Supply Of , Traction Transformer Complete With Cooling System & Accessories Like H.T Cable Along With Protection Shield In Passenger Compartment And Under Frame Area, Thermostat Etc. Related Protection Equipment And With Safety Chain Arrangement Including Termination Crimping Lugs, Cable Markers With Heat Shrinkable Sleeves For Power And Control Cables, Equipment Mounting And Earthing Hardware And Accessories Including Oil Pump,Oil Cooling Blowers Etc. (One Set Per Basic Unit), Gapless Lightning Arrestors As Per Clause 4.2 Of Rdso Specification (One Set Per Basic Unit)., Igbt Based Pwm Power Converter Inverter Complete With Dc Link With 100 Hz Resonance Filter And /Or Any Other Equipment Necessary To Reduce The Effect Of Other Harmonics On S&T Equipment, Pre-Charging Resistor, Braking Resistor And Associated Power/Control Contactors, Power & Control Cables, Cooling System With Accessories Such As Equipment Anchoring Arrangement To Coach Body & Ht Compartment Interlock System Including Termination Crimping Lugs, Cable Markers With Heat Shrinkable Sleeves For Power And Control Cables, Equipment Mounting And Earthing Hardware And Accessories Including Brake Control Electronics Complete System Fulfilling The Brake Blending Requirements Including Wheel Slip/Slide Protection And Anti Skid Controls As Per Clause 4.12 (4.12.1 To 4.12.7) Of Rdso Specification And Auxilary Machines As Required (One Set Per Motor Coach)., Asynchronous Axle Hung Nose Suspended Traction Motors With Roller Bearing Suspension Compatible With Pinion, Gear, Gear Case, Nose Suspension Block And All Associated Hardware, Air Bellows/Air Filters And Speed/Temperature Sensor Including Termination Crimping Lugs, Cable Markers With Heat Shrinkable Sleeves For Power And Control Cables, Equipment Mounting And Earthing Hardware And Accessories., Microprocessor Based Tcms/Multiplexing System/Equipment For Inter Coach Data Transmission And Controls And Other Accessories Including Fault Diagnosis And Display System In The Driving Cab, Multiplexing Cables And Connectors In Assembled Form And Prewired Modular Type Panels Wherever Required (One Set Per Rake)., Auxiliary Converter, Igbt Based, Complete With Cooling System And Accessories For Supply To Auxiliary Machines Including Motor Compressor Set, Battery Charging, Lighting And Ventilation Of 4 Car Unit And Lighting/ Ventilation Of Adjacent 4 Car Unit In Case Of Extended Auxiliary Load Including Termination Crimping Lugs, Cable Markers With Heat Shrinkable Sleeves For Power And Control Cables, With Accessories Such As Equipment Anchoring Arrangement To Coach Body, Equipment Mounting And Earthing Hardware And Accessories Including Auxiliary Machines As Required (One Set Per Basic Unit)., Pneumatic System Comprising Of Main Air Compressor (Splash Lubricated/Oil Free) Along With Mounting Frame Assembled With 3 Phase Induction Motor, Filters, And Pressure Switches, Control & Air Dryer, Filters Etc., As Per Clause 4.14.17 Of Rdso Specification. The Bidder Should Indicate The Type Of Compressor Offered In This Bid. (One Set Per Rake), Vacuum Circuit Breaker (Ac) With Earthing Switch And Ht Door Interlocks (One Set Per Basic Unit)., Pantograph Complete Suitable For Ac Application With Mounting Insulators And Necessary Control Valves And Isolating Cocks Including Interconnecting Bus Bars And Associated Hardware For Roof Equipment (One Set Per Basic Unit)., All Control, Power, Data And Communication Cables Including Wiring Of Lights, Fans And Papis Along With Terminal Equipment For Proper Working Of Entire System And All Accessories. Cables Shall Be Supplied As Harness, Duly Cut To Size, Marked, Connectorised/Crimped Along With Protective Accessories For Protection Against Abrasion And Grouped According To Area Of Use. Please Refer Clause 4.17.2 (Xiii) Of Rdso Specification In This Regard (One Set Per Rake)., Complete Pre-Fabricated Drivers