 to be placed in a grid etc, complete all specified and directed. | 200 | Sqm | |
| 32 | 32 | Supply and fixing 4mm thick (high pressure stream cured) p12019Non asbestos fibre cement building boards of size 595 x 595mm including conforming to IS 14862-2000 to be placed in a grid etc, complete all specified and directed. | 100 | Sqm | |
| 33 | 33 | Roughening surfaces of old concrete surfaces or demolition/Taking down existing Roof treatment by picking sweeping, cleaning and washing down with water to remove dust etc including taking down tarfelt and brushing neat cement slurry @ 3 Kg/Sqm including 20mm thick screeding in CM (1:4) finished even and smooth mixed with water proofing compound, complete all as specified and directed. (Note:- WPC shall be measured and paid separately) | 320 | Sqm | |
| 34 | 34 | Applying bituminous primer on roof surfaces conforming to IS-3384 of 1986 @ 0.30 ltr/Sqm and applying APP based polymeric membrane minimum weighing 3.5 kg/sqm and minimum 3mm thick reinforced with non -woven polyester matt laid on primed surface by forced application complete all as specified with overlap of 10 cms (overlaps to be thermo fused by flame) all as specified. | 320 | Sqm | |
| 35 | 35 | Plain cement concrete padding 1:2:4 type B-0 of uniform thickness 50mm in two layer with chicken wire mesh in between the layers, top surface of plain cement concrete padding shall be furnished even and smooth w/o using extra cement, all as specified. (Note:- wire netting shall be measured and paid separately) | 120 | Sqm | |
| 36 | 36 | Supply only wire netting of galvanised steel wire 0.91 mm dia fixed with tinned tacks of wire staples and size of mesh 12mmx12mm complete all as specified. | 120 | Sqm | |
| 37 | 37 | Material and labour for cement concrete 1:2:4 type B-1 as in mass-concrete etc, complete all as specified and directed. | 5.1 | Cum | |
| 38 | 38 | Material and labour for one coat of aluminium paint at the rate of 100 gm/Sqm as per manufacturer's instructions over bituminous layer, complete all as specified & directed at site. | 200 | Sqm | |
| 39 | 39 | Demolition of plain cement concrete (un-reinforced) of any description and in any position not otherwise specifically provided, complete all as specified and directed. | 3.8 | Cum | |
| 40 | 40 | Material and labour for cement concrete 1:2:4 type B1 (using 20 mm graded stone aggregate) in copping, edging etc including necessary form work, complete all as specified and directed. | 1.8 | Cum | |
| 41 | 41 | Material and labour for PCC (1:2:4) type B1 using 20 mm graded aggregate as in roof kerb, PCC padding repairs, mud stop etc. complete all as specified and directed. | 2 | Cum | |
| 42 | 42 | Disconnecting existing water tank of capacity n exc 500 litres ltrs, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting including replacing check nuts and refixing in position after cleaning and removing all scale and dirt etc from tank and from mouths of circulating pipes etc. complete all as specified and directed. | 10 | Each | |
| 43 | 43 | Disconnecting existing water tank of capacity exc 500 and n. exc. 1000 litres ltrs, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and including replacing check nuts and refixing in position after cleaning and removing all scale and dirt, etc from tank and from mouths of circulating pipes etc. complete all as specified and directed. | 5 | Each | |
| 44 | 44 | Dismentling of PVC water tank of exc 250ltrs and n.exc 500ltrs capacity and removing outside MD land, complete all as specified and directed. | 10 | Each | |
| 45 | 45 | Dismantling of PVC water tank of exc 500ltrs and n.exc 1000ltrs capacity and removing outside MD land , complete all as specified and directed. | 5 | Each | |
| 46 | 46 | Supply and fixing 500 Ltrs double layered Rotational moulded polyethylene water storage tanks white color (cylindrical vertical with closed top using PVC cover) hoisted and fixed in position all as specified in SSR Part I, complete all as specified and directed. | 10 | Each | |
| 47 | 47 | Supply and fixing 1000 Ltrs double layered Rotational moulded polyethylene water storage tanks white color (cylindrical vertical with closed top using PVC cover) hoisted and fixed in position all as specified in SSR Part I, complete all as specified and directed. | 5 | Each | |
| 48 | 48 | Supply and fixing 15mm dia float valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed. complete all as specified and directed. | 15 | Each | |
| 49 | 49 | Taking up or down 20mm bore steel tubing and connections, including cleaning for refixing or removal out side MD land all as directed by Engr-in-Charge. | 50 | RM | |
| 50 | 50 | Supply and fixing 20mm bore galvanised mild steel tubing medium grade with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and directed. | 50 | RM | |
| 51 | 51 | Demolition and breaking of drains pipe (salt glazed stone were, AC, RCC or PVC pipe) set in cement mortar 100 mm internal dia pipe. complete all as specified and directed. | 200 | RM | |
| 52 | 52 | Supply and fixing 110 mm bore PVC (SWR) pipe single socketed in any length with rubber ring joints fixed to walls, complete all as specified and directed. | 150 | RM | |
| 53 | 53 | Supply and fixing 75 mm bore PVC (SWR) pipe single socketed in any length with rubber ring joints fixed to walls, complete all as specified and directed. | 50 | RM | |
| 54 | 54 | Supply and fixing 110 mm bore PVC (SWR) bends any radius, complete all as specified and directed. | 30 | Each | |
| 55 | 55 | Supply and fixing 75 mm bore PVC (SWR) junction Single Tee equal or unequal, complete all as specified and directed. | 10 | Each | |
| 56 | 56 | Supply and fixing 110 mm bore PVC (SWR) junction Single Tee equal or unequal, complete all as specified and directed. | 10 | Each | |
| 57 | 57 | Supply and fixing 110 mm bore PVC (SWR) bends any radius, complete all as specified and directed. | 10 | Each | |
| 58 | 58 | NOTE :- SCHEDULE OF CREDIT (Amount shall be deducted offline from the total quoted amount to workout the net contract sum to be considered for acceptance.) [(-) Rs 35400.00 /- ] |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