Desk And Cab Equipment. The Cab Shall Include All The Cab Equipments E.G. Combined Master-Cum-Brake Controller, Instrument Panel With Back-Lit Instruments, Gauges For Pneumatic Indications, Control Panels, Drivers Diagnostic Display Unit & Drivers Log In Device, Etc., Ergonomically Designed Driver Desk/Console, Pre-Wired And Terminated On A Terminal Board And Multi-Pin Plugs/Sockets For Inter- Equipment Connections. Cab-Equipment Shall Also Include Pneumatic Horns, Electric Motor Driven Wind Screen Wipers,Sunscreens, Head Light,Flasher Light,Marker Cum Tail Light, Safety Related Equipments Like Bell Code System., All The Above Equipment Shall Include Termination Crimping Lugs, Cable Markers With Heat Shrinkable Sleeves For Power And Control Cables, Equipment Mounting And Earthing Hardware And Accessories (One Set Per Dmc)., Led Lights Including Emergency Lights And Ac Fans For Passenger Area (450 Mm Sweep) And Bldc Fans (400 Mm Sweep) For Drivers Cab& Ht And Lt Compartments,Alarm Mechanism Having Push Button And Led Indication With Transparent Polycarbonate Enclosure & External Led Indicator ( Pail-Passenger Alarm Indication Light) With Release Push Button With Ss Enclosure On Either Side Of The Coach And Modular Type Switches For Fans, Including Mounting Hardware And Accessories (One Set Per Rake)., Tower/Roof Mounted Cab Air-Conditioning Unit (2.0Tr Min) With Control Panel Along With Mounting Frame And Anchoring Arrangement To Coach Body And All The Accessories/Hardware Generally Conforming To Icf Specification No. Icf/Elec/110, Cs-1& 2 Or Rdso Specification No. Rdso/2007/El/Spec/0055 (Rev-1). However Roof Mounted Cab Ac Shall Be Preferred (One Set Per Dmc)., Set Of Mcbs, Contactors, Relays Etc. For Propulsion System, Control, Auxiliary Etc. In Prewired And Assembled Condition With Modular Type Panels Including Termination Crimping Lugs, Cable Markers With Heat Shrinkable Sleeves For Power And Control Cables, Equipment Mounting And Earthing Hardware And Accessories (One Set Per Basic Unit)., Parking Brake Equipment Complete With Control, Associated Valves & Wiring Etc. As Per Clause 4.12.8 Of Rdso Specification (One Set Per Rake)., Load Weighing Sensors With Adequate Redundancies As Per Clause 4.12.10 Of Rdso Specification (One Set Per Rake)., Passenger Information Comprising Single Front Led Destination Board In Dmcs (Head Code) And Communication System Including 02 Nos. Of Double Side Display Units And 02 Nos. Single Side Display Units Per Coach For Passenger Area,Loud Speakers, Gps Antenna Etc., As Per Clause No. 4.6.2 Of Rdso Specification Including Termination Crimping Lugs, Cable Markers With Heat Shrinkable Sleeves For Power And Control Cables, Equipment Mounting And Earthing Hardware And Accessories (One Set Per Rake)., Inter Vehicular Coupler Assembly Complete With Connectors As Per Clause No. 4.17.4 Of Rdso Specification Including Termination Crimping Lugs, Cable Markers With Heat Shrinkable Sleeves And Mounting & Earthing Hardware And Other Associated Accessories (One Set Per Rake)., Speed Indicating Cum Recording System As Per Clause No. 4.9.4 Of Rdso Specification (One Set Per Dmc)., Set Of Potential Transformer & Current Transformer As Per Clause No. 4.1.8 Of Rdso Specification (One Set Per Basic Unit)., Provision Of Networking System Including Cctv Cameras In All Coaches, Nvrs, Outer Vehicle Front Camera And Rear View Cameras In Dmc Coaches, Display In The Driving Cabs, Gps Antenna Etc., Generally Conforming To Icf Specification No.Icf/Elec/166(Rev.00) (One Set Per Rake)., Cable Transit System With Epdm Rubber Modules As Per Clause No. 4.17.2 (Xii) Of Rdso Specification And Conforming To Rdso/2008/El/Spec/0067 (Rev 2) Of January 2015 For Cable Entry From Underframe /Above Roof/End Wall To Passenger Compartment, Drivers Cab, Ht /Lt Compartment Etc., (One Set Per Rake)., Auxiliary Compressor With Mounting Frame, Anti-Vibration Mountings, Mounting Hardware And Accessories Etc.As Per Clause 4.14.14 Of Rdso Specification (One Set Per Basic Unit)., Design And Supply Of Trays For Laying Of Harnessed Cables Including Its Accessories As Per Clause 4.17.2 (Xiii) Of Rdso Specification (One Set Per Rake)., Set Of Ht Room Filters (One Set Per Dmc), Instrumentation Required For Commissioning And Field Testing Of The Equipment (May Be Taken By The Supplier After Completion Of The Commissioning And Field Testing Activities) (One Set Per Rake)., Supervision Of Installation As Per 18.3 And Commissioning As Per Item No. 18.4 Of Scc (One Set Per Rake)., Training Of Ir Personnel As Per Clause 18.7 At Suppliers Premises, Training Of Ir Personnel As Per Clause 18.7 At Icf/Other Railway Works, Laptops With Necessary Interfacing Equipment For Diagnostics., Special Tools For Assembly/Disassembly Of Traction Motor Including Equipment For Extraction Of Pinion & Bearings., Testing Kit For Traction Motor (Vvvf Control Test), Lifting Frames And Special Fixtures For Equipment Viz., Traction/Auxiliary Converter & Transformer., Traction Transformer Complete With Cooling System & Accessories Like H.T Cable Along With Protection Shield In Passenger Compartment And Under Frame Area, Thermostat Etc. Related Protection Equipment And With Safety Chain Arrangement Including Termination Crimping Lugs, Cable Markers With Heat Shrinkable Sleeves For Power And Control Cables, Equipment Mounting And Earthing Hardware And Accessories Including Oil Pump,Oil Cooling Blowers Etc. (One Set Per Basic Unit), Igbt Based Pwm Power Converter Inverter Complete With Dc Link With 100 Hz Resonance Filter And /Or Any Other Equipment Necessary To Reduce The Effect Of Other Harmonics On S&T Equipment, Pre-Charging Resistor, Braking Resistor And Associated Power/Control Contactors, Power & Control Cables, Cooling System With Accessories Such As Equipment Anchoring Arrangement To Coach Body & Ht Compartment Interlock System Including Termination Crimping Lugs, Cable Markers With Heat Shrinkable Sleeves For Power And Control Cables, Equipment Mounting And Earthing Hardware And Accessories Including Brake Control Electronics Complete System Fulfilling The Brake Blending Requirements Including Wheel Slip/Slide Protection And Anti Skid Controls As Per Clause 4.12 (4.12.1 To 4.12.7) Of Rdso Specification And Auxilary Machines As Required (One Set Per Motor Coach)., Auxiliary Converter, Igbt Based, Complete With Cooling System And Accessories For Supply To Auxiliary Machines Including Motor Compressor Set, Battery Charging, Lighting And Ventilation Of 4 Car Unit And Lighting/ Ventilation Of Adjacent 4 Car Unit In Case Of Extended Auxiliary Load Including Termination Crimping Lugs, Cable Markers With Heat Shrinkable Sleeves For Power And Control Cables, With Accessories Such As Equipment Anchoring Arrangement To Coach Body, Equipment Mounting And Earthing Hardware And Accessories Including Auxiliary Machines As Required (One Set Per Basic Unit)., Asynchronous Axle Hung Nose Suspended Traction Motors With Roller Bearing Suspension Compatible With Pinion, Gear, Gear Case, Nose Suspension Block And All Associated Hardware, Air Bellows/Air Filters And Speed/Temperature Sensor Including Termination Crimping Lugs, Cable Markers With Heat Shrinkable Sleeves For Power And Control Cables, Equipment Mounting And Earthing Hardware And Accessories., Combined Master & Brake Controller With Accessories (One Set Per Dmc)., Set Of Brake Equipment Including Electronic Cards Etc. & Parking Brake Equipment: A) Becu B) Brake Blending Equipment C) Parking Brake, Main Compressor (Splash Lubricated/Oil Free) With Three Phase Induction Motor Including Pressure Switches, Controls & Air Dryer Etc., As Per Clause 4.14.17 Of Rdso Specification. Offered Type Of Compressor Shall Be Supplied (One Set Per Dmc)., Set Of Mcbs, Contactors, Relays Etc. For Propulsion System, Control, Auxiliary Etc. In Prewired And Assembled Condition With Modular Type Panels Including Termination Crimping Lugs, Cable Markers With Heat Shrinkable Sleeves For Power And Control Cables, Equipment Mounting And Earthing Hardware And Accessories (One Set Per Basic Unit), Gapless Lightning Arrestors As Per Clause 4.2 Of Rdso Specification (One Set Per Basic Unit), Vacuum Circuit Breaker (Ac) With Earthing Switch And Ht Door Interlocks (One Set Per Basic Unit)., Gapless Lightning Arrestors As Per Clause 4.2 Of Rdso Specification. (One Set Per Basic Unit), Pantograph Complete Suitable For Ac Application With Mounting Insulators And Necessary Control Valves And Isolating Cocks Including Interconnecting Bus Bars And Associated Hardware For Roof Equipment (One Set Per Basic Unit)., Led Based Light Fittings Including Passenger Compartment Light Fittings, Head Lights, Flasher Lights &Tail Lamp With Control Unit And Marker Light& Fans (One Set Per Dmc)., Tower/Roof Mounted Cab Air-Conditioning Unit (2.0Tr Min) With Control Panel Along With Mounting Frame And Anchoring Arrangement To Coach Body And All The Accessories/Hardware Generally Conforming To Icf Specification No. Icf/Elec/110, Cs-1& 2 Or Rdso Specification No. Rdso/2007/El/Spec/0055 (Rev-1). However Roof Mounted Cab Ac Shall Be Preferred (One Set Per Dmc)., Set Of Coach Display Units (2 Nos. Of Double Side And 2 Nos. Of Single Side) Along With Head Code (One Set Per Dmc)., Cctv With Nvr (One Set Per Tc), Set Of Ht Room Filters (One Set Per Dmc), Traction Transformer Complete With Cooling System & Accessories Like H.T Cable Along With Protection Shield In Passenger Compartment If Required, Thermostat Etc. Related Protection Equipment And With Safety Chain Arrangement Including Termination Crimping Lugs, Cable Markers With Heat Shrinkable Sleeves For Power And Control Cables, Equipment Mounting And Earthing Hardware And Accessories. Including Oil Pump, Oil Cooling Blowers Etc. (One Set Per Basic Unit), Igbt Based Pwm Power Converter Inverter Complete With Dc Link With 100 Hz Resonance Filter And /Or Any Other Equipment Necessary To Reduce The Effect Of Other Harmonics On S&T Equipment, Pre-Charging Resistor, Braking Resistor And Associated Power/Control Contactors, Filters Required For Harmonic Suppression, Microprocessor Based Controls, Power & Control Cables Including Cooling System With Accessories Such As Equipment Anchoring Arrangement To Coach Body & Ht Compartment Interlock System Including Termination Crimping Lugs, Cable Markers With Heat Shrinkable Sleeves For Power And Control Cables, Equipment Mounting And Earthing Hardware And Accessories Including Brake Control Electronics Complete System Fulfilling The Brake Blending Requirements Including Wheel Slip/Slide Protection And Anti Skid Controls As Per Clause 4.12 (4.12.1 To 4.12.7) Of Rdso Specification And Auxiliary Machines As Required. (One Set Per Motor Coach), Asynchronous Axle Hung Nose Suspended Traction Motors With Roller Bearing Suspension Compatible With Pinion, Gear, Gear Case, Nose Suspension Block And All Associated Hardware, Air Bellows/Air Filters And Speed/Temperature Sensor Including Termination Crimping Lugs, Cable Markers With Heat Shrinkable Sleeves For Power And Control Cables, Equipment Mounting And Earthing Hardware And Accessories., Microprocessor Based Tcms/Multiplexing System/Equipment For Inter Coach Data Transmission And Controls And Other Accessories Including Fault Diagnosis And Display System In The Driving Cab, Multiplexing Cables And Connectors In Assembled Form And Prewired Modular Type Panels Wherever Required. (One Set Per Rake), Auxiliary Converter, Igbt Based, Complete With Cooling System And Accessories For Supply To Auxiliary Machines Including Motor Compressor Set, Battery Charging, Lighting And Ventilation Of 3 Car Unit And Lighting/ Ventilation Of Adjacent 3 Car Unit In Case Of Extended Auxiliary Load Including Termination Crimping Lugs, Cable Markers With Heat Shrinkable Sleeves For Power And Control Cables, With Accessories Such As Equipment Anchoring Arrangement To Coach Body , Equipment Mounting And Earthing Hardware And Accessories Including Auxiliary Machines As Required. (One Set Per Basic Unit), Pneumatic System Comprising Of Main Air Compressor(Splash Lubricated/Oil Free) Along With Mounting Frame Assembled With 3 Phase Induction Motor, Filters, And Pressure Switches, Control & Air Dryer, Filters Etc.,As Per Clause 4.14.17 Of Rdso Specification. The Bidder Should Indicate The Type Of Compressor Offered In This Bid. (One Set Per Rake), Vacuum Circuit Breaker (Ac) With Earthing Switch And Ht Door Interlocks. (One Set Per Basic Unit), Pantograph Complete Suitable For Ac Application With Mounting Insulators And Necessary Control Valves And Isolating Cocks Including Interconnecting Bus Bars And Associated Hardware For Roof Equipment. (One Set Per Basic Unit), All Control, Power, Data And Communication Cables Including Wiring Of Lights, Fans And Papis Along With Terminal Equipment For Proper Working Of Entire System And All Accessories. Cables Shall Be Supplied As Harness Duly Cut To Size, Marked, Connectorised/Crimped Along With Protective Accessories For Protection Against Abrasion And Grouped According To Area Of Use. Pl Refer Clause 4.17.2 (Xiii) Of Rdso Specification In This Regard. (One Set Per Rake), (A) Complete Pre-Fabricated Drivers Desk And Cab Equipment. The Cab Shall Include All The Cab Equipments E.G. Combined Master-Cum-Brake Controller, Instrument Panel With Back-Lit Instruments, Gauges For Pneumatic Indications, Control Panels, Drivers Diagnostic Display Unit & Drivers Log In Device, Driver And Guard Seat Etc., Ergonomically Designed Driver Desk/Console, Pre-Wired And Terminated On A Terminal Board And Multi-Pin Plugs/Sockets For Inter-Equipment Connections. The Cab-Equipment Shall Also Include Pneumatic Horns, Electric Motor Driven Wind Screen Wipers, Sun Screens, Head Light, Auxiliary Head Light Cum Tail Light, Flasher Light, Safety Related Equipments Like Bell Code System. All The Above Equipment Shall Include Termination Crimping Lugs, Cable Markers With Heat Shrinkable Sleeves For Power And Control Cables, Equipment Mounting And Earthing Hardware And Accessories. (One Set Per Dtc). (B) Complete Pre- Fabricated And Prewired Shunting Desk Assembled With Master Cum Brake Controller,Instrument Panel With Back-Lit Instruments, Necessary Control Switch Gear, Terminal Board And Multi-Pin Plugs/Sockets For Inter-Equipment Connections In Motor Coaches, Termination Crimping Lugs, Cable Markers With Heat Shrinkable Sleeves For Power And Control Cables, Equipment Mounting And Earthing Hardware And Accessories. (One Set Per Mc) Note : Quantity Is 16 Sets Each For (A) And (B)., Led Lights Including Emergency Lights And Ac Fans For Passenger Area (450 Mm Sweep), And Bldc Fans (400 Mm Sweep) For Drivers Cab And Ht And Lt Compartments, Alarm Mechanism Having Push Button And Led Indication With Transparent Polycarbonate Enclosure & External Led Indicator(Pail-Passenger Alarm Indication Light) With Release Push Button With Ss Enclosure On Either Side Of The Coach, Buzzers/Hooters For Ladies And Handicap Compartments/Coaches In Case Of Alarm And Modular Type Switches For Fans, Including Mounting Hardware And Accessories. (One Set Per Rake), Set Of Mcbs, Contactors, Relays Etc. For Propulsion System, Control, Auxiliary Etc. In Prewired And Assembled Condition With Modular Type Panels Including Termination Crimping Lugs, Cable Markers With Heat Shrinkable Sleeves For Power And Control Cables, Equipment Mounting And Earthing Hardware And Accessories (One Set Per Rake), Parking Brake Equipment Complete With Control, Associated Valves & Wiring Etc., As Per Clause 4.12.8 Of Rdso Specification. (One Set Per Rake), Apc Receiver Compatible With Track Magnets. (One Set Per Rake), Load Weighing Sensors With Adequate Redundancies As Per Clause 4.12.10 Of Rdso Specification. (One Set Per Rake), Passenger Information Comprising Double Front Led Destination Board In Dtcs (Head Code) And Communication System Including 2 Nos. Of Single Side & 2 Nos. Of Double Side Display Units Per Coach For Passenger Area, Loud Speakers, Gps Antenna Etc., As Per Clause No. 4.6.2 Of Rdso Specification Including Termination Crimping Lugs, Cable Markers With Heat Shrinkable Sleeves For Power And Control Cables, Equipment Mounting And Earthing Hardware And Accessories. (One Set Per Rake), Inter Vehicular Coupler Assembly Complete With Connectors As Per Clause No. 4.17.4 Of Rdso Specification Including Termination Crimping Lugs, Cable Markers With Heat Shrinkable Sleeves And Mounting & Earthing Hardware And Other Associated Accessories. (One Set Per Rake), Speed Indicating Cum Recording System As Per Clause No. 4.9.4 Of Rdso Specification. (One Set Per Dtc), Set Of Air Filters For Ht Compartment In Shunting Cabs As Per Clause No. 4.14.18 Of Rdso Specification Including Sealing System And Mounting Hardware Etc. (One Set Per Mc), Set Of Potential Transformer & Current Transformer As Per Clause No. 4.1.8 Of Rdso Specification. (One Set Per Basic Unit), Tower/Roof Mounted Cab Air-Conditioning Unit (2.0Tr Min) With Control Panel Along With Mounting Frame And Anchoring Arrangement To Coach Body And All The Accessories/Hardware Generally Conforming To Icf Specification No. Icf/Elec/110, Cs-1& 2 Or Rdso Specification No. Rdso/2007/El/Spec/0055 (Rev- 1).However Roof Mounted Cab Ac Shall Be Preferred. (One Set Per Dtc), Provision Of Networking System Including Cctv Cameras In All Coaches And Emergency Talk Back Units ( For Ladies Compartment),Nvrs, Front Camera And Rear View Cameras In Dtcs , Display Unit In The Driving Cabs, Gps Antenna Etc., Generally Conforming To Icf Specification Icf/Elec/166 (Rev.00). (One Set Per Rake), Cable Transit System With Epdm Rubber Modules As Per Clause No. 4.17.2 (Xii) Of Rdso Specification And Conforming To Rdso/2008/El/Spec/0067 (Rev 2) Of January 2015 For Cable Entry From Underframe /Above Roof/End Wall To Passenger Compartment, Drivers Cab, Shunting Cab , Ht /Lt Compartment. (One Set Per Rake), Auxiliary Compressor With Mounting Frame ,Anti Vibration Mountings, Mounting Hardware And Accessories Etc.As Per Clause 4.14.14 Of Rdso Specification. (One Set Per Basic Unit), Design And Supply Of Trays For Laying Of Harnessed Cable Including Its Accessories As Per Clause 4.17.2(Xiii) Of Rdso Specification. (One Set Per Rake), Instrumentation Required For Commissioning And Field Testing Of The Equipment (May Be Taken By The Supplier After Completion Of The Commissioning And Field Testing Activities) (One Set Per Rake)., Supervision Of Installation As Per 18.3 And Commissioning As Per Item No. 18.4 Of Scc. (One Set Per Rake), Training Of Ir Personnel As Per Clause 18.7 At Suppliers Premises, Training Of Ir Personnel As Per Clause 18.7 At Icf/Other Railway Works, Laptops With Necessary Interfacing Equipment For Diagnostics., Special Tools For Assembly/Disassembly Of Traction Motor Including Equipment For Extraction Of Pinion & Bearing., Testing Kit For Traction Motor (Vvvf Control Test)., Lifting Frames And Special Fixtures For Equipment Viz., Traction/Auxiliary Converter & Transformer., Traction Transformer Complete With Cooling System & Accessories Like H.T Cable Along With Protection Shield In Passenger Compartment If Required, Thermostat Etc. Related Protection Equipment And With Safety Chain Arrangement Including Termination Crimping Lugs, Cable Markers With Heat Shrinkable Sleeves For Power And Control Cables, Equipment Mounting And Earthing Hardware And Accessories Including Oil Pump, Oil Cooling Blowers Etc. (One Set Per Basic Unit), Igbt Based Pwm Power Converter Inverter Complete With Dc Link With 100 Hz Resonance Filter And /Or Any Other Equipment Necessary To Reduce The Effect Of Other Harmonics On S&T Equipment, Pre-Charging Resistor, Braking Resistor And Associated Power/Control Contactors, Filters Required For Harmonic Suppression, Microprocessor Based Controls, Power & Control Cables Including Cooling System With Accessories Such As Equipment Anchoring Arrangement To Coach Body & Ht Compartment Interlock System Including Termination Crimping Lugs, Cable Markers With Heat Shrinkable Sleeves For Power And Control Cables, Equipment Mounting And Earthing Hardware And Accessories Including Brake Control Electronics Complete System Fulfilling The Brake Blending Requirements Including Wheel Slip/Slide Protection And Anti Skid Controls As Per Clause 4.12 (4.12.1 To 4.12.7) Of Rdso Specification And Auxilary Machines As Required (One Set Per Motor Coach)., Auxiliary Converter, Igbt Based, Complete With Cooling System And Accessories For Supply To Auxiliary Machines Including Motor Compressor Set, Battery Charging, Lighting And Ventilation Of 3 Car Unit And Lighting/ Ventilation Of Adjacent 3 Car Unit In Case Of Extended Auxiliary Load Including Termination Crimping Lugs, Cable Markers With Heat Shrinkable Sleeves For Power And Control Cables, With Accessories Such As Equipment Anchoring Arrangement To Coach Body , Equipment Mounting And Earthing Hardware And Accessories Including Auxiliary Machines As Required. (One Set Per Basic Unit), Asynchronous Axle Hung Nose Suspended Traction Motors With Roller Bearing Suspension Compatible With Pinion, Gear, Gear Case, Nose Suspension Block And All Associated Hardware, Air Bellows/Air Filters And Speed/Temperature Sensor Including Termination Crimping Lugs, Cable Markers With Heat Shrinkable Sleeves For Power And Control Cables, Equipment Mounting And Earthing Hardware And Accessories., Combined Master & Brake Controller With Accessories. (One Set Per Dtc), Set Of Brake Equipment Including Electronic Cards Etc. & Parking Brake Equipment: A) Becu B) Brake Blending Equipment C) Parking Brake, Main Compressor (Splash Lubricated/Oil Free) With Three Phase Induction Motor Including Pressure Switches, Controls & Air Dryer. Etc., As Per Clause 4.14.17 Of Rdso Specification Offered Type Of Compressor Shall Be Supplied. (One Set Per Mc), Set Of Air Filters (One Set Per Mc), Set Of Mcbs, Contactors, Relays Etc. For Propulsion System, Control, Auxiliary Etc. In Prewired And Assembled Condition With Modular Type Panels Including Termination Crimping Lugs, Cable Markers With Heat Shrinkable Sleeves For Power And Control Cables, Equipment Mounting And Earthing Hardware And Accessories (One Set Per Basic Unit), Gapless Lightning Arrestors As Per Clause 4.2 Of Rdso Specification. (One Set Per Basic Unit), Vacuum Circuit Breaker (Ac) With Earthing Switch And Ht Door Interlocks. (One Set Per Basic Unit), Pantograph Complete Suitable For Ac Application With Mounting Insulators And Necessary Control Valves And Isolating Cocks Including Interconnecting Bus Bars And Associated Hardware For Roof Equipment. (One Set Per Basic Unit), Led Based Light Fittings Including Passenger Compartment Light Fittings, Head Lights, Flasher Lights And Auxiliary Head Light Cum Tail Lamp With Control Unit & Fans. (One Set Per Dtc), Tower/Roof Mounted Cab Air-Conditioning Unit (2.0Tr Min) With Control Panel Along With Mounting Frame And Anchoring Arrangement To Coach Body And All The Accessories/Hardware Generally Conforming To Icf Specification No. Icf/Elec/110, Cs-1& 2 Or Rdso Specification No. Rdso/2007/El/Spec/0055 (Rev-1). However Roof Mounted Cab Ac Shall Be Preferred. (One Set Per Dtc), Set Of Coach Display Units ( 2 Nos. Of Single Side & 2 Nos. Of Double Side) Along With Double Front Head Code (One Set Per Dtc), Cctv With Nvr (One Set Per Tc)
